dmesg - test
microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-28-generic (buildd@lgw01-26) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #33~14.04.1-Ubuntu SMP Thu Feb 4 12:26:42 UTC 2016 (Ubuntu 4.2.0-28.33~14.04.1-generic 4.2.8-ckt3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76afff] usable
BIOS-e820: [mem 0x00000000bb76b000-0x00000000bb776fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb777000-0x00000000bb779fff] ACPI data
BIOS-e820: [mem 0x00000000bb77a000-0x00000000bb780fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb781000-0x00000000bb781fff] ACPI data
BIOS-e820: [mem 0x00000000bb782000-0x00000000bb78afff] ACPI NVS
BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 3093BU3/3093BU3, BIOS 6QET70WW (1.40 ) 10/11/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 disabled
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FC0000000 write-back
5 base 23C000000 mask FFC000000 uncachable
6 base 0BC000000 mask FFC000000 uncachable
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 1GB, type WB
reg 5, base: 9152MB, range: 64MB, type UC
reg 6, base: 3008MB, range: 64MB, type UC
total RAM covered: 8064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3008MB, range: 64MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 1GB, type WB
reg 5, base: 9152MB, range: 64MB, type UC
e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6910-0x000f691f] mapped at [ffff8800000f6910]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[mem 0x23be00000-0x23bffffff] page 2M
BRK [0x01ff6000, 0x01ff6fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23bdfffff]
[mem 0x220000000-0x23bdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbb1fffff] page 2M
[mem 0xbb200000-0xbb27bfff] page 4k
init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[mem 0xbb282000-0xbb35efff] page 4k
init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[mem 0xbb40f000-0xbb46efff] page 4k
BRK [0x01ff7000, 0x01ff7fff] PGTABLE
init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[mem 0xbb70f000-0xbb716fff] page 4k
BRK [0x01ff8000, 0x01ff8fff] PGTABLE
init_memory_mapping: [mem 0xbb71f000-0xbb76afff]
[mem 0xbb71f000-0xbb76afff] page 4k
init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[mem 0xbb7ff000-0xbb7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[mem 0x100000000-0x1fbffffff] page 2M
RAMDISK: [mem 0x33602000-0x35af8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F68E0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BB7F080E 00009C (v01 LENOVO TP-6Q 00001400 LTP 00000000)
ACPI: FACP 0x00000000BB7F0900 0000F4 (v04 LENOVO TP-6Q 00001400 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150619/tbfadt-623)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150619/tbfadt-704)
ACPI: DSDT 0x00000000BB7F0C6B 00DE88 (v01 LENOVO TP-6Q 00001400 MSFT 03000001)
ACPI: FACS 0x00000000BB6E7000 000040
ACPI: FACS 0x00000000BB6E7000 000040
ACPI: SSDT 0x00000000BB7F0AB4 0001B7 (v01 LENOVO TP-6Q 00001400 MSFT 03000001)
ACPI: ECDT 0x00000000BB7FEAF3 000052 (v01 LENOVO TP-6Q 00001400 LNVO 00000001)
ACPI: APIC 0x00000000BB7FEB45 000084 (v01 LENOVO TP-6Q 00001400 LNVO 00000001)
ACPI: MCFG 0x00000000BB7FEC01 00003C (v01 LENOVO TP-6Q 00001400 LNVO 00000001)
ACPI: HPET 0x00000000BB7FEC3D 000038 (v01 LENOVO TP-6Q 00001400 LNVO 00000001)
ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6Q 00001400 PTL 00000001)
ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6Q 00001400 LTP 00000000)
ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6Q 00001400 LTP 00000001)
ACPI: SSDT 0x00000000BB6E590A 00085B (v01 LENOVO TP-6Q 00001400 INTL 20050513)
ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000 00005A52)
ACPI: DMAR 0x00000000BB781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001)
ACPI: SSDT 0x00000000BB779000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BB778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
ACPI: SSDT 0x00000000BB777000 00049F (v01 PmRef ApTst 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
NODE_DATA(0) allocated [mem 0x23bff4000-0x23bff8fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bb27bfff]
node 0: [mem 0x00000000bb282000-0x00000000bb35efff]
node 0: [mem 0x00000000bb40f000-0x00000000bb46efff]
node 0: [mem 0x00000000bb70f000-0x00000000bb716fff]
node 0: [mem 0x00000000bb71f000-0x00000000bb76afff]
node 0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
node 0: [mem 0x0000000100000000-0x00000001fbffffff]
node 0: [mem 0x0000000200000000-0x000000023bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
On node 0 totalpages: 2044843
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11921 pages used for memmap
DMA32 zone: 762894 pages, LIFO batch:31
