dmesg - carrizo-catalyst-xonotic-ultra
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-39-generic (buildd@lcy01-26) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #44~14.04.1-Ubuntu SMP Wed Dec 2 10:00:35 UTC 2015 (Ubuntu 3.19.0-39.44~14.04.1-generic 3.19.8-ckt9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00df800000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd052fff] usable
BIOS-e820: [mem 0x00000000dd053000-0x00000000ddb51fff] reserved
BIOS-e820: [mem 0x00000000ddb52000-0x00000000ddb81fff] ACPI data
BIOS-e820: [mem 0x00000000ddb82000-0x00000000de02dfff] ACPI NVS
BIOS-e820: [mem 0x00000000de02e000-0x00000000de3aefff] reserved
BIOS-e820: [mem 0x00000000de3af000-0x00000000de535fff] usable
BIOS-e820: [mem 0x00000000de536000-0x00000000deb5efff] reserved
BIOS-e820: [mem 0x00000000deb5f000-0x00000000df203fff] usable
BIOS-e820: [mem 0x00000000df204000-0x00000000df7f9fff] reserved
BIOS-e820: [mem 0x00000000df7fa000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000002feffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Dell Inc. Inspiron 5555/0CHHXW, BIOS A08 08/27/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x2ff000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF800000 mask FFFFFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000031f000000 aka 12784M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3576MB, range: 8MB, type UC
total RAM covered: 3576M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3576MB, range: 8MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
e820: update [mem 0xdf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb20-0x000fdb2f] mapped at [ffff8800000fdb20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x2fee00000-0x2feffffff]
[mem 0x2fee00000-0x2feffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x2e0000000-0x2fedfffff]
[mem 0x2e0000000-0x2fedfffff] page 2M
init_memory_mapping: [mem 0x2c0000000-0x2dfffffff]
[mem 0x2c0000000-0x2dfffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd052fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdcffffff] page 2M
[mem 0xdd000000-0xdd052fff] page 4k
init_memory_mapping: [mem 0xde3af000-0xde535fff]
[mem 0xde3af000-0xde535fff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0xdeb5f000-0xdf203fff]
[mem 0xdeb5f000-0xdebfffff] page 4k
[mem 0xdec00000-0xdf1fffff] page 2M
[mem 0xdf200000-0xdf203fff] page 4k
init_memory_mapping: [mem 0xdf7fa000-0xdf7fffff]
[mem 0xdf7fa000-0xdf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2bfffffff]
[mem 0x100000000-0x2bfffffff] page 1G
RAMDISK: [mem 0x35a2c000-0x36d0dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0580 000024 (v02 DELL )
ACPI: XSDT 0x00000000DDB6A098 0000B4 (v01 DELL CL09 01072009 AMI 00010013)
ACPI: FACP 0x00000000DDB74638 00010C (v05 DELL CL09 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-654)
ACPI: DSDT 0x00000000DDB6A1E0 00A453 (v02 DELL CL09 01072009 INTL 20120913)
ACPI: FACS 0x00000000DE02CC80 000040
ACPI: APIC 0x00000000DDB74748 00007E (v03 DELL CL09 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DDB747C8 000044 (v01 DELL CL09 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DDB74810 00009C (v01 DELL CL09 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DDB748B0 00003C (v01 DELL CL09 01072009 MSFT 00010013)
ACPI: SLIC 0x00000000DDB748F0 000176 (v01 DELL CL09 01072009 AMI 00010013)
ACPI: BOOT 0x00000000DDB74A68 000028 (v01 DELL CL09 01072009 AMI 00010013)
ACPI: HPET 0x00000000DDB74A90 000038 (v01 DELL CL09 01072009 AMI 00000005)
ACPI: UEFI 0x00000000DDB74AC8 000042 (v01 00000000 00000000)
ACPI: MSDM 0x00000000DDB74B10 000055 (v03 DELL CL09 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DDB74B68 0000D0 (v02 AMD AGESA 00000001 AMD 00000000)
ACPI: TPM2 0x00000000DDB74C38 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: SSDT 0x00000000DDB74C70 000854 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DDB754C8 00873A (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DDB7DC08 000528 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DDB7E130 00147F (v01 AMD CPMDFIGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DDB7F5B0 000692 (v01 AMD CPMADPS4 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DDB7FC48 0015F0 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000002feffffff]
NODE_DATA(0) allocated [mem 0x2feff6000-0x2feffafff]
[ffffea0000000000-ffffea000bffffff] PMD -> [ffff8802f2e00000-ffff8802fe5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x2feffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xdd052fff]
node 0: [mem 0xde3af000-0xde535fff]
node 0: [mem 0xdeb5f000-0xdf203fff]
node 0: [mem 0xdf7fa000-0xdf7fffff]
node 0: [mem 0x100000000-0x2feffffff]
Initmem setup node 0 [mem 0x00001000-0x2feffffff]
On node 0 totalpages: 3000354
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14115 pages used for memmap
DMA32 zone: 903301 pages, LIFO batch:31
Normal zone: 32704 pages used for memmap
Normal zone: 2093056 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd053000-0xddb51fff]
PM: Registered nosave memory: [mem 0xddb52000-0xddb81fff]
PM: Registered nosave memory: [mem 0xddb82000-0xde02dfff]
PM: Registered nosave memory: [mem 0xde02e000-0xde3aefff]
PM: Registered nosave memory: [mem 0xde536000-0xdeb5efff]
PM: Registered nosave memory: [mem 0xdf204000-0xdf7f9fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
PM: Registered nosave memory: [mem 0xfedc9000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff8802fec00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2953450
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Memory: 11644972K/12001416K available (7921K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 356444K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1796.744 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.48 BogoMIPS (lpj=7186976)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30026 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-8700P Radeon R6, 10 Compute Cores 4C+6G (fam: 15, model: 60, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14373.95 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xddb82000-0xde02dfff] (4898816 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 0:47:53, date: 12/12/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0U2] (off)
