dmesg - test2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.5-1-MANJARO (builduser@manjaro) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Thu Mar 10 20:58:34 UTC 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000005ad80fff] usable
BIOS-e820: [mem 0x000000005ad81000-0x000000005b8effff] reserved
BIOS-e820: [mem 0x000000005b8f0000-0x000000005bbb8fff] usable
BIOS-e820: [mem 0x000000005bbb9000-0x000000005c770fff] ACPI NVS
BIOS-e820: [mem 0x000000005c771000-0x000000005cfbbfff] reserved
BIOS-e820: [mem 0x000000005cfbc000-0x000000005cfe5fff] usable
BIOS-e820: [mem 0x000000005cfe6000-0x000000005cfe6fff] reserved
BIOS-e820: [mem 0x000000005cfe7000-0x000000005cfe9fff] usable
BIOS-e820: [mem 0x000000005cfea000-0x000000005cfeafff] reserved
BIOS-e820: [mem 0x000000005cfeb000-0x000000005cfebfff] usable
BIOS-e820: [mem 0x000000005cfec000-0x000000005d071fff] reserved
BIOS-e820: [mem 0x000000005d072000-0x000000005d289fff] usable
BIOS-e820: [mem 0x000000005d28a000-0x000000005dff8fff] reserved
BIOS-e820: [mem 0x000000005dff9000-0x000000005dffffff] usable
BIOS-e820: [mem 0x0000000060000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000049fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X99E-ITX/ac, BIOS P1.50 01/05/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4a0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000060000000 mask 3FFFE0000000 uncachable
2 base 380000000000 mask 3FC000000000 uncachable
3 base 00005F000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 base 0000F0000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x5e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc550-0x000fc55f] mapped at [ffff8800000fc550]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01b41000, 0x01b41fff] PGTABLE
BRK [0x01b42000, 0x01b42fff] PGTABLE
BRK [0x01b43000, 0x01b43fff] PGTABLE
BRK [0x01b44000, 0x01b44fff] PGTABLE
BRK [0x01b45000, 0x01b45fff] PGTABLE
BRK [0x01b46000, 0x01b46fff] PGTABLE
RAMDISK: [mem 0x37757000-0x37ba2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005C3DD090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005C406EE8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005C3DD1D0 029D11 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000005C76DF80 000040
ACPI: APIC 0x000000005C406FF8 000250 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005C407248 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005C407290 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000005C407330 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x000000005C407370 000042 (v01 00000000 00000000)
ACPI: BDAT 0x000000005C4073B8 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000005C4073E8 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000005C407420 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x000000005C4074B0 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x000000005C407518 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000005C407548 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000005C4083A0 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000005C4083E0 00D41F (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: AAFT 0x000000005C415800 0002B1 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: ASF! 0x000000005C415AB8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x20 -> Node 0
SRAT: PXM 0 -> APIC 0x22 -> Node 0
SRAT: PXM 0 -> APIC 0x24 -> Node 0
SRAT: PXM 0 -> APIC 0x26 -> Node 0
SRAT: PXM 0 -> APIC 0x28 -> Node 0
SRAT: PXM 0 -> APIC 0x30 -> Node 0
SRAT: PXM 0 -> APIC 0x32 -> Node 0
SRAT: PXM 0 -> APIC 0x34 -> Node 0
SRAT: PXM 0 -> APIC 0x36 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x21 -> Node 0
SRAT: PXM 0 -> APIC 0x23 -> Node 0
SRAT: PXM 0 -> APIC 0x25 -> Node 0
SRAT: PXM 0 -> APIC 0x27 -> Node 0
SRAT: PXM 0 -> APIC 0x29 -> Node 0
SRAT: PXM 0 -> APIC 0x31 -> Node 0
SRAT: PXM 0 -> APIC 0x33 -> Node 0
SRAT: PXM 0 -> APIC 0x35 -> Node 0
SRAT: PXM 0 -> APIC 0x37 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x49fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x5fffffff] + [mem 0x100000000-0x49fffffff] -> [mem 0x00000000-0x49fffffff]
NODE_DATA(0) allocated [mem 0x49fff5000-0x49fff8fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000049fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000005ad80fff]
node 0: [mem 0x000000005b8f0000-0x000000005bbb8fff]
node 0: [mem 0x000000005cfbc000-0x000000005cfe5fff]
node 0: [mem 0x000000005cfe7000-0x000000005cfe9fff]
node 0: [mem 0x000000005cfeb000-0x000000005cfebfff]
node 0: [mem 0x000000005d072000-0x000000005d289fff]
node 0: [mem 0x000000005dff9000-0x000000005dffffff]
node 0: [mem 0x0000000100000000-0x000000049fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000049fffffff]
On node 0 totalpages: 4174388
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 5771 pages used for memmap
DMA32 zone: 369303 pages, LIFO batch:31
Normal zone: 59392 pages used for memmap
