dmesg - braber1

Return To braber1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-77-generic (buildd@lcy01-30) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #121-Ubuntu SMP Wed Jan 20 10:50:42 UTC 2016 (Ubuntu 3.13.0-77.121-generic 3.13.11-ckt32)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000008e3d9fff] usable
BIOS-e820: [mem 0x000000008e3da000-0x000000008e409fff] reserved
BIOS-e820: [mem 0x000000008e40a000-0x000000008e43dfff] usable
BIOS-e820: [mem 0x000000008e43e000-0x000000008e4fafff] ACPI NVS
BIOS-e820: [mem 0x000000008e4fb000-0x000000008e9f7fff] reserved
BIOS-e820: [mem 0x000000008e9f8000-0x000000008ea34fff] type 20
BIOS-e820: [mem 0x000000008ea35000-0x000000008ea35fff] usable
BIOS-e820: [mem 0x000000008ea36000-0x000000008ec3bfff] ACPI NVS
BIOS-e820: [mem 0x000000008ec3c000-0x000000008f081fff] usable
BIOS-e820: [mem 0x000000008f082000-0x000000008f7f2fff] reserved
BIOS-e820: [mem 0x000000008f7f3000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0x8e4c2000  ACPI 2.0=0x8e4c2000  SMBIOS=0xf04d0  MPS=0xfd570 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002504000) (21MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000002504000-0x0000000035b44000) (822MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000035b44000-0x0000000036d9a000) (18MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000036d9a000-0x000000005d7d1000) (618MB)
efi: mem09: type=2, attr=0xf, range=[0x000000005d7d1000-0x000000007db2a000) (515MB)
efi: mem10: type=7, attr=0xf, range=[0x000000007db2a000-0x000000007db30000) (0MB)
efi: mem11: type=2, attr=0xf, range=[0x000000007db30000-0x000000007dd06000) (1MB)
efi: mem12: type=1, attr=0xf, range=[0x000000007dd06000-0x000000007de2c000) (1MB)
efi: mem13: type=7, attr=0xf, range=[0x000000007de2c000-0x0000000080644000) (40MB)
efi: mem14: type=4, attr=0xf, range=[0x0000000080644000-0x0000000080e88000) (8MB)
efi: mem15: type=7, attr=0xf, range=[0x0000000080e88000-0x0000000080eef000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x0000000080eef000-0x0000000080f04000) (0MB)
efi: mem17: type=7, attr=0xf, range=[0x0000000080f04000-0x0000000081003000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x0000000081003000-0x0000000081004000) (0MB)
efi: mem19: type=7, attr=0xf, range=[0x0000000081004000-0x0000000081009000) (0MB)
efi: mem20: type=4, attr=0xf, range=[0x0000000081009000-0x000000008100a000) (0MB)
efi: mem21: type=7, attr=0xf, range=[0x000000008100a000-0x000000008106a000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x000000008106a000-0x000000008107f000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x000000008107f000-0x000000008117e000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x000000008117e000-0x000000008117f000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x000000008117f000-0x0000000081185000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x0000000081185000-0x0000000081186000) (0MB)
efi: mem27: type=7, attr=0xf, range=[0x0000000081186000-0x00000000811e4000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000811e4000-0x00000000811f9000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000811f9000-0x00000000812f7000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000812f7000-0x00000000812f8000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000812f8000-0x0000000081301000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x0000000081301000-0x0000000081302000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x0000000081302000-0x0000000081363000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x0000000081363000-0x0000000081378000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x0000000081378000-0x0000000081480000) (1MB)
efi: mem36: type=4, attr=0xf, range=[0x0000000081480000-0x0000000081481000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x0000000081481000-0x00000000814e7000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000814e7000-0x00000000814fc000) (0MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000814fc000-0x00000000815f4000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000815f4000-0x00000000815f8000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000815f8000-0x00000000815fa000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000815fa000-0x00000000815fb000) (0MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000815fb000-0x0000000081606000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x0000000081606000-0x0000000081607000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x0000000081607000-0x000000008161e000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x000000008161e000-0x000000008161f000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x000000008161f000-0x0000000081625000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x0000000081625000-0x0000000081682000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x0000000081682000-0x0000000081693000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x0000000081693000-0x0000000081788000) (0MB)
efi: mem51: type=7, attr=0xf, range=[0x0000000081788000-0x0000000081789000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x0000000081789000-0x000000008179e000) (0MB)
efi: mem53: type=7, attr=0xf, range=[0x000000008179e000-0x00000000817a2000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x00000000817a2000-0x00000000817ba000) (0MB)
efi: mem55: type=7, attr=0xf, range=[0x00000000817ba000-0x00000000817c4000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x00000000817c4000-0x00000000817d9000) (0MB)
efi: mem57: type=7, attr=0xf, range=[0x00000000817d9000-0x00000000817de000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x00000000817de000-0x000000008181a000) (0MB)
efi: mem59: type=7, attr=0xf, range=[0x000000008181a000-0x0000000081824000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x0000000081824000-0x000000008183e000) (0MB)
efi: mem61: type=7, attr=0xf, range=[0x000000008183e000-0x0000000081848000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x0000000081848000-0x0000000081859000) (0MB)
efi: mem63: type=7, attr=0xf, range=[0x0000000081859000-0x000000008185d000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x000000008185d000-0x0000000081876000) (0MB)
efi: mem65: type=7, attr=0xf, range=[0x0000000081876000-0x000000008187b000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x000000008187b000-0x00000000818b6000) (0MB)
efi: mem67: type=7, attr=0xf, range=[0x00000000818b6000-0x00000000818bc000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x00000000818bc000-0x000000008191b000) (0MB)
efi: mem69: type=7, attr=0xf, range=[0x000000008191b000-0x000000008191f000) (0MB)
efi: mem70: type=4, attr=0xf, range=[0x000000008191f000-0x0000000081937000) (0MB)
efi: mem71: type=7, attr=0xf, range=[0x0000000081937000-0x0000000081941000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x0000000081941000-0x0000000081955000) (0MB)
efi: mem73: type=7, attr=0xf, range=[0x0000000081955000-0x000000008195a000) (0MB)
efi: mem74: type=4, attr=0xf, range=[0x000000008195a000-0x0000000081995000) (0MB)
efi: mem75: type=7, attr=0xf, range=[0x0000000081995000-0x000000008199f000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x000000008199f000-0x00000000819b8000) (0MB)
efi: mem77: type=7, attr=0xf, range=[0x00000000819b8000-0x00000000819c2000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000819c2000-0x00000000819d5000) (0MB)
efi: mem79: type=7, attr=0xf, range=[0x00000000819d5000-0x00000000819d9000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x00000000819d9000-0x00000000819ef000) (0MB)
efi: mem81: type=7, attr=0xf, range=[0x00000000819ef000-0x00000000819f4000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000819f4000-0x0000000081a5d000) (0MB)
efi: mem83: type=7, attr=0xf, range=[0x0000000081a5d000-0x0000000081a7a000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x0000000081a7a000-0x0000000081a95000) (0MB)
efi: mem85: type=7, attr=0xf, range=[0x0000000081a95000-0x0000000081a99000) (0MB)
efi: mem86: type=4, attr=0xf, range=[0x0000000081a99000-0x0000000081ab3000) (0MB)
efi: mem87: type=7, attr=0xf, range=[0x0000000081ab3000-0x0000000081abd000) (0MB)
efi: mem88: type=4, attr=0xf, range=[0x0000000081abd000-0x0000000081ad1000) (0MB)
efi: mem89: type=7, attr=0xf, range=[0x0000000081ad1000-0x0000000081ad6000) (0MB)
efi: mem90: type=4, attr=0xf, range=[0x0000000081ad6000-0x0000000081b11000) (0MB)
efi: mem91: type=7, attr=0xf, range=[0x0000000081b11000-0x0000000081b1b000) (0MB)
efi: mem92: type=4, attr=0xf, range=[0x0000000081b1b000-0x0000000081b35000) (0MB)
efi: mem93: type=7, attr=0xf, range=[0x0000000081b35000-0x0000000081b3f000) (0MB)
efi: mem94: type=4, attr=0xf, range=[0x0000000081b3f000-0x0000000081b52000) (0MB)
efi: mem95: type=7, attr=0xf, range=[0x0000000081b52000-0x0000000081b56000) (0MB)
efi: mem96: type=4, attr=0xf, range=[0x0000000081b56000-0x0000000081b6b000) (0MB)
efi: mem97: type=7, attr=0xf, range=[0x0000000081b6b000-0x0000000081b70000) (0MB)
efi: mem98: type=4, attr=0xf, range=[0x0000000081b70000-0x0000000081bd7000) (0MB)
efi: mem99: type=7, attr=0xf, range=[0x0000000081bd7000-0x0000000081bfa000) (0MB)
efi: mem100: type=4, attr=0xf, range=[0x0000000081bfa000-0x0000000081c10000) (0MB)
efi: mem101: type=7, attr=0xf, range=[0x0000000081c10000-0x0000000081c14000) (0MB)
efi: mem102: type=4, attr=0xf, range=[0x0000000081c14000-0x0000000081c2d000) (0MB)
efi: mem103: type=7, attr=0xf, range=[0x0000000081c2d000-0x0000000081c37000) (0MB)
efi: mem104: type=4, attr=0xf, range=[0x0000000081c37000-0x0000000081c4d000) (0MB)
efi: mem105: type=7, attr=0xf, range=[0x0000000081c4d000-0x0000000081c52000) (0MB)
efi: mem106: type=4, attr=0xf, range=[0x0000000081c52000-0x0000000081ccc000) (0MB)
efi: mem107: type=7, attr=0xf, range=[0x0000000081ccc000-0x0000000081cd0000) (0MB)
efi: mem108: type=4, attr=0xf, range=[0x0000000081cd0000-0x0000000081ce6000) (0MB)
efi: mem109: type=7, attr=0xf, range=[0x0000000081ce6000-0x0000000081ceb000) (0MB)
efi: mem110: type=4, attr=0xf, range=[0x0000000081ceb000-0x0000000081d66000) (0MB)
efi: mem111: type=7, attr=0xf, range=[0x0000000081d66000-0x0000000081d6b000) (0MB)
efi: mem112: type=4, attr=0xf, range=[0x0000000081d6b000-0x0000000081da7000) (0MB)
efi: mem113: type=7, attr=0xf, range=[0x0000000081da7000-0x0000000081da9000) (0MB)
efi: mem114: type=4, attr=0xf, range=[0x0000000081da9000-0x0000000081e7e000) (0MB)
efi: mem115: type=7, attr=0xf, range=[0x0000000081e7e000-0x0000000081e7f000) (0MB)
efi: mem116: type=4, attr=0xf, range=[0x0000000081e7f000-0x0000000081ea8000) (0MB)
efi: mem117: type=7, attr=0xf, range=[0x0000000081ea8000-0x0000000081eab000) (0MB)
efi: mem118: type=4, attr=0xf, range=[0x0000000081eab000-0x0000000081fe5000) (1MB)
efi: mem119: type=7, attr=0xf, range=[0x0000000081fe5000-0x0000000081fe6000) (0MB)
efi: mem120: type=4, attr=0xf, range=[0x0000000081fe6000-0x00000000820e4000) (0MB)
efi: mem121: type=7, attr=0xf, range=[0x00000000820e4000-0x00000000820e7000) (0MB)
efi: mem122: type=4, attr=0xf, range=[0x00000000820e7000-0x0000000082101000) (0MB)
efi: mem123: type=7, attr=0xf, range=[0x0000000082101000-0x0000000082102000) (0MB)
efi: mem124: type=4, attr=0xf, range=[0x0000000082102000-0x0000000082531000) (4MB)
efi: mem125: type=7, attr=0xf, range=[0x0000000082531000-0x000000008282e000) (2MB)
efi: mem126: type=4, attr=0xf, range=[0x000000008282e000-0x000000008db97000) (179MB)
efi: mem127: type=7, attr=0xf, range=[0x000000008db97000-0x000000008dc4e000) (0MB)
efi: mem128: type=3, attr=0xf, range=[0x000000008dc4e000-0x000000008e3da000) (7MB)
efi: mem129: type=0, attr=0xf, range=[0x000000008e3da000-0x000000008e3f0000) (0MB)
efi: mem130: type=0, attr=0xf, range=[0x000000008e3f0000-0x000000008e40a000) (0MB)
efi: mem131: type=7, attr=0xf, range=[0x000000008e40a000-0x000000008e432000) (0MB)
efi: mem132: type=2, attr=0xf, range=[0x000000008e432000-0x000000008e43e000) (0MB)
efi: mem133: type=10, attr=0xf, range=[0x000000008e43e000-0x000000008e4d3000) (0MB)
efi: mem134: type=10, attr=0xf, range=[0x000000008e4d3000-0x000000008e4dc000) (0MB)
efi: mem135: type=10, attr=0xf, range=[0x000000008e4dc000-0x000000008e4fb000) (0MB)
efi: mem136: type=6, attr=0x800000000000000f, range=[0x000000008e4fb000-0x000000008e5f6000) (0MB)
efi: mem137: type=6, attr=0x800000000000000f, range=[0x000000008e5f6000-0x000000008e81f000) (2MB)
efi: mem138: type=6, attr=0x800000000000000f, range=[0x000000008e81f000-0x000000008e821000) (0MB)
efi: mem139: type=6, attr=0x800000000000000f, range=[0x000000008e821000-0x000000008e95b000) (1MB)
efi: mem140: type=6, attr=0x800000000000000f, range=[0x000000008e95b000-0x000000008e95d000) (0MB)
efi: mem141: type=6, attr=0x800000000000000f, range=[0x000000008e95d000-0x000000008e9f8000) (0MB)
efi: mem142: type=5, attr=0x800000000000000f, range=[0x000000008e9f8000-0x000000008ea04000) (0MB)
efi: mem143: type=5, attr=0x800000000000000f, range=[0x000000008ea04000-0x000000008ea35000) (0MB)
efi: mem144: type=4, attr=0xf, range=[0x000000008ea35000-0x000000008ea36000) (0MB)
efi: mem145: type=10, attr=0xf, range=[0x000000008ea36000-0x000000008ec3c000) (2MB)
efi: mem146: type=4, attr=0xf, range=[0x000000008ec3c000-0x000000008ed94000) (1MB)
efi: mem147: type=3, attr=0xf, range=[0x000000008ed94000-0x000000008f044000) (2MB)
efi: mem148: type=4, attr=0xf, range=[0x000000008f044000-0x000000008f046000) (0MB)
efi: mem149: type=3, attr=0xf, range=[0x000000008f046000-0x000000008f04a000) (0MB)
efi: mem150: type=4, attr=0xf, range=[0x000000008f04a000-0x000000008f062000) (0MB)
efi: mem151: type=3, attr=0xf, range=[0x000000008f062000-0x000000008f074000) (0MB)
efi: mem152: type=4, attr=0xf, range=[0x000000008f074000-0x000000008f075000) (0MB)
efi: mem153: type=3, attr=0xf, range=[0x000000008f075000-0x000000008f077000) (0MB)
efi: mem154: type=4, attr=0xf, range=[0x000000008f077000-0x000000008f082000) (0MB)
efi: mem155: type=6, attr=0x800000000000000f, range=[0x000000008f082000-0x000000008f7f3000) (7MB)
efi: mem156: type=4, attr=0xf, range=[0x000000008f7f3000-0x000000008f800000) (0MB)
efi: mem157: type=7, attr=0xf, range=[0x0000000100000000-0x000000043f000000) (13296MB)
efi: mem158: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
efi: mem159: type=11, attr=0x8000000000000001, range=[0x00000000feb80000-0x00000000fec00000) (0MB)
efi: mem160: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem161: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem162: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem163: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
efi: mem164: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem165: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
efi: mem166: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: MSI MS-7721/A68HM-E33 V2 (MS-7721), BIOS V8.1 04/15/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFF0000000 write-back
  2 base 00008F800000 mask FFFFFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000043f000000 aka 17392M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2296MB, range: 8MB, type UC
total RAM covered: 2296M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2296MB, range: 8MB, type UC
e820: update [mem 0x8f800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x43ee00000-0x43effffff]
 [mem 0x43ee00000-0x43effffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43edfffff]
 [mem 0x43c000000-0x43edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
 [mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x8e3d9fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x8e1fffff] page 2M
 [mem 0x8e200000-0x8e3d9fff] page 4k
init_memory_mapping: [mem 0x8e40a000-0x8e43dfff]
 [mem 0x8e40a000-0x8e43dfff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x8ea35000-0x8ea35fff]
 [mem 0x8ea35000-0x8ea35fff] page 4k
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x8ec3c000-0x8f081fff]
 [mem 0x8ec3c000-0x8edfffff] page 4k
 [mem 0x8ee00000-0x8effffff] page 2M
 [mem 0x8f000000-0x8f081fff] page 4k
init_memory_mapping: [mem 0x8f7f3000-0x8f7fffff]
 [mem 0x8f7f3000-0x8f7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35b44000-0x36d99fff]
ACPI: RSDP 000000008e4c2000 000024 (v02 ALASKA)
ACPI: XSDT 000000008e4c2088 000094 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 000000008e4c87d0 00010C (v05 ALASKA    A M I 01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 000000008e4c21b8 006615 (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 000000008e4f1d80 000040
ACPI: APIC 000000008e4c88e0 000072 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 000000008e4c8958 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FIDT 000000008e4c89a0 00009C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 000000008e4c8a40 00003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
ACPI: HPET 000000008e4c8a80 000038 (v01 ALASKA    A M I 01072009 AMI  00000005)
ACPI: UEFI 000000008e4c8ab8 000042 (v01 ALASKA    A M I 01072009      00000000)
ACPI: IVRS 000000008e4c8b00 000068 (v02    AMD BANTRY   00000001 AMD  00000000)
ACPI: SSDT 000000008e4c8b68 000B9C (v01    AMD BANTRY   00000001 AMD  00000001)
ACPI: SSDT 000000008e4c9708 0004B7 (v02    AMD BANTRY   00000001 MSFT 04000000)
