dmesg - 2
microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.3.3-6-default (geeko@buildhost) (gcc version 5.2.1 20151008 [gcc-5-branch revision 228597] (SUSE Linux) ) #1 SMP PREEMPT Fri Jan 8 18:34:17 UTC 2016 (da39cbd)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000aed8efff] usable
BIOS-e820: [mem 0x00000000aed8f000-0x00000000aede0fff] ACPI NVS
BIOS-e820: [mem 0x00000000aede1000-0x00000000aee08fff] reserved
BIOS-e820: [mem 0x00000000aee09000-0x00000000aee09fff] usable
BIOS-e820: [mem 0x00000000aee0a000-0x00000000aee0cfff] ACPI NVS
BIOS-e820: [mem 0x00000000aee0d000-0x00000000aee0dfff] ACPI data
BIOS-e820: [mem 0x00000000aee0e000-0x00000000aee17fff] ACPI NVS
BIOS-e820: [mem 0x00000000aee18000-0x00000000aee3cfff] reserved
BIOS-e820: [mem 0x00000000aee3d000-0x00000000aee7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000aee80000-0x00000000aeffffff] usable
BIOS-e820: [mem 0x00000000af800000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x02500018-0x02510057] usable ==> usable
e820: update [mem 0x0230d018-0x02315057] usable ==> usable
e820: update [mem 0x02511018-0x02519057] usable ==> usable
e820: update [mem 0x0251a018-0x02525057] usable ==> usable
e820: update [mem 0x02526018-0x02531057] usable ==> usable
e820: update [mem 0x02532018-0x02541857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000000230d017] usable
reserve setup_data: [mem 0x000000000230d018-0x0000000002315057] usable
reserve setup_data: [mem 0x0000000002315058-0x0000000002500017] usable
reserve setup_data: [mem 0x0000000002500018-0x0000000002510057] usable
reserve setup_data: [mem 0x0000000002510058-0x0000000002511017] usable
reserve setup_data: [mem 0x0000000002511018-0x0000000002519057] usable
reserve setup_data: [mem 0x0000000002519058-0x000000000251a017] usable
reserve setup_data: [mem 0x000000000251a018-0x0000000002525057] usable
reserve setup_data: [mem 0x0000000002525058-0x0000000002526017] usable
reserve setup_data: [mem 0x0000000002526018-0x0000000002531057] usable
reserve setup_data: [mem 0x0000000002531058-0x0000000002532017] usable
reserve setup_data: [mem 0x0000000002532018-0x0000000002541857] usable
reserve setup_data: [mem 0x0000000002541858-0x000000001fffffff] usable
reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
reserve setup_data: [mem 0x0000000020200000-0x000000003fffffff] usable
reserve setup_data: [mem 0x0000000040000000-0x00000000401fffff] reserved
reserve setup_data: [mem 0x0000000040200000-0x00000000aed8efff] usable
reserve setup_data: [mem 0x00000000aed8f000-0x00000000aede0fff] ACPI NVS
reserve setup_data: [mem 0x00000000aede1000-0x00000000aee08fff] reserved
reserve setup_data: [mem 0x00000000aee09000-0x00000000aee09fff] usable
reserve setup_data: [mem 0x00000000aee0a000-0x00000000aee0cfff] ACPI NVS
reserve setup_data: [mem 0x00000000aee0d000-0x00000000aee0dfff] ACPI data
reserve setup_data: [mem 0x00000000aee0e000-0x00000000aee17fff] ACPI NVS
reserve setup_data: [mem 0x00000000aee18000-0x00000000aee3cfff] reserved
reserve setup_data: [mem 0x00000000aee3d000-0x00000000aee7ffff] ACPI NVS
reserve setup_data: [mem 0x00000000aee80000-0x00000000aeffffff] usable
reserve setup_data: [mem 0x00000000af800000-0x00000000bf9fffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000043fdfffff] usable
efi: EFI v2.00 by American Megatrends
efi: SMBIOS=0xaee3bc98 ACPI=0xaedd9000 ACPI 2.0=0xaedd9000 MPS=0xfcbe0
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H67M-GE/HT, BIOS P1.40 02/18/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FC0000000 write-back
2 base 0AF800000 mask FFF800000 uncachable
3 base 0B0000000 mask FF0000000 uncachable
4 base 0C0000000 mask FC0000000 uncachable
5 base 43FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf20-0x000fcf2f] mapped at [ffff8800000fcf20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0423e000, 0x0423efff] PGTABLE
BRK [0x0423f000, 0x0423ffff] PGTABLE
BRK [0x04240000, 0x04240fff] PGTABLE
init_memory_mapping: [mem 0x43fc00000-0x43fdfffff]
[mem 0x43fc00000-0x43fdfffff] page 2M
BRK [0x04241000, 0x04241fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43fbfffff]
[mem 0x420000000-0x43fbfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xaed8efff]
[mem 0x40200000-0xaebfffff] page 2M
[mem 0xaec00000-0xaed8efff] page 4k
BRK [0x04242000, 0x04242fff] PGTABLE
BRK [0x04243000, 0x04243fff] PGTABLE
init_memory_mapping: [mem 0xaee09000-0xaee09fff]
[mem 0xaee09000-0xaee09fff] page 4k
init_memory_mapping: [mem 0xaee80000-0xaeffffff]
[mem 0xaee80000-0xaeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x3dc85000-0x3eb13fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000AEDD9000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000AEDD9068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000AEDE0780 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000AEDD9150 00762E (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000AEE0FF80 000040
ACPI: APIC 0x00000000AEDE0878 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000AEDE08F0 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000AEDE09F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 0x00000000AEDE0A38 0000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000AEDE0AF8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
NODE_DATA(0) allocated [mem 0x43fdde000-0x43fdf1fff]
Reserving 256MB of memory at 640MB for crashkernel (System RAM: 16104MB)
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f800000-ffff88043f3fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000aed8efff]
node 0: [mem 0x00000000aee09000-0x00000000aee09fff]
node 0: [mem 0x00000000aee80000-0x00000000aeffffff]
node 0: [mem 0x0000000100000000-0x000000043fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]
On node 0 totalpages: 4122799
DMA zone: 64 pages used for memmap
DMA zone: 159 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 11117 pages used for memmap
DMA32 zone: 711440 pages, LIFO batch:31
Normal zone: 53240 pages used for memmap
Normal zone: 3407360 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
Reserving Intel graphics stolen memory at 0xafa00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x0230d000-0x0230dfff]
PM: Registered nosave memory: [mem 0x02315000-0x02315fff]
PM: Registered nosave memory: [mem 0x02500000-0x02500fff]
PM: Registered nosave memory: [mem 0x02510000-0x02510fff]
PM: Registered nosave memory: [mem 0x02511000-0x02511fff]
PM: Registered nosave memory: [mem 0x02519000-0x02519fff]
PM: Registered nosave memory: [mem 0x0251a000-0x0251afff]
PM: Registered nosave memory: [mem 0x02525000-0x02525fff]
PM: Registered nosave memory: [mem 0x02526000-0x02526fff]
PM: Registered nosave memory: [mem 0x02531000-0x02531fff]
PM: Registered nosave memory: [mem 0x02532000-0x02532fff]
PM: Registered nosave memory: [mem 0x02541000-0x02541fff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xaed8f000-0xaede0fff]
PM: Registered nosave memory: [mem 0xaede1000-0xaee08fff]
PM: Registered nosave memory: [mem 0xaee0a000-0xaee0cfff]
PM: Registered nosave memory: [mem 0xaee0d000-0xaee0dfff]
PM: Registered nosave memory: [mem 0xaee0e000-0xaee17fff]
PM: Registered nosave memory: [mem 0xaee18000-0xaee3cfff]
PM: Registered nosave memory: [mem 0xaee3d000-0xaee7ffff]
PM: Registered nosave memory: [mem 0xaf000000-0xaf7fffff]
PM: Registered nosave memory: [mem 0xaf800000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88043fa00000 s98840 r8192 d32232 u524288
pcpu-alloc: s98840 r8192 d32232 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4058219
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4571168K/16491196K available (6758K kernel code, 1147K rwdata, 5000K rodata, 1608K init, 1552K bss, 647204K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.499 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.99 BogoMIPS (lpj=13169996)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff820b2000 - ffffffff820b8000)
ftrace: allocating 26342 entries in 103 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
#3
microcode: CPU3 microcode updated early to revision 0x29, date = 2013-06-12
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (26339.99 BogoMIPS)
node 0 initialised, 2818206 pages in 44ms
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xaed8f000-0xaede0fff] (335872 bytes)
PM: Registering ACPI NVS region [mem 0xaee0a000-0xaee0cfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xaee0e000-0xaee17fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xaee3d000-0xaee7ffff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 10:25:07, date: 01/14/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88043FBE2800 00038C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017FC9FF40 000084 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cd9ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:02.0: [8086:0112] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbd08000-0xfbd0800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbd07000-0xfbd073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbd06000-0xfbd063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbd05000-0xfbd057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbd04000-0xfbd040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 0x24: [mem 0xfbc10000-0xfbc101ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfbc00000-0xfbc0ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x24: [mem 0xfbb10000-0xfbb101ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfbb00000-0xfbb0ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfba00000-0xfba07fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfb900000-0xfb907fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05-06] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