Normal zone: 3801088 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x28] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x30] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x32] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x34] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x36] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x29] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x31] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x33] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x35] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x37] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 36 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x5ad81000-0x5b8effff]
PM: Registered nosave memory: [mem 0x5bbb9000-0x5c770fff]
PM: Registered nosave memory: [mem 0x5c771000-0x5cfbbfff]
PM: Registered nosave memory: [mem 0x5cfe6000-0x5cfe6fff]
PM: Registered nosave memory: [mem 0x5cfea000-0x5cfeafff]
PM: Registered nosave memory: [mem 0x5cfec000-0x5d071fff]
PM: Registered nosave memory: [mem 0x5d28a000-0x5dff8fff]
PM: Registered nosave memory: [mem 0x5e000000-0x5fffffff]
PM: Registered nosave memory: [mem 0x60000000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:36 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88048f000000 s92696 r8192 d30184 u131072
pcpu-alloc: s92696 r8192 d30184 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 -- -- -- -- -- -- -- -- -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109140
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16348424K/16697552K available (5777K kernel code, 948K rwdata, 1828K rodata, 1192K init, 1156K bss, 349128K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=36, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=36.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=36
NR_IRQS:8448 nr_irqs:1120 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2099.780 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4201.54 BogoMIPS (lpj=6999266)
pid_max: default: 36864 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys bfqio
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
ftrace: allocating 22980 entries in 90 pages
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2686 v3 @ 2.00GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35
x86: Booted up 1 node, 36 CPUs
smpboot: Total of 36 processors activated (151244.48 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x5bbb9000-0x5c770fff] (12288000 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 3:04:06, date: 03/17/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:2fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:2feb] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:2fec] type 00 class 0x088000
pci 0000:ff:0d.5: [8086:2fed] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:2fee] type 00 class 0x088000
pci 0000:ff:0d.7: [8086:2fef] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:2ff0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:2ff1] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb13e000-0xfb13efff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb13d000-0xfb13d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb120000-0xfb12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb13c000-0xfb13c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb139000-0xfb139fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb138000-0xfb1383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb130000-0xfb133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb137000-0xfb1373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb136000-0xfb1367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb135000-0xfb1350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xfb700000-0xfb71ffff]
pci 0000:01:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 0x1c: [mem 0xfb720000-0xfb723fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:02:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:02:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfb600000-0xfb607fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:05:00.0: [14e4:43b1] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xfb200000-0xfb3fffff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb4fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x5ad81000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5bbb9000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5cfe6000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5cfea000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5cfec000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5d28a000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0280-0x028f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: [io 0x02a0-0x02af] has been reserved
system 00:02: [io 0x02b0-0x02bf] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb4fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:05: resource 1 [mem 0xfb200000-0xfb4fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM
pci 0000:04:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4400K (ffff880037757000 - ffff880037ba3000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x56d81000-0x5ad81000] (64MB) mapped at [ffff880056d81000-ffff88005ad80fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
Scanning for low memory corruption every 60 seconds
futex hash table entries: 16384 (order: 8, 1048576 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
pmd_set_huge: Cannot satisfy [mem 0xf1000000-0xf1200000] with a huge-page mapping due to MTRR override.