ACPI: CRAT 000000008e4c9bc0 000578 (v01    AMD BANTRY   00000001 AMD  00000001)
ACPI: SSDT 000000008e4ca138 0016E2 (v01    AMD   CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 000000008e4cb820 001519 (v01    AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: BGRT 000000008e4ccd40 000038 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
Initmem setup node 0 [mem 0x00000000-0x43effffff]
  NODE_DATA [mem 0x43eff6000-0x43effafff]
 [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f200000-ffff88043e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009ffff]
  node   0: [mem 0x00100000-0x8e3d9fff]
  node   0: [mem 0x8e40a000-0x8e43dfff]
  node   0: [mem 0x8ea35000-0x8ea35fff]
  node   0: [mem 0x8ec3c000-0x8f081fff]
  node   0: [mem 0x8f7f3000-0x8f7fffff]
  node   0: [mem 0x100000000-0x43effffff]
On node 0 totalpages: 3987457
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 9058 pages used for memmap
  DMA32 zone: 579682 pages, LIFO batch:31
  Normal zone: 53184 pages used for memmap
  Normal zone: 3403776 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8e3da000-0x8e409fff]
PM: Registered nosave memory: [mem 0x8e43e000-0x8e4fafff]
PM: Registered nosave memory: [mem 0x8e4fb000-0x8e9f7fff]
PM: Registered nosave memory: [mem 0x8e9f8000-0x8ea34fff]
PM: Registered nosave memory: [mem 0x8ea36000-0x8ec3bfff]
PM: Registered nosave memory: [mem 0x8f082000-0x8f7f2fff]
PM: Registered nosave memory: [mem 0x8f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x8f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s81536 r8192 d20864 u524288
pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3925124
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 78000000
PM: Registered nosave memory: [mem 0x78000000-0x7bffffff]
Memory: 15313364K/15949828K available (7400K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 636464K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 63963136 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3892.475 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7784.95 BogoMIPS (lpj=15569900)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 008f800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28601 entries in 112 pages
[Firmware Bug]: AMD-Vi: IOAPIC[0] not in IVRS table
[Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
AMD-Vi: Disabling interrupt remapping
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-6600K APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (31139.80 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x8e43e000-0x8e4fafff] (774144 bytes)
PM: Registering ACPI NVS region [mem 0x8ea36000-0x8ec3bfff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  3:54:39, date: 02/06/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:990e] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb4f000-0xfeb4f7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xfed3ffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x8e3da000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8e43e000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ea36000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f082000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x90000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0295-0x0296] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: [io  0x04d0-0x04d1] has been reserved
system 00:0b: [io  0x040b] has been reserved
system 00:0b: [io  0x04d6] has been reserved
system 00:0b: [io  0x0c00-0x0c01] has been reserved
system 00:0b: [io  0x0c14] has been reserved
system 00:0b: [io  0x0c50-0x0c51] has been reserved
system 00:0b: [io  0x0c52] has been reserved
system 00:0b: [io  0x0c6c] has been reserved
system 00:0b: [io  0x0c6f] has been reserved
system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
system 00:0b: [io  0x0800-0x089f] could not be reserved
system 00:0b: [io  0x0b20-0x0b3f] has been reserved
system 00:0b: [io  0x0900-0x090f] has been reserved
system 00:0b: [io  0x0910-0x091f] has been reserved
system 00:0b: [io  0xfe00-0xfefe] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0b: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xfed3ffff]
pci_bus 0000:02: resource 11 [mem 0xfed45000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18776K (ffff880035b44000 - ffff880036d9a000)
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi:  Extended features:  PreF PPR GT IA
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7c644000-0x80644000] (64MB) mapped at [ffff88007c644000-ffff880080643fff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1454730879.496:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 30373
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c80000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-77-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-77-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d961bd20e8ac66643fc6dc2d56668f426e33e88f'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 4:630:916
tty ptmx: hash matches
rtc_cmos 00:07: setting system clock to 2016-02-06 03:54:40 UTC (1454730880)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 780K (ffff88000173d000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 46 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f180 irq 46
ata3: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f200 irq 46
ata4: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f280 irq 46
ata5: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f300 irq 46
ata6: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f380 irq 46
r8169 0000:01:00.0: irq 47 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc900018aa000, d8:cb:8a:7a:00:07, XID 0c000800 IRQ 47
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 6-1: new full-speed USB device number 2 using xhci_hcd
usb 6-1: New USB device found, idVendor=046d, idProduct=c52b
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Receiver
usb 6-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-1/input2
input: Logitech Unifying Device. Wireless PID:4031 as /devices/pci0000:00/0000:00:10.0/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/input/input5
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4031] on usb-0000:00:10.0-1:1
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:10.0/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/input/input6
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:10.0-1:2
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: TOSHIBA THNSNH128GBST, HTRAN101, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
ata2.00: ATA-8: WDC WD10EZEX-00KUWA0, 15.01H15, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA THNSNH12 HTRA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00K 15.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/133
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NS95  RN01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 3892.723 MHz
random: init urandom read with 65 bits of entropy available
init: plymouth-upstart-bridge main process (186) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (195) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (199) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 7551996k swap on /dev/sda3.  Priority:-1 extents:1 across:7551996k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[316]: starting version 204
lp: driver loaded but no devices found
random: nonblocking pool is initialized
wmi: Mapper loaded
ppdev: user-space parallel port driver
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:03: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD IOMMUv2 driver by Joerg Roedel 
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 14830 MBytes.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[fglrx]   vendor: 1002 device: 990e revision: 0 count: 1
[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
systemd-udevd[338]: renamed network interface eth0 to eth1
hda-intel 0000:00:01.1: Using LPIB position fix
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
hda-intel 0000:00:01.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
hda-intel 0000:00:14.2: Using LPIB position fix
type=1400 audit(1454730881.653:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=399 comm="apparmor_parser"
type=1400 audit(1454730881.653:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
type=1400 audit(1454730881.653:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1454730881.653:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