ACPI: Power Resource [P3U2] (off)
ACPI: Power Resource [P0U3] (off)
ACPI: Power Resource [P3U3] (off)
ACPI: Power Resource [P0SD] (off)
ACPI: Power Resource [P3SD] (off)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff]
pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xff700000-0xff73ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xff740000-0xff75ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xff764000-0xff767fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
pci 0000:00:03.1: [1022:157c] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0900000-0xf091ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xff400000-0xff4fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xff76f000-0xff76ffff]
pci 0000:00:08.0: reg 0x24: [mem 0xff76a000-0xff76bfff]
pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
pci 0000:00:09.2: reg 0x10: [mem 0xff760000-0xff763fff]
pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xff768000-0xff769fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xff76d000-0xff76d3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xff76c000-0xff76c0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xff600000-0xff600fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
pci 0000:00:02.2: bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xff500000-0xff57ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xff580000-0xff58ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:03.1: PCI bridge to [bus 03]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with AMD0020:01
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd053000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde536000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf204000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x2ff000000-0x2ffffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xc0000000-0xdfffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL06bd PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] could not be reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff800000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:03.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:03.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:03.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:03.1: BAR 14: assigned [mem 0xf0a00000-0xf0bfffff]
pci 0000:00:03.1: BAR 15: assigned [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci 0000:00:03.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
pci 0000:00:02.2: bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:03.1: PCI bridge to [bus 03]
pci 0000:00:03.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:03.1: bridge window [mem 0xf0a00000-0xf0bfffff]
pci 0000:00:03.1: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfed3ffff]
pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf0a00000-0xf0bfffff]
pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: no GSI
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PPR NX GT IA GA PC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Using passthrough domain for device 0000:00:01.0
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9053000-0xdd053000] (64MB) mapped at [ffff8800d9053000-ffff8800dd052fff]
Simple Boot Flag at 0x47 set to 0x1
perf: AMD NB counters detected
perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
microcode: CPU0: patch_level=0x06006110
microcode: CPU1: patch_level=0x06006110
microcode: CPU2: patch_level=0x06006110
microcode: CPU3: patch_level=0x06006110
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000007ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1449881273.680:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:03.1:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:03.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
mtrr: type mismatch for e0000000,800000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,400000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,200000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,100000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,80000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,40000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,20000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,10000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,8000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,4000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,2000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c80000, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-39-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-39-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: failed to peer usb2-port2 and usb1-port1 by location (usb2-port2:none) (usb1-port1:usb2-port1)
usb usb2-port2: failed to peer to usb1-port1 (-16)
usb: port power management may be unreliable
usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1)
usb usb2-port3: failed to peer to usb1-port1 (-16)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xff76c000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-39-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
ACPI: Battery Slot [BAT1] (battery present)
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: ebbc4f7d1a69d375881e66dfa532d0f61eac585e'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:171:759
rtc_cmos 00:03: setting system clock to 2015-12-12 00:47:54 UTC (1449881274)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[120]: starting version 204
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xff76d000 port 0xff76d100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xff76d000 port 0xff76d180 irq 19
r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc900019f6000, 20:47:47:ad:0b:ae, XID 04900000 IRQ 36
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0cf3, idProduct=e005