Normal zone: 20224 pages used for memmap
Normal zone: 1277952 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb27c000-0xbb281fff]
PM: Registered nosave memory: [mem 0xbb35f000-0xbb370fff]
PM: Registered nosave memory: [mem 0xbb371000-0xbb3f1fff]
PM: Registered nosave memory: [mem 0xbb3f2000-0xbb40efff]
PM: Registered nosave memory: [mem 0xbb46f000-0xbb667fff]
PM: Registered nosave memory: [mem 0xbb668000-0xbb6e7fff]
PM: Registered nosave memory: [mem 0xbb6e8000-0xbb70efff]
PM: Registered nosave memory: [mem 0xbb717000-0xbb71efff]
PM: Registered nosave memory: [mem 0xbb76b000-0xbb776fff]
PM: Registered nosave memory: [mem 0xbb777000-0xbb779fff]
PM: Registered nosave memory: [mem 0xbb77a000-0xbb780fff]
PM: Registered nosave memory: [mem 0xbb781000-0xbb781fff]
PM: Registered nosave memory: [mem 0xbb782000-0xbb78afff]
PM: Registered nosave memory: [mem 0xbb78b000-0xbb78bfff]
PM: Registered nosave memory: [mem 0xbb78c000-0xbb79efff]
PM: Registered nosave memory: [mem 0xbb79f000-0xbb7fefff]
PM: Registered nosave memory: [mem 0xbb800000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafefff]
PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023bc00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2012613
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7927124K/8179372K available (7944K kernel code, 1243K rwdata, 3816K rodata, 1468K init, 1292K bss, 252248K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2127.841 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.68 BogoMIPS (lpj=8511364)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
ftrace: allocating 30984 entries in 122 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
DMAR: DRHD base: 0x000000fed91000 flags: 0x0
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
DMAR: DRHD base: 0x000000fed93000 flags: 0x1
DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
DMAR: RMRR base: 0x000000bb6e9000 end: 0x000000bb6fffff
DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU L 640 @ 2.13GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x4, date = 2013-06-28
#3[ 0.204220] x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17022.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
PM: Registering ACPI NVS region [mem 0xbb76b000-0xbb776fff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xbb77a000-0xbb780fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbb782000-0xbb78afff] (36864 bytes)
PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 22:47:31, date: 02/15/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x35 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880231D69000 0003EB (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802323E1000 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880231D69800 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880231D70000 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: Disabling batched IOTLB flush on Ironlake
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2727800-0xf272780f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf2525000-0xf2525fff]
pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf2728000-0xf27283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf2728400-0xf27287ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
pci 0000:00:1f.2: reg 0x14: [io 0x1814-0x1817]
pci 0000:00:1f.2: reg 0x18: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 0x1c: [io 0x1810-0x1813]
pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2727000-0xf27277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2728800-0xf27288ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf2526000-0xf2526fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 0d]
acpiphp: Slot [1] registered
pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xf1f00000-0xf1f07fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
pci 0000:02:00.0: [8086:4238] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb76b000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] could not be reserved
system 00:01: [io 0x1180-0x11ff] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x1641] has been reserved
system 00:01: [io 0x1644-0x167f] could not be reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0010 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs WACf00c (disabled)
pnp 00:06: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 0d]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0e]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 37852K (ffff880033602000 - ffff880035af9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1455576451.776:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4032k, total 4032k
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (48 C)
GHES: HEST is not enabled!