pci 0000:06:00.0: [9005:00c0] type 00 class 0x010000
pci 0000:06:00.0: reg 0x10: [io 0xc100-0xc1ff]
pci 0000:06:00.0: reg 0x14: [mem 0xfb841000-0xfb841fff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0xfb820000-0xfb83ffff pref]
pci 0000:06:00.1: [9005:00c0] type 00 class 0x010000
pci 0000:06:00.1: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:06:00.1: reg 0x14: [mem 0xfb840000-0xfb840fff 64bit]
pci 0000:06:00.1: reg 0x30: [mem 0xfb800000-0xfb81ffff pref]
pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xfb800000-0xfb8fffff] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:07:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:07:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0230d018-0x03ffffff]
e820: reserve RAM buffer [mem 0x02500018-0x03ffffff]
e820: reserve RAM buffer [mem 0x02511018-0x03ffffff]
e820: reserve RAM buffer [mem 0x0251a018-0x03ffffff]
e820: reserve RAM buffer [mem 0x02526018-0x03ffffff]
e820: reserve RAM buffer [mem 0x02532018-0x03ffffff]
e820: reserve RAM buffer [mem 0xaed8f000-0xafffffff]
e820: reserve RAM buffer [mem 0xaee0a000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: [dma 3]
pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:05:00.0: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-06]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0xbfa00000-0xffffffff window]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:06: resource 4 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 5 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:06: resource 6 [io 0x0000-0x0cf7 window]
pci_bus 0000:06: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 9 [mem 0xbfa00000-0xffffffff window]
pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14908K (ffff88003dc85000 - ffff88003eb14000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xaad8f000-0xaed8f000] (64MB) mapped at [ffff8800aad8f000-ffff8800aed8efff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452767108.692:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90002000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05200 irq 29
ata4: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05280 irq 29
ata5: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xfbd05000 port 0xfbd05380 irq 29
ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfbc10000 port 0xfbc10100 irq 30
ata8: SATA max UDMA/133 abar m512@0xfbc10000 port 0xfbc10180 irq 30
ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 31
ata10: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 31
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 0:454:426
rtc_cmos 00:04: setting system clock to 2016-01-14 10:25:09 UTC (1452767109)
PM: Hibernation image not present or could not be loaded.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0CB6Q, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata9: SATA link down (SStatus 0 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: READ LOG DMA EXT failed, trying unqueued
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0CB6Q, max UDMA/133
ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3292.521 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b3911c3, max_idle_ns: 440795347484 ns
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1118 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: ATAPI iHAS324 B, AL15, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM ATAPI iHAS324 B AL15 PQ: 0 ANSI: 5
clocksource: Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
sd 6:0:0:0: [sde] Attached SCSI disk
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1 sdf2
sd 7:0:0:0: [sdf] Attached SCSI disk
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: ATA-9: SanDisk Ultra II 480GB, X41100RL, max UDMA/133
ata10.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata10.00: configured for UDMA/133
scsi 9:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
sd 9:0:0:0: [sdg] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 9:0:0:0: [sdg] Write Protect is off
sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sdg] Attached SCSI disk
Freeing unused kernel memory: 1608K (ffffffff81f20000 - ffffffff820b2000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1420K (ffff88000369d000 - ffff880003800000)
Freeing unused kernel memory: 1144K (ffff880003ce2000 - ffff880003e00000)
random: systemd urandom read with 41 bits of entropy available
systemd[1]: systemd 224 running in system mode. (+PAM +AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Created slice -.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Load Kernel Modules...
