dmesg - sandy_01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.51-custom (d-man@boomer) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #1 SMP Tue Sep 8 22:05:07 EDT 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cedf9fff] usable
BIOS-e820: [mem 0x00000000cedfa000-0x00000000cee3dfff] reserved
BIOS-e820: [mem 0x00000000cee3e000-0x00000000cf1b6fff] usable
BIOS-e820: [mem 0x00000000cf1b7000-0x00000000cf1e6fff] reserved
BIOS-e820: [mem 0x00000000cf1e7000-0x00000000cf3e6fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf3e7000-0x00000000cf3fefff] ACPI data
BIOS-e820: [mem 0x00000000cf3ff000-0x00000000cf3fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. OptiPlex 990/0D6H9T, BIOS A10 11/24/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x42e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 0CF400000 mask FFFC00000 uncachable
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask E00000000 write-back
6 base 400000000 mask FE0000000 write-back
7 base 420000000 mask FF0000000 write-back
8 base 42E000000 mask FFE000000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3316MB, range: 4MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
reg 7, base: 16896MB, range: 256MB, type WB
reg 8, base: 17120MB, range: 32MB, type UC
total RAM covered: 16348M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3316MB, range: 4MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 512MB, type WB
reg 7, base: 16896MB, range: 256MB, type WB
reg 8, base: 17120MB, range: 32MB, type UC
e820: update [mem 0xcf400000-0xcf7fffff] usable ==> reserved
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf400 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f1f20-0x000f1f2f] mapped at [ffff8800000f1f20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008b000] 8b000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdb000, 0x01fdbfff] PGTABLE
BRK [0x01fdc000, 0x01fdcfff] PGTABLE
BRK [0x01fdd000, 0x01fddfff] PGTABLE
init_memory_mapping: [mem 0x42de00000-0x42dffffff]
[mem 0x42de00000-0x42dffffff] page 2M
BRK [0x01fde000, 0x01fdefff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42ddfffff]
[mem 0x42c000000-0x42ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
[mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcedf9fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcebfffff] page 2M
[mem 0xcec00000-0xcedf9fff] page 4k
init_memory_mapping: [mem 0xcee3e000-0xcf1b6fff]
[mem 0xcee3e000-0xcf1b6fff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0xcf3ff000-0xcf3fffff]
[mem 0xcf3ff000-0xcf3fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x35bca000-0x36ddcfff]
ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL )
ACPI: XSDT 0x00000000CF3FDE18 00007C (v01 DELL CBX3 06222004 MSFT 00010013)
ACPI: FACP 0x00000000CF377D98 0000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xCF3D4E40/0x00000000CF3D4D40, using 32-bit address (20131218/tbfadt-271)
ACPI: DSDT 0x00000000CF361018 007341 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
ACPI: FACS 0x00000000CF3D4E40 000040
ACPI: APIC 0x00000000CF3FCF18 0000CC (v02 DELL CBX3 06222004 MSFT 00010013)
ACPI: TCPA 0x00000000CF3D5D18 000032 (v02 00000000 00000000)
ACPI: SSDT 0x00000000CF378A98 0002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
ACPI: MCFG 0x00000000CF3D5C98 00003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
ACPI: HPET 0x00000000CF3D5C18 000038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
ACPI: BOOT 0x00000000CF3D5B98 000028 (v01 DELL CBX3 06222004 AMI 00010013)
ACPI: SSDT 0x00000000CF36E018 000846 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
ACPI: SSDT 0x00000000CF36D018 000996 (v01 PmRef CpuPm 00003000 INTL 20090903)
ACPI: DMAR 0x00000000CF3D4A18 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: SLIC 0x00000000CF376C18 000176 (v03 DELL CBX3 06222004 MSFT 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042dffffff]
Initmem setup node 0 [mem 0x00000000-0x42dffffff]
NODE_DATA [mem 0x42dfea000-0x42dfeefff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041d600000-ffff88042d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00090fff]
node 0: [mem 0x00100000-0xcedf9fff]
node 0: [mem 0xcee3e000-0xcf1b6fff]
node 0: [mem 0xcf3ff000-0xcf3fffff]
node 0: [mem 0x100000000-0x42dffffff]
On node 0 totalpages: 4182276
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 13190 pages used for memmap
DMA32 zone: 844148 pages, LIFO batch:31
Normal zone: 52096 pages used for memmap
Normal zone: 3334144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcedfa000-0xcee3dfff]
PM: Registered nosave memory: [mem 0xcf1b7000-0xcf1e6fff]
PM: Registered nosave memory: [mem 0xcf1e7000-0xcf3e6fff]
PM: Registered nosave memory: [mem 0xcf3e7000-0xcf3fefff]
PM: Registered nosave memory: [mem 0xcf400000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffc1ffff]
PM: Registered nosave memory: [mem 0xffc20000-0xffffffff]
e820: [mem 0xcf400000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88042dc00000 s81728 r8192 d20672 u131072
pcpu-alloc: s81728 r8192 d20672 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116905
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16363980K/16729104K available (7430K kernel code, 1121K rwdata, 3520K rodata, 1336K init, 1448K bss, 365124K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:808 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.416 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.83 BogoMIPS (lpj=13569664)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e68000 - ffffffff81e6f000)
ftrace: allocating 28689 entries in 113 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000cf1c6000 end: 0x000000cf1d5fff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54278.65 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcf1e7000-0xcf3e6fff] (2097152 bytes)
reboot: Dell OptiPlex 990 series board detected. Selecting PCI-method for reboots.
