dmesg - hradec-zfs-no-ssd
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bf678fff] usable
BIOS-e820: [mem 0x00000000bf679000-0x00000000bf68efff] reserved
BIOS-e820: [mem 0x00000000bf68f000-0x00000000bf6cdfff] ACPI data
BIOS-e820: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000093fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge R610/08GXHX, BIOS 2.1.9 05/27/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x940000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 0100000000 mask FF00000000 write-back
3 base 0200000000 mask FE00000000 write-back
4 base 0400000000 mask FC00000000 write-back
5 base 0800000000 mask FE00000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf679 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b36000, 0x01b36fff] PGTABLE
BRK [0x01b37000, 0x01b37fff] PGTABLE
BRK [0x01b38000, 0x01b38fff] PGTABLE
init_memory_mapping: [mem 0x93fe00000-0x93fffffff]
[mem 0x93fe00000-0x93fffffff] page 2M
BRK [0x01b39000, 0x01b39fff] PGTABLE
init_memory_mapping: [mem 0x920000000-0x93fdfffff]
[mem 0x920000000-0x93fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf678fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf678fff] page 4k
init_memory_mapping: [mem 0x100000000-0x91fffffff]
[mem 0x100000000-0x91fffffff] page 2M
BRK [0x01b3a000, 0x01b3afff] PGTABLE
BRK [0x01b3b000, 0x01b3bfff] PGTABLE
RAMDISK: [mem 0x37678000-0x37b33fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0A90 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F0B94 00009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x00000000BF6B3F9C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x00000000BF68F000 003D5A (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 0x00000000BF6B6000 000040
ACPI: FACS 0x00000000BF6B6000 000040
ACPI: APIC 0x00000000BF6B3478 00015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x00000000BF6B35D8 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x00000000BF6B362C 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 0x00000000BF6B3668 0001A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x00000000BF6B38C4 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WDAT 0x00000000BF6B3904 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x00000000BF6B3A3C 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x00000000BF692EDC 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x00000000BF69314C 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x00000000BF692D5C 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x00000000BF692D8C 000150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 0x00000000BF6B3BC0 000370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x00000000BF6B3F34 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 0x00000000BF6B7000 004604 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x10 -> Node 0
SRAT: PXM 2 -> APIC 0x00 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 0
SRAT: PXM 2 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 0
SRAT: PXM 2 -> APIC 0x04 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 0
SRAT: PXM 2 -> APIC 0x06 -> Node 1
SRAT: PXM 1 -> APIC 0x11 -> Node 0
SRAT: PXM 2 -> APIC 0x01 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 0
SRAT: PXM 2 -> APIC 0x03 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 0
SRAT: PXM 2 -> APIC 0x05 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 0
SRAT: PXM 2 -> APIC 0x07 -> Node 1
SRAT: Node 1 PXM 2 [mem 0x00000000-0xbfffffff]
SRAT: Node 1 PXM 2 [mem 0x100000000-0x4bfffffff]
SRAT: Node 0 PXM 1 [mem 0x4c0000000-0x93fffffff]
NUMA: Node 1 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x93ffdb000-0x93ffdefff]
NODE_DATA(1) allocated [mem 0x4bfffc000-0x4bfffffff]
[ffffea0000000000-ffffea0012ffffff] PMD -> [ffff8804ade00000-ffff8804bfdfffff] on node 1
[ffffea0013000000-ffffea0024ffffff] PMD -> [ffff88092d600000-ffff88093f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000093fffffff]
Movable zone start for each node
Early memory node ranges
node 1: [mem 0x0000000000001000-0x000000000009ffff]
node 1: [mem 0x0000000000100000-0x00000000bf678fff]
node 1: [mem 0x0000000100000000-0x00000004bfffffff]
node 0: [mem 0x00000004c0000000-0x000000093fffffff]
Initmem setup node 0 [mem 0x00000004c0000000-0x000000093fffffff]
On node 0 totalpages: 4718592
Normal zone: 73728 pages used for memmap
Normal zone: 4718592 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000000001000-0x00000004bfffffff]
On node 1 totalpages: 4716056
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12186 pages used for memmap
DMA32 zone: 779897 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf679000-0xbf68efff]
PM: Registered nosave memory: [mem 0xbf68f000-0xbf6cdfff]
PM: Registered nosave memory: [mem 0xbf6ce000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 32 pages/cpu @ffff8804adc00000 s91480 r8192 d31400 u131072
pcpu-alloc: s91480 r8192 d31400 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Node order, mobility grouping on. Total pages: 9287205
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 37061644K/37738592K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 676948K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
NR_IRQS:8448 nr_irqs:1224 16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2527.239 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5056.08 BogoMIPS (lpj=8424130)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
ftrace: allocating 22161 entries in 87 pages
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #1, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #2
.... node #1, CPUs: #3
.... node #0, CPUs: #4
.... node #1, CPUs: #5
.... node #0, CPUs: #6
.... node #1, CPUs: #7
.... node #0, CPUs: #8
.... node #1, CPUs: #9
.... node #0, CPUs: #10
.... node #1, CPUs: #11
.... node #0, CPUs: #12
.... node #1, CPUs: #13
.... node #0, CPUs: #14
.... node #1, CPUs: #15
x86: Booted up 2 nodes, 16 CPUs
smpboot: Total of 16 processors activated (80899.21 BogoMIPS)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 20:52:35, date: 11/29/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0xdf0e0000-0xdf0e3fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0xdf0e4000-0xdf0e7fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0xdf0e8000-0xdf0ebfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0xdf0ec000-0xdf0effff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0xdf0f0000-0xdf0f3fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0xdf0f4000-0xdf0f7fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0xdf0f8000-0xdf0fbfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0xdf0fc000-0xdf0fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xcc40-0xcc5f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xcc60-0xcc7f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xdf0df800-0xdf0dfbff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xcc80-0xcc9f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xcca0-0xccbf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xdf0dfc00-0xdf0dffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xcc10-0xcc17]
pci 0000:00:1f.2: reg 0x14: [io 0xcc08-0xcc0b]
pci 0000:00:1f.2: reg 0x18: [io 0xcc18-0xcc1f]
pci 0000:00:1f.2: reg 0x1c: [io 0xcc0c-0xcc0f]
pci 0000:00:1f.2: reg 0x20: [io 0xcc20-0xcc2f]
pci 0000:00:1f.2: reg 0x24: [io 0xcc30-0xcc3f]
pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xecd0-0xecd7]
pci 0000:04:00.0: reg 0x14: [io 0xecc8-0xeccb]
pci 0000:04:00.0: reg 0x18: [io 0xecd8-0xecdf]
pci 0000:04:00.0: reg 0x1c: [io 0xeccc-0xeccf]
pci 0000:04:00.0: reg 0x20: [io 0xece0-0xecff]
pci 0000:04:00.0: reg 0x24: [mem 0xdf1ffe00-0xdf1fffff]
pci 0000:04:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:05:00.0: [1077:2432] type 00 class 0x0c0400
pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff]
pci 0000:05:00.0: reg 0x14: [mem 0xdf2f8000-0xdf2fbfff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xdf200000-0xdf23ffff pref]
pci 0000:05:00.1: [1077:2432] type 00 class 0x0c0400
pci 0000:05:00.1: reg 0x10: [io 0xdc00-0xdcff]
pci 0000:05:00.1: reg 0x14: [mem 0xdf2fc000-0xdf2fffff 64bit]
pci 0000:05:00.1: reg 0x30: [mem 0xdf200000-0xdf23ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:03:00.0: [1000:0058] type 00 class 0x010000
pci 0000:03:00.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:03:00.0: reg 0x14: [mem 0xdf4ec000-0xdf4effff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0xdf4f0000-0xdf4fffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xdf300000-0xdf3fffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf4fffff]
pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
pci 0000:06:03.0: reg 0x10: [mem 0xd5800000-0xd5ffffff pref]
pci 0000:06:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
pci 0000:06:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
pci 0000:06:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:06:03.0
vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:03.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbf679000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x0800-0x087f] could not be reserved
system 00:04: [io 0x0880-0x08ff] could not be reserved
system 00:04: [io 0x0900-0x091f] has been reserved
system 00:04: [io 0x0920-0x0923] has been reserved
system 00:04: [io 0x0924] has been reserved
system 00:04: [io 0x0c00-0x0c7f] has been reserved
system 00:04: [io 0x0ca0-0x0ca7] has been reserved
system 00:04: [io 0x0ca9-0x0cab] has been reserved
system 00:04: [io 0x0cad-0x0caf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:05: [irq 0 disabled]
system 00:05: [io 0x0ca8] has been reserved
system 00:05: [io 0x0cac] has been reserved
system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed90000-0xfed91fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:05:00.1: can't claim BAR 6 [mem 0xdf200000-0xdf23ffff pref]: address conflict with 0000:05:00.0 [mem 0xdf200000-0xdf23ffff pref]
pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:05:00.1: BAR 6: assigned [mem 0xdf240000-0xdf27ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.0: bridge window [mem 0xdf300000-0xdf4fffff]
pci 0000:06:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xdf300000-0xdf4fffff]
pci_bus 0000:06: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:06: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfdffffff window]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:06:03.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4848K (ffff880037678000 - ffff880037b34000)
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x000000bf7c8000 end: 0x000000bf7dffff
DMAR: RMRR base: 0x000000bf7b1000 end: 0x000000bf7bffff
DMAR: RMRR base: 0x000000bf7a1000 end: 0x000000bf7a1fff
DMAR: RMRR base: 0x000000bf7a3000 end: 0x000000bf7a3fff
DMAR: RMRR base: 0x000000bf7a5000 end: 0x000000bf7a5fff
DMAR: RMRR base: 0x000000bf7a7000 end: 0x000000bf7a7fff
DMAR: RMRR base: 0x000000bf7c0000 end: 0x000000bf7c0fff
DMAR: RMRR base: 0x000000bf7c2000 end: 0x000000bf7c2fff
DMAR: ATSR flags: 0x0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb679000-0xbf679000] (64MB) mapped at [ffff8800bb679000-ffff8800bf678fff]
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU8 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU9 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU10 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU11 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU12 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU13 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU14 sig=0x106a5, pf=0x1, revision=0x11
microcode: CPU15 sig=0x106a5, pf=0x1, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Magic number: 7:672:903
rtc_cmos 00:01: setting system clock to 2015-11-29 20:52:35 UTC (1448830355)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
random: systemd-tmpfile urandom read with 2 bits of entropy available
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Fusion MPT SAS Host driver 3.04.20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci: EHCI PCI platform driver
mptbase: ioc0: Initiating bringup
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host0: ahci
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.18-k.
scsi host1: ahci
qla2xxx [0000:05:00.0]-001d: : Found an ISP2432 irq 32 iobase 0xffffc9000624e000.
ata1: SATA max UDMA/133 abar m512@0xdf1ffe00 port 0xdf1fff00 irq 31
ata2: SATA max UDMA/133 abar m512@0xdf1ffe00 port 0xdf1fff80 irq 31
scsi host3: ata_piix
scsi host4: ata_piix
ata3: SATA max UDMA/133 cmd 0xcc10 ctl 0xcc08 bmdma 0xcc20 irq 23
ata4: SATA max UDMA/133 cmd 0xcc18 ctl 0xcc0c bmdma 0xcc28 irq 23
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000cc40
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000cc60
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cc80
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0df800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0dfc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
scsi host2: qla2xxx
qla2xxx [0000:05:00.0]-00fb:2: QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA.
qla2xxx [0000:05:00.0]-00fc:2: ISP2432: PCIe (2.5GT/s x4) @ 0000:05:00.0 hdma+ host#=2 fw=7.03.00 (9496).
qla2xxx [0000:05:00.1]-001d: : Found an ISP2432 irq 35 iobase 0xffffc90006a0c000.
