dmesg - 33
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-573.8.1.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC) ) #1 SMP Tue Nov 10 18:01:38 UTC 2015
Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=ko rd_LVM_LV=VolGroup/lv_root rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000bfaa0000 (usable)
BIOS-e820: 00000000bfaa0000 - 00000000bfab6000 (reserved)
BIOS-e820: 00000000bfab6000 - 00000000bfad5c00 (ACPI data)
BIOS-e820: 00000000bfad5c00 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI 2.5 present.
SMBIOS version 2.5 @ 0xFC940
DMI: Dell Inc. PowerEdge T300/0TY177, BIOS 1.5.2 11/02/2010
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x440000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 1GB, type WB
reg 5, base: 3068MB, range: 4MB, type UC
total RAM covered: 16380M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3068MB, range: 4MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 1GB, type WB
e820 update range: 00000000bfc00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfaa0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfaa0000
0000000000 - 00bfa00000 page 2M
00bfa00000 - 00bfaa0000 page 4k
kernel direct mapping tables up to bfaa0000 @ 8000-d000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000440000000
0100000000 - 0440000000 page 2M
kernel direct mapping tables up to 440000000 @ b000-19000
RAMDISK: 36545000 - 37fef6a3
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 00000000000f23d0 00024 (v02 DELL )
ACPI: XSDT 00000000000f245c 000AC (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bfad34f8 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bfab6000 03E0D (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000bfad5c00 00040
ACPI: APIC 00000000bfad3078 0008A (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bfad3104 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bfad3158 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bfad3194 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bfad31d4 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bfad330c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bfabbb88 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bfabbd98 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bfabba08 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bfabba38 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bfad3490 00064 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000bfab9e0d 00454 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfaba4b3 00454 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfabab59 00454 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfabb1ff 00454 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000bfabb8a5 00162 (v01 DELL PE_SC3 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
NODE_DATA [0000000000018000 - 000000000004bfff]
bootmap [0000000000100000 - 0000000000187fff] pages 88
(8 early reservations) ==> bootmem [0000000000 - 0440000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000203cb64] TEXT DATA BSS ==> [0001000000 - 000203cb64]
#3 [0036545000 - 0037fef6a3] RAMDISK ==> [0036545000 - 0037fef6a3]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000203d000 - 000203d47d] BRK ==> [000203d000 - 000203d47d]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 0000018000] PGTABLE ==> [000000b000 - 0000018000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 17408MB)
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff8800363fffff] on node 0
[ffffea000ec00000-ffffea000edfffff] PMD -> [ffff880038000000-ffff8800381fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00440000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x000bfaa0
0: 0x00100000 -> 0x00440000
On node 0 totalpages: 4192831
DMA zone: 56 pages used for memmap
DMA zone: 116 pages reserved
DMA zone: 3827 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 766680 pages, LIFO batch:31
Normal zone: 46592 pages used for memmap
Normal zone: 3361280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[256])
IOAPIC[1]: apic_id 5, version 32, address 0xfec10000, GSI 256-279
ACPI: IOAPIC (id[0x06] address[0xfec10000] gsi_base[64])
IOAPIC[2]: apic_id 6, version 32, address 0xfec10000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 280
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfaa0000 - 00000000bfab6000
PM: Registered nosave memory: 00000000bfab6000 - 00000000bfad5000
PM: Registered nosave memory: 00000000bfad5000 - 00000000bfad6000
PM: Registered nosave memory: 00000000bfad6000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91224 r8192 d23464 u524288
pcpu-alloc: s91224 r8192 d23464 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4131787
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=ko rd_LVM_LV=VolGroup/lv_root rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Memory: 16299836k/17825792k available (5395k kernel code, 1054468k absent, 471488k reserved, 7013k data, 1296k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1024
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2833.296 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.59 BogoMIPS (lpj=2833296)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22128 entries in 87 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU X3363 @ 2.83GHz stepping 0a
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (22666.36 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88043a0bdbf0), AE_NOT_FOUND
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfdffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xcc80-0xcc9f]
pci 0000:00:1d.1: reg 20: [io 0xcca0-0xccbf]
pci 0000:00:1d.2: reg 20: [io 0xccc0-0xccdf]
pci 0000:00:1d.3: reg 20: [io 0xcce0-0xccff]
pci 0000:00:1d.7: reg 10: [mem 0xdfbffc00-0xdfbfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
pci 0000:00:1f.2: reg 10: [io 0xcc20-0xcc27]
pci 0000:00:1f.2: reg 14: [io 0xcc10-0xcc13]
pci 0000:00:1f.2: reg 18: [io 0xcc28-0xcc2f]
pci 0000:00:1f.2: reg 1c: [io 0xcc14-0xcc17]
pci 0000:00:1f.2: reg 20: [io 0xcc40-0xcc4f]
pci 0000:00:1f.2: reg 24: [io 0xcc50-0xcc5f]
pci 0000:00:1f.5: reg 10: [io 0xcc30-0xcc37]
pci 0000:00:1f.5: reg 14: [io 0xcc18-0xcc1b]
pci 0000:00:1f.5: reg 18: [io 0xcc38-0xcc3f]
pci 0000:00:1f.5: reg 1c: [io 0xcc1c-0xcc1f]
pci 0000:00:1f.5: reg 20: [io 0xcc60-0xcc6f]
pci 0000:00:1f.5: reg 24: [io 0xcc70-0xcc7f]
pci 0000:03:00.0: reg 10: [mem 0xdfc80000-0xdfcbffff 64bit]
pci 0000:03:00.0: reg 18: [io 0xec00-0xecff]
pci 0000:03:00.0: reg 1c: [mem 0xdfcc0000-0xdfcfffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xdfc00000-0xdfc07fff pref]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:04.0: PCI bridge to [bus 05-05]
pci 0000:00:05.0: PCI bridge to [bus 06-06]
pci 0000:00:06.0: PCI bridge to [bus 07-07]
pci 0000:00:07.0: PCI bridge to [bus 08-08]
pci 0000:09:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 09-0a]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:01:00.0: reg 10: [mem 0xdfdf0000-0xdfdfffff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 01-01]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:02:00.0: reg 10: [mem 0xdfef0000-0xdfefffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:0b:07.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:0b:07.0: reg 14: [io 0xdc00-0xdcff]
pci 0000:0b:07.0: reg 18: [mem 0xdfff0000-0xdfffffff]
pci 0000:0b:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0b:07.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:0b:07.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:07.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x02f8-0x02ff]
pnp 00:07: [irq 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0880-0x08bf]
pnp 00:08: [io 0x08c0-0x08df]
pnp 00:08: [io 0x08e0-0x08e3]
pnp 00:08: [io 0x0900]
pnp 00:08: [io 0x0c00-0x0c0f]
pnp 00:08: [io 0x0c10-0x0c1f]
pnp 00:08: [io 0x0ca0-0x0ca7]
pnp 00:08: [io 0x0ca9-0x0cab]
pnp 00:08: [io 0x0cad-0x0caf]
pnp 00:08: [io 0x0c20-0x0c3f]
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io 0x0ca8]
pnp 00:09: [io 0x0cac]
pnp 00:09: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0880-0x08bf] has been reserved
system 00:08: [io 0x08c0-0x08df] has been reserved
system 00:08: [io 0x08e0-0x08e3] has been reserved
system 00:08: [io 0x0900] has been reserved
system 00:08: [io 0x0c00-0x0c0f] has been reserved
system 00:08: [io 0x0c10-0x0c1f] has been reserved
system 00:08: [io 0x0ca0-0x0ca7] has been reserved
system 00:08: [io 0x0ca9-0x0cab] has been reserved
system 00:08: [io 0x0cad-0x0caf] has been reserved
system 00:08: [io 0x0c20-0x0c3f] has been reserved
system 00:09: [io 0x0ca8] has been reserved
system 00:09: [io 0x0cac] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
pci 0000:00:02.0: PCI bridge to [bus 03-03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:04.0: PCI bridge to [bus 05-05]
pci 0000:00:05.0: PCI bridge to [bus 06-06]
pci 0000:00:06.0: PCI bridge to [bus 07-07]
pci 0000:00:07.0: PCI bridge to [bus 08-08]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.0: PCI bridge to [bus 09-0a]
pci 0000:00:1c.4: PCI bridge to [bus 01-01]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:0b:07.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0b: resource 1 [mem 0xdff00000-0xdfffffff]
pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xfdffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:09:00.0: rerouting interrupts for [8086:032c]
pci 0000:0b:07.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27305k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1448654124.577:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31888
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 961ACC1AB0E84160
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 280 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:02.0: irq 280 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 281 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 281 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
alloc irq_desc for 282 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:04.0: irq 282 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
alloc irq_desc for 283 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:05.0: irq 283 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
alloc irq_desc for 284 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:06.0: irq 284 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 285 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 285 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 286 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 286 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 287 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 287 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 288 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 288 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Marking TSC unstable due to TSC halts in idle
[Firmware Bug]: No valid trip found
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdfbffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-573.8.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cc80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-573.8.1.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-573.8.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ccc0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-573.8.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cce0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-573.8.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2015-11-27 19:55:26 UTC (1448654126)
Initalizing network drop monitor service
Freeing unused kernel memory: 1296k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 728k freed
Freeing unused kernel memory: 1572k freed
dracut: dracut-004-388.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
radeon 0000:0b:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x0210).
