dmesg - McClenaghan
microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-16-generic (buildd@lcy01-07) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 15:35:06 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 0x240 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b9e60fff] usable
BIOS-e820: [mem 0x00000000b9e61000-0x00000000b9ebefff] reserved
BIOS-e820: [mem 0x00000000b9ebf000-0x00000000b9f81fff] usable
BIOS-e820: [mem 0x00000000b9f82000-0x00000000b9fbefff] ACPI NVS
BIOS-e820: [mem 0x00000000b9fbf000-0x00000000b9fe1fff] usable
BIOS-e820: [mem 0x00000000b9fe2000-0x00000000b9ff6fff] ACPI data
BIOS-e820: [mem 0x00000000b9ff7000-0x00000000b9ffffff] usable
BIOS-e820: [mem 0x00000000ba000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard Compaq Presario CQ71 Notebook PC/306B, BIOS F.06 06/03/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0FFF00000 mask FFFF00000 write-protect
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BA000000 mask FFE000000 uncachable
5 base 100000000 mask FC0000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[mem 0x120000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb9e60fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xb9dfffff] page 2M
[mem 0xb9e00000-0xb9e60fff] page 4k
init_memory_mapping: [mem 0xb9ebf000-0xb9f81fff]
[mem 0xb9ebf000-0xb9f81fff] page 4k
init_memory_mapping: [mem 0xb9fbf000-0xb9fe1fff]
[mem 0xb9fbf000-0xb9fe1fff] page 4k
init_memory_mapping: [mem 0xb9ff7000-0xb9ffffff]
[mem 0xb9ff7000-0xb9ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
RAMDISK: [mem 0x33fa6000-0x35fcafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000B9FF6120 000064 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x00000000B9FF5000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 0x00000000B9FE5000 00BB21 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 0x00000000B9F8F000 000040
ACPI: FACS 0x00000000B9F8F000 000040
ACPI: HPET 0x00000000B9FF4000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 0x00000000B9FF3000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 0x00000000B9FF2000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASF! 0x00000000B9FF1000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 0x00000000B9FE4000 000176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: BOOT 0x00000000B9FE3000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 0x00000000B9FE2000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000b9e60fff]
node 0: [mem 0x00000000b9ebf000-0x00000000b9f81fff]
node 0: [mem 0x00000000b9fbf000-0x00000000b9fe1fff]
node 0: [mem 0x00000000b9ff7000-0x00000000b9ffffff]
node 0: [mem 0x0000000100000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
On node 0 totalpages: 1023725
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11838 pages used for memmap
DMA32 zone: 757584 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbc000000-0xbfffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb9e61000-0xb9ebefff]
PM: Registered nosave memory: [mem 0xb9f82000-0xb9fbefff]
PM: Registered nosave memory: [mem 0xb9fe2000-0xb9ff6fff]
PM: Registered nosave memory: [mem 0xba000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007706
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3913156K/4094900K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 181744K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.101 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.20 BogoMIPS (lpj=7980404)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30905 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7980.40 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb9f82000-0xb9fbefff] (249856 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 20:47:46, date: 01/12/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013A5C5800 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013B017000 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013A59BA00 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013A5AB780 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4110-0x4117]
pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xd2400000-0xd24fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x40e0-0x40ff]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x40c0-0x40df]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xd4505c00-0xd4505fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4500000-0xd4503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x40a0-0x40bf]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x4080-0x409f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd4505800-0xd4505bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4108-0x410f]
pci 0000:00:1f.2: reg 0x14: [io 0x411c-0x411f]
pci 0000:00:1f.2: reg 0x18: [io 0x4100-0x4107]
pci 0000:00:1f.2: reg 0x1c: [io 0x4118-0x411b]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4505000-0xd45057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd4506000-0xd45060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xd4504000-0xd4504fff 64bit]
pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd3500000-0xd350ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd44fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd1410000-0xd1410fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd1400000-0xd140ffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xd2500000-0xd34fffff]
pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: Enabled 10 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb9e61000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9f82000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9fe2000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x0600-0x060f] has been reserved
system 00:01: [io 0x0610] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0810-0x0817] has been reserved