type=1400 audit(1454730881.653:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1454730881.653:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4025c603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4025c603 for NID 0x1d
realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
init: failsafe main process (605) killed by TERM signal
init: samba-ad-dc main process (647) terminated with status 1
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:01:00.0 eth1: link down
r8169 0000:01:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Switched to clocksource tsc
type=1400 audit(1454730882.282:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=838 comm="apparmor_parser"
type=1400 audit(1454730882.282:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=838 comm="apparmor_parser"
type=1400 audit(1454730882.282:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=838 comm="apparmor_parser"
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
fglrx_pci 0000:00:01.0: irq 49 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1277
[fglrx] Firegl kernel thread PID: 1278
[fglrx] Firegl kernel thread PID: 1279
[fglrx] IRQ 49 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000 
[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000 
[fglrx] Reserved FB block: Unshared offset:2ffed000, size:13000 
[fglrx] ATIF platform detected with notification ID: 0x81
r8169 0000:01:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1302) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
UDF-fs: INFO Mounting volume 'BABY_WORLD_ANIMALS', timestamp 2004/10/13 10:50 (1e98)
udevadm: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case.  If you have one, please send an email to linux-mm@kvack.org.
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 16
Broke affinity for irq 41
Broke affinity for irq 46
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
LVT offset 0 assigned for vector 0x400
kvm: enabling virtualization on CPU1
smpboot: Booting Node 0 Processor 2 APIC 0x12
kvm: enabling virtualization on CPU2
smpboot: Booting Node 0 Processor 3 APIC 0x13
kvm: enabling virtualization on CPU3
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Stopping disk
serial 00:04: disabled
[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[fglrx:firegl_pplib_notify_event] *ERROR*        ulEventType = 00000002, ulEventData = 00000000
[fglrx] IRQ 49 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 410.282 msecs
PM: late suspend of devices complete after 0.171 msecs
pcieport 0000:00:04.0: System wakeup enabled by ACPI
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 61.822 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Using NULL legacy PIC
LVT offset 0 assigned for vector 0x400
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000)
[Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000)
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
kvm: enabling virtualization on CPU1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 2601119379 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x12
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x13
kvm: enabling virtualization on CPU3
CPU3 is up
Switched to clocksource hpet
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 93.080 msecs
PM: early resume of devices complete after 0.125 msecs
pcieport 0000:00:04.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
serial 00:04: activated
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 49 Enabled
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
r8169 0000:01:00.0 eth1: link up
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: configured for UDMA/133
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Starting disk
PM: resume of devices complete after 5762.125 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
VFS: busy inodes on changed media or resized disk sr0
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1454765944.770:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=14451 comm="apparmor_parser"
type=1400 audit(1454765944.770:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=14451 comm="apparmor_parser"
type=1400 audit(1454765944.774:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=14451 comm="apparmor_parser"

Return To braber1 System Information