dmesg - sp
microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-17-generic (buildd@lcy01-32) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #21-Ubuntu SMP Fri Oct 23 19:56:16 UTC 2015 (Ubuntu 4.2.0-17.21-generic 4.2.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable
BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000b8ca5fff] usable
BIOS-e820: [mem 0x00000000b8ca6000-0x00000000b9847fff] reserved
BIOS-e820: [mem 0x00000000b9848000-0x00000000b98d4fff] usable
BIOS-e820: [mem 0x00000000b98d5000-0x00000000b9977fff] ACPI NVS
BIOS-e820: [mem 0x00000000b9978000-0x00000000ba176fff] reserved
BIOS-e820: [mem 0x00000000ba177000-0x00000000ba177fff] usable
BIOS-e820: [mem 0x00000000ba178000-0x00000000ba1bafff] ACPI NVS
BIOS-e820: [mem 0x00000000ba1bb000-0x00000000babf5fff] usable
BIOS-e820: [mem 0x00000000babf6000-0x00000000baff1fff] reserved
BIOS-e820: [mem 0x00000000baff2000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme4, BIOS P2.80 01/17/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB800000 mask FFF800000 uncachable
5 base 23F800000 mask FFF800000 uncachable
6 base 23F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 3000MB, range: 8MB, type UC
reg 5, base: 9208MB, range: 8MB, type UC
reg 6, base: 9206MB, range: 2MB, type UC
total RAM covered: 8110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3000MB, range: 8MB, type UC
reg 3, base: 3008MB, range: 64MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 1GB, type WB
reg 6, base: 9206MB, range: 2MB, type UC
reg 7, base: 9208MB, range: 8MB, type UC
e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd910-0x000fd91f] mapped at [ffff8800000fd910]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008b000] 8b000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[mem 0x23f400000-0x23f5fffff] page 2M
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23f3fffff]
[mem 0x220000000-0x23f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xb8ca5fff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0xb8bfffff] page 2M
[mem 0xb8c00000-0xb8ca5fff] page 4k
init_memory_mapping: [mem 0xb9848000-0xb98d4fff]
[mem 0xb9848000-0xb98d4fff] page 4k
init_memory_mapping: [mem 0xba177000-0xba177fff]
[mem 0xba177000-0xba177fff] page 4k
init_memory_mapping: [mem 0xba1bb000-0xbabf5fff]
[mem 0xba1bb000-0xba1fffff] page 4k
[mem 0xba200000-0xba9fffff] page 2M
[mem 0xbaa00000-0xbabf5fff] page 4k
init_memory_mapping: [mem 0xbaff2000-0xbaffffff]
[mem 0xbaff2000-0xbaffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x34080000-0x36037fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B9969078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000B9972F68 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000B9969188 009DDD (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000B9976080 000040
ACPI: APIC 0x00000000B9973078 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B9973110 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000B9973158 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 0x00000000B9973198 000112 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000B99732B0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000B99732E8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000B9973658 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000B9974008 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 0x00000000B9974AA0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
NODE_DATA(0) allocated [mem 0x23f5f1000-0x23f5f5fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000090fff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000b8ca5fff]
node 0: [mem 0x00000000b9848000-0x00000000b98d4fff]
node 0: [mem 0x00000000ba177000-0x00000000ba177fff]
node 0: [mem 0x00000000ba1bb000-0x00000000babf5fff]
node 0: [mem 0x00000000baff2000-0x00000000baffffff]
node 0: [mem 0x0000000100000000-0x000000023f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff]
On node 0 totalpages: 2067212
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 11798 pages used for memmap
DMA32 zone: 755068 pages, LIFO batch:31
Normal zone: 20440 pages used for memmap
Normal zone: 1308160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xb8ca6000-0xb9847fff]
PM: Registered nosave memory: [mem 0xb98d5000-0xb9977fff]
PM: Registered nosave memory: [mem 0xb9978000-0xba176fff]
PM: Registered nosave memory: [mem 0xba178000-0xba1bafff]
PM: Registered nosave memory: [mem 0xbabf6000-0xbaff1fff]
PM: Registered nosave memory: [mem 0xbb000000-0xbb7fffff]
PM: Registered nosave memory: [mem 0xbb800000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023f200000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2034889
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8021448K/8268848K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 247400K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3500.163 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.32 BogoMIPS (lpj=14000652)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30905 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (fam: 06, model: 3a, stepping: 09)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
#3
microcode: CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (56002.60 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb98d5000-0xb9977fff] (667648 bytes)
PM: Registering ACPI NVS region [mem 0xba178000-0xba1bafff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 19:00:01, date: 11/08/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802357B0000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880235735000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88023572EC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0162] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf6b00000-0xf6b0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf6b1a000-0xf6b1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6b18000-0xf6b183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6b10000-0xf6b13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6b17000-0xf6b173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6b16000-0xf6b167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6b15000-0xf6b150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1180] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:02:00.0: [10de:0e22] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xf2000000-0xf3ffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:02:00.0: reg 0x30: [mem 0xf4000000-0xf407ffff pref]