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU16 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU17 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU18 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU19 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU20 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU21 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU22 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU23 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU24 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU25 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU26 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU27 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU28 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU29 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU30 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU31 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU32 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU33 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU34 sig=0x306f2, pf=0x1, revision=0x29
microcode: CPU35 sig=0x306f2, pf=0x1, revision=0x29
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 8:87:58
rtc_cmos 00:00: setting system clock to 2016-03-17 03:04:06 UTC (1458183846)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1192K (ffffffff818ef000 - ffffffff81a19000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 356K (ffff8800015a7000 - ffff880001600000)
Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
random: systemd-tmpfile urandom read with 2 bits of entropy available
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: SSS flag set, parallel bus scan disabled
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq stag led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d100 irq 29
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136100 irq 30
ata6: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136180 irq 30
ata7: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136200 irq 30
ata8: DUMMY
ata9: DUMMY
ata10: DUMMY
xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133
ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata7.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata7.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata7.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata5.00: disabling queued TRIM support
ata7.00: configured for UDMA/133
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA WDC WD40EZRX-00S 0A80 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sda: sda1 sda2 sda3 sda4
sd 6:0:0:0: [sdc] Attached SCSI disk
sd 4:0:0:0: [sda] Attached SCSI disk
usb 3-3: new full-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2099.633 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e43d5c2541, max_idle_ns: 440795221112 ns
hub 1-1:1.0: USB hub found
sdb: sdb1 sdb2
hub 1-1:1.0: 6 ports detected
sd 5:0:0:0: [sdb] Attached SCSI disk
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-9: new low-speed USB device number 3 using xhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 8:34 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /usr/lib/systemd/system/xboxdrv.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Reached target Login Prompts.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
usb 3-11: new full-speed USB device number 4 using xhci_hcd
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on LVM2 metadata daemon socket.
EXT4-fs (sdc1): re-mounted. Opts: discard
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
vboxdrv: Found 36 processor cores
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 380 (systemd-binfmt)
vboxdrv: TSC mode is Invariant, tentative frequency 2099419016 Hz
vboxdrv: Successfully loaded version 5.0.14_OSE (interface 0x00240000)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create Static Device Nodes in /dev...
vboxpci: IOMMU not found (not registered)
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Set Up Additional Binary Formats.
[drm] Initialized drm 1.1.0 20060810
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting /tmp...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Mounted /tmp.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
systemd[1]: Started udev Coldplug all Devices.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
systemd[1]: Starting Show Plymouth Boot Screen...
FS-Cache: Loaded
systemd[1]: Started udev Kernel Device Manager.
wmi: Mapper loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Apply Kernel Variables.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
dca service started, version 1.12.1
EDAC MC: Ver: 3.0.0
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
systemd[1]: Found device Samsung_SSD_850_EVO_250GB 2.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
pps pps0: new PPS source ptp0
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:50:99:74:65:47
igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:01:00.0 ens6: renamed from eth0
kvm: disabled by bios
systemd[1]: Started Journal Service.
