dmesg - fftwstock2d
tries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 2048MB = 2048MB total
Memory: 1665512k/1665512k available, 431640k reserved, 925692K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0c0af40 (12300 kB)
.init : 0xc0c0b000 - 0xc0c6b0c0 ( 385 kB)
.data : 0xc0c6c000 - 0xc0dad3d0 (1285 kB)
.bss : 0xc0db009c - 0xc0e40a58 ( 579 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:544
Architected local timer running at 24.00MHz.
Switching to timer-based delay loop
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 30150 entries in 89 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x207e7840 - 0x207e7898
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
CPU4: failed to boot: -22
CPU5: failed to boot: -22
CPU6: failed to boot: -22
CPU7: failed to boot: -22
Brought up 4 CPUs
SMP: Total of 4 processors activated (19200.00 BogoMIPS).
devtmpfs: initialized
script_init enter!
script_init exit!
sched: registering cpufreq notifiers for scale-invariant loads
pinctrl core: initialized pinctrl subsystem
dummy:
NET: Registered protocol family 16
script_sysfs_init success
sunxi_dump_init success
sunxi pinctrl probe enter
gpiochip_add: registered GPIOs 0 to 447 on device: sunxi-pinctrl
sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
axp_pinctrl_probe enter...
gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
mainkey total count : 97
mainkey name : product, pin count : 0
mainkey name : platform, pin count : 0
mainkey name : target, pin count : 0
mainkey name : charging_type, pin count : 0
mainkey name : key_detect_en, pin count : 0
mainkey name : power_sply, pin count : 0
mainkey name : slave_power_sply, pin count : 0
mainkey name : gpio_bias, pin count : 0
mainkey name : card_boot, pin count : 0
mainkey name : pm_para, pin count : 0
mainkey name : card0_boot_para, pin count : 6
mainkey name : card2_boot_para, pin count : 6
mainkey name : boot_disp, pin count : 0
mainkey name : twi_para, pin count : 2
mainkey name : uart_para, pin count : 2
mainkey name : jtag_para, pin count : 4
mainkey name : clock, pin count : 0
mainkey name : dram_para, pin count : 0
mainkey name : gmac0, pin count : 16
mainkey name : wakeup_src_para, pin count : 3
mainkey name : twi0, pin count : 2
mainkey name : twi1, pin count : 2
mainkey name : twi2, pin count : 2
mainkey name : twi3, pin count : 2
mainkey name : twi4, pin count : 2
mainkey name : uart0, pin count : 2
mainkey name : uart1, pin count : 4
mainkey name : uart2, pin count : 4
mainkey name : uart3, pin count : 4
mainkey name : uart4, pin count : 4
mainkey name : uart5, pin count : 2
mainkey name : spi0, pin count : 4
mainkey name : spi1, pin count : 0
mainkey name : spi2, pin count : 4
mainkey name : spi3, pin count : 7
mainkey name : spi_devices, pin count : 0
mainkey name : spi_board0, pin count : 0
mainkey name : rtp_para, pin count : 0
mainkey name : ctp_para, pin count : 0
mainkey name : ctp_list_para, pin count : 0
mainkey name : tkey_para, pin count : 0
mainkey name : motor_para, pin count : 0
mainkey name : ths_para, pin count : 0
mainkey name : cooler_table, pin count : 0
mainkey name : nand0_para, pin count : 19
mainkey name : nand1_para, pin count : 19
mainkey name : disp_init, pin count : 0
mainkey name : lcd0_para, pin count : 29
map mainkey [lcd0_para] to pinctrl, map number [2]
mainkey name : hdmi_para, pin count : 0
mainkey name : pwm0_para, pin count : 1
mainkey name : pwm1_para, pin count : 1
mainkey name : csi0, pin count : 5
mainkey name : csi1, pin count : 0
mainkey name : tvout_para, pin count : 0
mainkey name : tvin_para, pin count : 0
mainkey name : mmc0_para, pin count : 7
mainkey name : mmc1_para, pin count : 6
mainkey name : mmc2_para, pin count : 11
mainkey name : mmc3_para, pin count : 11
mainkey name : smc_para, pin count : 0
mainkey name : usbc0, pin count : 2
map mainkey [usbc0] to pinctrl, map number [2]
mainkey name : usbc1, pin count : 1
mainkey name : usbc2, pin count : 1