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: New USB device found, idVendor=0438, idProduct=7900
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 1-4: new high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, DD11, max UDMA/133
ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5LH DD11 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-4: New USB device found, idVendor=1bcf, idProduct=2b90
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Integrated_Webcam_HD
usb 1-4: Manufacturer: CNFEH43F30401789E572
usb 3-1.1: New USB device found, idVendor=0bda, idProduct=0129
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: USB2.0-CRW
usb 3-1.1: Manufacturer: Generic
usb 3-1.1: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
tsc: Refined TSC clocksource calibration: 1796.627 MHz
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648]
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00323/0x840300/0x12e800, board id: 3014, fw id: 1832337
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
random: init urandom read with 121 bits of entropy available
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (203) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (204) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (207) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (209) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (210) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (212) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (213) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (215) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 12000252k swap on /dev/sda5. Priority:-1 extents:1 across:12000252k FS
systemd-udevd[316]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i2c_designware: probe of AMD0010:00 failed with error -2
i2c_designware: probe of AMD0010:01 failed with error -2
MCE: In-kernel MCE decoding enabled.
AMD IOMMUv2 driver by Joerg Roedel
r8169 0000:01:00.0 eth1: renamed from eth0
systemd-udevd[421]: renamed network interface eth0 to eth1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
hidraw: raw HID events driver (C) Jiri Kosina
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
usbcore: registered new interface driver btusb
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90007400000, irq=37
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 11099 MBytes.
[fglrx] vendor: 1002 device: 9874 revision: c5 count: 1
[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[fglrx] ioport: bar 4, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
ath9k 0000:02:00.0 wlan1: renamed from wlan0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
systemd-udevd[428]: renamed network interface wlan0 to wlan1
input: Dell WMI hotkeys as /devices/virtual/input/input7
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Headset Mic=0x19
sound hdaudioC1D0: Headphone Mic=0x1a
sound hdaudioC1D0: Internal Mic=0x12
usb 1-1: USB disconnect, device number 2
usbcore: registered new interface driver ath3k
usb 1-1: new full-speed USB device number 4 using xhci_hcd
usb 1-1: New USB device found, idVendor=0cf3, idProduct=e005
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
media: Linux media interface: v0.10
input: HD-Audio Generic Headphone Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input9
Linux video capture interface: v2.00
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
audit: type=1400 audit(1449881288.916:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=453 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=453 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=453 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=532 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=453 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=453 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
audit: type=1400 audit(1449881288.916:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b90)
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:10.0/usb1/1-4/1-4:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
init: avahi-cups-reload main process (682) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: failsafe main process (582) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1449881294.504:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1449881294.504:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1449881294.504:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1449881294.504:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1449881294.504:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1449881294.504:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=827 comm="apparmor_parser"
audit: type=1400 audit(1449881294.792:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=831 comm="apparmor_parser"
audit: type=1400 audit(1449881294.796:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=832 comm="apparmor_parser"
audit: type=1400 audit(1449881294.796:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=832 comm="apparmor_parser"
audit: type=1400 audit(1449881294.796:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=832 comm="apparmor_parser"
init: smbd main process (604) killed by HUP signal
init: smbd main process ended, respawning
r8169 0000:01:00.0 eth1: link down
r8169 0000:01:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
r8169 0000:01:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: samba-ad-dc main process (957) terminated with status 1
[fglrx] Firegl kernel thread PID: 1398
[fglrx] Firegl kernel thread PID: 1399
[fglrx] Firegl kernel thread PID: 1400
[fglrx] IRQ 42 Enabled
[fglrx] fglrx enable the IOMMUv2 support.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f97a000, size:1000
[fglrx] Reserved FB block: Unshared offset:f97b000, size:4000
[fglrx] Reserved FB block: Unshared offset:f97f000, size:581000
[fglrx] Reserved FB block: Unshared offset:ff00000, size:100000
[fglrx] Reserved FB block: Unshared offset:1ff6c000, size:94000
[fglrx] ATIF platform detected with notification ID: 0x81
[Firmware Bug]: battery: (dis)charge rate invalid.