dmesg - Test01-09262015
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-63-generic (buildd@lgw01-18) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #103-Ubuntu SMP Fri Aug 14 21:42:59 UTC 2015 (Ubuntu 3.13.0-63.103-generic 3.13.11-ckt25)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable
BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000caa23fff] usable
BIOS-e820: [mem 0x00000000caa24000-0x00000000caa67fff] reserved
BIOS-e820: [mem 0x00000000caa68000-0x00000000cadb6fff] usable
BIOS-e820: [mem 0x00000000cadb7000-0x00000000cade6fff] reserved
BIOS-e820: [mem 0x00000000cade7000-0x00000000cafe6fff] ACPI NVS
BIOS-e820: [mem 0x00000000cafe7000-0x00000000caffefff] ACPI data
BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. Precision M6600/0NVY5D, BIOS A15 09/27/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF8000000 write-back
3 base 0C8000000 mask FFC000000 write-back
4 base 0CB000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FE0000000 write-back
7 base 220000000 mask FF0000000 write-back
8 base 22E000000 mask FFE000000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 128MB, type WB
reg 3, base: 3200MB, range: 64MB, type WB
reg 4, base: 3248MB, range: 16MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
reg 8, base: 8928MB, range: 32MB, type UC
total RAM covered: 8080M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 128MB, type WB
reg 3, base: 3200MB, range: 64MB, type WB
reg 4, base: 3248MB, range: 16MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
reg 8, base: 8928MB, range: 32MB, type UC
e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f1c00-0x000f1c0f] mapped at [ffff8800000f1c00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x22de00000-0x22dffffff]
[mem 0x22de00000-0x22dffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22ddfffff]
[mem 0x22c000000-0x22ddfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xcaa23fff]
[mem 0x40200000-0xca9fffff] page 2M
[mem 0xcaa00000-0xcaa23fff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0xcaa68000-0xcadb6fff]
[mem 0xcaa68000-0xcadb6fff] page 4k
init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[mem 0xcafff000-0xcaffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35b00000-0x36d77fff]
ACPI: RSDP 00000000000fe300 000024 (v02 DELL )
ACPI: XSDT 00000000caffde18 00007C (v01 DELL CBX3 06222004 MSFT 00010013)
ACPI: FACP 00000000caf87d98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395)
ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20131115/tbfadt-522)
ACPI: DSDT 00000000caf54018 008A43 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
ACPI: FACS 00000000cafe4e40 000040
ACPI: APIC 00000000caffcf18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013)
ACPI: TCPA 00000000cafe5d18 000032 (v02 00000000 00000000)
ACPI: SSDT 00000000caf88a98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
ACPI: MCFG 00000000cafe5c98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
ACPI: HPET 00000000cafe5c18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
ACPI: BOOT 00000000cafe5b98 000028 (v01 DELL CBX3 06222004 AMI 00010013)
ACPI: SSDT 00000000caf6b018 000804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
ACPI: SSDT 00000000caf6a018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903)
ACPI: SLIC 00000000caf74c18 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
ACPI: SSDT 00000000caf72018 0018F8 (v01 NvdRef NvdTabl 00001000 INTL 20090903)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
Initmem setup node 0 [mem 0x00000000-0x22dffffff]
NODE_DATA [mem 0x22dff3000-0x22dff7fff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xcaa23fff]
node 0: [mem 0xcaa68000-0xcadb6fff]
node 0: [mem 0xcafff000-0xcaffffff]
node 0: [mem 0x100000000-0x22dffffff]
On node 0 totalpages: 2066701
DMA zone: 64 pages used for memmap
DMA zone: 153 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 12902 pages used for memmap
DMA32 zone: 825716 pages, LIFO batch:31
Normal zone: 19328 pages used for memmap
Normal zone: 1236992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xcaa24000-0xcaa67fff]
PM: Registered nosave memory: [mem 0xcadb7000-0xcade6fff]
PM: Registered nosave memory: [mem 0xcade7000-0xcafe6fff]
PM: Registered nosave memory: [mem 0xcafe7000-0xcaffefff]
PM: Registered nosave memory: [mem 0xcb000000-0xcb9fffff]
PM: Registered nosave memory: [mem 0xcba00000-0xcf9fffff]
PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
PM: Registered nosave memory: [mem 0xffc20000-0xffffffff]
e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88022dc00000 s81536 r8192 d20864 u131072
pcpu-alloc: s81536 r8192 d20864 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034254
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8031836K/8266804K available (7395K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 234968K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
NR_IRQS:16640 nr_irqs:808 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.462 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.92 BogoMIPS (lpj=9577848)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28590 entries in 112 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38311.39 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcade7000-0xcafe6fff] (2097152 bytes)
reboot: Dell Precision M6600 series board detected. Selecting PCI-method for reboots.
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 20:48:01, date: 09/24/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000cadd7798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: SSDT 00000000cadd8a98 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: SSDT 00000000cadd6d98 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0400000-0xf07fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x8000-0x803f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf25b0000-0xf25b000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x80e0-0x80e7]
pci 0000:00:16.3: reg 0x14: [mem 0xf2590000-0xf2590fff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf2580000-0xf2580fff]
pci 0000:00:19.0: reg 0x18: [io 0x8080-0x809f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf2570000-0xf25703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2560000-0xf2563fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf2550000-0xf25503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x80d0-0x80d7]
pci 0000:00:1f.2: reg 0x14: [io 0x80c0-0x80c3]
pci 0000:00:1f.2: reg 0x18: [io 0x80b0-0x80b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x80a0-0x80a3]
pci 0000:00:1f.2: reg 0x20: [io 0x8060-0x807f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2540000-0xf25407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2530000-0xf25300ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x8040-0x805f]
pci 0000:01:00.0: [10de:0e3a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xee000000-0xefffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x7000-0x707f]
pci 0000:01:00.0: reg 0x30: [mem 0xf0000000-0xf007ffff pref]
pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf0080000-0xf0083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xee000000-0xf00fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:422b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-09]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xf1900000-0xf22fffff]
pci 0000:00:1c.2: bridge window [mem 0xed200000-0xedbfffff 64bit pref]
pci 0000:0a:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xf2300000-0xf2301fff 64bit]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 0a]
pci 0000:00:1c.3: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:0b:00.0: [1217:11f7] type 00 class 0x0c0010
pci 0000:0b:00.0: reg 0x10: [mem 0xf0830000-0xf0830fff]
pci 0000:0b:00.0: supports D1 D2
pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.0: System wakeup disabled by ACPI
pci 0000:0b:00.1: [1217:8320] type 00 class 0x080501
pci 0000:0b:00.1: reg 0x10: [mem 0xf0820000-0xf08201ff]
pci 0000:0b:00.1: supports D1 D2
pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0b:00.2: [1217:8330] type 00 class 0x018000
pci 0000:0b:00.2: reg 0x10: [mem 0xf0810000-0xf08103ff]
pci 0000:0b:00.2: reg 0x18: [mem 0xf0800000-0xf08003ff]
pci 0000:0b:00.2: supports D1 D2
pci 0000:0b:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 0b-12]
pci 0000:00:1c.7: bridge window [io 0x2000-0x5fff]
pci 0000:00:1c.7: bridge window [mem 0xf0800000-0xf18fffff]
pci 0000:00:1c.7: bridge window [mem 0xec100000-0xed1fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcaa24000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] could not be reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
pnp 00:08: Plug and Play ACPI device, IDs DLL04a4 PNP0f13 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xee000000-0xf00fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-09]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xf1900000-0xf22fffff]
pci 0000:00:1c.2: bridge window [mem 0xed200000-0xedbfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0a]
pci 0000:00:1c.3: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b-12]
pci 0000:00:1c.7: bridge window [io 0x2000-0x5fff]
pci 0000:00:1c.7: bridge window [mem 0xf0800000-0xf18fffff]
pci 0000:00:1c.7: bridge window [mem 0xec100000-0xed1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xee000000-0xf00fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xf1900000-0xf22fffff]
pci_bus 0000:04: resource 2 [mem 0xed200000-0xedbfffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xf2300000-0xf23fffff]
pci_bus 0000:0b: resource 0 [io 0x2000-0x5fff]
pci_bus 0000:0b: resource 1 [mem 0xf0800000-0xf18fffff]
pci_bus 0000:0b: resource 2 [mem 0xec100000-0xed1fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18912K (ffff880035b00000 - ffff880036d78000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc6a24000-0xcaa24000] (64MB) mapped at [ffff8800c6a24000-ffff8800caa23fff]
Simple Boot Flag at 0xf3 set to 0x1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1443127682.192:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15724
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004f80000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
0000:00:16.3: ttyS4 at I/O 0x80e0 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf2570000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xf2550000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-63-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0a:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 48 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
usb usb3: SerialNumber: 0000:0a:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-63-generic xhci_hcd
usb usb4: SerialNumber: 0000:0a:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e253281fe265ee3ceafcaa3f292e212b95f0359a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:731:852
rtc_cmos 00:05: setting system clock to 2015-09-24 20:48:03 UTC (1443127683)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 784K (ffff88000173c000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[158]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PTP clock support registered
sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8320] (rev 5)
sdhci-pci 0000:0b:00.1: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:0b:00.1: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2540000 port 0xf2540100 irq 49
ata2: SATA max UDMA/133 abar m2048@0xf2540000 port 0xf2540180 irq 49
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf2540000 port 0xf2540280 irq 49
ata5: SATA max UDMA/133 abar m2048@0xf2540000 port 0xf2540300 irq 49
ata6: SATA max UDMA/133 abar m2048@0xf2540000 port 0xf2540380 irq 49
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
firewire_ohci 0000:0b:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:67:e5:3e:95:73
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1041FF-0FF
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-9: SanDisk SDSSDA240G, Z22000RL, max UDMA/133
ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDA24 Z220 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:0b:00.0: created device fw0: GUID 02211b014a4fc000, S400
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new full-speed USB device number 3 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: HGST HTS545032A7E380, GGBOACA0, max UDMA/100
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA HGST HTS545032A7 GGBO PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
tsc: Refined TSC clocksource calibration: 2394.559 MHz
usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: DW375 Bluetooth Module
usb 1-1.4: Manufacturer: Dell Computer Corp
usb 1-1.4: SerialNumber: 446D57CA608B
usb 2-1.2: new full-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Receiver
usb 2-1.2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input8
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input9
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A102, max UDMA/133
usb 2-1.8: new full-speed USB device number 4 using ehci-pci
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS30N A102 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1.8: config 0 has an invalid interface number: 3 but max is 2
usb 2-1.8: config 0 has no interface number 2
usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: 5880
usb 2-1.8: Manufacturer: Broadcom Corp
usb 2-1.8: SerialNumber: 0123456789ABCD
usb 2-1.8: config 0 descriptor??