pci 0000:02:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xf4080000-0xf4083fff]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf2000000-0xf40fffff]
pci 0000:00:01.1: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:04:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:04:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:04:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:04:00.0: reg 0x24: [mem 0xf6a00000-0xf6a001ff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf6a00000-0xf6afffff]
pci 0000:05:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xea110000-0xea11ffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0xea100000-0xea10ffff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0xf6900000-0xf69007ff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xf6900000-0xf69fffff]
pci 0000:00:1c.4: bridge window [mem 0xea100000-0xea1fffff 64bit pref]
pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 06-07]
pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xf6800000-0xf6807fff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf68fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xb8ca6000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb98d5000-0xbbffffff]
e820: reserve RAM buffer [mem 0xba178000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbabf6000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xbfa00000-0xbfa00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40004000-0x40004fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.1: bridge window [mem 0xf2000000-0xf40fffff]
pci 0000:00:01.1: bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf6a00000-0xf6afffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xf6900000-0xf69fffff]
pci 0000:00:1c.4: bridge window [mem 0xea100000-0xea1fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:00:1c.5: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7: bridge window [mem 0xf6800000-0xf68fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf40fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf6a00000-0xf6afffff]
pci_bus 0000:05: resource 1 [mem 0xf6900000-0xf69fffff]
pci_bus 0000:05: resource 2 [mem 0xea100000-0xea1fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xf6800000-0xf68fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32480K (ffff880034080000 - ffff880036038000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb4ca6000-0xb8ca6000] (64MB) mapped at [ffff8800b4ca6000-ffff8800b8ca5fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1447009201.552:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-17-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-17-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-17-generic xhci-hcd
usb usb3: SerialNumber: 0000:08:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-17-generic xhci-hcd
usb usb4: SerialNumber: 0000:08:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6b18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-17-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6b17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-17-generic ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8aa87e568081d583a182b3af483c67e74ce09f4e'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:608:40
bdi 7:5: hash matches
rtc_cmos 00:02: setting system clock to 2015-11-08 19:00:02 UTC (1447009202)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 4 bits of entropy available
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:42: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:1f.2: version 3.0
[drm] Initialized drm 1.1.0 20060810
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:2c:03:f9
tg3 0000:05:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:05:00.0 enp5s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6b16000 port 0xf6b16100 irq 35
ata2: SATA max UDMA/133 abar m2048@0xf6b16000 port 0xf6b16180 irq 35
ata3: SATA max UDMA/133 abar m2048@0xf6b16000 port 0xf6b16200 irq 35
ata4: SATA max UDMA/133 abar m2048@0xf6b16000 port 0xf6b16280 irq 35
ata5: SATA max UDMA/133 abar m2048@0xf6b16000 port 0xf6b16300 irq 35
ata6: SATA max UDMA/133 abar m2048@0xf6b16000 port 0xf6b16380 irq 35
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xf6a00000 port 0xf6a00100 irq 36
ata8: SATA max UDMA/133 abar m512@0xf6a00000 port 0xf6a00180 irq 36
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 1-1: new full-speed USB device number 2 using xhci_hcd
usb 5-1: new high-speed USB device number 2 using ehci-pci
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new full-speed USB device number 2 using xhci_hcd
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-9: CT250BX100SSD1, MU02, max UDMA/133
ata6.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-8: WDC WD7500BPVT-22HXZT3, 01.01A01, max UDMA/133
ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 5-1: New USB device found, idVendor=8087, idProduct=0024
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
ata4.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: configured for UDMA/133
ata1.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 6-1: New USB device found, idVendor=8087, idProduct=0024
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.25 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
sda: sda1
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] Write Protect is off
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1C02 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD7500BPVT-2 1A01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA CT250BX100SSD1 MU02 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1 sdf2 < sdf5 >
sd 5:0:0:0: [sdf] Attached SCSI disk
sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sdc: p1 size 1953533952 extends beyond EOD, enabling native capacity
sdc: sdc1
sdc: p1 size 1953533952 extends beyond EOD, truncated
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sde: sde1 sde2 < sde5 sde6 sde7 >
sd 4:0:0:0: [sde] Attached SCSI disk
usb 3-1: New USB device found, idVendor=045e, idProduct=00f5
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB camera
usb 3-1: ep 0x83 - rounding interval to 512 microframes, ep desc says 800 microframes
usb 6-1.5: new full-speed USB device number 3 using ehci-pci
ata8: SATA link down (SStatus 0 SControl 300)
usb 6-1.5: New USB device found, idVendor=046d, idProduct=c223
usb 6-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-1.5: Product: G15 Keyboard Hub
hub 6-1.5:1.0: USB hub found
hub 6-1.5:1.0: 4 ports detected
usb 6-1.6: new full-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 3500.024 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327367d8f97, max_idle_ns: 440795252391 ns
usb 6-1.6: New USB device found, idVendor=046d, idProduct=c246
usb 6-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.6: Product: Gaming Mouse G300
usb 6-1.6: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.0/0003:046D:C246.0001/input/input6
hid-generic 0003:046D:C246.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G300] on usb-0000:00:1d.0-1.6/input0
input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.1/0003:046D:C246.0002/input/input7
random: nonblocking pool is initialized
hid-generic 0003:046D:C246.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Logitech Gaming Mouse G300] on usb-0000:00:1d.0-1.6/input1
usb 6-1.5.1: new low-speed USB device number 5 using ehci-pci
usb 6-1.5.1: New USB device found, idVendor=046d, idProduct=c226
usb 6-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-1.5.1: Product: G15 Gaming Keyboard
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5.1/6-1.5.1:1.0/0003:046D:C226.0003/input/input8
hid-generic 0003:046D:C226.0003: input,hidraw2: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-1.5.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5.1/6-1.5.1:1.1/0003:046D:C226.0004/input/input9
hid-generic 0003:046D:C226.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-1.5.1/input1
usb 6-1.5.4: new full-speed USB device number 6 using ehci-pci
usb 6-1.5.4: New USB device found, idVendor=046d, idProduct=c227
usb 6-1.5.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 6-1.5.4: Product: G15 GamePanel LCD
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5.4/6-1.5.4:1.0/0003:046D:C227.0005/input/input10
hid-generic 0003:046D:C227.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-1.5.4/input0
usb 1-1: New USB device found, idVendor=046d, idProduct=0a1f
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Logitech G930 Headset
usb 1-1: Manufacturer: Logitech
usb 1-1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:046D:0A1F.0006/input/input11
clocksource: Switched to clocksource tsc
hid-generic 0003:046D:0A1F.0006: input,hiddev0,hidraw5: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:14.0-1/input3
EXT4-fs (sdf5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Journal Service.
EXT4-fs (sdf5): re-mounted. Opts: errors=remount-ro
systemd-journald[402]: Received request to flush runtime journal from PID 1
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20150619/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20150619/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20150619/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
media: Linux media interface: v0.10
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
gspca_main: sonixj-2.14.0 probing 045e:00f5
input: sonixj as /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb3/3-1/input/input12
usbcore: registered new interface driver sonixj
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
usbcore: registered new interface driver snd-usb-audio
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia 0000:02:00.0: enabling device (0000 -> 0003)
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 2
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 358.09 Wed Oct 7 19:59:00 PDT 2015
audit: type=1400 audit(1447005604.842:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.842:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=724 comm="apparmor_parser"
Adding 7811068k swap on /dev/sdf1. Priority:-1 extents:1 across:7811068k SSFS
audit: type=1400 audit(1447005604.846:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.846:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.846:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.846:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.858:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.858:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=724 comm="apparmor_parser"
audit: type=1400 audit(1447005604.858:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=724 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25
Adding 9999356k swap on /dev/sde6. Priority:-2 extents:1 across:9999356k FS
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input26
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input27
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input28
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card3/input29
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 358.09 Wed Oct 7 19:33:27 PDT 2015
nvidia-modeset: Allocated GPU:0 (GPU-843ea169-fe62-a735-1c9b-3b8e54180411) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:1 (GPU-01ae9b2c-6852-0e5c-c1fc-3374fad7bc71) @ PCI:0000:02:00.0
tg3 0000:05:00.0 enp5s0: Link is up at 1000 Mbps, full duplex
tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
tg3 0000:05:00.0 enp5s0: EEE is enabled
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
retire_capture_urb: 42 callbacks suppressed
totem[4197]: segfault at 1d6bbe4b ip 00007f36f73338b8 sp 00007ffc63b37150 error 4 in libnvidia-glcore.so.358.09[7f36f639f000+12df000]
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000