mainkey name : usbc3, pin count : 0
mainkey name : usb_feature, pin count : 0
mainkey name : msc_feature, pin count : 0
mainkey name : serial_feature, pin count : 0
mainkey name : gsensor_para, pin count : 1
mainkey name : gsensor_list_para, pin count : 0
mainkey name : gps_para, pin count : 0
mainkey name : wifi_para, pin count : 11
mainkey name : 3g_para, pin count : 5
mainkey name : gy_para, pin count : 1
mainkey name : gy_list_para, pin count : 0
mainkey name : ls_para, pin count : 1
mainkey name : ls_list_para, pin count : 0
mainkey name : compass_para, pin count : 0
mainkey name : leds_para, pin count : 2
mainkey name : bt_para, pin count : 0
mainkey name : s_i2s1, pin count : 9
mainkey name : audio0, pin count : 3
mainkey name : spdif0, pin count : 2
mainkey name : s_cir0, pin count : 1
mainkey name : cir, pin count : 1
mainkey name : pmu1_para, pin count : 0
mainkey name : pmu2_para, pin count : 0
mainkey name : dvfs_table, pin count : 0
mainkey name : vf_table0, pin count : 0
mainkey name : vf_table1, pin count : 0
mainkey name : vf_table2, pin count : 0
mainkey name : Vdevice, pin count : 0
mainkey name : s_uart0, pin count : 2
mainkey name : s_rsb0, pin count : 2
mainkey name : s_jtag0, pin count : 4
mainkey name : s_powchk, pin count : 0
mainkey name : dram_dvfs_table, pin count : 0
mainkey name : dram_scene_table, pin count : 0
axp pinctrl driver probe ok
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[sunxi-module]: [sunxi-module.0] probe success
Not Found clk pll3 in script
Not Found clk pll7 in script
script config pll8 to 297 Mhz
script config pll10 to 2376 Mhz
sunxi_default_clk_init
bio: create slab at 0
[ARISC] :sunxi-arisc driver v2.00
[ARISC] :arisc version: [v0.0.37]
[sunxi-module]: arisc register success
arisc_dvfs_cfg_vf_table: vf table type [1=vf_table1]
arisc_dvfs_cfg_vf_table: freq [L_LV1_freq-0=1200000000]
arisc_dvfs_cfg_vf_table: volt [L_LV1_volt-0=1060]
arisc_dvfs_cfg_vf_table: freq [L_LV2_freq-1=1008000000]
arisc_dvfs_cfg_vf_table: volt [L_LV2_volt-1=960]
arisc_dvfs_cfg_vf_table: freq [L_LV3_freq-2=912000000]
arisc_dvfs_cfg_vf_table: volt [L_LV3_volt-2=900]
arisc_dvfs_cfg_vf_table: freq [L_LV4_freq-3=720000000]
arisc_dvfs_cfg_vf_table: volt [L_LV4_volt-3=840]
arisc_dvfs_cfg_vf_table: freq [L_LV5_freq-4=0]
arisc_dvfs_cfg_vf_table: volt [L_LV5_volt-4=840]
arisc_dvfs_cfg_vf_table: freq [L_LV6_freq-5=0]
arisc_dvfs_cfg_vf_table: volt [L_LV6_volt-5=840]
arisc_dvfs_cfg_vf_table: freq [L_LV7_freq-6=0]
arisc_dvfs_cfg_vf_table: volt [L_LV7_volt-6=840]
arisc_dvfs_cfg_vf_table: freq [L_LV8_freq-7=0]
arisc_dvfs_cfg_vf_table: volt [L_LV8_volt-7=840]
arisc_dvfs_cfg_vf_table: freq [B_LV1_freq-0=1800000000]
arisc_dvfs_cfg_vf_table: volt [B_LV1_volt-0=1160]
arisc_dvfs_cfg_vf_table: freq [B_LV2_freq-1=1608000000]
arisc_dvfs_cfg_vf_table: volt [B_LV2_volt-1=1100]
arisc_dvfs_cfg_vf_table: freq [B_LV3_freq-2=1416000000]
arisc_dvfs_cfg_vf_table: volt [B_LV3_volt-2=1020]
arisc_dvfs_cfg_vf_table: freq [B_LV4_freq-3=1320000000]
arisc_dvfs_cfg_vf_table: volt [B_LV4_volt-3=960]
arisc_dvfs_cfg_vf_table: freq [B_LV5_freq-4=1200000000]
arisc_dvfs_cfg_vf_table: volt [B_LV5_volt-4=900]
arisc_dvfs_cfg_vf_table: freq [B_LV6_freq-5=1008000000]
arisc_dvfs_cfg_vf_table: volt [B_LV6_volt-5=840]
arisc_dvfs_cfg_vf_table: freq [B_LV7_freq-6=0]
arisc_dvfs_cfg_vf_table: volt [B_LV7_volt-6=840]
arisc_dvfs_cfg_vf_table: freq [B_LV8_freq-7=0]
arisc_dvfs_cfg_vf_table: volt [B_LV8_volt-7=840]
[ARISC] :sunxi-arisc driver v2.00 startup succeeded
CPU4: Booted secondary processor
CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
CPU5: Booted secondary processor
CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
CPU6: Booted secondary processor
CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
CPU7: Booted secondary processor
CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sunxi_i2c_adap_init()1438 - [Apr 11 2015 10:17:52]Sunxi I2C init ...