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 104 bits of entropy available
init: plymouth-upstart-bridge main process (286) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (295) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (299) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (301) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (304) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 4088536k swap on /dev/sda2. Priority:-1 extents:1 across:4088536k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[385]: starting version 204
random: nonblocking pool is initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:07: [io 0x0378-0x037b]
parport_pc 00:07: [irq 5]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
wmi: Mapper loaded
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: irq 52 for MSI/MSI-X
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
device-mapper: multipath: version 1.6.0 loaded
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Dock Mic=0xf
Internal Mic=0x11
Mic=0xa
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 580000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
hda-intel 0000:01:00.1: Enable delay in RIRB handling
iwlwifi 0000:03:00.0: Direct firmware load failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.VID_ handle
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda1): re-mounted. Opts: data=ordered
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
parport_pc 00:07: activated
parport_pc 00:07: reported by Plug and Play ACPI
parport_pc 00:07: disabled
input: Dell WMI hotkeys as /devices/virtual/input/input14
i915 0000:00:02.0: irq 54 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
fbcon: inteldrmfb (fb0) is primary device
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
nouveau 0000:01:00.0: enabling device (0004 -> 0007)
ACPI: Video Device [VID] (multi-head: yes rom: yes post: no)
init: failsafe main process (669) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
systemd-hostnamed[747]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
acpi device:2c: registered as cooling_device9
e1000e 0000:00:19.0: irq 50 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/LNXVIDEO:00/input/input19
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
acpi device:3c: registered as cooling_device10
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input20
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.VID_.GPSP 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.VID_.GPSP 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c4d00a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF104 (NVC4)
nouveau [ DEVICE][0000:01:00.0] Family : NVC0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PROM
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 70.04.3a.01.01
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
nouveau [ MXM][0000:01:00.0] BIOS version 3.0
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
nouveau [ MXM][0000:01:00.0] MXMS Version 3.0
nouveau 0000:01:00.0: irq 55 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 880000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 03: core 50 MHz memory 135 MHz
nouveau [ CLK][0000:01:00.0] 07: core 73 MHz memory 324 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 450 MHz memory 1250 MHz
nouveau [ CLK][0000:01:00.0] --: core 73 MHz memory 324 MHz
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 4026790 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 03: 080153d6 0f220020
nouveau [ DRM] DCB outp 04: 08015392 00020020
nouveau [ DRM] DCB outp 05: 080143c6 0f220010
nouveau [ DRM] DCB outp 06: 08014382 00020010
nouveau [ DRM] DCB outp 10: 020273a6 0f220010
nouveau [ DRM] DCB outp 11: 02027362 00020010
nouveau [ DRM] DCB conn 00: 00000040
nouveau [ DRM] DCB conn 01: 00001161
nouveau [ DRM] DCB conn 02: 00001231
nouveau [ DRM] DCB conn 03: 01000331
nouveau [ DRM] DCB conn 04: 01000446
nouveau [ DRM] DCB conn 05: 02000546
nouveau [ DRM] DCB conn 06: 00010631
nouveau [ DRM] DCB conn 07: 00010746
nouveau [ DRM] DCB conn 08: 00020846
nouveau [ DRM] DCB conn 09: 00000900
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] ACPI backlight interface available, not registering our own
nouveau [ DRM] MM: using COPY1 for buffer copies
nouveau 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88021e9aa800
nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=154b, idProduct=007a
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: USB 2.0 FD
usb 3-1: Manufacturer: PNY Technologies
usb 3-1: SerialNumber: AEB19H13YE07001125
usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 31405824 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
systemd-hostnamed[3659]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
systemd-hostnamed[5783]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
usb 3-1: USB disconnect, device number 2
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
systemd-hostnamed[8732]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[10999]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.1: new high-speed USB device number 5 using ehci-pci
usb 2-1.1: New USB device found, idVendor=154b, idProduct=007a
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: USB 2.0 FD
usb 2-1.1: Manufacturer: PNY Technologies
usb 2-1.1: SerialNumber: AEB19H13YE07001125
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi7 : usb-storage 2-1.1:1.0
scsi 7:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 31405824 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1.1: USB disconnect, device number 5
usb 2-1.1: new high-speed USB device number 6 using ehci-pci
usb 2-1.1: New USB device found, idVendor=154b, idProduct=007a
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: USB 2.0 FD
usb 2-1.1: Manufacturer: PNY Technologies
usb 2-1.1: SerialNumber: AEB19H13YE07001125
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-1.1:1.0
scsi 8:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sdc] 31405824 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdc] No Caching mode page found
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] No Caching mode page found
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 8:0:0:0: [sdc] No Caching mode page found
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
usb 2-1.1: USB disconnect, device number 6
perf samples too long (5049 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
usb 2-1.1: new high-speed USB device number 7 using ehci-pci
usb 2-1.1: New USB device found, idVendor=154b, idProduct=007a
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: USB 2.0 FD
usb 2-1.1: Manufacturer: PNY Technologies
usb 2-1.1: SerialNumber: AEB19H13YE07001125
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 2-1.1:1.0
scsi 9:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] 31405824 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdc] No Caching mode page found
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] No Caching mode page found
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 9:0:0:0: [sdc] No Caching mode page found
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[31184]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-1: new high-speed USB device number 3 using xhci_hcd
usb 3-1: New USB device found, idVendor=1004, idProduct=6300
usb 3-1: New USB device strings: Mfr=1, Product=4, SerialNumber=0
usb 3-1: Product: USB Charge Only Interface
usb 3-1: Manufacturer: LG Electronics Inc.
usbhid 3-1:1.0: couldn't find an input interrupt endpoint
usb 3-1: USB disconnect, device number 3
usb 3-1: new high-speed USB device number 4 using xhci_hcd
usb 3-1: New USB device found, idVendor=1004, idProduct=633e
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: LGE Android Phone
usb 3-1: Manufacturer: LG Electronics Inc.
usb 3-1: SerialNumber: LGH810e6703908
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
usb 3-1: USB disconnect, device number 4
usb 2-1.1: USB disconnect, device number 7
usb 2-1.1: new high-speed USB device number 8 using ehci-pci
usb 2-1.1: New USB device found, idVendor=154b, idProduct=007a
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: USB 2.0 FD
usb 2-1.1: Manufacturer: PNY Technologies
usb 2-1.1: SerialNumber: AEB19H13YE07001125
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 2-1.1:1.0
usb 2-1.1: USB disconnect, device number 8
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
usb 2-1.1: new high-speed USB device number 9 using ehci-pci
usb 2-1.1: New USB device found, idVendor=03f0, idProduct=3307
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: v125w
usb 2-1.1: Manufacturer: HP
usb 2-1.1: SerialNumber: UTa11355000C59
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi11 : usb-storage 2-1.1:1.0
scsi 11:0:0:0: Direct-Access HP v125w 0.00 PQ: 0 ANSI: 2
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdc] 7892040 512-byte logical blocks: (4.04 GB/3.76 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 11:0:0:0: [sdc] Asking for cache data failed
sd 11:0:0:0: [sdc] Assuming drive cache: write through
sd 11:0:0:0: [sdc] Asking for cache data failed
sd 11:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 11:0:0:0: [sdc] Asking for cache data failed
sd 11:0:0:0: [sdc] Assuming drive cache: write through
sd 11:0:0:0: [sdc] Attached SCSI removable disk
systemd-hostnamed[7270]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-1.1: USB disconnect, device number 9
FAT-fs (sdc1): unable to read boot sector to mark fs as dirty
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
systemd-hostnamed[17814]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
HDMI: invalid ELD data byte 0
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
irq 17: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 1014 Comm: Xorg Tainted: P OX 3.13.0-63-generic #103-Ubuntu
Hardware name: Dell Inc. Precision M6600/0NVY5D, BIOS A15 09/27/2013
ffff880221e92ea4 ffff88022dc03e68 ffffffff81723cc0 ffff880221e92e00
ffff88022dc03e90 ffffffff810c2282 ffff880221e92e00 0000000000000011
0000000000000000 ffff88022dc03ed0 ffffffff810c27bc 0000000000000011
Call Trace:
[] dump_stack+0x45/0x56
[] __report_bad_irq+0x32/0xd0
[] note_interrupt+0x24c/0x2a0
[] handle_irq_event_percpu+0xd9/0x1d0
[] handle_irq_event+0x3d/0x60
[] handle_fasteoi_irq+0x5a/0x100
[] handle_irq+0x1e/0x30
[] do_IRQ+0x4d/0xc0
[] common_interrupt+0x6d/0x6d
[] ? system_call_fastpath+0x1a/0x1f
handlers:
[] usb_hcd_irq
Disabling IRQ #17
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
perf samples too long (10041 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
hda-intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
hda-intel 0000:01:00.1: Enabling via VGA-switcheroo