serial 00:05: [io 0x0200-0x0207]
serial 00:05: [irq 5]
serial 00:05: activated
00:05: ttyS4 at I/O 0x200 (irq = 5, base_baud = 921600) is a NS16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
tpm_tis 00:06: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-28-generic xhci-hcd
usb usb1: SerialNumber: 0000:05:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-28-generic xhci-hcd
usb usb2: SerialNumber: 0000:05:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2728000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-28-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2728400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-28-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: ae6ec85eeb32f95e49e4a51dc3dcbdb0d509c72d'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:06: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:672:805
rtc_cmos 00:02: setting system clock to 2016-02-15 22:47:32 UTC (1455576452)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1468K (ffffffff81d38000 - ffffffff81ea7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 236K (ffff8800017c5000 - ffff880001800000)
Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
systemd-udevd[120]: starting version 204
Non-volatile memory driver v1.3
thinkpad_acpi: Unknown symbol snd_ctl_add (err 0)
thinkpad_acpi: Unknown symbol snd_card_register (err 0)
thinkpad_acpi: Unknown symbol snd_card_free (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_new1 (err 0)
thinkpad_acpi: Unknown symbol snd_card_new (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_notify (err 0)
snd_hda_core: Unknown symbol snd_sgbuf_get_chunk_size (err 0)
snd_hda_core: Unknown symbol snd_pcm_format_width (err 0)
wmi: Mapper loaded
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 18, expected 21)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
thinkpad_acpi: Unknown symbol snd_ctl_add (err 0)
thinkpad_acpi: Unknown symbol snd_card_register (err 0)
thinkpad_acpi: Unknown symbol snd_card_free (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_new1 (err 0)
thinkpad_acpi: Unknown symbol snd_card_new (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_notify (err 0)
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
snd_hda_core: Unknown symbol snd_sgbuf_get_chunk_size (err 0)
PTP clock support registered
snd_hda_core: Unknown symbol snd_pcm_format_width (err 0)
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 29
SSE version of gcm_enc/dec engaged.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:3c:ee:ad
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 3-1: New USB device found, idVendor=8087, idProduct=0020
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0020
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Crucial_CT512MX100SSD1, MU01, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT512MX1 MU01 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1.1: new high-speed USB device number 3 using ehci-pci
usb 4-1.1: new high-speed USB device number 3 using ehci-pci
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=689e
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: Samsung Android USB Device
usb 3-1.1: Manufacturer: SAMSUNG Electronics Co., Ltd.
usb 3-1.1: SerialNumber: S5570df5ecdda
usb-storage 3-1.1:1.3: USB Mass Storage device detected
scsi host6: usb-storage 3-1.1:1.3
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 4-1.1: New USB device found, idVendor=0bda, idProduct=0159
usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.1: Product: USB2.0-CRW
usb 4-1.1: Manufacturer: Generic
usb 4-1.1: SerialNumber: 20071114173400000
ums-realtek 4-1.1:1.0: USB Mass Storage device detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX11, max UDMA/133
scsi host7: usb-storage 4-1.1:1.0
usbcore: registered new interface driver ums-realtek
ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2127.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac822addd, max_idle_ns: 440795285886 ns
usb 3-1.2: new full-speed USB device number 4 using ehci-pci
usb 4-1.2: new high-speed USB device number 4 using ehci-pci
usb 3-1.2: New USB device found, idVendor=047f, idProduct=0115
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: Voyager Legend
usb 3-1.2: Manufacturer: Plantronics
