dmesg - ztjk
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #33-Ubuntu SMP Mon Sep 21 20:58:04 UTC 2015 (Ubuntu 3.19.0-30.33-generic 3.19.8-ckt6)
Command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000b3fecfff] usable
BIOS-e820: [mem 0x00000000b3fed000-0x00000000b4d6dfff] reserved
BIOS-e820: [mem 0x00000000b4d6e000-0x00000000b4daffff] usable
BIOS-e820: [mem 0x00000000b4db0000-0x00000000b61affff] reserved
BIOS-e820: [mem 0x00000000b61b0000-0x00000000baabefff] usable
BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20245/INVALID, BIOS 7BCN21WW(V1.05) 04/18/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BB000000 mask FFF000000 uncachable
3 base 0BC000000 mask FFC000000 uncachable
4 base 0FF800000 mask FFF800000 write-protect
5 base 100000000 mask FC0000000 write-back
6 base 13F600000 mask FFFE00000 uncachable
7 base 13F800000 mask FFF800000 uncachable
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x13f400000-0x13f5fffff]
[mem 0x13f400000-0x13f5fffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x13f3fffff]
[mem 0x120000000-0x13f3fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0x40005000-0xb3fecfff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0xb3dfffff] page 2M
[mem 0xb3e00000-0xb3fecfff] page 4k
init_memory_mapping: [mem 0xb4d6e000-0xb4daffff]
[mem 0xb4d6e000-0xb4daffff] page 4k
init_memory_mapping: [mem 0xb61b0000-0xbaabefff]
[mem 0xb61b0000-0xb61fffff] page 4k
[mem 0xb6200000-0xba9fffff] page 2M
[mem 0xbaa00000-0xbaabefff] page 4k
init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[mem 0xbafff000-0xbaffffff] page 4k
RAMDISK: [mem 0x7e256000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BAFFE210 0000AC (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x00000000BAFFA000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x00000000BAFEC000 00A1E8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x00000000BAFBB000 000040
ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x00000000BAFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x00000000BAFFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x00000000BAFF9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x00000000BAFF8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000BAFF7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFEB000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000BAFE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFE8000 000C0A (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFE7000 000696 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x00000000BAFE5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x00000000BAFE4000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x00000000BAFE2000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFE0000 0008E4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFDF000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000BAFDB000 00232A (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
NODE_DATA(0) allocated [mem 0x13f5f5000-0x13f5f9fff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xb3fecfff]
node 0: [mem 0xb4d6e000-0xb4daffff]
node 0: [mem 0xb61b0000-0xbaabefff]
node 0: [mem 0xbafff000-0xbaffffff]
node 0: [mem 0x100000000-0x13f5fffff]
Initmem setup node 0 [mem 0x00001000-0x13f5fffff]
On node 0 totalpages: 1015002
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11741 pages used for memmap
DMA32 zone: 751422 pages, LIFO batch:31
Normal zone: 4056 pages used for memmap
Normal zone: 259584 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xb3fed000-0xb4d6dfff]
PM: Registered nosave memory: [mem 0xb4db0000-0xb61affff]
PM: Registered nosave memory: [mem 0xbaabf000-0xbaebefff]
PM: Registered nosave memory: [mem 0xbaebf000-0xbafbefff]
PM: Registered nosave memory: [mem 0xbafbf000-0xbaffefff]
PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88013f200000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 999120
Policy zone: Normal
Kernel command line: BOOT_IMAGE=lenovotest/casper/vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=192.168.10.2:/tftpboot/lenovotest initrd=lenovotest/casper/initrd.gz quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3880372K/4060008K available (8004K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 179636K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.676 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.35 BogoMIPS (lpj=9578704)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30120 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19157.40 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 4:13:30, date: 10/24/51
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139F4A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120111)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139F2A800 000303 (v01 PmRef ApIst 00003000 INTL 20120111)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139EBF800 000119 (v01 PmRef ApCst 00003000 INTL 20120111)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd3614000-0xd361400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd3618000-0xd36183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd3617000-0xd36173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e01] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x40b8-0x40bf]
pci 0000:00:1f.2: reg 0x14: [io 0x40cc-0x40cf]
pci 0000:00:1f.2: reg 0x18: [io 0x40b0-0x40b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x40c8-0x40cb]
pci 0000:00:1f.2: reg 0x20: [io 0x4090-0x409f]
pci 0000:00:1f.2: reg 0x24: [io 0x4080-0x408f]
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd3615000-0xd36150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1f.5: [8086:1e09] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x40a8-0x40af]
pci 0000:00:1f.5: reg 0x14: [io 0x40c4-0x40c7]
pci 0000:00:1f.5: reg 0x18: [io 0x40a0-0x40a7]
pci 0000:00:1f.5: reg 0x1c: [io 0x40c0-0x40c3]
pci 0000:00:1f.5: reg 0x20: [io 0x4070-0x407f]
pci 0000:00:1f.5: reg 0x24: [io 0x4060-0x406f]
pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xd3500000-0xd353ffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xd3400000-0xd347ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xb3fed000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb4db0000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] could not be reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0xfd60-0xfd63] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xff000fff] has been reserved
system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x20000000-0x201fffff] has been reserved
system 00:06: [mem 0x40004000-0x40004fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd3480000-0xd348ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd3500000-0xd35fffff]
pci_bus 0000:03: resource 1 [mem 0xd3400000-0xd34fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30376K (ffff88007e256000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb6abf000-0xbaabf000] (64MB) mapped at [ffff8800b6abf000-ffff8800baabefff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(2581733614.048:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (50 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 21
ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 21
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3618000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3617000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS5] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 091db276173d833742e96ac870591adb9bccda53'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:420:212
rtc_cmos 00:01: setting system clock to 2051-10-24 04:13:34 UTC (2581733614)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-4: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 1-4: New USB device found, idVendor=5986, idProduct=0295
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Lenovo EasyCamera
usb 1-4: Manufacturer: Vimicro corp.
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 2394.560 MHz
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: HGST HTS541010A9E680, JA0ZB570, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: PLDS DVD-RW DU8A5SH, NL61, max UDMA/100
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 B570 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 0:0:1:0: CD-ROM PLDS DVD-RW DU8A5SH NL61 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-1.3: new full-speed USB device number 3 using ehci-pci
sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
usb 3-1.3: New USB device found, idVendor=0cf3, idProduct=3004
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.3: Product: Bluetooth USB Host Controller
usb 3-1.3: Manufacturer: Atheros Communications
usb 3-1.3: SerialNumber: Alaska Day 2006
ata2.00: failed to resume link (SControl 0)
usb 3-1.4: new high-speed USB device number 4 using ehci-pci
usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0129
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: USB2.0-CRW
usb 3-1.4: Manufacturer: Generic
usb 3-1.4: SerialNumber: 20100201396000000
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Switched to clocksource tsc
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 0)
ata2.01: SATA link down (SStatus 4 SControl 0)
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
random: systemd-udevd urandom read with 20 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver rtsx_usb
wmi: Mapper loaded
alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:e1:ab:61]
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input7
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d7000a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GF117 (NVD7)
nouveau [ DEVICE][0000:01:00.0] Family : NVC0
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 75.17.5a.00.ff
nouveau [ VBIOS][0000:01:00.0] running init tables
fbcon: inteldrmfb (fb0) is primary device
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8800aff1f000] reclocking of this ram type unsupported
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] internal sensor: no
nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 775 MHz memory 900 MHz
nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 324 MHz
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 1956348 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau W[ DRM] Pointer to TMDS table invalid
nouveau [ DRM] DCB version 4.0
nouveau W[ DRM] Pointer to flat panel table invalid
nouveau [ DRM] MM: using COPY0 for buffer copies
[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
[drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Mounted /rofs.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounted VMware vmblock fuse mount.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Nameserver information manager.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Various fixups to make systemd work better on Debian.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
systemd-journald[424]: Received request to flush runtime journal from PID 1
ppdev: user-space parallel port driver
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
media: Linux media interface: v0.10
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 3-1.3: USB disconnect, device number 3
sound hdaudioC0D0: CX20757: BIOS auto-probing.
sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x1a
sound hdaudioC0D0: Mic=0x19
sound hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
usb 3-1.3: new full-speed USB device number 5 using ehci-pci
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004a00000, irq=17
cgroup: new mount options do not match the existing superblock, will be ignored
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
nouveau E[ PBUS][0000:01:00.0] MMIO write of 0x0000001f FAULT at 0x6013d4 [ !ENGINE ]
usb 3-1.3: New USB device found, idVendor=0cf3, idProduct=3004
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.3: Product: Bluetooth USB Host Controller
usb 3-1.3: Manufacturer: Atheros Communications
usb 3-1.3: SerialNumber: Alaska Day 2006
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)