dmesg - post_stockton_mem
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.23.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Mon Jun 18 18:58:52 BST 2012
Command line: initrd=initrd0.img root=live:CDLABEL=SLI21_A00_1 rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 00000000cd2f0000 (usable)
BIOS-e820: 00000000cd2f0000 - 00000000cd31c000 (reserved)
BIOS-e820: 00000000cd31c000 - 00000000cd35b000 (ACPI data)
BIOS-e820: 00000000cd35b000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xFCFB0
DMI: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-D3FFF write-back
D4000-D7FFF write-protect
D8000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFF80000000 write-back
1 base 000080000000 mask 3FFFC0000000 write-back
2 base 0000C0000000 mask 3FFFF0000000 write-back
3 base 000100000000 mask 3FFFE0000000 write-back
4 base 000120000000 mask 3FFFF0000000 write-back
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcd2f0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cd2f0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cd200000 page 2M
00cd200000 - 00cd2f0000 page 4k
kernel direct mapping tables up to cd2f0000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ a000-c000
RAMDISK: 7ed13000 - 7fffeaf8
ACPI: RSDP 00000000000f0c70 00024 (v02 DELL )
ACPI: XSDT 00000000000f0db8 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cd33534c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cd31c000 08029 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 00000000cd337000 00040
ACPI: APIC 00000000cd334478 001DE (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cd334664 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cd3346b8 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000cd3346f4 000F0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cd334a10 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cd334a50 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cd334b88 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cd3241ec 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cd32445c 0055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cd32402c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cd32405c 00190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cd3352e4 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: PC__ 00000000cd335274 0006E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cd334db0 004C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cd338000 00ED0 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 0
SRAT: PXM 1 -> APIC 4 -> Node 0
SRAT: PXM 1 -> APIC 6 -> Node 0
SRAT: Node 0 PXM 1 0-130000000
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000000000b000 - 000000000003efff]
bootmap [000000000003f000 - 0000000000064fff] pages 26
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c864] TEXT DATA BSS ==> [0001000000 - 000200c864]
#3 [007ed13000 - 007fffeaf8] RAMDISK ==> [007ed13000 - 007fffeaf8]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [000200d000 - 000200d72d] BRK ==> [000200d000 - 000200d72d]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000cd2f0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1036939
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3834 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 822056 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x44] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x45] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x46] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x47] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x48] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x49] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x4a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x4b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x4c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x4d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x4e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x4f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x50] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x51] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x52] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x53] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x54] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x55] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x56] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x57] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x58] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x59] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x5a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x5b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x5c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x5d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x5e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x5f] disabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x60] disabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x61] disabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x62] disabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x63] disabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x64] disabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x65] disabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x66] disabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x67] disabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x68] disabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x69] disabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x6a] disabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x6b] disabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x6c] disabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x6d] disabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x6e] disabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x6f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 48 CPUs, 44 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 000000000009c000 - 0000000000100000
PM: Registered nosave memory: 00000000cd2f0000 - 00000000cd31c000
PM: Registered nosave memory: 00000000cd31c000 - 00000000cd35b000
PM: Registered nosave memory: 00000000cd35b000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88002c000000 s92632 r8192 d22056 u131072
pcpu-alloc: s92632 r8192 d22056 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1019810
Policy zone: Normal
Kernel command line: initrd=initrd0.img root=live:CDLABEL=SLI21_A00_1 rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3980232k/4980736k available (5086k kernel code, 832980k absent, 167524k reserved, 7227k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1336
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1799.986 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.97 BogoMIPS (lpj=1799986)
pid_max: default: 49152 minimum: 384
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20793 entries in 82 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000dc500000 flags: 0x1
IOMMU dc500000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000cf458000 end: 0x000000cf46ffff
DMAR: RMRR base: 0x000000cf450000 end: 0x000000cf450fff
DMAR: RMRR base: 0x000000cf452000 end: 0x000000cf452fff
DMAR: ATSR flags: 0x0
IOAPIC id 0 under DRHD base 0xdc500000
IOAPIC id 1 under DRHD base 0xdc500000
HPET id 0 under DRHD base 0xdc500000
------------[ cut here ]------------
WARNING: at drivers/pci/intr_remapping.c:715 enable_intr_remapping+0x73/0x2af() (Not tainted)
Hardware name: PowerEdge R620
Your BIOS has requested that x2apic be disabled.