usb 3-1.2: SerialNumber: 8751b3f424f1e643886432bf22f67274
hidraw: raw HID events driver (C) Jiri Kosina
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX11 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..5164]
usb 4-1.2: New USB device found, idVendor=05c6, idProduct=f003
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.2: Product: PHICOMM_ENERGY
usb 4-1.2: Manufacturer: PHICOMM
usb 4-1.2: SerialNumber: E551Lt
usb-storage 4-1.2:1.1: USB Mass Storage device detected
scsi host8: usb-storage 4-1.2:1.1
usb 3-1.3: new full-speed USB device number 5 using ehci-pci
usb 4-1.4: new high-speed USB device number 5 using ehci-pci
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 616291
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 3-1.3: New USB device found, idVendor=0a5c, idProduct=217f
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.3: Product: Broadcom Bluetooth Device
usb 3-1.3: Manufacturer: Broadcom Corp
usb 3-1.3: SerialNumber: 5CAC4CC1689A
usb 4-1.4: config 1 has an invalid interface number: 1 but max is 0
usb 4-1.4: config 1 has no interface number 0
usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9204
usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 4-1.4: Product: Qualcomm Gobi 2000
usb 4-1.4: Manufacturer: Qualcomm Incorporated
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver qcserial
qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
usb 3-1.4: new full-speed USB device number 6 using ehci-pci
usb 3-1.4: New USB device found, idVendor=147e, idProduct=2016
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Biometric Coprocessor
usb 3-1.4: Manufacturer: UPEK
usb 3-1.5: new high-speed USB device number 7 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 3-1.5: New USB device found, idVendor=17ef, idProduct=1005
usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1.5:1.0: USB hub found
hub 3-1.5:1.0: 4 ports detected
usb 3-1.6: new high-speed USB device number 8 using ehci-pci
usb 3-1.6: New USB device found, idVendor=17ef, idProduct=4816
usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.6: Product: Integrated Camera
usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access SAMSUNG GT-S5570 Card 0100 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg3 type 0
clocksource: Switched to clocksource tsc
scsi 8:0:0:0: CD-ROM PHICOMM_ ENERGY 0310 PQ: 0 ANSI: 2
sr 8:0:0:0: [sr1] scsi-1 drive
sr 8:0:0:0: Attached scsi CD-ROM sr1
sr 8:0:0:0: Attached scsi generic sg4 type 5
sd 7:0:0:0: [sdc] 123795456 512-byte logical blocks: (63.3 GB/59.0 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2
sd 7:0:0:0: [sdc] Attached SCSI removable disk
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
thinkpad_acpi: Unknown symbol snd_ctl_add (err 0)
thinkpad_acpi: Unknown symbol snd_card_register (err 0)
thinkpad_acpi: Unknown symbol snd_card_free (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_new1 (err 0)
thinkpad_acpi: Unknown symbol snd_card_new (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_notify (err 0)
thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
thinkpad_ec: thinkpad_ec 0.41 loaded.
hdaps: LENOVO ThinkPad X201 Tablet detected, setting orientation 5
hdaps: initial mode latch is 0x05
hdaps: setting ec_rate=250, filter_order=2
hdaps: device successfully initialized.
input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input9
input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input10
hdaps: driver successfully loaded.
tp_smapi 0.41 loading...
tp_smapi successfully loaded (smapi_port=0xb2).
snd_hda_core: Unknown symbol snd_sgbuf_get_chunk_size (err 0)
snd_hda_core: Unknown symbol snd_pcm_format_width (err 0)
raid6: sse2x1 gen() 6952 MB/s
raid6: sse2x1 xor() 5566 MB/s
raid6: sse2x2 gen() 8302 MB/s
raid6: sse2x2 xor() 6515 MB/s
raid6: sse2x4 gen() 9560 MB/s
raid6: sse2x4 xor() 6972 MB/s
raid6: using algorithm sse2x4 gen() 9560 MB/s
raid6: .... xor() 6972 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 12189.000 MB/sec
generic_sse: 10644.000 MB/sec
xor: using function: prefetch64-sse (12189.000 MB/sec)
Btrfs loaded
random: nonblocking pool is initialized
intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
PM: Marking nosave pages: [mem 0xbb27c000-0xbb281fff]
PM: Marking nosave pages: [mem 0xbb35f000-0xbb40efff]