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:0: Attached scsi generic sg4 type 5
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 7:0:0:0: Attached scsi generic sg6 type 0
sd 9:0:0:0: Attached scsi generic sg7 type 0
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Journal Service...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Load Kernel Modules.
audit: type=1130 audit(1452767112.768:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Create list of required static device nodes for the current kernel.
audit: type=1130 audit(1452767112.772:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1452767112.788:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1452767112.792:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1452767112.796:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767112.836:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767112.864:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
audit: type=1130 audit(1452767112.892:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767112.900:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
[drm] Initialized drm 1.1.0 20060810
ACPI: bus type USB registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.3-6-default xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.3.3-6-default xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.3.3-6-default xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.3.3-6-default xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xffffc900018c2000, 00:25:22:a6:f6:c3, XID 0c200000 IRQ 34
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
ehci-pci: EHCI PCI platform driver
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found
[drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
FDC 0 is a post-1991 82077
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbd07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.3.3-6-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
r8169 0000:07:00.0 enp7s0: renamed from eth0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbd06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.3.3-6-default ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
raid6: sse2x1 gen() 9074 MB/s
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
random: nonblocking pool is initialized
raid6: sse2x1 xor() 7118 MB/s
fbcon: inteldrmfb (fb0) is primary device
md: bind
md: raid1 personality registered for level 1
md/raid1:md1: active with 1 out of 2 mirrors
created bitmap (8 pages) for device md1
md1: bitmap initialized from disk: read 1 pages, set 3139 of 14902 bits
md1: detected capacity change from 0 to 1000006868992
raid6: sse2x2 gen() 11367 MB/s
Console: switching to colour frame buffer device 240x67
raid6: sse2x2 xor() 8148 MB/s
usb 1-1: new high-speed USB device number 2 using xhci_hcd
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 5-1: new high-speed USB device number 2 using ehci-pci
raid6: sse2x4 gen() 13352 MB/s
raid6: sse2x4 xor() 9821 MB/s
raid6: using algorithm sse2x4 gen() 13352 MB/s
raid6: .... xor() 9821 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 26666.000 MB/sec
BTRFS: using crc32c-intel for crc32c
Btrfs loaded, assert=on
BTRFS: device fsid 45a42e23-537a-48a0-ad86-1a5df18c3b52 devid 1 transid 15792 /dev/sda3
usb 1-1: New USB device found, idVendor=04e8, idProduct=330c
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: ML-1860 Series
usb 1-1: Manufacturer: Samsung Electronics Co., Ltd.
usb 1-1: SerialNumber: Z5NABKAB400155Y.
