dmesg - 2
microcode: CPU0 microcode updated early to revision 0xba, date = 2010-10-03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-35-generic (buildd@lgw01-43) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #40-Ubuntu SMP Tue Mar 15 22:15:45 UTC 2016 (Ubuntu 4.2.0-35.40-generic 4.2.8-ckt5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P35-DS4/P35-DS4, BIOS F9 11/30/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
total RAM covered: 2047M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
found SMP MP-table at [mem 0x000f5110-0x000f511f] mapped at [ffff8800000f5110]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x021f1000, 0x021f1fff] PGTABLE
BRK [0x021f2000, 0x021f2fff] PGTABLE
BRK [0x021f3000, 0x021f3fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x021f4000, 0x021f4fff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x7fbfffff]
[mem 0x60000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7fedffff]
[mem 0x7fe00000-0x7fedffff] page 4k
BRK [0x021f5000, 0x021f5fff] PGTABLE
RAMDISK: [mem 0x33514000-0x35a81fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B00 000014 (v00 GBT )
ACPI: RSDT 0x000000007FEE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x000000007FEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x000000007FEE3180 004B32 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x000000007FEE0000 000040
ACPI: HPET 0x000000007FEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x000000007FEE7E80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 0x000000007FEE7D00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x000000007FEE7F00 00015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 0x000000007FEE8390 000275 (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fedffff]
NODE_DATA(0) allocated [mem 0x7fedb000-0x7fedffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007fedffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007fedffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007fedffff]
On node 0 totalpages: 523902
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8124 pages used for memmap
DMA32 zone: 519904 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88007fc00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515693
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2005232K/2095608K available (8182K kernel code, 1239K rwdata, 3804K rodata, 1464K init, 1292K bss, 90376K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2666.735 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.47 BogoMIPS (lpj=10666940)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
ftrace: allocating 30947 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0xba, date = 2010-10-03
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10666.94 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 23:08:40, date: 04/12/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007C945840 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff window]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xd100-0xd11f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xd500-0xd51f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf9201000-0xf92013ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xd200-0xd21f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xd300-0xd31f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xd400-0xd41f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf9200000-0xf92003ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xd600-0xd607]
pci 0000:00:1f.2: reg 0x14: [io 0xd700-0xd703]
pci 0000:00:1f.2: reg 0x18: [io 0xd800-0xd807]
pci 0000:00:1f.2: reg 0x1c: [io 0xd900-0xd903]
pci 0000:00:1f.2: reg 0x20: [io 0xda00-0xda0f]
pci 0000:00:1f.2: reg 0x24: [io 0xdb00-0xdb0f]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf9202000-0xf92020ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xdd00-0xdd07]
pci 0000:00:1f.5: reg 0x14: [io 0xde00-0xde03]
pci 0000:00:1f.5: reg 0x18: [io 0xdf00-0xdf07]
pci 0000:00:1f.5: reg 0x1c: [io 0xe000-0xe003]
pci 0000:00:1f.5: reg 0x20: [io 0xe100-0xe10f]
pci 0000:00:1f.5: reg 0x24: [io 0xe200-0xe20f]
pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x9000-0x907f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf6000000-0xf6003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
pci 0000:03:00.0: reg 0x24: [mem 0xf9000000-0xf9001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io 0xa000-0xa007]
pci 0000:03:00.1: reg 0x14: [io 0xa100-0xa103]
pci 0000:03:00.1: reg 0x18: [io 0xa200-0xa207]
pci 0000:03:00.1: reg 0x1c: [io 0xa300-0xa303]
pci 0000:03:00.1: reg 0x20: [io 0xa400-0xa40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xf90fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf8000000-0xf8000fff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf7000000-0xf8ffffff]
pci 0000:05:00.0: [13f6:0111] type 00 class 0x040100
pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:06.0: [104c:8024] type 00 class 0x0c0010
pci 0000:05:06.0: reg 0x10: [mem 0xf9104000-0xf91047ff]
pci 0000:05:06.0: reg 0x14: [mem 0xf9100000-0xf9103fff]
pci 0000:05:06.0: supports D1 D2
pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xf9100000-0xf91fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:07: [io 0x0400-0x04bf] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000ce400-0x000cffff] has been reserved
system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0x7fee0000-0x7fefffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x7fedffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x7ff00000-0x800fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0x80500000-0x806fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf507ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.0: bridge window [mem 0x7ff00000-0x800fffff]
pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xf90fffff]
pci 0000:00:1c.4: bridge window [mem 0x80300000-0x804fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf7000000-0xf700ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf7000000-0xf8ffffff]
pci 0000:00:1c.5: bridge window [mem 0x80500000-0x806fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xf9100000-0xf91fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0x7ff00000-0x800fffff]