PM: Marking nosave pages: [mem 0xbb46f000-0xbb70efff]
PM: Marking nosave pages: [mem 0xbb717000-0xbb71efff]
PM: Marking nosave pages: [mem 0xbb76b000-0xbb7fefff]
PM: Marking nosave pages: [mem 0xbb800000-0xffffffff]
PM: Marking nosave pages: [mem 0x1fc000000-0x1ffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (360) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (369) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (373) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 10435580k swap on /dev/sda7. Priority:-1 extents:1 across:10435580k SSFS
systemd-udevd[555]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011C0-0x00000000000011CF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB_.PCI0.LPC_.LPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cdc_acm 3-1.1:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
audit: type=1400 audit(1455576460.917:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=710 comm="apparmor_parser"
audit: type=1400 audit(1455576460.917:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710 comm="apparmor_parser"
audit: type=1400 audit(1455576460.917:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=710 comm="apparmor_parser"
audit: type=1400 audit(1455576460.917:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710 comm="apparmor_parser"
audit: type=1400 audit(1455576460.917:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=710 comm="apparmor_parser"
audit: type=1400 audit(1455576460.917:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=710 comm="apparmor_parser"
input: Plantronics Voyager Legend as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:047F:0115.0001/input/input11
plantronics 0003:047F:0115.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Plantronics Voyager Legend] on usb-0000:00:1a.0-1.2/input0
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 6QET70WW (1.40 ), EC 6SHT34WW-1.15
thinkpad_acpi: Lenovo ThinkPad X201 Tablet, model 3093BU3
audit: type=1400 audit(1455576460.933:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=720 comm="apparmor_parser"
thinkpad_acpi: detected a 16-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
usbcore: registered new interface driver btusb
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
device-mapper: multipath: version 1.9.0 loaded
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
serio: Serial port ttyS4
snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
input: Wacom Serial Penabled 2FG Touchscreen as /devices/pnp0/00:05/tty/ttyS4/serio3/input/input13
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
init: Failed to spawn ofono main process: unable to execute: No such file or directory
ubuntu-location[1037]: segfault at 0 ip (null) sp 00007ffe62277098 error 14 in ubuntu-location-serviced[400000+29000]
init: ubuntu-location-service main process (1037) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
ubuntu-location[1075]: segfault at 0 ip (null) sp 00007ffc59b6f6d8 error 14 in ubuntu-location-serviced[400000+29000]
init: ubuntu-location-service main process (1075) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ubuntu-location[1090]: segfault at 0 ip (null) sp 00007ffca6661f18 error 14 in ubuntu-location-serviced[400000+29000]
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: samba-ad-dc main process (1026) terminated with status 1
init: ubuntu-location-service main process (1090) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1100) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1103) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1108) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1111) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1113) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: failsafe main process (986) killed by TERM signal
init: ubuntu-location-service main process (1130) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1178) killed by SEGV signal
init: ubuntu-location-service main process ended, respawning
init: ubuntu-location-service main process (1193) killed by SEGV signal
init: ubuntu-location-service respawning too fast, stopped
init: cups main process (1166) killed by HUP signal
init: cups main process ended, respawning
ttyS5: LSR safety check engaged!
ttyS5: LSR safety check engaged!