usb 3-13: new full-speed USB device number 5 using xhci_hcd
systemd-journald[397]: Received request to flush runtime journal from PID 1
clocksource: Switched to clocksource tsc
Adding 17747644k swap on /dev/sdc2. Priority:-1 extents:1 across:17747644k SSDscFS
kvm: disabled by bios
intel_rapl: Found RAPL domain package
wl0: online cpus 1
wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
wl 0000:05:00.0 wlp5s0: renamed from wlan0
random: nonblocking pool is initialized
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:74:65:43
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
e1000e 0000:00:19.0 enp0s25: renamed from eth0
nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram: Added device: zram8
zram: Added device: zram9
zram: Added device: zram10
zram: Added device: zram11
zram: Added device: zram12
zram: Added device: zram13
zram: Added device: zram14
zram: Added device: zram15
zram: Added device: zram16
zram: Added device: zram17
zram: Added device: zram18
zram: Added device: zram19
zram: Added device: zram20
zram: Added device: zram21
zram: Added device: zram22
zram: Added device: zram23
zram: Added device: zram24
zram: Added device: zram25
zram: Added device: zram26
zram: Added device: zram27
zram: Added device: zram28
zram: Added device: zram29
zram: Added device: zram30
zram: Added device: zram31
zram: Added device: zram32
zram: Added device: zram33
zram: Added device: zram34
zram: Added device: zram35
zram0: detected capacity change from 0 to 93040640
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input13
zram1: detected capacity change from 0 to 93040640
zram2: detected capacity change from 0 to 93040640
zram3: detected capacity change from 0 to 93040640
zram4: detected capacity change from 0 to 93040640
zram5: detected capacity change from 0 to 93040640
zram6: detected capacity change from 0 to 93040640
zram7: detected capacity change from 0 to 93040640
zram8: detected capacity change from 0 to 93040640
zram9: detected capacity change from 0 to 93040640
zram10: detected capacity change from 0 to 93040640
zram11: detected capacity change from 0 to 93040640
IPv6: ADDRCONF(NETDEV_UP): ens6: link is not ready
zram12: detected capacity change from 0 to 93040640
zram13: detected capacity change from 0 to 93040640
zram14: detected capacity change from 0 to 93040640
zram15: detected capacity change from 0 to 93040640
zram16: detected capacity change from 0 to 93040640
zram17: detected capacity change from 0 to 93040640
zram18: detected capacity change from 0 to 93040640
zram19: detected capacity change from 0 to 93040640
zram20: detected capacity change from 0 to 93040640
zram21: detected capacity change from 0 to 93040640
zram22: detected capacity change from 0 to 93040640
zram23: detected capacity change from 0 to 93040640
zram24: detected capacity change from 0 to 93040640
zram25: detected capacity change from 0 to 93040640
zram26: detected capacity change from 0 to 93040640
zram27: detected capacity change from 0 to 93040640
zram28: detected capacity change from 0 to 93040640
zram29: detected capacity change from 0 to 93040640
zram30: detected capacity change from 0 to 93040640
zram31: detected capacity change from 0 to 93040640
zram32: detected capacity change from 0 to 93040640
zram33: detected capacity change from 0 to 93040640
zram34: detected capacity change from 0 to 93040640
zram35: detected capacity change from 0 to 93040640
Adding 90856k swap on /dev/zram0. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram1. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram2. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram3. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram4. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram5. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram6. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram7. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram8. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram9. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram10. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram11. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram12. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram13. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram14. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram15. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram16. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram17. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram18. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram19. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram20. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram21. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram22. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram23. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram24. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram25. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram26. Priority:100 extents:1 across:90856k SSFS
Adding 90856k swap on /dev/zram27. Priority:100 extents:1 across:90856k SSFS
IPv6: ADDRCONF(NETDEV_UP): ens6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input17
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
Non-volatile memory driver v1.3
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver steamos-xpad
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:04D9:4545.0001/input/input18
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13/input2
Bluetooth: hci0: DESKTOP-9S8PBBV
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1479
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-13d3-3404.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-13d3-3404.hcd not found
hid-generic 0003:04D9:4545.0001: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:04D9:4545.0002/input/input19
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
hid-generic 0003:04D9:4545.0002: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9/input1
logitech-hidpp-device 0003:046D:402D.0006: error in parameter
logitech-hidpp-device 0003:046D:402D.0006: hidraw3: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:14.0-13:1
logitech-hidpp-device 0003:046D:402D.0006: error in parameter
logitech-hidpp-device 0003:046D:402D.0006: error in parameter
input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.2/0003:046D:C52B.0005/0003:046D:402D.0006/input/input20
mousedev: PS/2 mouse device common for all mice
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
igb 0000:01:00.0 ens6: igb: ens6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): ens6: link becomes ready
fuse init (API version 7.23)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
mce: [Hardware Error]: Machine check events logged