dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-16-generic (buildd@lcy01-07) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 15:35:06 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00bf800000
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd312fff] usable
BIOS-e820: [mem 0x00000000bd313000-0x00000000bd342fff] reserved
BIOS-e820: [mem 0x00000000bd343000-0x00000000bd621fff] usable
BIOS-e820: [mem 0x00000000bd622000-0x00000000bd740fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd741000-0x00000000bea26fff] reserved
BIOS-e820: [mem 0x00000000bea27000-0x00000000bea27fff] usable
BIOS-e820: [mem 0x00000000bea28000-0x00000000bec2dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bec2e000-0x00000000bf035fff] usable
BIOS-e820: [mem 0x00000000bf036000-0x00000000bf7b6fff] reserved
BIOS-e820: [mem 0x00000000bf7b7000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7693/970A SLI Krait Edition (MS-7693), BIOS V25.3 12/08/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23edfffff]
[mem 0x220000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbd312fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbd1fffff] page 2M
[mem 0xbd200000-0xbd312fff] page 4k
init_memory_mapping: [mem 0xbd343000-0xbd621fff]
[mem 0xbd343000-0xbd3fffff] page 4k
[mem 0xbd400000-0xbd5fffff] page 2M
[mem 0xbd600000-0xbd621fff] page 4k
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
init_memory_mapping: [mem 0xbea27000-0xbea27fff]
[mem 0xbea27000-0xbea27fff] page 4k
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
init_memory_mapping: [mem 0xbec2e000-0xbf035fff]
[mem 0xbec2e000-0xbedfffff] page 4k
[mem 0xbee00000-0xbeffffff] page 2M
[mem 0xbf000000-0xbf035fff] page 4k
init_memory_mapping: [mem 0xbf7b7000-0xbf7fffff]
[mem 0xbf7b7000-0xbf7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x340c8000-0x3605bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD731070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BD7372A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
ACPI: DSDT 0x00000000BD731160 00613B (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BD73A080 000040
ACPI: APIC 0x00000000BD7373B0 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BD737450 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BD737498 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BD7374D8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000BD737510 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: IVRS 0x00000000BD738C28 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff4000-0x23eff8fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bd312fff]
node 0: [mem 0x00000000bd343000-0x00000000bd621fff]
node 0: [mem 0x00000000bea27000-0x00000000bea27fff]
node 0: [mem 0x00000000bec2e000-0x00000000bf035fff]
node 0: [mem 0x00000000bf7b7000-0x00000000bf7fffff]
node 0: [mem 0x0000000100001000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2083296
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12074 pages used for memmap
DMA32 zone: 772676 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306623 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd313000-0xbd342fff]
PM: Registered nosave memory: [mem 0xbd622000-0xbd740fff]
PM: Registered nosave memory: [mem 0xbd741000-0xbea26fff]
PM: Registered nosave memory: [mem 0xbea28000-0xbec2dfff]
PM: Registered nosave memory: [mem 0xbf036000-0xbf7b6fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023ec00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2050721
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 8020404K/8333184K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 312780K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:1032 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3500.412 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.82 BogoMIPS (lpj=14001648)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30905 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (56006.59 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbd622000-0xbd740fff] (1175552 bytes)
PM: Registering ACPI NVS region [mem 0xbea28000-0xbec2dfff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 14:05:26, date: 12/23/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
pci 0000:03:00.0: PME# supported from D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:04:06.0: [1814:0302] type 00 class 0x028000
pci 0000:04:06.0: reg 0x10: [mem 0xfe100000-0xfe107fff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd313000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd622000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbea28000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf036000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0485-0x0486] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] could not be reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:06: [mem 0xff800000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfeb00000-0xfeb03fff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec01000-0xfec010ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32336K (ffff8800340c8000 - ffff88003605c000)
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:04.0 to group 2
iommu: Adding device 0000:00:06.0 to group 3
iommu: Adding device 0000:00:11.0 to group 4
iommu: Adding device 0000:00:12.0 to group 5
iommu: Adding device 0000:00:12.2 to group 5
iommu: Adding device 0000:00:13.0 to group 6
iommu: Adding device 0000:00:13.2 to group 6
iommu: Adding device 0000:00:14.0 to group 7
iommu: Adding device 0000:00:14.2 to group 8
iommu: Adding device 0000:00:14.3 to group 9
iommu: Adding device 0000:00:14.4 to group 10
iommu: Adding device 0000:00:14.5 to group 11
iommu: Adding device 0000:00:15.0 to group 12
iommu: Adding device 0000:00:16.0 to group 13
iommu: Adding device 0000:00:16.2 to group 13
iommu: Adding device 0000:01:00.0 to group 14
iommu: Adding device 0000:01:00.1 to group 14
iommu: Adding device 0000:02:00.0 to group 15
iommu: Adding device 0000:03:00.0 to group 16
iommu: Adding device 0000:04:06.0 to group 10
iommu: Adding device 0000:05:00.0 to group 12
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1450879526.092:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-16-generic xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 4.2.0-16-generic ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6a1c9c21f04ab86fd1d7ced6ca113540fc8e35b6'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:762:81
rtc_cmos 00:03: setting system clock to 2015-12-23 14:05:27 UTC (1450879527)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 7 bits of entropy available
usb 5-5: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000ec8000, d8:cb:8a:7a:f4:9c, XID 0c900800 IRQ 46
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 7-3: new high-speed USB device number 2 using ehci-pci
r8169 0000:05:00.0 enp5s0: renamed from eth0
usb 7-3: New USB device found, idVendor=0951, idProduct=1624
usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-3: Product: DataTraveler G2
usb 7-3: Manufacturer: Kingston
usb 7-3: SerialNumber: 001372982A06F981B6421760
usb-storage 7-3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 7-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 9-2: new low-speed USB device number 2 using ohci-pci
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 9-2: New USB device found, idVendor=ffc0, idProduct=0040
usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-2: Product: USB Laser Mouse
usb 9-2: Manufacturer: Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:13.0/usb9/9-2/9-2:1.0/0003:FFC0:0040.0001/input/input5
hid-generic 0003:FFC0:0040.0001: input,hidraw0: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:13.0-2/input0
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: SanDisk SDSSDHP128G, X2306RL, max UDMA/133
ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 6RL PQ: 0 ANSI: 5
ata4.00: ATAPI: ATAPI iHAS324 B, AL14, max UDMA/100
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/100
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM ATAPI iHAS324 B AL14 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 3500.068 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3273917b7bc, max_idle_ns: 440795326860 ns
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 9-3: new full-speed USB device number 3 using ohci-pci
usb 9-3: New USB device found, idVendor=046d, idProduct=c52b
usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-3: Product: USB Receiver
usb 9-3: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input2
scsi 6:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 31252024 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 16 24 09 51
sd 6:0:0:0: [sdb] Incomplete mode parameter data
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
input: Logitech K400 as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:046D:C52B.0004/0003:046D:4024.0005/input/input6
logitech-hidpp-device 0003:046D:4024.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:13.0-3:1
usb 5-5: New USB device found, idVendor=046d, idProduct=082d
usb 5-5: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 5-5: Product: HD Pro Webcam C920
usb 5-5: SerialNumber: 54C9C81F
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 660 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
clocksource: Switched to clocksource tsc
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: systemd-modules-load.service: Unit entered failed state.
systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[286]: Received request to flush runtime journal from PID 1
wmi: Mapper loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
MCE: In-kernel MCE decoding enabled.
audit: type=1400 audit(1450839929.266:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1450839929.266:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=443 comm="apparmor_parser"
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1450839929.274:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1450839929.274:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1450839929.274:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1450839929.274:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=443 comm="apparmor_parser"
media: Linux media interface: v0.10
audit: type=1400 audit(1450839929.294:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1450839929.294:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1450839929.294:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=443 comm="apparmor_parser"
Linux video capture interface: v2.00
Adding 8332284k swap on /dev/sda6. Priority:-1 extents:1 across:8332284k SSFS
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
nvidia: module verification failed: signature and/or required key missing - tainting kernel
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:12.2/usb5/5-5/5-5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVLINK: Nvlink Core is being initialized, major device number 246
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 355.11 Wed Aug 26 16:35:41 PDT 2015
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
rt61pci 0000:04:06.0 wlp4s6: renamed from wlan0
random: nonblocking pool is initialized
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cgroup: new mount options do not match the existing superblock, will be ignored
usbcore: registered new interface driver snd-usb-audio
IPv6: ADDRCONF(NETDEV_UP): wlp4s6: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
IPv6: ADDRCONF(NETDEV_UP): wlp4s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link down
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s6: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input19
snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 14
r8169 0000:05:00.0 enp5s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
usb 5-5: reset high-speed USB device number 2 using ehci-pci
snd_hda_codec_hdmi hdaudioC2D0: HDMI: invalid ELD data byte 17
usb 5-5: reset high-speed USB device number 2 using ehci-pci
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x0000000000137000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x0000000000137080 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x0000000000137040 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000001370c0 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000001a0000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000001a0040 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000001a0080 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000001a00c0 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x000000000023c000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x000000000023c040 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x000000000023c080 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000002b7000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000002b7080 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000002b7040 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.4 domain=0x000b address=0x00000000002b70c0 flags=0x0000]
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 5549 MB/s
raid6: sse2x1 xor() 4020 MB/s
raid6: sse2x2 gen() 8548 MB/s
raid6: sse2x2 xor() 5609 MB/s
raid6: sse2x4 gen() 10630 MB/s
raid6: sse2x4 xor() 5213 MB/s
raid6: using algorithm sse2x4 gen() 10630 MB/s
raid6: .... xor() 5213 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 4489.000 MB/sec
Btrfs loaded
EXT4-fs (sda3): unable to read superblock
EXT4-fs (sda3): unable to read superblock
EXT4-fs (sda3): unable to read superblock
FAT-fs (sda3): bogus number of reserved sectors
FAT-fs (sda3): Can't find a valid FAT filesystem
XFS (sda3): Invalid superblock magic number
FAT-fs (sda3): bogus number of reserved sectors
FAT-fs (sda3): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sda3: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING