dmesg - p0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-229.14.1.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Tue Sep 15 15:05:51 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dc0b9fff] usable
BIOS-e820: [mem 0x00000000dc0ba000-0x00000000dc39ffff] reserved
BIOS-e820: [mem 0x00000000dc3a0000-0x00000000dc4adfff] ACPI data
BIOS-e820: [mem 0x00000000dc4ae000-0x00000000dc6ccfff] ACPI NVS
BIOS-e820: [mem 0x00000000dc6cd000-0x00000000dd718fff] reserved
BIOS-e820: [mem 0x00000000dd719000-0x00000000dd719fff] usable
BIOS-e820: [mem 0x00000000dd71a000-0x00000000dd79ffff] ACPI NVS
BIOS-e820: [mem 0x00000000dd7a0000-0x00000000ddbdafff] usable
BIOS-e820: [mem 0x00000000ddbdb000-0x00000000ddff3fff] reserved
BIOS-e820: [mem 0x00000000ddff4000-0x00000000ddffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P9X79 WS, BIOS 4701 08/26/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFC00000000 write-back
1 base 000400000000 mask 3FFFE0000000 write-back
2 base 0000DF000000 mask 3FFFFF000000 uncachable
3 base 0000E0000000 mask 3FFFE0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3568MB, range: 16MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3568MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd920-0x000fd92f] mapped at [ffff8800000fd920]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ee5000, 0x01ee5fff] PGTABLE
BRK [0x01ee6000, 0x01ee6fff] PGTABLE
BRK [0x01ee7000, 0x01ee7fff] PGTABLE
init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
[mem 0x41fe00000-0x41fffffff] page 2M
BRK [0x01ee8000, 0x01ee8fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
[mem 0x41c000000-0x41fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdc0b9fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdbffffff] page 2M
[mem 0xdc000000-0xdc0b9fff] page 4k
init_memory_mapping: [mem 0xdd719000-0xdd719fff]
[mem 0xdd719000-0xdd719fff] page 4k
BRK [0x01ee9000, 0x01ee9fff] PGTABLE
init_memory_mapping: [mem 0xdd7a0000-0xddbdafff]
[mem 0xdd7a0000-0xdd7fffff] page 4k
[mem 0xdd800000-0xdd9fffff] page 2M
[mem 0xdda00000-0xddbdafff] page 4k
BRK [0x01eea000, 0x01eeafff] PGTABLE
init_memory_mapping: [mem 0xddff4000-0xddffffff]
[mem 0xddff4000-0xddffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35def000-0x36eeffff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000dc3d6070 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dc3e07a8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dc3d6158 0A64E (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 00000000dc6c4080 00040
ACPI: APIC 00000000dc3e08b8 000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dc3e0980 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dc3e09c8 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000dc3e0a08 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dc3e0a98 CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
Initmem setup node 0 [mem 0x00000000-0x41fffffff]
NODE_DATA [mem 0x41ffd6000-0x41fffcfff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 16324MB)
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xdc0b9fff]
node 0: [mem 0xdd719000-0xdd719fff]
node 0: [mem 0xdd7a0000-0xddbdafff]
node 0: [mem 0xddff4000-0xddffffff]
node 0: [mem 0x100000000-0x41fffffff]
On node 0 totalpages: 4179103
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14037 pages used for memmap
DMA32 zone: 898306 pages, LIFO batch:31
Normal zone: 51200 pages used for memmap
Normal zone: 3276800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdc0ba000-0xdc39ffff]
PM: Registered nosave memory: [mem 0xdc3a0000-0xdc4adfff]
PM: Registered nosave memory: [mem 0xdc4ae000-0xdc6ccfff]
PM: Registered nosave memory: [mem 0xdc6cd000-0xdd718fff]
PM: Registered nosave memory: [mem 0xdd71a000-0xdd79ffff]
PM: Registered nosave memory: [mem 0xddbdb000-0xddff3fff]
PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xf0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041fc00000 s82752 r8192 d23744 u262144
pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113781
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 16189256k/17301504k available (6243k kernel code, 585092k absent, 527156k reserved, 4180k data, 1604k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-7.