This will leave your machine vulnerable to irq-injection attacks.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-220.23.1.el6.x86_64 #1
Call Trace:
[] ? warn_slowpath_common+0x87/0xc0
[] ? warn_slowpath_fmt+0x46/0x50
[] ? enable_intr_remapping+0x73/0x2af
[] ? enable_IR+0x54/0x6e
[] ? enable_IR_x2apic+0xc0/0x221
[] ? native_smp_prepare_cpus+0x143/0x389
[] ? kernel_init+0x112/0x2fe
[] ? child_rip+0xa/0x20
[] ? kernel_init+0x0/0x2fe
[] ? child_rip+0x0/0x20
---[ end trace a7919e7f17c0a725 ]---
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Setting APIC routing to physical flat
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2603 0 @ 1.80GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (14398.37 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xdc4fb000-0xdc4fb00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10 64bit mmio: [0xdc4fc000-0xdc4fc00f]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xdc4fd000-0xdc4fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xdc4fe000-0xdc4fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xece8-0xecef]
pci 0000:00:1f.2: reg 14 io port: [0xecf8-0xecfb]
pci 0000:00:1f.2: reg 18 io port: [0xecf0-0xecf7]
pci 0000:00:1f.2: reg 1c io port: [0xecfc-0xecff]
pci 0000:00:1f.2: reg 20 io port: [0xecc0-0xecdf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xdc4ff000-0xdc4ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd50a0000-0xd50affff]
pci 0000:02:00.0: reg 18 64bit mmio pref: [0xd50b0000-0xd50bffff]
pci 0000:02:00.0: reg 20 64bit mmio pref: [0xd50c0000-0xd50cffff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd8000000-0xd803ffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio pref: [0xd50d0000-0xd50dffff]
pci 0000:02:00.1: reg 18 64bit mmio pref: [0xd50e0000-0xd50effff]
pci 0000:02:00.1: reg 20 64bit mmio pref: [0xd50f0000-0xd50fffff]
pci 0000:02:00.1: reg 30 32bit mmio pref: [0xd8000000-0xd803ffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:01.0: bridge 32bit mmio: [0xd8000000-0xd87fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd5000000-0xd50fffff]
pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd51a0000-0xd51affff]
pci 0000:01:00.0: reg 18 64bit mmio pref: [0xd51b0000-0xd51bffff]
pci 0000:01:00.0: reg 20 64bit mmio pref: [0xd51c0000-0xd51cffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd8800000-0xd883ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10 64bit mmio pref: [0xd51d0000-0xd51dffff]
pci 0000:01:00.1: reg 18 64bit mmio pref: [0xd51e0000-0xd51effff]
pci 0000:01:00.1: reg 20 64bit mmio pref: [0xd51f0000-0xd51fffff]
pci 0000:01:00.1: reg 30 32bit mmio pref: [0xd8800000-0xd883ffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.1: bridge 32bit mmio: [0xd8800000-0xd8ffffff]
pci 0000:00:01.1: bridge 64bit mmio pref: [0xd5100000-0xd51fffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xdbdfc000-0xdbdfffff]
pci 0000:04:00.0: reg 14 32bit mmio: [0xdb800000-0xdb9fffff]
pci 0000:04:00.0: reg 18 32bit mmio: [0xdba00000-0xdbbfffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:02.0: bridge 32bit mmio: [0xdb800000-0xdbdfffff]
pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xd9ffc000-0xd9ffffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xd9f80000-0xd9fbffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xd9000000-0xd901ffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:02.2: bridge io port: [0xf000-0xffff]
pci 0000:00:02.2: bridge 32bit mmio: [0xd9000000-0xd9ffffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xdc3fc000-0xdc3fffff]
pci 0000:05:00.0: reg 14 32bit mmio: [0xdbe00000-0xdbffffff]
pci 0000:05:00.0: reg 18 32bit mmio: [0xdc000000-0xdc1fffff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xdbe00000-0xdc3fffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.7: bridge 32bit mmio: [0xda000000-0xdb7fffff]
pci 0000:00:1c.7: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:01.0: PME# supported from D0 D3hot D3cold
pci 0000:09:01.0: PME# disabled
pci 0000:08:00.0: bridge 32bit mmio: [0xda000000-0xdb7fffff]
pci 0000:08:00.0: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:09:00.0: bridge 32bit mmio: [0xda000000-0xdaffffff]
pci 0000:09:00.0: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:0b:00.0: reg 10 32bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:0b:00.0: reg 14 32bit mmio: [0xdaffc000-0xdaffffff]
pci 0000:0b:00.0: reg 18 32bit mmio: [0xda000000-0xda7fffff]
pci 0000:0a:00.0: bridge 32bit mmio: [0xda000000-0xdaffffff]
pci 0000:0a:00.0: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:09:01.0: bridge 32bit mmio: [0xdb700000-0xdb7fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P0B1] (0000:3f)
pci_bus 0000:3f: on NUMA node 0 (pxm 1)
pci0000:3f: Requesting ACPI _OSC control (0x15)
pci0000:3f: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P1B1] (0000:7f)
pci0000:7f: Requesting ACPI _OSC control (0x15)
pci0000:7f: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff has been reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0x370-0x377 has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:07: ioport range 0xcb0-0xcbf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:09: iomem range 0xe0000000-0xe3efffff has been reserved
system 00:0b: iomem range 0xe3f00000-0xe3ffffff has been reserved
system 00:0c: iomem range 0xdc500000-0xdc501fff has been reserved
pci 0000:01:00.1: BAR 6: address space collision on of device [0xd8800000-0xd883ffff]
pci 0000:02:00.1: BAR 6: address space collision on of device [0xd8000000-0xd803ffff]
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:02
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [0xd8000000-0xd87fffff]
pci 0000:00:01.0: bridge window [0xd5000000-0xd50fffff]
pci 0000:00:01.1: PCI bridge to [bus 01-01]
pci 0000:00:01.1: PCI bridge, secondary bus 0000:01
pci 0000:00:01.1: bridge window [io disabled]
pci 0000:00:01.1: bridge window [0xd8800000-0xd8ffffff]
pci 0000:00:01.1: bridge window [0xd5100000-0xd51fffff]
pci 0000:00:02.0: PCI bridge to [bus 04-04]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:04
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [0xdb800000-0xdbdfffff]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: PCI bridge, secondary bus 0000:03
pci 0000:00:02.2: bridge window [0xf000-0xffff]
pci 0000:00:02.2: bridge window [0xd9000000-0xd9ffffff]
pci 0000:00:02.2: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 05-05]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [0xdbe00000-0xdc3fffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:11.0: PCI bridge to [bus 06-06]
pci 0000:00:11.0: PCI bridge, secondary bus 0000:06
pci 0000:00:11.0: bridge window [io disabled]
pci 0000:00:11.0: bridge window [mem disabled]
pci 0000:00:11.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0: bridge window [io disabled]
pci 0000:0a:00.0: bridge window [0xda000000-0xdaffffff]
pci 0000:0a:00.0: bridge window [0xd4000000-0xd4ffffff]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0: bridge window [io disabled]
pci 0000:09:00.0: bridge window [0xda000000-0xdaffffff]
pci 0000:09:00.0: bridge window [0xd4000000-0xd4ffffff]
pci 0000:09:01.0: PCI bridge to [bus 0c-0c]
pci 0000:09:01.0: PCI bridge, secondary bus 0000:0c
pci 0000:09:01.0: bridge window [io disabled]
pci 0000:09:01.0: bridge window [0xdb700000-0xdb7fffff]
pci 0000:09:01.0: bridge window [mem pref disabled]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
pci 0000:08:00.0: bridge window [io disabled]
pci 0000:08:00.0: bridge window [0xda000000-0xdb7fffff]
pci 0000:08:00.0: bridge window [0xd4000000-0xd4ffffff]
pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [0xda000000-0xdb7fffff]
pci 0000:00:1c.7: bridge window [0xd4000000-0xd4ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 53 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:02.2: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:09:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 mem: [0xd8000000-0xd87fffff]
pci_bus 0000:02: resource 2 pref mem [0xd5000000-0xd50fffff]
pci_bus 0000:01: resource 1 mem: [0xd8800000-0xd8ffffff]
pci_bus 0000:01: resource 2 pref mem [0xd5100000-0xd51fffff]
pci_bus 0000:04: resource 1 mem: [0xdb800000-0xdbdfffff]
pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
pci_bus 0000:03: resource 1 mem: [0xd9000000-0xd9ffffff]
pci_bus 0000:05: resource 1 mem: [0xdbe00000-0xdc3fffff]
pci_bus 0000:08: resource 1 mem: [0xda000000-0xdb7fffff]
pci_bus 0000:08: resource 2 pref mem [0xd4000000-0xd4ffffff]
pci_bus 0000:09: resource 1 mem: [0xda000000-0xdb7fffff]
pci_bus 0000:09: resource 2 pref mem [0xd4000000-0xd4ffffff]
pci_bus 0000:0a: resource 1 mem: [0xda000000-0xdaffffff]
pci_bus 0000:0a: resource 2 pref mem [0xd4000000-0xd4ffffff]
pci_bus 0000:0b: resource 1 mem: [0xda000000-0xdaffffff]
pci_bus 0000:0b: resource 2 pref mem [0xd4000000-0xd4ffffff]
pci_bus 0000:0c: resource 1 mem: [0xdb700000-0xdb7fffff]