twi_chan_cfg()350 - [twi0] fetch twi_regulator from sysconfig failed
twi_chan_cfg()350 - [twi1] fetch twi_regulator from sysconfig failed
twi_chan_cfg()350 - [twi2] fetch twi_regulator from sysconfig failed
twi_chan_cfg()350 - [twi3] fetch twi_regulator from sysconfig failed
twi_chan_cfg()350 - [twi4] fetch twi_regulator from sysconfig failed
Linux video capture interface: v2.00
axp22_board axp22_board: AXP (CHIP ID: 0x62) detected
axp22_dcdc1: 1600 3400 mV at 3000 mV
axp22_dcdc2: 600 1540 mV at 900 mV
axp22_dcdc3: 600 1860 mV at 900 mV
axp22_dcdc4: 600 2600 mV at 900 mV
axp22_dcdc5: 1000 2550 mV at 1500 mV
axp22_rtc: 3000 mV
axp22_aldo1: 700 3300 mV at 3000 mV
axp22_aldo2: 700 3300 mV at 1800 mV
axp22_aldo3: 700 3300 mV at 3000 mV
axp22_dldo1: 700 4200 mV at 3400 mV
axp22_dldo2: 700 3300 mV at 3000 mV
axp22_eldo1: 700 3300 mV at 3000 mV
axp22_eldo2: 700 3300 mV at 1800 mV
axp22_eldo3: 700 3300 mV at 3000 mV
axp22_dc5ldo: 700 1400 mV at 900 mV
axp22_ldoio0: 700 3300 mV at 3000 mV
axp22_ldoio1: 700 3300 mV at 2500 mV
axp22_sw0: at 700 mV
axp22_dc1sw: at 700 mV
axp22_dc1sw: supplied by axp22_dcdc1
input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.21/input/input0
now_rest_vol = 100
axp15_board axp15_board: AXP (CHIP ID: 0x60) detected
axp15_dcdc1: 600 1520 mV at 840 mV
axp15_dcdc2: 1000 2550 mV at 1350 mV
axp15_dcdc3: 600 1520 mV at 900 mV
axp15_dcdc4: 600 3300 mV at 900 mV
axp15_dcdc5: 1100 3400 mV at 2100 mV
axp15_aldo1: 700 3300 mV at 3000 mV
axp15_aldo2: 700 3300 mV at 700 mV
axp15_aldo3: 700 3300 mV at 700 mV
axp15_bldo1: 700 1900 mV at 1800 mV
axp15_bldo1: supplied by axp15_dcdc5
axp15_bldo2: 700 1900 mV at 1800 mV
axp15_bldo2: supplied by axp15_dcdc5
axp15_bldo3: 700 1900 mV at 700 mV
axp15_bldo3: supplied by axp15_dcdc5
axp15_bldo4: 700 1900 mV at 700 mV
axp15_bldo4: supplied by axp15_dcdc5
axp15_cldo1: 700 3300 mV at 3000 mV
axp15_cldo2: 700 4200 mV at 700 mV
axp15_cldo3: 700 3300 mV at 700 mV
axp15_sw0: at 700 mV
Advanced Linux Sound Architecture Driver Version 1.0.25.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
[sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
[sunxi_hci_sunxi]: get usb_restrict_flag failed
[sunxi_hci_sunxi]: get usb_regulator is failed
[sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
[sunxi_hci_sunxi]: get usb_restrict_flag failed
[sunxi_hci_sunxi]: get usb_regulator is failed
[sunxi_hci_sunxi]: sunxi-ehci2(restrict_gpio) is invalid
[sunxi_hci_sunxi]: get usb_restrict_flag failed
[sunxi_hci_sunxi]: get usb_regulator is failed
[sunxi_hci_sunxi]: sunxi-ohci2(restrict_gpio) is invalid
[sunxi_hci_sunxi]: get usb_restrict_flag failed
[sunxi_hci_sunxi]: get usb_regulator is failed
[sunxi_hci_sunxi]: sunxi-ehci3(restrict_gpio) is invalid
[sunxi_hci_sunxi]: sunxi-ehci3(drv vbus) is invalid
[sunxi_hci_sunxi]: get usb_restrict_flag failed
[sunxi_hci_sunxi]: get usb_regulator is failed
[sunxi_hci_sunxi]: sunxi-ohci3(restrict_gpio) is invalid
[sunxi_hci_sunxi]: sunxi-ohci3(drv vbus) is invalid
[sunxi_hci_sunxi]: get usb_restrict_flag failed
[sunxi_hci_sunxi]: get usb_regulator is failed
[usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
get usbc(0) usb_restrict_flag failed
no usbc(0) det_vbus gpio and try to axp det_pin
get usbc0(usb_restrict pin) failed
[ddrfreq] dram_clk value is 672
[ddrfreq] sunxi_dramfreq_max=672000
[ddrfreq] dram_type value is 3
[ddrfreq] dram_zq value is 0x3f3fdd
[ddrfreq] dram_odt_en value is 1
[ddrfreq] dram_para1 value is 0x10f40800
[ddrfreq] dram_para2 value is 0x1200
[ddrfreq] dram_mr0 value is 0x1a50
[ddrfreq] dram_mr1 value is 0x40
[ddrfreq] dram_mr2 value is 0x10
[ddrfreq] dram_mr3 value is 0x0
[ddrfreq] dram_tpr0 value is 0x4e214ea
[ddrfreq] dram_tpr1 value is 0x4214ad
[ddrfreq] dram_tpr2 value is 0x10a75030
[ddrfreq] dram_tpr3 value is 0x0
[ddrfreq] dram_tpr4 value is 0x0
[ddrfreq] dram_tpr5 value is 0x0
[ddrfreq] dram_tpr6 value is 0x0
[ddrfreq] dram_tpr7 value is 0x0
[ddrfreq] dram_tpr8 value is 0x0
[ddrfreq] dram_tpr9 value is 0x0
[ddrfreq] dram_tpr10 value is 0x0
[ddrfreq] dram_tpr11 value is 0x0
[ddrfreq] dram_tpr12 value is 168
[ddrfreq] sunxi_dramfreq_min=168000
[ddrfreq] dram_tpr13 value is 0x23
[ddrfreq] warning: disabled!
[dsm] use sysconfig
[dsm] -----------Dram scene-freq Table------------
[dsm] scene = 0 frequency = 672000KHz
[dsm] scene = 1 frequency = 480000KHz
[dsm] scene = 2 frequency = 240000KHz
[dsm] scene = 3 frequency = 168000KHz
[dsm] scene = 4 frequency = 480000KHz
[dsm] --------------------------------------------
[ddrfreq] LV_count value is 3
[ddrfreq] ---------------Dram V-F Table---------------
[ddrfreq] voltage = 900mv frequency = 672000KHz
[ddrfreq] voltage = 840mv frequency = 168000KHz
[ddrfreq] voltage = 840mv frequency = 0KHz
[ddrfreq] --------------------------------------------
[ddrfreq] last_vdd=900
[ddrfreq] __sram_start: 0xc0dae000, __sram_end: 0xc0db0078, __sram_text_start: 0xf0014000, __sram_data_end: 0xf0016078
[ddrfreq] sunxi dramfreq probe ok!
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[powernow inf] module init
[powernow inf] create class sw_powernow done
[pm]aw_pm_init!
standby_mode = 1.
wakeup src cnt is : 3.
[exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
[exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x18
[exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x2018
[exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[wifi]: select wifi: ap6330 !!
[ap6xxx]: module power name axp22_dldo1
[ap6xxx]: module power ext1 name axp15_cldo3
[ap6xxx]: module power ext2 name axp22_ldoio0
[ap6xxx]: sdio_power name
[ap6xxx]: ap6xxx module power set by axp.
[ap6xxx]: regulator axp22_dldo1 on.
[ap6xxx]: regulator axp15_cldo3 on.
[ap6xxx]: regulator axp22_ldoio0 on.
[ap6xxx]: set cko2 32k clk out
[wifi_pm]: wifi gpio init is OK !!
sunxi_reg_init enter
audit: initializing netlink socket (disabled)
type=2000 audit(1.240:1): initialized
highmem bounce pool size: 64 pages
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1444
SELinux: Registering netfilter hooks
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
GTBUS_PMU GTBUS_PMU: probed
pwm module init!
[DISP]disp_module_init
[DISP]disp_probe
[DISP] IEP_Deu_Init,line:216: deu_mode1 not exist.