usb 1-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 5-1: New USB device found, idVendor=8087, idProduct=0024
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
usb 1-2: new full-speed USB device number 3 using xhci_hcd
usb 6-1: New USB device found, idVendor=8087, idProduct=0024
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
usb 1-2: New USB device found, idVendor=0c45, idProduct=613b
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB camera
usb 1-2: ep 0x83 - rounding interval to 512 microframes, ep desc says 800 microframes
usb 6-1.1: new low-speed USB device number 3 using ehci-pci
usb 6-1.1: New USB device found, idVendor=046d, idProduct=c517
usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.1: Product: USB Receiver
usb 6-1.1: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:046D:C517.0001/input/input5
logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
usb 6-1.2: new low-speed USB device number 4 using ehci-pci
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C517.0002/input/input6
logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
usb 6-1.2: New USB device found, idVendor=051d, idProduct=0002
usb 6-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 6-1.2: Product: Back-UPS ES 700G FW:871.O1 .I USB FW:O1
usb 6-1.2: Manufacturer: APC
usb 6-1.2: SerialNumber: 3B0937X31037
hid-generic 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [APC Back-UPS ES 700G FW:871.O1 .I USB FW:O1 ] on usb-0000:00:1d.0-1.2/input0
scsi host10: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi host11: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsi 11:0:3:0: Sequential-Access HP C5683A C305 PQ: 0 ANSI: 3
scsi target11:0:3: Beginning Domain Validation
scsi target11:0:3: wide asynchronous
scsi target11:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 32)
scsi target11:0:3: Domain Validation skipping write tests
scsi target11:0:3: Ending Domain Validation
scsi 11:0:3:0: Attached scsi generic sg8 type 1
audit_printk_skb: 9 callbacks suppressed
audit: type=1130 audit(1452767151.296:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767151.320:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767151.340:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
BTRFS info (device sda3): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
audit: type=1130 audit(1452767151.440:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1452767151.440:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767151.472:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767151.480:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1452767151.480:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1452767151.492:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1452767151.492:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[149]: Received SIGTERM from PID 1 (systemd).
BTRFS info (device sda3): disk space caching is enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
st: Version 20101219, fixed bufsize 32768, s/g segs 256
st 11:0:3:0: Attached scsi tape st0
st 11:0:3:0: st0: try direct i/o: yes (alignment 4 B)
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
usb 1-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20150818/utaddress-254)
usb 1-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20150818/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20150818/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330C
usbcore: registered new interface driver usblp
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
input: PC Speaker as /devices/platform/pcspkr/input/input7
md: bind
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
md/raid1:md0: active with 1 out of 2 mirrors
created bitmap (1 pages) for device md0
md0: bitmap initialized from disk: read 1 pages, set 3 of 3 bits
md0: detected capacity change from 0 to 196071424
md0:
iTCO_vendor_support: vendor-support=0
ppdev: user-space parallel port driver
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Adding 2104316k swap on /dev/sda2. Priority:-1 extents:1 across:2104316k SSFS
Adding 8388604k swap on /dev/mapper/system-swap. Priority:-2 extents:1 across:8388604k FS
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-journald[784]: Received request to flush runtime journal from PID 1
systemd-journald[784]: File /var/log/journal/71a6567ee02fb34390f8383856542acb/system.journal corrupted or uncleanly shut down, renaming and replacing.
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: sonixj-2.14.0 probing 0c45:613b
input: sonixj as /devices/pci0000:00/0000:00:1c.2/0000:03:00.0/usb1/1-2/input/input16
usbcore: registered new interface driver sonixj
EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
No iBFT detected.
r8169 0000:07:00.0 enp7s0: link down
r8169 0000:07:00.0 enp7s0: link down
r8169 0000:07:00.0 enp7s0: link up
NET: Registered protocol family 17
fuse init (API version 7.23)
md0:
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
sdg:
sdg:
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sdg1): Mounting V5 Filesystem
XFS (sdg1): Ending clean mount
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
[drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request.
[drm:__gen6_gt_wait_for_thread_c0.isra.14 [i915]] *ERROR* GT thread status wait timed out
------------[ cut here ]------------
WARNING: CPU: 3 PID: 2498 at ../drivers/gpu/drm/i915/intel_uncore.c:238 __gen6_gt_wait_for_fifo+0xa7/0xb0 [i915]()
WARN_ON(loop < 0 && fifo