pci_bus 0000:0d: resource 3 io: [0x00-0xffff]
pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:3f: resource 0 io: [0x00-0xffff]
pci_bus 0000:3f: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:7f: resource 0 io: [0x00-0xffff]
pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:0b:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19374k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1454524938.767:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7811
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CA2975F3E810BFBE
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 57 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 58 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.1: irq 58 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 59 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 59 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 60 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 60 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 61 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 61 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 62 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 63 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 63 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 64 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.7: irq 64 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
alloc irq_desc for 40 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
serial 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
8 ports detected on Oxford PCI Express device
ttyS2: detected caps 00000700 should be 00000100
0000:04:00.0: ttyS2 at MMIO 0xdbdfd000 (irq = 40) is a 16C950/954
ttyS3: detected caps 00000700 should be 00000100
0000:04:00.0: ttyS3 at MMIO 0xdbdfd200 (irq = 40) is a 16C950/954
Couldn't register serial port 0000:04:00.0: -28
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
serial 0000:05:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
serial 0000:05:00.0: PCI INT A disabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xdc4fd000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdc4fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2016-02-03 18:42:19 UTC (1454524939)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1756k freed
dracut: dracut-004-256.el6_2.1
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: root was live:/dev/disk/by-label/SLI21_A00_1, liveroot is now live:CDLABEL=SLI21_A00_1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
tg3.c:v3.119 (May 18, 2011)
alloc irq_desc for 35 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
tg3 0000:01:00.0: setting latency timer to 64
tg3 0000:01:00.0: eth0: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:26
tg3 0000:01:00.0: eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 38 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.1: PCI INT B -> GSI 38 (level, low) -> IRQ 38
tg3 0000:01:00.1: setting latency timer to 64
tg3 0000:01:00.1: eth1: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:27
tg3 0000:01:00.1: eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.1: eth1: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth2: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:28
tg3 0000:02:00.0: eth2: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0: eth2: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 36 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
tg3 0000:02:00.1: setting latency timer to 64
tg3 0000:02:00.1: eth3: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:29
tg3 0000:02:00.1: eth3: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.1: eth3: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
ACPI: WMI: Mapper loaded
usb 1-1: new high speed USB device using ehci_hcd and address 2
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 65 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 65 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdc4ff000 port 0xdc4ff100 irq 65
ata2: SATA max UDMA/133 abar m2048@0xdc4ff000 port 0xdc4ff180 irq 65
ata3: SATA max UDMA/133 abar m2048@0xdc4ff000 port 0xdc4ff200 irq 65
ata4: SATA max UDMA/133 abar m2048@0xdc4ff000 port 0xdc4ff280 irq 65
ata5: SATA max UDMA/133 abar m2048@0xdc4ff000 port 0xdc4ff300 irq 65
ata6: SATA max UDMA/133 abar m2048@0xdc4ff000 port 0xdc4ff380 irq 65
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 1799.999 MHz.