[DISP] lcd_panel_parameter_check,line:379: get lcd1para lcd_used fail
[DISP] disp_lcd_gpio_init,line:2017: lcd 2 is not register
[DISP] disp_init_hdmi,line:492: screen 0 do not support HDMI TYPE!
[DISP] disp_init_hdmi,line:492: screen 2 do not support HDMI TYPE!
[DISP] disp_init_connections,line:133: smbl's set manager is NULL
[DISP] disp_init_connections,line:139: capture's set manager is NULL
[DISP] disp_init_connections,line:145: smcl's set manager is NULL
[DISP]Fb_Init
disp_init.disp_composer_mode = 1
[DISP] parser_disp_init_para,line:130: fetch script data disp_init.screen2_output_type fail
[DISP] parser_disp_init_para,line:143: invalid screen0_output_type 0
[DISP] parser_disp_init_para,line:147: fetch script data disp_init.screen2_output_mode fail
[DISP] parser_disp_init_para,line:208: fetch script data disp_init.fb2_format fail
[DISP] parser_disp_init_para,line:213: fetch script data disp_init.fb2_scaler_mode_enable fail
[DISP] parser_disp_init_para,line:218: fetch script data disp_init.fb2_width fail
[DISP] parser_disp_init_para,line:223: fetch script data disp_init.fb2_height fail
sunxi_map_kernel ok, phys_addr=0x88000000, size=0x600000, virt_addr=0xf007b000
Console: switching to colour frame buffer device 128x48
[DISP]disp_probe finish
[DISP]capture_module_init
[DISP]capture_probe
[DISP]capture finish
[DISP]disp_module_init finish
sunxi_uart_init()1446 - Sunxi Uart driver init ...
sw_uart_get_devinfo()1430 - uart0 fetch uart_regulator from sysconfig failed
sw_uart_get_devinfo()1430 - uart2 fetch uart_regulator from sysconfig failed
sw_uart_get_devinfo()1430 - uart4 fetch uart_regulator from sysconfig failed
sw_uart_get_devinfo()1430 - uart5 fetch uart_regulator from sysconfig failed
uart0: ttyS0 at MMIO 0x7000000 (irq = 32) is a SUNXI
sw_console_setup()1190 - console setup baud 115200 parity n bits 8, flow n
console [ttyS0] enabled
uart2: ttyS2 at MMIO 0x7000800 (irq = 34) is a SUNXI
uart4: ttyS4 at MMIO 0x7001000 (irq = 36) is a SUNXI
uart5: ttyS5 at MMIO 0x7001400 (irq = 37) is a SUNXI
G2D: drv_g2d_init
G2D: Module initialized.major:248
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
sunxi_hw_init: sunxi debug register driver init
sunxi_spi_init()2048 - [Apr 11 2015 10:20:19]Sunxi SPI init ...
sunxi_spi_chan_cfg()1368 - [spi-0] fetch spi_regulator from sysconfig failed
sunxi_spi_chan_cfg()1368 - [spi-1] fetch spi_regulator from sysconfig failed
sunxi_spi_chan_cfg()1368 - [spi-2] fetch spi_regulator from sysconfig failed
sunxi_spi_chan_cfg()1368 - [spi-3] fetch spi_regulator from sysconfig failed
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
start: sunxi_open_usb_clock
end: sunxi_open_usb_clock
get usbc0_regulator is failed
sunxi_controller_mode:device!
sunxi_gadget_init,v1.1
sunxi_controller_mode:NULL!
start: sunxi_close_usb_clock
end: sunxi_close_usb_clock
otgc_work_mode:0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc0e2d15c
[sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
[sunxi_hci_sunxi]: clk_prepare_enable: hci_ahb_gate
[sunxi_hci_sunxi]: [sunxi-ehci1]: open hci clock,usbc_no:1, is_ohci:0
[sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf0a00000
sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
ehci_irq: highspeed device connect
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[sunxi_hci_sunxi]: [sunxi-ehci2]: probe, pdev->name: sunxi-ehci, pdev->id: 2, sunxi_ehci: 0xc0e2d364
[sunxi_hci_sunxi]: [sunxi-ehci2]: open clock, is_open: 0
[sunxi_hci_sunxi]: [sunxi-ehci2]: open hci clock,usbc_no:2, is_ohci:0
[sunxi_hci_sunxi]: [sunxi-ehci2]: Set USB Power ON
sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf0a01000
sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[sunxi_hci_sunxi]: [sunxi-ehci3]: probe, pdev->name: sunxi-ehci, pdev->id: 3, sunxi_ehci: 0xc0e2d56c
[sunxi_hci_sunxi]: [sunxi-ehci3]: open clock, is_open: 0
[sunxi_hci_sunxi]: [sunxi-ehci3]: open hci clock,usbc_no:3, is_ohci:0
[sunxi_hci_sunxi]: [sunxi-ehci3]: Set USB Power ON
sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf0a02000
sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
ehci_irq: highspeed device connect
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc0e2d260
[sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
[sunxi_hci_sunxi]: [sunxi-ohci1]: open hci clock,usbc_no:1, is_ohci:1
sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf0a00400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
[sunxi_hci_sunxi]: [sunxi-ohci3]: probe, pdev->name: sunxi-ohci, pdev->id: 3, sunxi_ohci: 0xc0e2d670
[sunxi_hci_sunxi]: [sunxi-ohci3]: open clock, is_open: 0
[sunxi_hci_sunxi]: [sunxi-ohci3]: open hci clock,usbc_no:3, is_ohci:1
sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 5
sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf0a02400
hub 1-1:1.0: USB hub found
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
USB Serial support registered for GSM modem (1-port)
usb 3-1: new high-speed USB device number 2 using sunxi-ehci
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
sunxi_rtc_init(736): sunxi rtc device register!
rtc_gettime(323): read time 2015-10-20 12:26:49
alarm_gettime(460): get alarm time 2015-10-20 17:40:53 success!
rtc_gettime(323): read time 2015-10-20 12:26:49
rtc0 rtc0: rtc core: registered rtc0 as rtc0
sunxi_rtc_probe(690)!
sunxi cedar version 0.1
[cedar]: install start!!!
[cedar]: install end!!!
axp22_aldo1: Failed to create debugfs directory
axp15_dcdc4: Failed to create debugfs directory
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI Realtek H5 protocol initialized
autohotplug_init init ok
[cpu_freq] INF: merge_cluster_tables: index: 0, freq: 1800000
[cpu_freq] INF: merge_cluster_tables: index: 1, freq: 1704000
[cpu_freq] INF: merge_cluster_tables: index: 2, freq: 1608000
[cpu_freq] INF: merge_cluster_tables: index: 3, freq: 1512000
[cpu_freq] INF: merge_cluster_tables: index: 4, freq: 1416000
[cpu_freq] INF: merge_cluster_tables: index: 5, freq: 1320000
[cpu_freq] INF: merge_cluster_tables: index: 6, freq: 1200000
[cpu_freq] INF: merge_cluster_tables: index: 7, freq: 1104000
[cpu_freq] INF: merge_cluster_tables: index: 8, freq: 1008000
[cpu_freq] INF: merge_cluster_tables: index: 9, freq: 912000
[cpu_freq] INF: merge_cluster_tables: index: 10, freq: 816000
[cpu_freq] INF: merge_cluster_tables: index: 11, freq: 720000
[cpu_freq] INF: merge_cluster_tables: index: 12, freq: 600000
[cpu_freq] INF: merge_cluster_tables: index: 13, freq: 600000
[cpu_freq] INF: merge_cluster_tables: index: 14, freq: 552000
[cpu_freq] INF: merge_cluster_tables: index: 15, freq: 504000
[cpu_freq] INF: merge_cluster_tables: index: 16, freq: 456000
[cpu_freq] INF: merge_cluster_tables: index: 17, freq: 408000
[cpu_freq] INF: merge_cluster_tables: index: 18, freq: 360000
[cpu_freq] INF: merge_cluster_tables: index: 19, freq: 300000
[cpu_freq] INF: merge_cluster_tables: index: 20, freq: 240000
[cpu_freq] INF: merge_cluster_tables: End, table: ee45f540, count: 21
axp22_dcdc3: Failed to create debugfs directory
axp15_dcdc1: Failed to create debugfs directory
[cpu_freq] INF: sunxi_cpufreq_init, get cpu frequency from sysconfig, l_max: 1200MHz, l_min: 480MHz, b_max: 1608MHz, b_min: 600MHz
[cpu_freq] INF: sunxi register cpufreq driver succeed
[cpu_freq] INF: sunxi register bL notifier succeed
[cpu_freq] INF: sunxi_cpufreq_init: done!
[mmc]: SD/MMC/SDIO Host Controller Driver(v1.76 2014-06-17 14:41) Compiled in Apr 11 2015 at 10:19:42
[mmc]: sunxi_mci_init
[mmc]: get mmc0's sdc_ex_dly_used failed,use default dly
[mmc]: get mmc1's sdc_ex_dly_used failed,use default dly
[mmc]: get mmc2's sdc_ex_dly_used failed,use default dly
[mmc]: MMC host used card: 0x7, boot card: 0x4, io_card 2
[mmc]: --B-sdc 2 - 48000000
[mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 Probe: base:0xf1c11000 irq:94 sg_cpu:ffdd2000(4e485000) ret 0.
[mmc]: --B-sdc 0 - 48000000
[mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc0 Probe: base:0xf1c0f000 irq:92 sg_cpu:ffdd1000(4e56c000) ret 0.
[mmc]: sdc0: no card detected, try to shutdown io voltage.
[mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: mclk 0xf6000418 0x8002000f
[mmc]: --B-sdc 1 - 48000000
[mmc]: mclk 0xf6000418 0x8002000e
[mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc1 Probe: base:0xf1c10000 irq:93 sg_cpu:ffdd0000(4e56e000) ret 0.
[mmc]: sdc1: no card detected, try to shutdown io voltage.
sunxi_leds driver init
request gpio230, ret=0
trigger_name:heartbeat
request gpio241, ret=0
trigger_name:cpu0
Registered led device: red:ph06:led1
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 52, RTO !!
Registered led device: green:ph17:led2
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 52, RTO !!
[mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
ledtrig-cpu: registered to indicate activity on CPUs
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 8, RTO !!
*******************Try sdio*******************
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 5, RTO !!
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 5, RTO !!
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 5, RTO !!
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 5, RTO !!
*******************Try sd *******************
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 55, RTO !!
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 55, RTO !!
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 55, RTO !!
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 2 err, cmd 55, RTO !!
*******************Try mmc*******************
[mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
axp device register ok and device_create_file ok
sunxi_snddaudio_init, line:222
sunxi_snddaudio_init, line:228, daudio_used:1
soc-audio soc-audio.4: ASoC machine snddaudio should use snd_soc_register_card()
[mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
input: headset as /devices/virtual/input/input1
[CODEC] speaker_val type err!
[mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
asoc: sndvir_audio s_i2s1 mapping ok
[mmc]: mclk 0xf6000418 0x8102000e
[mmc]: mclk 0xf6000418 0x81020008
soc-audio soc-audio.0: ASoC machine sndhdmi should use snd_soc_register_card()
asoc: sndhdmi sunxi-hdmiaudio.0 mapping ok
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
[mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
nfnl_acct: registering with nfnetlink.
[mmc]: sdc2 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[mmc]: mclk 0xf6000418 0x81420508
[mmc]: mclk 0xf6000418 0x81410509
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_set: protocol 6
IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[mmc]: sdc2 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
IPVS: Each connection entry needs 192 bytes at least
IPVS: Creating netns size=1248 id=0
IPVS: ipvs loaded.
mmc0: new high speed MMC card at address 0001
IPVS: [rr] scheduler registered.
IPVS: [wrr] scheduler registered.
mmcblk0: mmc0:0001 NCard 7.29 GiB
mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB
IPVS: [lc] scheduler registered.
IPVS: [wlc] scheduler registered.
mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB
IPVS: [lblc] scheduler registered.
IPVS: [lblcr] scheduler registered.
IPVS: [dh] scheduler registered.
mmcblk0: p1 p2
IPVS: [sh] scheduler registered.
IPVS: [sed] scheduler registered.
IPVS: [nq] scheduler registered.
IPVS: ftp: loaded support on port[0] = 21
IPVS: [sip] pe registered.
mmcblk0boot1: unknown partition table
IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
mmcblk0boot0: unknown partition table
ip_gre: GRE over IPv4 tunneling driver
*******************mmc init ok *******************
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
DCCP: Activated CCID 2 (TCP-like)
DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
sctp: Hash tables configured (established 65536 bind 43690)
NET: Registered protocol family 21
Registered RDS/tcp transport
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
registered taskstats version 1
[LCD]lcd_module_init
[LCD]lcd_module_init finish
[HDMI] debug to check 111 !!
[DISP] disp_get_hdmi,line:41: screen_id 0 do not support HDMI TYPE!
[DISP] bsp_disp_set_hdmi_func,line:1316: get hdmi0 failed!
axp15_bldo2: incomplete constraints, leaving on
axp15_bldo1: incomplete constraints, leaving on
axp15_aldo1: incomplete constraints, leaving on
axp15_dcdc4: incomplete constraints, leaving on
axp15_dcdc1: incomplete constraints, leaving on
axp22_ldoio1: incomplete constraints, leaving on
axp22_dc5ldo: incomplete constraints, leaving on
axp22_eldo3: incomplete constraints, leaving on
axp22_eldo2: incomplete constraints, leaving on
axp22_dldo2: incomplete constraints, leaving on
axp22_aldo3: incomplete constraints, leaving on
axp22_aldo2: incomplete constraints, leaving on
axp22_dcdc5: incomplete constraints, leaving on
axp22_dcdc4: incomplete constraints, leaving on
axp22_dcdc3: incomplete constraints, leaving on
axp22_dcdc1: incomplete constraints, leaving on
otg_wakelock_init: No USB transceiver found
rtc_gettime(323): read time 2015-10-20 12:26:51
rtc0 rtc0: setting system clock to 2015-10-20 12:26:51 UTC (1445344011)
input: sunxi-ths as /devices/virtual/input/input2
suxi_ths: Kernel Thermal management registered
suxi_ths: Kernel Thermal management registered
sunxi_ths_bind : thermal-budget-0
ths_zone trip = 60, adjust lower = 0, upper = 1
ths_zone trip = 75, adjust lower = 1, upper = 2
ths_zone trip = 85, adjust lower = 2, upper = 5
ths_zone trip = 95, adjust lower = 5, upper = 9
ths_zone trip = 105, adjust lower = 0, upper = 0
sunxi_ths_bind : thermal-budget-0
ths_zone trip = 105, adjust lower = 0, upper = 9
CPU Budget:Register notifier
CPU Budget:register Success
sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
ALSA device list:
#0: snddaudio
#1: sndhdmi
EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 384K
init: plymouth-upstart-bridge main process (1134) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1144) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1147) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (1137) terminated with status 5
systemd-udevd[1278]: starting version 204
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ap6xxx]: get power regulator failed.
gpio ap6xxx_wl_regon set val 1, act val 1
[ap6xxx]: sdio wifi power state: on
[mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
=========== WLAN placed in POWER ON ========
[mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: mclk 0xf6000414 0x80000000
[mmc]: mclk 0xf6000414 0x8002000e
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 1 err, cmd 52, RTO !!
uvcvideo: Found UVC 1.00 device SMI (2084:f37d)
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 1 err, cmd 52, RTO !!
[mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc]: *** sunxi_mci_dump_errinfo(L794): smc 1 err, cmd 8, RTO !!
*******************Try sdio*******************
[mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc]: mclk 0xf6000414 0x8102000e
[mmc]: mclk 0xf6000414 0x81010009
input: SMI as /devices/platform/sunxi-ehci.3/usb3/3-1/3-1:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.1)
[mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc2: new high speed SDIO card at address 0001
bcmsdh_register: Linux Kernel SDIO/MMC Driver
*******************sdio init ok*******************
bcm_wlan_get_oob_irq enter.
gpio [355] map to virq [3] ok
F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
DHD: dongle ram size is set to 294912(orig 294912) at 0x0
dhdsdio_probe: Disable prop_txstatus
wl_create_event_handler(): thread:wl_event_handler:70b started
tsk Enter, tsk = 0xecd213d8
p2p0: P2P Interface Registered
dhd_attach(): thread:dhd_watchdog_thread:71d started
dhd_attach(): thread:dhd_dpc:71f started
dhd_attach(): thread:dhd_sysioc:722 started
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
Dongle Host Driver, version 1.88.45.3 (r420671)
[ap6xxx]: get power regulator failed.
gpio ap6xxx_wl_regon set val 0, act val 0
axp15_cldo1: Failed to create debugfs directory
axp22_ldoio1: Failed to create debugfs directory
[ap6xxx]: sdio wifi power state: off
=========== WLAN placed in RESET ========
ir_fetch_sysconfig_para: IR power key type err!
input: sunxi-ir as /devices/virtual/input/s_cir0
gmac0: probed
gmac0 gmac0: eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (gmac0-0:00)
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
init: failsafe main process (2095) killed by TERM signal
axp pconf set pin [GPIO2] data to [1]
[LCD]open, step 0 finish
[LCD]open, step 1 finish
[LCD]open, step 2 finish
[DISP] disp_lcd_pwm_enable,line:1551: pwm device hdl is NULL
[LCD]open, step 3 finish
init: plymouth-upstart-bridge main process ended, respawning
init: tty1 main process (2581) killed by TERM signal
PHY: gmac0-0:00 - Link is Up - 1000/Full
eth0: no IPv6 routers present
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:2 item[1200000,4,1440000,4 0]
CPU Budget:update CPU 4 cpufreq max to 1440000 min to 600000
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]
CPU Budget: Limit state:1 item[1200000,4,1608000,4 0]
CPU Budget: Limit state:0 item[1200000,4,1800000,4 0]