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
ip_tables: (C) 2000-2006 Netfilter Core Team
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
device-mapper: ioctl: Unable to rename non-existent device, cryptswap1_unformatted to cryptswap1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2050) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 4-1.4: USB disconnect, device number 5
qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
qcserial 4-1.4:1.1: device disconnected
usb 4-1.4: new high-speed USB device number 6 using ehci-pci
usb 4-1.4: New USB device found, idVendor=05c6, idProduct=9205
usb 4-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 4-1.4: Product: Qualcomm Gobi 2000
usb 4-1.4: Manufacturer: Qualcomm Incorporated
qcserial 4-1.4:1.1: Qualcomm USB modem converter detected
usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
qcserial 4-1.4:1.2: Qualcomm USB modem converter detected
usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB1
qcserial 4-1.4:1.3: Qualcomm USB modem converter detected
usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB2
usbcore: registered new interface driver cdc_wdm
qmi_wwan 4-1.4:1.0: cdc-wdm1: USB WDM device
qmi_wwan 4-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, 8e:86:41:c3:d7:8f
usbcore: registered new interface driver qmi_wwan
wlan0: authenticate with 00:1c:4a:d3:db:a2
wlan0: send auth to 00:1c:4a:d3:db:a2 (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from 00:1c:4a:d3:db:a2
wlan0: associate with 00:1c:4a:d3:db:a2 (try 1/3)
wlan0: RX AssocResp from 00:1c:4a:d3:db:a2 (capab=0x411 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 00:1c:4a:d3:db:a2 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with 00:1c:4a:d3:db:a2
wlan0: send auth to 00:1c:4a:d3:db:a2 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1c:4a:d3:db:a2 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: RX AssocResp from 00:1c:4a:d3:db:a2 (capab=0x411 status=0 aid=4)
wlan0: associated
audit_printk_skb: 245 callbacks suppressed
audit: type=1400 audit(1455576490.645:88): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/home/.ecryptfs/schiller/.Private/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBU2xcdfP5qDjLTLFYzrrmT3k--/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBU6l9EQvUXlbC4mCdfKiUNB---/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUmzlYOIgi-mlFEYq3DIRDPU--/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUJMHk8GiTYUJvrsQFKMXH.E--/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUtCvPVhWGRx2mAYnATy9XEE--" pid=3706 comm="mission-control" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
audit: type=1400 audit(1455576490.645:89): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/home/.ecryptfs/schiller/.Private/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBU2xcdfP5qDjLTLFYzrrmT3k--/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBU6l9EQvUXlbC4mCdfKiUNB---/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUmzlYOIgi-mlFEYq3DIRDPU--/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUJMHk8GiTYUJvrsQFKMXH.E--/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUtCvPVhWGRx2mAYnATy9XEE--" pid=3706 comm="mission-control" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
audit: type=1400 audit(1455576490.669:90): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/home/.ecryptfs/schiller/.Private/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUHuPRozoOAvz06bda.Dy96---/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUD.cV4jiknvMxxpT5-6aXOk--" pid=3706 comm="mission-control" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
audit: type=1400 audit(1455576490.673:91): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/home/home/.ecryptfs/schiller/.Private/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUHuPRozoOAvz06bda.Dy96---/ECRYPTFS_FNEK_ENCRYPTED.FWZfjTuaKzuk.EQZNaV.0U2F9OzTyC85xWBUD.cV4jiknvMxxpT5-6aXOk--" pid=3706 comm="mission-control" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
ISO 9660 Extensions: Microsoft Joliet Level 3
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ISO 9660 Extensions: RRIP_1991A
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1455576492.389:92): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3875 comm="apparmor_parser"
audit: type=1400 audit(1455576492.389:93): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3875 comm="apparmor_parser"
audit: type=1400 audit(1455576492.389:94): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3875 comm="apparmor_parser"
audit: type=1400 audit(1455576492.397:95): apparmor="ALLOWED" operation="open" profile="/usr/sbin/cupsd" name="/home/cache/cups/Roger-Router-Fax.data" pid=3876 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1455576492.401:96): apparmor="ALLOWED" operation="open" profile="/usr/sbin/cupsd" name="/home/cache/cups/Sharp-MX-2300N.data" pid=3876 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1455576492.401:97): apparmor="ALLOWED" operation="open" profile="/usr/sbin/cupsd" name="/home/cache/cups/Sharp-MX-2300N.data" pid=3876 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Netfilter messages via NETLINK v0.30.
CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Core temperature/speed normal
CPU2: Core temperature/speed normal
show_signal_msg: 6 callbacks suppressed
tracker-miner-f[3454]: segfault at 1 ip 00007fb53058185c sp 00007fffe00ad960 error 4 in libgio-2.0.so.0.4002.0[7fb53053d000+16c000]
Core dump to |/usr/share/apport/apport 3454 11 0 3454 pipe failed
acpi_call: Cannot get handle: Error: AE_NOT_FOUND
acpi_call: Cannot get handle: Error: AE_NOT_FOUND
mce: [Hardware Error]: Machine check events logged