Switching to clocksource tsc
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata5.00: ATAPI: TSSTcorp DVD-ROM SU-108CB, D250, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp DVD-ROM SU-108CB D250 PQ: 0 ANSI: 5
usb 1-1.2: new low speed USB device using ehci_hcd and address 3
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0324
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: HP Basic USB Keyboard
usb 1-1.2: Manufacturer: Lite-On Technology Corp.
usb 1-1.2: configuration #1 chosen from 1 choice
input: Lite-On Technology Corp. HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
generic-usb 0003:03F0:0324.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. HP Basic USB Keyboard] on usb-0000:00:1a.0-1.2/input0
usb 1-1.4: new low speed USB device using ehci_hcd and address 4
usb 1-1.4: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB OPTICAL MOUSE
usb 1-1.4: Manufacturer: PIXART
usb 1-1.4: configuration #1 chosen from 1 choice
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.4/input0
usb 1-1.5: new high speed USB device using ehci_hcd and address 5
usb 1-1.5: New USB device found, idVendor=13fe, idProduct=3600
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.5: Product: USB DISK 2.0
usb 1-1.5: Manufacturer:
usb 1-1.5: SerialNumber: 07A503003A4DDD06
usb 1-1.5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.6: new high speed USB device using ehci_hcd and address 6
usb 1-1.6: New USB device found, idVendor=413c, idProduct=a001
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
usb 1-1.6: configuration #1 chosen from 1 choice
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
usb 1-1.6.1: new high speed USB device using ehci_hcd and address 7
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20121018
usb 1-1.6.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input4
generic-usb 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/input/input5
generic-usb 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/input/input6
generic-usb 0003:0624:0249.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] Attached SCSI removable disk
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/live-rw
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1454524943.776:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC MC: Ver: 2.1.0 Jun 18 2012
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC sbridge: Driver loaded.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr 4:0:0:0: Attached scsi generic sg0 type 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
megasas: 0x1000:0x0073:0x1028:0x1f51: bus 3:slot 0:func 0
alloc irq_desc for 42 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:03:00.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42
megaraid_sas 0000:03:00.0: setting latency timer to 64
megasas: FW now in Ready state
alloc irq_desc for 66 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:03:00.0: irq 66 for MSI/MSI-X
udev: renamed network interface eth0 to em1
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
scsi7 : LSI SAS based MegaRAID driver
scsi 7:0:0:0: Direct-Access ATA ST9500620NS AA09 PQ: 0 ANSI: 5
scsi 7:0:1:0: Direct-Access ATA ST9500620NS AA09 PQ: 0 ANSI: 5
scsi 7:0:32:0: Enclosure DP BP12G+ 1.00 PQ: 0 ANSI: 5
scsi 7:2:0:0: Direct-Access DELL PERC H310 2.12 PQ: 0 ANSI: 5
scsi 7:0:32:0: Attached scsi generic sg2 type 13
sd 7:2:0:0: Attached scsi generic sg3 type 0
udev: renamed network interface eth3 to em4
sd 7:2:0:0: [sdb] 975699968 512-byte logical blocks: (499 GB/465 GiB)
sd 7:2:0:0: [sdb] Write Protect is off
sd 7:2:0:0: [sdb] Mode Sense: 1f 00 10 08
sd 7:2:0:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 7:2:0:0: [sdb] Attached SCSI disk
ACPI Error: No handler for Region [SYSI] (ffff88012d6a5420) [IPMI] (20090903/evregion-319)
ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88012d6a98f8), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88012d6a9998), AE_NOT_EXIST
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-759)
udev: renamed network interface eth2 to em3
ses 7:0:32:0: Attached Enclosure device
udev: renamed network interface eth1 to em2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
Adding 8359928k swap on /dev/sdb5. Priority:-1 extents:1 across:8359928k
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts:
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tg3 0000:02:00.1: PCI INT B disabled
tg3 0000:02:00.0: PCI INT A disabled
tg3 0000:01:00.1: PCI INT B disabled