[drm] register mmio base: 0xDFFF0000
[drm] register mmio size: 65536
radeon 0000:0b:07.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (32M used)
radeon 0000:0b:07.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 8165370 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000037880000).
radeon 0000:0b:07.0: WB disabled
radeon 0000:0b:07.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff880037824000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
radeon 0000:0b:07.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 1310720
[drm] fb depth is 8
[drm] pitch is 1280
fbcon: radeondrmfb (fb0) is primary device
usb 1-7: new high speed USB device number 4 using ehci_hcd
Console: switching to colour frame buffer device 160x64
Switching to clocksource tsc
radeon 0000:0b:07.0: fb0: radeondrmfb frame buffer device
radeon 0000:0b:07.0: registered panic notifier
[drm] Initialized radeon 2.40.0 20080528 for 0000:0b:07.0 on minor 0
dracut: Starting plymouth daemon
usb 1-7: New USB device found, idVendor=04b4, idProduct=6560
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-7: configuration #1 chosen from 1 choice
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 2 ports detected
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
megasas: 06.806.08.00-rh3 Thu. Sep. 4 17:00:00 PDT 2014
megasas: 0x1000:0x0060:0x1028:0x1f0b: bus 3:slot 0:func 0
megaraid_sas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
megaraid_sas 0000:03:00.0: setting latency timer to 64
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
usb 3-1: new low speed USB device number 2 using uhci_hcd
megaraid_sas 0000:03:00.0: Controller type: MR,Memory size is: 256MB
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi0 : LSI SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access DELL PERC 6/i Adapter 1.21 PQ: 0 ANSI: 5
scsi 0:2:1:0: Direct-Access DELL PERC 6/i Adapter 1.21 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 3-1: New USB device found, idVendor=0461, idProduct=4d20
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:0461:4D20.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xcc20 ctl 0xcc10 bmdma 0xcc40 irq 23
ata2: SATA max UDMA/133 cmd 0xcc28 ctl 0xcc14 bmdma 0xcc48 irq 23
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Switching to clocksource hpet
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0xcc30 ctl 0xcc18 bmdma 0xcc60 irq 22
ata4: SATA max UDMA/133 cmd 0xcc38 ctl 0xcc1c bmdma 0xcc68 irq 22
usb 3-2: new low speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=0461, idProduct=0010
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer: NOVATEK
usb 3-2: configuration #1 chosen from 1 choice
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
generic-usb 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input0
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4
generic-usb 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input1
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653F, D300, max UDMA/100
ata3.00: applying bridge limits
ata3.00: configured for UDMA/100
ata2.00: failed to resume link (SControl 0)
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 1 SControl 0)
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653F D300 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 0:2:1:0: [sdb] 584843264 512-byte logical blocks: (299 GB/278 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:1:0: [sdb] Write Protect is off
sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:2:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
sdb: sda1 sda2
sdb1
sd 0:2:0:0: [sda] Attached SCSI disk
sd 0:2:1:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda2 sdb1 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_home' [499.40 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [7.85 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
dracut: Loading SELinux policy
type=1404 audit(1448654130.087:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 305193 rules.
SELinux: 2048 avtab hash slots, 305193 rules.
SELinux: 9 users, 12 roles, 4199 types, 234 bools, 1 sens, 1024 cats
SELinux: 81 classes, 305193 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev drm, type drm), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1448654130.620:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Nov 10 2015
EDAC MC0: Giving out device to 'i5100_edac.c' 'i5100': DEV 0000:00:10.1
ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008bf conflicts with OpRegion 0x000000000000088f-0x000000000000088f (\GPI3) (20090903/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008bf conflicts with OpRegion 0x00000000000008b8-0x00000000000008b8 (\GPI4) (20090903/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
tg3 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:01:00.0: setting latency timer to 64
tg3 0000:01:00.0: eth0: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address 00:24:e8:62:ce:66
tg3 0000:01:00.0: eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth1: Tigon3 [partno(BCM95722) rev a200] (PCI Express) MAC address 00:24:e8:62:ce:67
tg3 0000:02:00.0: eth1: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa0b
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa0b
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa0b
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa0b
platform microcode: firmware: requesting intel-ucode/06-17-0a
Microcode Update Driver: v2.00 , Peter Oruba
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:1:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ipmi device interface
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 8232956k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:8232956k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 289 on node -1
alloc kstat_irqs on node -1
tg3 0000:01:00.0: irq 289 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:01:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:01:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
alloc irq_desc for 290 on node -1
alloc kstat_irqs on node -1
tg3 0000:02:00.0: irq 290 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:02:00.0: eth1: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0: eth1: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
type=1305 audit(1448654144.721:4): audit_pid=1720 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
eth1: no IPv6 routers present
fuse init (API version 7.14)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
CE: hpet increased min_delta_ns to 20113 nsec