dmesg - unigine-heaven
Initializing cgroup subsys cpuset
Linux version 4.1.7-1-ck (squishy@ease) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Sun Sep 13 14:40:23 EDT 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd8fefff] usable
BIOS-e820: [mem 0x00000000bd8ff000-0x00000000bec7efff] reserved
BIOS-e820: [mem 0x00000000bec7f000-0x00000000bef61fff] usable
BIOS-e820: [mem 0x00000000bef62000-0x00000000bef7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bef7f000-0x00000000beffefff] ACPI data
BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP EliteBook 8570w/176B, BIOS 68IAV Ver. F.43 10/08/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x43e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FF800000 mask FFF800000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask FC0000000 write-back
6 base 43E000000 mask FFE000000 uncachable
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b2b000, 0x01b2bfff] PGTABLE
BRK [0x01b2c000, 0x01b2cfff] PGTABLE
BRK [0x01b2d000, 0x01b2dfff] PGTABLE
init_memory_mapping: [mem 0x43de00000-0x43dffffff]
[mem 0x43de00000-0x43dffffff] page 2M
BRK [0x01b2e000, 0x01b2efff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43ddfffff]
[mem 0x420000000-0x43ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbd8fefff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbd7fffff] page 2M
[mem 0xbd800000-0xbd8fefff] page 4k
init_memory_mapping: [mem 0xbec7f000-0xbef61fff]
[mem 0xbec7f000-0xbef61fff] page 4k
BRK [0x01b2f000, 0x01b2ffff] PGTABLE
BRK [0x01b30000, 0x01b30fff] PGTABLE
init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[mem 0xbefff000-0xbeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x378d6000-0x37c62fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F2F10 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BEFFE120 0000A4 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 0x00000000BEFFC000 00010C (v05 HPQOEM 176B 0000000F HP 00000001)
ACPI: DSDT 0x00000000BEFD6000 020792 (v02 HPQOEM 176B 00000001 INTL 20110112)
ACPI: FACS 0x00000000BEC34000 000040
ACPI: FACS 0x00000000BEC34000 000040
ACPI: HPET 0x00000000BEFFB000 000038 (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: APIC 0x00000000BEFFA000 0000BC (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: MCFG 0x00000000BEFF9000 00003C (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: TCPA 0x00000000BEFF7000 000032 (v02 HPQOEM 176B 00000000 HP 00000001)
ACPI: SSDT 0x00000000BEFD3000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
ACPI: SSDT 0x00000000BEFD2000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
ACPI: SLIC 0x00000000BEFD1000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: MSDM 0x00000000BEFD0000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
ACPI: FPDT 0x00000000BEFCF000 000044 (v01 HPQOEM 176B 00000001 HP 00000001)
ACPI: BGRT 0x00000000BEFCE000 000038 (v00 HPQOEM 176B 00000001 HP 00000001)
ACPI: SSDT 0x00000000BEFCD000 000E42 (v01 HPQOEM ATIGFX 00000001 INTL 20110112)
ACPI: SSDT 0x00000000BEFCA000 0009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
ACPI: SSDT 0x00000000BEFC9000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
ACPI: DMAR 0x00000000BEFC8000 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0x00000000BEFF8000 0000A5 (v32 HPQOEM 176B 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043dffffff]
NODE_DATA(0) allocated [mem 0x43dfed000-0x43dff0fff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042d600000-ffff88043d5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bd8fefff]
node 0: [mem 0x00000000bec7f000-0x00000000bef61fff]
node 0: [mem 0x00000000befff000-0x00000000beffffff]
node 0: [mem 0x0000000100000000-0x000000043dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043dffffff]
On node 0 totalpages: 4176767
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12080 pages used for memmap
DMA32 zone: 773091 pages, LIFO batch:31
Normal zone: 53120 pages used for memmap
Normal zone: 3399680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd8ff000-0xbec7efff]
PM: Registered nosave memory: [mem 0xbef62000-0xbef7efff]
PM: Registered nosave memory: [mem 0xbef7f000-0xbeffefff]
PM: Registered nosave memory: [mem 0xbf000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88043dc00000 s93016 r8192 d29864 u262144
pcpu-alloc: s93016 r8192 d29864 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4111482
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16362340K/16707068K available (5594K kernel code, 885K rwdata, 1724K rodata, 1172K init, 1152K bss, 344728K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.799 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.59 BogoMIPS (lpj=2693799)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a04000 - ffffffff81a09000)
ftrace: allocating 21347 entries in 84 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000bec0f000 end: 0x000000bec2efff
IOAPIC id 0 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (43100.78 BogoMIPS)
BFS LOCALITY CPU 0 to 1: 1
BFS LOCALITY CPU 0 to 2: 2
BFS LOCALITY CPU 0 to 3: 2
BFS LOCALITY CPU 0 to 4: 2
BFS LOCALITY CPU 0 to 5: 2
BFS LOCALITY CPU 0 to 6: 2
BFS LOCALITY CPU 0 to 7: 2
BFS LOCALITY CPU 1 to 2: 2
BFS LOCALITY CPU 1 to 3: 2
BFS LOCALITY CPU 1 to 4: 2
BFS LOCALITY CPU 1 to 5: 2
BFS LOCALITY CPU 1 to 6: 2
BFS LOCALITY CPU 1 to 7: 2
BFS LOCALITY CPU 2 to 3: 1
BFS LOCALITY CPU 2 to 4: 2
BFS LOCALITY CPU 2 to 5: 2
BFS LOCALITY CPU 2 to 6: 2
BFS LOCALITY CPU 2 to 7: 2
BFS LOCALITY CPU 3 to 4: 2
BFS LOCALITY CPU 3 to 5: 2
BFS LOCALITY CPU 3 to 6: 2
BFS LOCALITY CPU 3 to 7: 2
BFS LOCALITY CPU 4 to 5: 1
BFS LOCALITY CPU 4 to 6: 2
BFS LOCALITY CPU 4 to 7: 2
BFS LOCALITY CPU 5 to 6: 2
BFS LOCALITY CPU 5 to 7: 2
BFS LOCALITY CPU 6 to 7: 1
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbef62000-0xbef7efff] (118784 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:36:30, date: 09/19/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ACF2000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ACE9C00 000303 (v01 PmRef ApIst 00003000 INTL 20110112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042ACDCE00 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [COMP] (off)
ACPI: Power Resource [LPP] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd4420000-0xd442ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd4435000-0xd443500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd4400000-0xd441ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd443b000-0xd443bfff]
pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd443a000-0xd443a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd4430000-0xd4433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd4439000-0xd44393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5068-0x506f]
pci 0000:00:1f.2: reg 0x14: [io 0x5074-0x5077]
pci 0000:00:1f.2: reg 0x18: [io 0x5060-0x5067]
pci 0000:00:1f.2: reg 0x1c: [io 0x5070-0x5073]
pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd4438000-0xd44387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd4434000-0xd44340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
pci 0000:01:00.0: [1002:682d] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd4300000-0xd433ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd4340000-0xd4343fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd42fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:24:00.0: reg 0x10: [mem 0xd4100000-0xd41007ff]
pci 0000:24:00.0: reg 0x14: [mem 0xd4105000-0xd41050ff]
pci 0000:24:00.1: [197b:2392] type 00 class 0x088000
pci 0000:24:00.1: reg 0x10: [mem 0xd4104000-0xd41040ff]
pci 0000:24:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
pci 0000:24:00.2: [197b:2391] type 00 class 0x080501
pci 0000:24:00.2: reg 0x10: [mem 0xd4103000-0xd41030ff]
pci 0000:00:1c.2: PCI bridge to [bus 24]
pci 0000:00:1c.2: bridge window [mem 0xd4100000-0xd41fffff]
pci 0000:25:00.0: [8086:0085] type 00 class 0x028000
pci 0000:25:00.0: reg 0x10: [mem 0xd4000000-0xd4001fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:25:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 25]
pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd40fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd8ff000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbef62000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43e000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [io 0x0200-0x027f] has been reserved
system 00:02: [io 0x1000-0x100f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0xef80-0xef9f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN019b SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 7 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:24:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000 add_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4500000-0xd46fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd4360000-0xd437ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd4300000-0xd43fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd42fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xd4500000-0xd46fffff 64bit pref]
pci 0000:24:00.1: BAR 6: assigned [mem 0xd4108000-0xd410ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 24]
pci 0000:00:1c.2: bridge window [mem 0xd4100000-0xd41fffff]
pci 0000:00:1c.3: PCI bridge to [bus 25]
pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd40fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xd4200000-0xd42fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd3ffffff]
pci_bus 0000:03: resource 2 [mem 0xd4500000-0xd46fffff 64bit pref]
pci_bus 0000:24: resource 1 [mem 0xd4100000-0xd41fffff]
pci_bus 0000:25: resource 1 [mem 0xd4000000-0xd40fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:14.0: enabling device (0000 -> 0002)
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3636K (ffff8800378d6000 - ffff880037c63000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb98ff000-0xbd8ff000] (64MB) mapped at [ffff8800b98ff000-ffff8800bd8fefff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than reserved [mem 0xfed10000-0xfed13fff]
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at arch/x86/mm/ioremap.c:202 __ioremap_caller+0x2c2/0x3b0()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in:
CPU: 2 PID: 1 Comm: BFS/0 Not tainted 4.1.7-1-ck #1
Hardware name: Hewlett-Packard HP EliteBook 8570w/176B, BIOS 68IAV Ver. F.43 10/08/2013
0000000000000000 00000000cd394d3b ffff88042b5afad8 ffffffff8156bdbc
0000000000000000 ffff88042b5afb30 ffff88042b5afb18 ffffffff81077a2a
ffff88042b5afb48 ffffc90001b78000 00000000fed16000 0000000000006000
Call Trace:
[] dump_stack+0x4c/0x6e
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_fmt+0x55/0x70
[] __ioremap_caller+0x2c2/0x3b0
[] ioremap_nocache+0x17/0x20
[] snb_uncore_imc_init_box+0x79/0xb0
[] uncore_pci_probe+0xd5/0x230
[] local_pci_probe+0x42/0xa0
[] ? pci_match_device+0xe5/0x110
[] pci_device_probe+0x101/0x160
[] driver_probe_device+0x209/0x4c0
[] __driver_attach+0x9b/0xa0
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x73/0xc0
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x180/0x250
[] ? uncore_types_exit+0x26/0x26
[] driver_register+0x64/0xf0
[] __pci_register_driver+0x4b/0x50
[] intel_uncore_init+0xc8/0x2af
[] ? uncore_types_exit+0x26/0x26
[] do_one_initcall+0xb8/0x200
[] kernel_init_freeable+0x174/0x215
[] ? rest_init+0x90/0x90
[] kernel_init+0xe/0x100
[] ret_from_fork+0x42/0x70
[] ? rest_init+0x90/0x90
---[ end trace 217bf65a0b9e2851 ]---
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x16
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler bfq registered
BFQ I/O-scheduler: v7r8
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pci 0000:24:00.1: Signaling PME through PCIe PME interrupt
pci 0000:24:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 15:193:631
rtc_cmos 00:03: setting system clock to 2015-09-19 11:36:32 UTC (1442662592)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1172K (ffffffff818df000 - ffffffff81a04000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 540K (ffff880001579000 - ffff880001600000)
Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
BFS CPU scheduler v0.464 by Con Kolivas.
random: systemd-tmpfile urandom read with 7 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd443a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4439000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd4438000 port 0xd4438100 irq 31
ata2: SATA max UDMA/133 abar m2048@0xd4438000 port 0xd4438180 irq 31
ata3: SATA max UDMA/133 abar m2048@0xd4438000 port 0xd4438200 irq 31
ata4: SATA max UDMA/133 abar m2048@0xd4438000 port 0xd4438280 irq 31
ata5: SATA max UDMA/133 abar m2048@0xd4438000 port 0xd4438300 irq 31
ata6: SATA max UDMA/133 abar m2048@0xd4438000 port 0xd4438380 irq 31
firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
sdhci-pci 0000:24:00.1: No vmmc regulator found
sdhci-pci 0000:24:00.1: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
usb 3-3: new full-speed USB device number 2 using xhci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer Naga Hex as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:1532:0036.0001/input/input5
hid-generic 0003:1532:0036.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Naga Hex] on usb-0000:00:14.0-3/input0
input: Razer Razer Naga Hex as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:1532:0036.0002/input/input6
firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400
hid-generic 0003:1532:0036.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Naga Hex] on usb-0000:00:14.0-3/input1
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2693.881 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4aa266ff, max_idle_ns: 440795313891 ns
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: READ LOG DMA EXT failed, trying unqueued
ata3.00: disabling queued TRIM support
ata3.00: ATA-9: Crucial_CT240M500SSD3, MU05, max UDMA/133
ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-8: ST500LM021-1KJ152, 0002LIM1, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
ata3.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdd] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
ata3.00: Enabling discard_zeroes_data
sda: sda1 sda2
sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: zramswap.service: Cannot add dependency job, ignoring: Unit zramswap.service failed to load: No such file or directory.
systemd[1]: Reached target RPC Port Mapper.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Host and Network Name Lookups.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Temporary Directory...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 206 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Temporary Directory.
FS-Cache: Loaded
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Set Up Additional Binary Formats.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
FS-Cache: Netfs 'nfs' registered for caching
systemd[1]: Started Load/Save Random Seed.
usbip_core: USB/IP Core v1.0.0
usbcore: registered new device driver usbip-host
usbip_host: USB/IP Host Driver v1.0.0
systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: systemd-modules-load.service: Unit entered failed state.
systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Configuration File System...
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
random: nonblocking pool is initialized
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input10
hp_accel: laptop model unknown, using default axes configuration
ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
acpi device:01: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PTP clock support registered
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:25:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[drm] radeon kernel modesetting enabled.
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:25:00.0: L1 Enabled - LTR Disabled
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (VERDE 0x1002:0x682D 0x103C:0x176B).
[drm] register mmio base: 0xD4300000
[drm] register mmio size: 262144
ATOM BIOS: HP
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 8184016 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller without fan control
[drm] probing gen 2 caps for device 8086:151 = 261ad03/e
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:151 = 261ad03/e
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
wl: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
systemd[1]: Started Journal Service.
systemd-journald[197]: Received request to flush runtime journal from PID 1
lis3lv02d: 8 bits 3DC sensor found
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:44:fd:69:b5:1a
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ACPI Warning: SystemIO range 0x000000000000EF80-0x000000000000EF9F conflicts with OpRegion 0x000000000000EF80-0x000000000000EF8F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Mic=0xc
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
snd_hda_codec_idt hdaudioC0D0: Line=0xf
input: PC Speaker as /devices/platform/pcspkr/input/input13
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
wmi: Mapper loaded
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwlwifi 0000:25:00.0 wlo1: renamed from wlan0
e1000e 0000:00:19.0 enp0s25: renamed from eth0
Non-volatile memory driver v1.3
input: HP WMI hotkeys as /devices/virtual/input/input19
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
iwlwifi 0000:25:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
thermal LNXTHERM:00: registered as thermal_zone1
ACPI: Thermal Zone [CPUZ] (48 C)
iwlwifi 0000:25:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
mousedev: PS/2 mouse device common for all mice
thermal LNXTHERM:01: registered as thermal_zone2
ACPI: Thermal Zone [GFXZ] (52 C)
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8804212aec00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8804212aec04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8804212aec08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8804212aec0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8804212aec10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90002035a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input12
thermal LNXTHERM:02: registered as thermal_zone3
ACPI: Thermal Zone [EXTZ] (46 C)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23
thermal LNXTHERM:03: registered as thermal_zone4
ACPI: Thermal Zone [LOCZ] (46 C)
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dfe)
psmouse serio4: synaptics: queried max coordinates: x [..5648], y [..4806]
psmouse serio4: synaptics: queried min coordinates: x [1292..], y [1048..]
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 10 usecs
[drm] ring test on 4 succeeded in 3 usecs
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input24
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00, board id: 2009, fw id: 1119621
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input22
thermal LNXTHERM:04: registered as thermal_zone5
ACPI: Thermal Zone [BATZ] (28 C)
thermal LNXTHERM:05: registered as thermal_zone6
ACPI: Thermal Zone [PCHZ] (127 C)
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-2
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DP-3
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY2
[drm] Connector 4:
[drm] VGA-1
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
cfg80211: Calling CRDA to update world regulatory domain
[drm] fb mappable at 0xC047A000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
wlo1: authenticate with 44:ce:7d:28:e8:8c
wlo1: send auth to 44:ce:7d:28:e8:8c (try 1/3)
wlo1: authenticated
wlo1: associate with 44:ce:7d:28:e8:8c (try 1/3)
wlo1: RX AssocResp from 44:ce:7d:28:e8:8c (capab=0x411 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
fuse init (API version 7.23)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: Enabling discard_zeroes_data
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
typefind:sink[6058]: segfault at 7f8dab4d816c ip 00007f8ed4652e80 sp 00007f8ed5dd52e0 error 4 in libcairo.so.2.11400.2[7f8ed461a000+12a000]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
sdd:
traps: pool[16423] trap divide error ip:7f4e53caf135 sp:7f4e257f9520 error:0 in libical.so.1.0.1[7f4e53c83000+5a000]
sdd:
raid6: sse2x1 gen() 9109 MB/s
raid6: sse2x1 xor() 7220 MB/s
raid6: sse2x2 gen() 11781 MB/s
raid6: sse2x2 xor() 8435 MB/s
raid6: sse2x4 gen() 13507 MB/s
raid6: sse2x4 xor() 10371 MB/s
raid6: using algorithm sse2x4 gen() 13507 MB/s
raid6: .... xor() 10371 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 13304.000 MB/sec
Btrfs loaded
BTRFS: device label TransVideo devid 1 transid 3 /dev/sdd1
BTRFS info (device sdd1): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: flagging fs with big metadata feature
BTRFS info (device sdd1): disk space caching is enabled
BTRFS: has skinny extents
usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 33 00 00 08
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI disk