NR_IRQS:327936 nr_irqs:1152 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3602.087 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7204.17 BogoMIPS (lpj=3602087)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 23916 entries in 94 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57633.39 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdc4ae000-0xdc6ccfff] (2224128 bytes)
PM: Registering ACPI NVS region [mem 0xdd71a000-0xdd79ffff] (548864 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfbffffff]
pci_bus 0000:00: root bus resource [mem 0x420000000-0x380fffffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb625000-0xfb625fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb624000-0xfb62400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb600000-0xfb61ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb623000-0xfb623fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb622000-0xfb6223ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x380ffff00000-0x380ffff03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb621000-0xfb6213ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb620000-0xfb6207ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x380ffff04000-0x380ffff040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10de:104a] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:04:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:04:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.1: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:07:00.0: reg 0x10: [mem 0xfb500000-0xfb5007ff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd0ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:08:00.0: [1b4b:9130] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:08:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:08:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:08:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:08:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:08:00.0: reg 0x24: [mem 0xfb410000-0xfb4107ff]
pci 0000:08:00.0: reg 0x30: [mem 0xfb400000-0xfb40ffff pref]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfb300000-0xfb307fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0a:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xfb200000-0xfb207fff 64bit]
pci 0000:0a:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:00:1c.5: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:0b:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:0b:00.0: reg 0x18: [io 0xb000-0xb01f]
pci 0000:0b:00.0: reg 0x1c: [mem 0xfb120000-0xfb123fff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x420000000-0x380fffffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdc0ba000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd71a000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddbdb000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0400-0x0453] could not be reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.1: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:00:1c.5: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfbffffff]
pci_bus 0000:00: resource 11 [mem 0x420000000-0x380fffffffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:09: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0a: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0c: resource 10 [mem 0xe0000000-0xfbffffff]
pci_bus 0000:0c: resource 11 [mem 0x420000000-0x380fffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17412k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd80ba000-0xdc0ba000] (64MB) mapped at [ffff8800d80ba000-ffff8800dc0b9fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1448357209.490:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31653
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb622000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb621000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.0: irq 64 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 71 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:09:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:09:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0a:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 79 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:0a:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:0a:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: e99fc437bd9cbfb4f1b1da87c157ff66569bee66'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2015-11-24 09:26:50 UTC (1448357210)
Freeing unused kernel memory: 1604k freed
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[248]: starting version 208
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
libata version 3.00 loaded.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0d90a0a1
nouveau [ DEVICE][0000:04:00.0] Chipset: GF119 (NVD9)
nouveau [ DEVICE][0000:04:00.0] Family : NVD0
nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
usb 1-1: new high-speed USB device number 2 using ehci-pci
firewire_ohci 0000:07:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
nouveau [ VBIOS][0000:04:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 75.19.55.00.02
nouveau 0000:04:00.0: irq 81 for MSI/MSI-X
nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:04:00.0][0x00000000][ffff880403f78000] reclocking of this ram type unsupported
nouveau [ PFB][0000:04:00.0] RAM type: DDR3
nouveau [ PFB][0000:04:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:04:00.0] GPU voltage: 900000uv
nouveau [ PTHERM][0000:04:00.0] FAN control: PWM
nouveau [ PTHERM][0000:04:00.0] fan management: automatic
nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
nouveau [ CLK][0000:04:00.0] 07: core 270 MHz memory 360 MHz
nouveau [ CLK][0000:04:00.0] 0f: core 810 MHz memory 500 MHz
nouveau [ CLK][0000:04:00.0] --: core 270 MHz memory 405 MHz
[TTM] Zone kernel: Available graphics memory: 8104148 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000000
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 02011362 00020010
nouveau [ DRM] DCB outp 03: 04022310 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY0 for buffer copies
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
nouveau [ DRM] allocated 1680x1050 fb: 0x60000, bo ffff8804048e6800
fbcon: nouveaufb (fb0) is primary device
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 30:85:a9:a4:52:23
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 82 for MSI/MSI-X
e1000e 0000:0b:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0b:00.0: irq 83 for MSI/MSI-X
e1000e 0000:0b:00.0: irq 84 for MSI/MSI-X
e1000e 0000:0b:00.0: irq 85 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb620000 port 0xfb620100 irq 82
ata2: SATA max UDMA/133 abar m2048@0xfb620000 port 0xfb620180 irq 82
ata3: SATA max UDMA/133 abar m2048@0xfb620000 port 0xfb620200 irq 82
ata4: SATA max UDMA/133 abar m2048@0xfb620000 port 0xfb620280 irq 82