pci_bus 0000:02: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff]
pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf8ffffff]
pci_bus 0000:04: resource 2 [mem 0x80500000-0x806fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf9100000-0xf91fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 38328K (ffff880033514000 - ffff880035a82000)
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xba
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xba
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1460502519.724:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90000400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xd600 ctl 0xd700 bmdma 0xda00 irq 19
ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd900 bmdma 0xda08 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xdd00 ctl 0xde00 bmdma 0xe100 irq 19
ata4: SATA max UDMA/133 cmd 0xdf00 ctl 0xe000 bmdma 0xe108 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9201000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9200000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-35-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-35-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d100
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-35-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d500
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-35-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d200
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-35-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d300
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-35-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.2.0-35-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d2cd13f45fa3b012fc89b8d500f91dcca4d9e0a8'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 12:394:150
bdi 1:2: hash matches
platform INT0800:00: hash matches
acpi INT0800:00: hash matches
rtc_cmos 00:01: setting system clock to 2016-04-12 23:08:41 UTC (1460502521)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-5: new high-speed USB device number 2 using ehci-pci
usb 2-5: New USB device found, idVendor=0458, idProduct=7089
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: FaceCam VGA
usb 2-5: Manufacturer: KYE Systems Corp.
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: HPA detected: current 1953523055, native 1953525168
ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2044K (ffff880001801000 - ffff880001a00000)
Freeing unused kernel memory: 292K (ffff880001db7000 - ffff880001e00000)
random: systemd-udevd urandom read with 13 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
Floppy drive(s): fd0 is 1.44M
ahci 0000:03:00.0: version 3.0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
FDC 0 is a post-1991 82077
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xffffc900003c2000, 00:1a:4d:50:fc:54, XID 18000000 IRQ 28
r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
nvidia: module verification failed: signature and/or required key missing - tainting kernel
scsi host4: ahci
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 248
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 364.15 Sat Apr 2 21:30:33 PDT 2016
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 364.15 Sat Apr 2 20:53:38 PDT 2016
scsi host5: ahci
ata5: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 16
ata6: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 16
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
scsi host6: pata_jmicron
scsi host7: pata_jmicron
ata7: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 17
ata8: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 17
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
tsc: Refined TSC clocksource calibration: 2666.666 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
r8169 0000:04:00.0 enp4s0: renamed from eth0
firewire_ohci 0000:05:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-H42L, SL00, max UDMA/66
ata7.00: configured for UDMA/66
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H42L SL00 PQ: 0 ANSI: 5
sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg1 type 5
firewire_core 0000:05:06.0: created device fw0: GUID 00c68a7e00001a4d, S400
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
random: nonblocking pool is initialized
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
ppdev: user-space parallel port driver
systemd[1]: Started udev Coldplug all Devices.
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
systemd-journald[233]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
gpio_ich: GPIO from 451 to 511 on gpio_ich
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
media: Linux media interface: v0.10
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
uvcvideo: Found UVC 1.00 device FaceCam VGA (0458:7089)
input: FaceCam VGA as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
nvidia-uvm: Loaded the UVM driver in lite mode, major device number 245
Adding 2093052k swap on /dev/sda5. Priority:-1 extents:1 across:2093052k FS
audit: type=1400 audit(1460491733.654:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.654:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.714:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.714:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.714:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.714:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.938:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.938:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.938:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=442 comm="apparmor_parser"
audit: type=1400 audit(1460491733.938:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=442 comm="apparmor_parser"
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
nvidia-modeset: Allocated GPU:0 (GPU-9d5a8b74-7a08-cf51-c2ab-0bcb4f740bf9) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 5
snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (10200 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10148 > 10000), lowering kernel.perf_event_max_sample_rate to 12500