system 00:01: [io 0x0820-0x0823] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [io 0x0380-0x0387] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN1e08 SYN1e00 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd44fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd2500000-0xd250ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xd2500000-0xd34fffff]
pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xd3500000-0xd44fffff]
pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd2500000-0xd34fffff]
pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32916K (ffff880033fa6000 - ffff880035fcb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb5e61000-0xb9e61000] (64MB) mapped at [ffff8800b5e61000-ffff8800b9e60fff]
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452631668.568:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (84 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xd4505c00
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xd4505800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6a1c9c21f04ab86fd1d7ced6ca113540fc8e35b6'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:229:801
rtc_cmos 00:02: setting system clock to 2016-01-12 20:47:49 UTC (1452631669)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
random: systemd-udevd urandom read with 3 bits of entropy available
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0 eth0: RTL8102e at 0xffffc900007ae000, 00:23:8b:ef:90:47, XID 04c00000 IRQ 27
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xd4505000 port 0xd4505380 irq 26
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
r8169 0000:03:00.0 enp3s0: renamed from eth0
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
usb 2-4: new high-speed USB device number 2 using ehci-pci
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 2-4: New USB device found, idVendor=04f2, idProduct=b152
usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-4: Product: CNF8052
usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-4: SerialNumber: SN0001
usb 4-1: new full-speed USB device number 2 using uhci_hcd
usb 1-4: new high-speed USB device number 3 using ehci-pci
usb 4-1: New USB device found, idVendor=0c45, idProduct=6130
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: USB camera
usb 1-4: New USB device found, idVendor=1004, idProduct=6341
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: LGL25
usb 1-4: Manufacturer: LGE
usb 1-4: SerialNumber: LGOTMS4fdd30a0
usb-storage 1-4:1.3: USB Mass Storage device detected
scsi host6: usb-storage 1-4:1.3
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC64G, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 C64G PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398434de0df, max_idle_ns: 881590544331 ns
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0/0x0, board id: 0, fw id: 428212
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRAM GT20L, DC03, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20L DC03 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata5: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access LGE LGL25 Internal 0001 PQ: 0 ANSI: 2
scsi 6:0:0:1: Direct-Access LGE LGL25 SD card 0001 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Braille Device Support.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Reached target Slices.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started udev Coldplug all Devices.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[264]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
input: HP WMI hotkeys as /devices/virtual/input/input8
gpio_ich: GPIO from 451 to 511 on gpio_ich
media: Linux media interface: v0.10
Linux video capture interface: v2.00
cdc_acm 1-4:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD75B2X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Mic=0xb
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000820000, irq=16
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
uvcvideo: Found UVC 1.00 device CNF8052 (04f2:b152)
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: CNF8052 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
gspca_main: v2.14.0 registered
gspca_main: sonixj-2.14.0 probing 0c45:6130
input: sonixj as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/input/input13
usbcore: registered new interface driver sonixj
audit: type=1400 audit(1452631687.912:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631687.916:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.076:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.076:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.076:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.076:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.544:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.544:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.544:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1452631688.544:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=517 comm="apparmor_parser"
Adding 4093436k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4093436k FS
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 10:fe:ed:2d:73:8e
wlp2s0: send auth to 10:fe:ed:2d:73:8e (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 10:fe:ed:2d:73:8e (try 1/3)
wlp2s0: RX AssocResp from 10:fe:ed:2d:73:8e (capab=0x431 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
perf interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 4-1: USB disconnect, device number 2
usb 4-1: new full-speed USB device number 3 using uhci_hcd
usb 4-1: New USB device found, idVendor=0c45, idProduct=6130
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: USB camera
gspca_main: sonixj-2.14.0 probing 0c45:6130
input: sonixj as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/input/input14
UDF-fs: INFO Mounting volume 'UDF Volume', timestamp 2011/04/12 09:38 (1000)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000