ata5: SATA max UDMA/133 abar m2048@0xfb620000 port 0xfb620300 irq 82
ata6: SATA max UDMA/133 abar m2048@0xfb620000 port 0xfb620380 irq 82
ahci 0000:08:00.0: irq 86 for MSI/MSI-X
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq pio
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
ata7: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410100 irq 86
ata8: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410180 irq 86
ata9: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410200 irq 86
ata10: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410280 irq 86
ata11: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410300 irq 86
ata12: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410380 irq 86
ata13: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410400 irq 86
ata14: SATA max UDMA/133 abar m2048@0xfb410000 port 0xfb410480 irq 86
Console: switching to colour frame buffer device 210x65
nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:04:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:04:00.0 on minor 0
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e 0000:0b:00.0 eth1: registered PHC clock
e1000e 0000:0b:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 30:85:a9:a4:4c:7d
e1000e 0000:0b:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0b:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
firewire_core 0000:07:00.0: created device fw0: GUID 001e8c0000585e41, S400
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD5003AZEX-00K1GA0, 80.00A80, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD5000AAKS-60A7B2, 03.03B03, max UDMA/100
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5003AZEX-0 80.0 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 03.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata9: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: KINGSTON SV300S37A480G, 605ABBF2, max UDMA/133
ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: KINGSTON SV300S37A480G, 605ABBF2, max UDMA/133
ata5.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: KINGSTON SV300S37A480G, 605ABBF2, max UDMA/133
ata4.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata13: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata6.00: ATA-8: KINGSTON SV300S37A480G, 603ABBF0, max UDMA/133
ata6.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata14.00: configured for UDMA/66
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3.00: configured for UDMA/133
ata5.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 605A PQ: 0 ANSI: 5
ata4.00: configured for UDMA/133
sd 2:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB)
scsi 3:0:0:0: Direct-Access ATA KINGSTON SV300S3 605A PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 937703088 512-byte logical blocks: (480 GB/447 GiB)
scsi 4:0:0:0: Direct-Access ATA KINGSTON SV300S3 605A PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sd 2:0:0:0: [sdc] Attached SCSI disk
sdd: unknown partition table
sde: unknown partition table
ata6.00: configured for UDMA/133
sd 3:0:0:0: [sdd] Attached SCSI disk
scsi 5:0:0:0: Direct-Access ATA KINGSTON SV300S3 603A PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Attached SCSI disk
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata14.00: irq_stat 0x40000001
scsi 13:0:0:0: CDB:
Inquiry: 12 01 00 00 ff 00
ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
ata14: hard resetting link
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3602.100 MHz
Switching to clocksource tsc
usb 2-1.3: new low-speed USB device number 3 using ehci-pci
usb 2-1.3: New USB device found, idVendor=046d, idProduct=c050
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB-PS/2 Optical Mouse
usb 2-1.3: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0
usb 2-1.5: new low-speed USB device number 4 using ehci-pci
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c312
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Multimedia Keyboard
usb 2-1.5: Manufacturer: LITEON Technology
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.5/input0
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14.00: configured for UDMA/66
ata14: EH complete
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
XFS (sdb2): Mounting V4 Filesystem
XFS (sdb2): Ending clean mount
systemd-journald[136]: Received SIGTERM
type=1404 audit(1448357212.864:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 105350 rules.
SELinux: 2048 avtab hash slots, 105350 rules.
SELinux: 8 users, 102 roles, 4976 types, 300 bools, 1 sens, 1024 cats
SELinux: 83 classes, 105350 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev drm, type drm), not configured for labeling
SELinux: initialized (dev sdb2, type xfs), uses xattr
type=1403 audit(1448357213.115:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 283.438ms.
systemd[1]: Relabelled /dev and /run in 31.679ms.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
systemd-readahead[453]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
systemd-udevd[487]: starting version 208
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
mei_me 0000:00:16.0: irq 87 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
input: PC Speaker as /devices/platform/pcspkr/input/input4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Disabling ACPI video driver
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
md: bind
md: bind
md: bind
md: bind
md: raid0 personality registered for level 0
md/raid0:md0: md_size is 3749761024 sectors.
md: RAID0 configuration for md0 - 1 zone
md: zone0=[sdc/sdd/sde/sdf]
zone-offset= 0KB, device-offset= 0KB, size=1874880512KB
md0: detected capacity change from 0 to 1919877644288
md0: unknown partition table
snd_hda_intel 0000:00:1b.0: irq 88 for MSI/MSI-X
snd_hda_intel 0000:04:00.1: Disabling MSI
snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card1/input6
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card1/input7
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
AES CTR mode by8 optimization enabled
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
intel_rapl: domain dram energy ctr 0:0 not working, skip
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sdb1, type ext4), uses xattr
type=1305 audit(1448357220.919:4): audit_pid=661 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-journald[464]: Received request to flush runtime journal from PID 1
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth0 NIC Link is Down
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
fuse init (API version 7.22)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth0 NIC Link is Down
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
e1000e 0000:00:19.0: irq 80 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
TCP: lp registered
Adjusting tsc more than 11% (5181862 vs 5169959)
XFS (md0): Mounting V4 Filesystem
XFS (md0): Ending clean mount
SELinux: initialized (dev md0, type xfs), uses xattr