dmesg - cpu1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.94-kr (root@slickslack) (gcc version 4.8.2 (GCC) ) #2 SMP Thu Jan 14 13:36:25 MST 2016
Command line: BOOT_IMAGE=experimental ro root=fd02 vt.default_utf8=1
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffacfff] usable
BIOS-e820: [mem 0x00000000bffad000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: HP Pavilion m6 1035dx/Pavilion m6 1035dx, BIOS kryptonradius 11/21/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 base 0000FFC00000 mask FFFFFFC00000 write-protect
7 disabled
TOM2: 000000021f000000 aka 8688M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbffad max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f1ae0-0x000f1aef] mapped at [ffff8800000f1ae0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01899000, 0x01899fff] PGTABLE
BRK [0x0189a000, 0x0189afff] PGTABLE
BRK [0x0189b000, 0x0189bfff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x0189c000, 0x0189cfff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbffacfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbffacfff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x7fab8000-0x7fffffff]
ACPI: RSDP 0x00000000000F1D30 00024 (v02 CORE )
ACPI: XSDT 0x00000000BFFC70E0 0006C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x00000000BFFC96B0 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0x00000000BFFC7280 02423 (v02 AMD COREBOOT 00010001 INTL 20150204)
ACPI: FACS 0x00000000BFFC7240 00040
ACPI: SSDT 0x00000000BFFC97B0 00046 (v02 CORE COREBOOT 0000002A CORE 0000002A)
ACPI: TCPA 0x00000000BFFC9800 00032 (v02 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x00000000BFFC9840 00072 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HPET 0x00000000BFFC98C0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HEST 0x00000000BFFC9900 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: IVRS 0x00000000BFFC9AD0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
ACPI: SSDT 0x00000000BFFC9B40 01ED4 (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: SSDT 0x00000000BFFCBA20 00B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbffacfff]
node 0: [mem 0x100000000-0x21effffff]
On node 0 totalpages: 1961803
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12223 pages used for memmap
DMA32 zone: 782253 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x818
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bffad000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 24 pages/cpu @ffff88021ec00000 s68864 r8192 d21248 u524288
pcpu-alloc: s68864 r8192 d21248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1931127
Kernel command line: BOOT_IMAGE=experimental ro root=fd02 vt.default_utf8=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 7565496k/8896512k available (5113k kernel code, 1049300k absent, 281716k reserved, 2235k data, 788k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
NR_IRQS:4352 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2295.938 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.87 BogoMIPS (lpj=2295938)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
MCE: In-kernel MCE decoding enabled.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (18367.50 BogoMIPS)
devtmpfs: initialized
xor: automatically using best checksumming function:
avx : 2800.000 MB/sec
atomic64 test passed for x86-64 platform with CX8 and with SSE
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
raid6: sse2x1 2664 MB/s
raid6: sse2x2 4671 MB/s
raid6: sse2x4 7289 MB/s
raid6: using algorithm sse2x4 (7289 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S2 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:9900] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:01.0: reg 14: [io 0x2000-0x20ff]
pci 0000:00:01.0: reg 18: [mem 0xf0380000-0xf03bffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xf03c0000-0xf03c3fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xf03c8000-0xf03c9fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0x2410-0x2417]
pci 0000:00:11.0: reg 14: [io 0x2420-0x2423]
pci 0000:00:11.0: reg 18: [io 0x2418-0x241f]
pci 0000:00:11.0: reg 1c: [io 0x2424-0x2427]
pci 0000:00:11.0: reg 20: [io 0x2400-0x240f]
pci 0000:00:11.0: reg 24: [mem 0xf03cd000-0xf03cd7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xf03ca000-0xf03cafff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xf03ce000-0xf03ce0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xf03cb000-0xf03cbfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xf03cf000-0xf03cf0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xf03c4000-0xf03c7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xf03cc000-0xf03ccfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
pci 0000:00:14.7: reg 10: [mem 0xf03d0000-0xf03d00ff 64bit]
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10ec:5289] type 00 class 0xff0000
pci 0000:01:00.0: reg 10: [mem 0xf0100000-0xf010ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.2: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.2: reg 10: [io 0x1000-0x10ff]
pci 0000:01:00.2: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:01:00.2: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:01:00.2: supports D1 D2
pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
pci 0000:02:00.0: reg 10: [mem 0xf0200000-0xf027ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xf0280000-0xf028ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
ACPI: Enabled 5 GPEs in block 00 to 1F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffad000-0xbfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xe0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5408k freed
AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: no GSI
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PreF PPR GT IA
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbfad000-0xbffad000] (64MB) mapped at [ffff8800bbfad000-ffff8800bffacfff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1452810957.800:1): initialized
bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 14786
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: Failed to enable APEI firmware first mode.