tg3 0000:01:00.0: PCI INT A disabled
Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.00-0 (2011/06/13)
tg3.c:v3.119 (May 18, 2011)
tg3 0000:01:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
tg3 0000:01:00.0: setting latency timer to 64
tg3 0000:01:00.0: eth0: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:26
tg3 0000:01:00.0: eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:01:00.1: PCI INT B -> GSI 38 (level, low) -> IRQ 38
tg3 0000:01:00.1: setting latency timer to 64
tg3 0000:01:00.1: eth1: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:27
tg3 0000:01:00.1: eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.1: eth1: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth2: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:28
tg3 0000:02:00.0: eth2: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0: eth2: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:02:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
tg3 0000:02:00.1: setting latency timer to 64
tg3 0000:02:00.1: eth3: Tigon3 [partno(none) rev 5720000] (PCI Express) MAC address c8:1f:66:d7:7a:29
tg3 0000:02:00.1: eth3: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.1: eth3: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
dca service started, version 1.12.1
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k
Copyright (c) 2007-2011 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.4.8-k
ixgbe: Copyright (c) 1999-2011 Intel Corporation.
udev: renamed network interface eth0 to em1
udev: renamed network interface eth1 to em2
udev: renamed network interface eth2 to em3
udev: renamed network interface eth3 to em4
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
TECH PREVIEW: FCOE Target support may not be fully supported.
Please review provided documentation for limitations.
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.23.1.el6.x86_64
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.23.1.el6.x86_64
TCM: Registered subsystem plugin: rd_dr struct module: (null)
TCM: Registered subsystem plugin: rd_mcp struct module: (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0
Type: Direct-Access ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa02a1ee0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa04b17c0
TCM: Registered subsystem plugin: iblock struct module: ffffffffa04b8880
alloc irq_desc for 67 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 71 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em3: link is not ready
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 76 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em4: link is not ready
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.0: irq 77 for MSI/MSI-X
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.0: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.0: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.0: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.0: irq 81 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.1: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.1: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.1: irq 84 for MSI/MSI-X
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.1: irq 85 for MSI/MSI-X
alloc irq_desc for 86 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:01:00.1: irq 86 for MSI/MSI-X
tg3 0000:02:00.0: em3: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: em3: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_UP): em2: link is not ready
ADDRCONF(NETDEV_CHANGE): em3: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 10
ipmi_si: Could not enable interrupts, failed set, using polled mode.
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized
ipmi device interface
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 10
ipmi_si: Could not enable interrupts, failed set, using polled mode.
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized
em3: no IPv6 routers present
Fusion MPT base driver 3.04.19
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.19
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mpt2sas version 09.101.00.00 loaded
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
readahead-collector: sorting
readahead-collector: finished
fuse init (API version 7.13)
IPMI System Interface driver.
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 10
ipmi_si: Could not enable interrupts, failed set, using polled mode.
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized