dmesg - benchmark_150920
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-28-generic (buildd@lgw01-21) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #30~14.04.1-Ubuntu SMP Tue Sep 1 09:32:55 UTC 2015 (Ubuntu 3.19.0-28.30~14.04.1-generic 3.19.8-ckt5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x00000000781e6fff] usable
BIOS-e820: [mem 0x00000000781e7000-0x00000000787e6fff] reserved
BIOS-e820: [mem 0x00000000787e7000-0x00000000788e6fff] ACPI NVS
BIOS-e820: [mem 0x00000000788e7000-0x0000000078926fff] ACPI data
BIOS-e820: [mem 0x0000000078927000-0x00000000794c4fff] usable
BIOS-e820: [mem 0x00000000794c5000-0x0000000079dc4fff] ACPI NVS
BIOS-e820: [mem 0x0000000079dc5000-0x0000000079ffffff] usable
BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Acer Aspire E3-111/Roxy, BIOS V1.35 06/18/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07C000000 mask FFC000000 uncachable
3 base 07B000000 mask FFF000000 uncachable
4 base 07AE00000 mask FFFE00000 uncachable
5 base 100000000 mask F80000000 write-back
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[mem 0x17fe00000-0x17fffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x160000000-0x17fdfffff]
[mem 0x160000000-0x17fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1effffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1effffff] page 2M
init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[mem 0x1f100000-0x1f1fffff] page 4k
[mem 0x1f200000-0x1fffffff] page 2M
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0x20100000-0x781e6fff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x77ffffff] page 2M
[mem 0x78000000-0x781e6fff] page 4k
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0x78927000-0x794c4fff]
[mem 0x78927000-0x789fffff] page 4k
[mem 0x78a00000-0x793fffff] page 2M
[mem 0x79400000-0x794c4fff] page 4k
init_memory_mapping: [mem 0x79dc5000-0x79ffffff]
[mem 0x79dc5000-0x79dfffff] page 4k
[mem 0x79e00000-0x79ffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x15fffffff]
[mem 0x100000000-0x15fffffff] page 2M
RAMDISK: [mem 0x34818000-0x36403fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
ACPI: XSDT 0x0000000078926120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013)
ACPI: FACP 0x000000007891E000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: DSDT 0x0000000078911000 008C16 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: FACS 0x00000000788A0000 000040
ACPI: UEFI 0x0000000078925000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: UEFI 0x0000000078923000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SSDT 0x000000007891F000 0030C1 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: HPET 0x000000007891D000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: LPIT 0x000000007891C000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: APIC 0x000000007891B000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: MCFG 0x000000007891A000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x0000000078910000 0005D6 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007890E000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007890D000 0007DB (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007890C000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000007890B000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000007890A000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: CSRT 0x0000000078909000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
ACPI: SSDT 0x0000000078908000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: FPDT 0x0000000078907000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
NODE_DATA(0) allocated [mem 0x17fff5000-0x17fff9fff]
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x17fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x1effffff]
node 0: [mem 0x1f100000-0x1fffffff]
node 0: [mem 0x20100000-0x781e6fff]
node 0: [mem 0x78927000-0x794c4fff]
node 0: [mem 0x79dc5000-0x79ffffff]
node 0: [mem 0x100000000-0x17fffffff]
Initmem setup node 0 [mem 0x00001000-0x17fffffff]
On node 0 totalpages: 1019229
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7671 pages used for memmap
DMA32 zone: 490944 pages, LIFO batch:31
Normal zone: 8192 pages used for memmap
Normal zone: 524288 pages, LIFO batch:31
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0x781e7000-0x787e6fff]
PM: Registered nosave memory: [mem 0x787e7000-0x788e6fff]
PM: Registered nosave memory: [mem 0x788e7000-0x78926fff]
PM: Registered nosave memory: [mem 0x794c5000-0x79dc4fff]
PM: Registered nosave memory: [mem 0x7a000000-0x7a7fffff]
PM: Registered nosave memory: [mem 0x7a800000-0x7adfffff]
PM: Registered nosave memory: [mem 0x7ae00000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88017fc00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003281
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3899628K/4076916K available (7918K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 177288K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Maximum core-clock to bus-clock ratio: 0x1a
Resolved frequency ID: 0, frequency: 83200 KHz
TSC runs at 2163200 KHz
lapic_timer_frequency = 332800
tsc: Detected 2163.200 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=8652800)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30014 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU N3530 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal monitoring handled by SMI
#3[ 0.158416] CPU3: Thermal monitoring handled by SMI
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17305.60 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x787e7000-0x788e6fff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0x794c5000-0x79dc4fff] (9437184 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 0:14:09, date: 09/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A65B000 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A65B800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A6AFE00 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A6F2000 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PC05] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0x2048-0x204f]
pci 0000:00:13.0: reg 0x14: [io 0x205c-0x205f]
pci 0000:00:13.0: reg 0x18: [io 0x2040-0x2047]
pci 0000:00:13.0: reg 0x1c: [io 0x2058-0x205b]
pci 0000:00:13.0: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:13.0: reg 0x24: [mem 0x9091d000-0x9091d7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90919000-0x9091901f]
pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90607fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x781e7000-0x7bffffff]
e820: reserve RAM buffer [mem 0x794c5000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved
system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
Switched to clocksource acpi_pm
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28592K (ffff880034818000 - ffff880036404000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x741e7000-0x781e7000] (64MB) mapped at [ffff8800741e7000-ffff8800781e6fff]
microcode: CPU0 sig=0x30678, pf=0x8, revision=0x829
microcode: CPU1 sig=0x30678, pf=0x8, revision=0x829
microcode: CPU2 sig=0x30678, pf=0x8, revision=0x829
microcode: CPU3 sig=0x30678, pf=0x8, revision=0x829
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1442708050.055:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x37
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (36 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-28-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-28-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 294dc012706f48b7cddf6374e2d79fe1b0609269'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 15:684:203