usb 5-3: new high-speed USB device number 2 using ehci-pci
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 3 ports detected
ioc0: LSISAS1068E B3: Capabilities={Initiator}
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
ata3.00: configured for UDMA/100
scsi host5: qla2xxx
qla2xxx [0000:05:00.1]-00fb:5: QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA.
qla2xxx [0000:05:00.1]-00fc:5: ISP2432: PCIe (2.5GT/s x4) @ 0000:05:00.1 hdma+ host#=5 fw=7.03.00 (9496).
tsc: Refined TSC clocksource calibration: 2526.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns
ata4: failed to resume link (SControl 0)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.15: Port Multiplier 1.2, 0x197b:0x575f r0, 15 ports, feat 0x5/0xf
ata1.00: hard resetting link
ata4: SATA link down (SStatus 4 SControl 0)
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: hard resetting link
clocksource: Switched to clocksource tsc
ata1.01: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.02: hard resetting link
ata1.02: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.03: hard resetting link
ata1.03: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link down (SStatus 0 SControl 330)
ata1.05: hard resetting link
ata1.05: SATA link down (SStatus 0 SControl 330)
ata1.06: hard resetting link
ata1.06: SATA link down (SStatus 0 SControl 330)
ata1.07: hard resetting link
ata1.07: SATA link down (SStatus 0 SControl 330)
ata1.08: hard resetting link
ata1.08: SATA link down (SStatus 0 SControl 330)
ata1.09: hard resetting link
ata1.09: SATA link down (SStatus 0 SControl 330)
ata1.10: hard resetting link
ata1.10: SATA link down (SStatus 0 SControl 330)
ata1.11: hard resetting link
ata1.11: SATA link down (SStatus 0 SControl 330)
ata1.12: hard resetting link
ata1.12: SATA link down (SStatus 0 SControl 330)
ata1.13: hard resetting link
ata1.13: SATA link down (SStatus 0 SControl 330)
ata1.14: hard resetting link
ata1.14: SATA link down (SStatus 0 SControl 330)
ata1.00: ATA-8: KINGSTON SV300S37A240G, 603ABBF0, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata1.01: ATA-9: ST4000DX001-1CE168, CC45, max UDMA/133
ata1.01: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.01: configured for UDMA/133
ata1.02: ATA-9: ST4000DX001-1CE168, CC45, max UDMA/133
ata1.02: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.02: configured for UDMA/133
ata1.03: ATA-9: ST4000DX001-1CE168, CC45, max UDMA/133
ata1.03: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.03: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
scsi 0:1:0:0: Direct-Access ATA ST4000DX001-1CE1 CC45 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access ATA ST4000DX001-1CE1 CC45 PQ: 0 ANSI: 5
scsi 0:3:0:0: Direct-Access ATA ST4000DX001-1CE1 CC45 PQ: 0 ANSI: 5
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.15: Port Multiplier 1.2, 0x197b:0x575f r0, 15 ports, feat 0x5/0xf
ata2.00: hard resetting link
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.01: hard resetting link
ata2.01: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.02: hard resetting link
ata2.02: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.03: hard resetting link
ata2.03: SATA link down (SStatus 0 SControl 330)
ata2.04: hard resetting link
ata2.04: SATA link down (SStatus 0 SControl 330)
ata2.05: hard resetting link
ata2.05: SATA link down (SStatus 0 SControl 330)
ata2.06: hard resetting link
ata2.06: SATA link down (SStatus 0 SControl 330)
ata2.07: hard resetting link
ata2.07: SATA link down (SStatus 0 SControl 330)
ata2.08: hard resetting link
ata2.08: SATA link down (SStatus 0 SControl 330)
ata2.09: hard resetting link
ata2.09: SATA link down (SStatus 0 SControl 330)
ata2.10: hard resetting link
ata2.10: SATA link down (SStatus 0 SControl 330)
ata2.11: hard resetting link
ata2.11: SATA link down (SStatus 0 SControl 330)
ata2.12: hard resetting link
ata2.12: SATA link down (SStatus 0 SControl 330)
ata2.13: hard resetting link
ata2.13: SATA link down (SStatus 0 SControl 330)
ata2.14: hard resetting link
ata2.14: SATA link down (SStatus 0 SControl 330)
ata2.00: ATA-9: ST4000DX001-1CE168, CC45, max UDMA/133
ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata2.01: ATA-9: ST4000DX001-1CE168, CC45, max UDMA/133
ata2.01: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.01: configured for UDMA/133
ata2.02: ATA-9: ST4000DX001-1CE168, CC45, max UDMA/133
ata2.02: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.02: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA ST4000DX001-1CE1 CC45 PQ: 0 ANSI: 5
scsi 1:1:0:0: Direct-Access ATA ST4000DX001-1CE1 CC45 PQ: 0 ANSI: 5
scsi 1:2:0:0: Direct-Access ATA ST4000DX001-1CE1 CC45 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:1:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 0:1:0:0: [sdb] 4096-byte physical blocks
sd 0:2:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 0:2:0:0: [sdc] 4096-byte physical blocks
sd 0:3:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 0:3:0:0: [sdd] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:2:0:0: [sdc] Write Protect is off
sd 0:2:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:3:0:0: [sdd] Write Protect is off
sd 0:3:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 0:1:0:0: [sdb] Write Protect is off
sd 0:1:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:0:0:0: [sde] 4096-byte physical blocks
sd 1:1:0:0: [sdf] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:1:0:0: [sdf] 4096-byte physical blocks
sd 1:1:0:0: [sdf] Write Protect is off
sd 1:1:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sde] Write Protect is off
sd 1:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdg] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:2:0:0: [sdg] 4096-byte physical blocks
sd 1:2:0:0: [sdg] Write Protect is off
sd 1:2:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:2:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1 sdf9
sdg: sdg1 sdg9
sd 1:1:0:0: [sdf] Attached SCSI disk
sde: sde1 sde9
sd 1:2:0:0: [sdg] Attached SCSI disk
sd 1:0:0:0: [sde] Attached SCSI disk
random: nonblocking pool is initialized
sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sdd: sdd1 sdd9
sdb: sdb1 sdb9
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:3:0:0: [sdd] Attached SCSI disk
sd 0:1:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc9
sd 0:2:0:0: [sdc] Attached SCSI disk
qla2xxx [0000:05:00.0]-8038:2: Cable is unplugged...
qla2xxx [0000:05:00.1]-8038:5: Cable is unplugged...
scsi host6: ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 9, phy 2, sas_addr 0x5000c5000c7918d5
scsi 6:0:0:0: Direct-Access HP DG146BB976 HPDC PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c5000376fae5
scsi 6:0:1:0: Direct-Access HP DG146ABAB4 HPD7 PQ: 0 ANSI: 5
mptsas: ioc0: attaching raid volume, channel 1, id 2
scsi 6:1:2:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
sd 6:1:2:0: [sdh] 285474816 512-byte logical blocks: (146 GB/136 GiB)
sd 6:1:2:0: [sdh] Write Protect is off
sd 6:1:2:0: [sdh] Mode Sense: 03 00 00 08
sd 6:1:2:0: [sdh] No Caching mode page found
sd 6:1:2:0: [sdh] Assuming drive cache: write through
sdh: sdh1 sdh2 sdh3
sd 6:1:2:0: [sdh] Attached SCSI disk
raid6: sse2x1 gen() 6862 MB/s
raid6: sse2x1 xor() 5376 MB/s
raid6: sse2x2 gen() 8121 MB/s
raid6: sse2x2 xor() 6338 MB/s
raid6: sse2x4 gen() 9341 MB/s
raid6: sse2x4 xor() 7054 MB/s
raid6: using algorithm sse2x4 gen() 9341 MB/s
raid6: .... xor() 7054 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 11754.000 MB/sec
generic_sse: 10348.800 MB/sec
xor: using function: prefetch64-sse (11754.000 MB/sec)
Btrfs loaded
BTRFS: device label Arch Linux devid 1 transid 45613 /dev/sdh3
BTRFS info (device sdh3): disk space caching is enabled
BTRFS: has skinny extents
ip_tables: (C) 2000-2006 Netfilter Core Team
ERST: NVRAM ERST Log Address Range not implemented yet.
systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/usr/lib/systemd/system/rc-local.service:18] Support for option SysVStartPriority= has been removed and it is ignored
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Created slice system-netctl.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Reached target RPC Port Mapper.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Host and Network Name Lookups.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
FS-Cache: Loaded
systemd[1]: Reached target Paths.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Temporary Directory.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:1:0:0: Attached scsi generic sg1 type 0
sd 0:2:0:0: Attached scsi generic sg2 type 0
sd 0:3:0:0: Attached scsi generic sg3 type 0
sd 1:0:0:0: Attached scsi generic sg4 type 0
sd 1:1:0:0: Attached scsi generic sg5 type 0
sd 1:2:0:0: Attached scsi generic sg6 type 0
sr 3:0:0:0: Attached scsi generic sg7 type 5
scsi 6:0:0:0: Attached scsi generic sg8 type 0
scsi 6:0:1:0: Attached scsi generic sg9 type 0
sd 6:1:2:0: Attached scsi generic sg10 type 0
zavl: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
SPL: Loaded module v0.6.5.3-1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Mounted NFSD configuration filesystem.
BTRFS info (device sdh3): use ssd allocation scheme
BTRFS info (device sdh3): turning on discard
BTRFS info (device sdh3): disk space caching is enabled
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create Static Device Nodes in /dev...
ZFS: Loaded module v0.6.5.3-1, ZFS pool version 5000, ZFS filesystem version 5
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Configuration File System...
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
systemd-journald[310]: Received request to flush runtime journal from PID 1
dca service started, version 1.12.1
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20150619/exfield-418)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88092d098b18), AE_AML_BUFFER_LIMIT (20150619/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88092d098a78), AE_AML_BUFFER_LIMIT (20150619/psparse-536)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20150619/power_meter-755)
input: PC Speaker as /devices/platform/pcspkr/input/input3
ioatdma: Intel(R) QuickData Technology Driver 4.00
bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 49, node addr 84:2b:2b:fe:64:9a
bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 50, node addr 84:2b:2b:fe:64:9c
bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 51, node addr 84:2b:2b:fe:64:9e
bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 52, node addr 84:2b:2b:fe:64:a0
[drm] Initialized drm 1.1.0 20060810
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
bnx2 0000:01:00.0 eno1: renamed from eth0
bnx2 0000:02:00.0 eno3: renamed from eth2
bnx2 0000:01:00.1 eno2: renamed from eth1
bnx2 0000:02:00.1 eno4: renamed from eth3
iTCO_vendor_support: vendor-support=0
gpio_ich: GPIO from 451 to 511 on gpio_ich
[TTM] Zone kernel: Available graphics memory: 18534246 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
ipmi message handler version 39.2
fbcon: mgadrmfb (fb0) is primary device
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
CE: hpet increased min_delta_ns to 20115 nsec
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Console: switching to colour frame buffer device 128x48
mgag200 0000:06:03.0: fb0: mgadrmfb frame buffer device
mgag200 0000:06:03.0: registered panic notifier
[drm] Initialized mgag200 1.0.0 20110418 for 0000:06:03.0 on minor 0
ipmi device interface
Adding 33554428k swap on /dev/sdh2. Priority:-1 extents:1 across:33554428k FS
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
IPMI SSIF Interface driver
SPL: using hostid 0xa8c0120a
bnx2 0000:01:00.0 eno1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
bnx2 0000:01:00.0 eno1: NIC Copper Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
CE: hpet increased min_delta_ns to 30172 nsec
CE: hpet increased min_delta_ns to 45258 nsec
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
NFSD: starting 90-second grace period (net ffffffff818aedc0)
perf interrupt took too long (2522 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
perf interrupt took too long (5340 > 4960), lowering kernel.perf_event_max_sample_rate to 25200
perf interrupt took too long (9999 > 9920), lowering kernel.perf_event_max_sample_rate to 12600