brd: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf03cd000 port 0xf03cd100 irq 19
ata2: SATA max UDMA/133 abar m2048@0xf03cd000 port 0xf03cd180 irq 19
ata3: SATA max UDMA/133 abar m2048@0xf03cd000 port 0xf03cd200 irq 19
ata4: SATA max UDMA/133 abar m2048@0xf03cd000 port 0xf03cd280 irq 19
ata5: SATA max UDMA/133 abar m2048@0xf03cd000 port 0xf03cd300 irq 19
ata6: SATA max UDMA/133 abar m2048@0xf03cd000 port 0xf03cd380 irq 19
scsi6 : pata_legacy
ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA50A, max UDMA/100
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54756 JEDO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi7 : pata_legacy
ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Key type dns_resolver registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
registered taskstats version 1
regulator-dummy: disabling
Freeing unused kernel memory: 788k freed
udevd[152]: starting version 182
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tsc: Refined TSC clocksource calibration: 2295.825 MHz
Switching to clocksource tsc
bio: create slab at 1
bio: create slab at 1
PM: Starting manual resume from disk
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
loop: module loaded
udevd[299]: starting version 182
microcode: CPU0: patch_level=0x0600110f
microcode: CPU0: new patch_level=0x06001119
microcode: CPU1: patch_level=0x0600110f
microcode: CPU2: patch_level=0x0600110f
microcode: CPU2: new patch_level=0x06001119
microcode: CPU3: patch_level=0x0600110f
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BATX] (battery absent)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
rtsx_pci 0000:01:00.0: irq 43 for MSI/MSI-X
rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:12.0: irq 18, io mem 0xf03ca000
ehci-pci: EHCI PCI platform driver
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.94-kr ohci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf03cb000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.94-kr ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:14.5: irq 18, io mem 0xf03cc000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.94-kr ohci_hcd
usb usb3: SerialNumber: 0000:00:14.5
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.94-kr xhci_hcd
usb usb4: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.94-kr xhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf03ce000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.2: irq 49 for MSI/MSI-X
r8169 0000:01:00.2 eth0: RTL8411 at 0xffffc90000596000, ac:16:2d:4c:12:5e, XID 08800800 IRQ 49
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.94-kr ehci_hcd
usb usb6: SerialNumber: 0000:00:12.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf03cf000
r8169 0000:01:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.10.94-kr ehci_hcd
usb usb7: SerialNumber: 0000:00:13.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ACPI: acpi_idle registered with cpuidle
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
mmc1: no vqmmc regulator found
mmc1: no vmmc regulator found
mmc1: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 7-1: new high-speed USB device number 2 using ehci-pci
i2c /dev entries driver
usb 7-1: New USB device found, idVendor=064e, idProduct=c336
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: HP TrueVision HD
usb 7-1: Manufacturer: SuYin
usb 7-1: SerialNumber: HF1318-P62A-SN03-VH-R02.00.06
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Linux agpgart interface v0.103
cfg80211: Calling CRDA to update world regulatory domain
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90000900000, irq=17
hda-intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 50 for MSI/MSI-X
usb 2-3: new full-speed USB device number 2 using ohci_hcd
[drm] Initialized drm 1.1.0 20060810
usb 2-3: New USB device found, idVendor=138a, idProduct=0018
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 2-3: SerialNumber: 73392c339b77
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[drm] radeon kernel modesetting enabled.
acpi-cpufreq: overriding BIOS provided _PSD data
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[drm] initializing kernel modesetting (ARUBA 0x1002:0x9900 0x1002:0x9900).
[drm] register mmio base: 0xF0380000
[drm] register mmio size: 262144
ATOM BIOS: HP
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 3785856 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading ARUBA Microcode
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1119595
[drm] PCIE GART of 512M enabled (table at 0x0000000000276000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88020fef8c00
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88020fef8c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88020fef8c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88020fef8c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88020fef8c10
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 51 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] LCD1: TRAVIS
[drm] Connector 1:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
Linux video capture interface: v2.00
[drm] fb mappable at 0xE1382000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:c336)
input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb7/7-1/7-1:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.33.0 20080528 for 0000:00:01.0 on minor 0
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Adding 8388604k swap on /dev/mapper/kryptvg-swap. Priority:-1 extents:1 across:8388604k
fuse init (API version 7.22)
EXT4-fs (dm-2): re-mounted. Opts: (null)
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
r8169 0000:01:00.2 eth0: link down
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 02:23:69:7f:7c:22
wlan0: send auth to 02:23:69:7f:7c:22 (try 1/3)
wlan0: authenticated
wlan0: associate with 02:23:69:7f:7c:22 (try 1/3)
wlan0: RX AssocResp from 02:23:69:7f:7c:22 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
traps: xfce4-sensors-p[1161] general protection ip:7f4bc3f54d80 sp:7ffcc88f03d0 error:0 in libxfce4sensors.so.1.2.4[7f4bc3f50000+a000]
traps: xfce4-sensors-p[1201] general protection ip:7f19449fcd80 sp:7ffe75a61630 error:0 in libxfce4sensors.so.1.2.4[7f19449f8000+a000]
traps: xfce4-sensors-p[1288] general protection ip:7f7d655f4d80 sp:7fff71e29810 error:0 in libxfce4sensors.so.1.2.4[7f7d655f0000+a000]
traps: xfce4-sensors-p[1289] general protection ip:7f943a6bcd80 sp:7ffcdd741130 error:0 in libxfce4sensors.so.1.2.4[7f943a6b8000+a000]
traps: xfce4-sensors-p[1290] general protection ip:7f9c4199cd80 sp:7ffd46898e90 error:0 in libxfce4sensors.so.1.2.4[7f9c41998000+a000]