acpi device:2b: hash matches
rtc_cmos 00:00: setting system clock to 2015-09-20 00:14:10 UTC (1442708050)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[120]: starting version 204
wmi: Mapper loaded
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: controller can't do DEVSLP, turning off
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[drm] Initialized drm 1.1.0 20060810
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90004782000, c4:54:44:a2:85:b6, XID 0c000800 IRQ 263
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0x9091d000 port 0x9091d100 irq 262
ata2: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (a0000 10000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-2: new high-speed USB device number 2 using xhci_hcd
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb: failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
usb 1-2-port1: failed to peer to usb2-port1 (-16)
usb: port power management may be unreliable
usb: failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
usb 1-2-port2: failed to peer to usb2-port1 (-16)
usb: failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
ata1.00: supports DRM functions and may not be fully accessible
usb 1-2-port3: failed to peer to usb2-port1 (-16)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
usb: failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
usb 1-2-port4: failed to peer to usb2-port1 (-16)
ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-4: new high-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=04f2, idProduct=b47f
usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-4: Product: VGA Webcam
usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-4: SerialNumber: 0x0001
usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2166.666 MHz
usb 1-2.1: New USB device found, idVendor=0489, idProduct=e055
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.1: Product: BCM43142A0
usb 1-2.1: Manufacturer: Broadcom Corp
usb 1-2.1: SerialNumber: F82FA8AF46B6
usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB OPTICAL MOUSE
usb 1-2.2: Manufacturer: PIXART
usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0001/input/input6
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2.2/input0
Switched to clocksource tsc
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 19 bits of entropy available
systemd-udevd[321]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
audit: type=1400 audit(1442675654.182:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=403 comm="apparmor_parser"
audit: type=1400 audit(1442675654.182:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
audit: type=1400 audit(1442675654.182:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
audit: type=1400 audit(1442675654.182:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
audit: type=1400 audit(1442675654.182:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
audit: type=1400 audit(1442675654.182:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
uvcvideo: Found UVC 1.00 device VGA Webcam (04f2:b47f)
usbcore: registered new interface driver btusb
input: VGA Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=0000 lmp_ver=06 lmp_subver=210b
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x1b
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
input: SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-8/i2c-SYN1B7D:01/0018:06CB:2991.0002/input/input10
wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
hid-multitouch 0018:06CB:2991.0002: input,hidraw1: HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input12
random: nonblocking pool is initialized
input: Acer BMA150 accelerometer as /devices/virtual/input/input13
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=00cd lmp_ver=06 lmp_subver=210b
init: failsafe main process (691) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1442675655.274:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=815 comm="apparmor_parser"
audit: type=1400 audit(1442675655.274:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=815 comm="apparmor_parser"
audit: type=1400 audit(1442675655.274:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=815 comm="apparmor_parser"
audit: type=1400 audit(1442675655.450:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1442675655.450:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1442675655.450:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1442675655.454:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=895 comm="apparmor_parser"
audit: type=1400 audit(1442675655.454:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=895 comm="apparmor_parser"
audit: type=1400 audit(1442675655.454:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=895 comm="apparmor_parser"
audit: type=1400 audit(1442675655.454:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=895 comm="apparmor_parser"
audit: type=1400 audit(1442675655.454:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=895 comm="apparmor_parser"
audit: type=1400 audit(1442675655.458:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=895 comm="apparmor_parser"
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit: type=1400 audit(1442675655.494:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="pxgsettings" pid=895 comm="apparmor_parser"
init: cinnamon main process (982) terminated with status 127
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1226) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-hostnamed[1987]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
audit_printk_skb: 123 callbacks suppressed
audit: type=1400 audit(1442676922.284:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23571 comm="apparmor_parser"
audit: type=1400 audit(1442676922.284:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23571 comm="apparmor_parser"
audit: type=1400 audit(1442676922.284:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23571 comm="apparmor_parser"
perf interrupt took too long (4068 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-2-port2: disabled by hub (EMI?), re-enabling...
usb 1-2.2: USB disconnect, device number 5
usb 1-2.2: new low-speed USB device number 6 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB OPTICAL MOUSE
usb 1-2.2: Manufacturer: PIXART
usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0003/input/input14
hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2.2/input0
perf interrupt took too long (5018 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
usb 1-2-port2: disabled by hub (EMI?), re-enabling...
usb 1-2.2: USB disconnect, device number 6
usb 1-2.2: new low-speed USB device number 7 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB OPTICAL MOUSE
usb 1-2.2: Manufacturer: PIXART
usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0004/input/input15
hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2.2/input0
usb 1-2-port2: disabled by hub (EMI?), re-enabling...
usb 1-2.2: USB disconnect, device number 7
usb 1-2.2: new low-speed USB device number 8 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB OPTICAL MOUSE
usb 1-2.2: Manufacturer: PIXART
usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:093A:2510.0005/input/input16
hid-generic 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-2.2/input0
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection
intel_powerclamp: Start idle injection to reduce power
intel_powerclamp: Stop forced idle injection