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:47:45, date: 09/16/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 0x00000000CF1D7798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
ACPI: SSDT 0x00000000CF1D8A98 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20090903)
ACPI: SSDT 0x00000000CF1D6D98 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20090903)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe15b0000-0xe15b000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x40a0-0x40a7]
pci 0000:00:16.3: reg 0x14: [mem 0xe1590000-0xe1590fff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe1500000-0xe151ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe1580000-0xe1580fff]
pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xe1570000-0xe15703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe1560000-0xe1563fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe1550000-0xe15503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x4090-0x4097]
pci 0000:00:1f.2: reg 0x14: [io 0x4080-0x4083]
pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077]
pci 0000:00:1f.2: reg 0x1c: [io 0x4060-0x4063]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe1540000-0xe15407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe1530000-0xe15300ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xe1420000-0xe143ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x30: [mem 0xe1400000-0xe141ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xe1400000-0xe14fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff]
pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcedfa000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf1b7000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf400000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42e000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xe1400000-0xe14fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe13fffff]
pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xe0a00000-0xe13fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18508K (ffff880035bca000 - ffff880036ddd000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcadfa000-0xcedfa000] (64MB) mapped at [ffff8800cadfa000-ffff8800cedf9fff]
Simple Boot Flag at 0xf3 set to 0x1
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x23
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x23
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1442440065.440:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31997
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0x40a0 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:08: 1.2 TPM (device-id 0x0, rev-id 78)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1570000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.51-custom ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1550000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.51-custom ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: bb99f3b9fe50acdaf451f82a4e286357f5dc57be'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
regulator-dummy: disabling
Magic number: 15:684:803
rtc_cmos 00:05: setting system clock to 2015-09-16 21:47:45 UTC (1442440065)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1a000 - ffffffff81e68000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 752K (ffff880001744000 - ffff880001800000)
Freeing unused kernel memory: 576K (ffff880001b70000 - ffff880001c00000)
systemd-udevd[160]: starting version 204
pps_core: module verification failed: signature and/or required key missing - tainting kernel
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:4c:2e:ab
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe1540000 port 0xe1540100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xe1540000 port 0xe1540180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST3500413AS, JC49, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM01B6Q, max UDMA/133
ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC49 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 EXM0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3392.293 MHz
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=04d9, idProduct=a070
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Gaming Mouse
usb 2-1.5: Manufacturer: Sun Sonny
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.6: new low-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=060b, idProduct=2312
usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.6: Product: Gaming Keyboard
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:060B:2312.0004/input/input5
hid-generic 0003:060B:2312.0004: input,hidraw0: USB HID v1.11 Keyboard [Gaming Keyboard] on usb-0000:00:1d.0-1.6/input0
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:060B:2312.0005/input/input6
hid-generic 0003:060B:2312.0005: input,hidraw1: USB HID v1.11 Keyboard [Gaming Keyboard] on usb-0000:00:1d.0-1.6/input1
Switched to clocksource tsc
random: lvm urandom read with 121 bits of entropy available
random: nonblocking pool is initialized
EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
EXT4-fs (sdb1): write access will be enabled during recovery
EXT4-fs (sdb1): orphan cleanup on readonly fs
EXT4-fs (sdb1): 45 orphan inodes deleted
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
bio: create slab at 1
init: plymouth-upstart-bridge main process (279) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (289) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (292) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (294) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (296) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 9154556k swap on /dev/sda5. Priority:-1 extents:1 across:9154556k FS
Adding 7811068k swap on /dev/mapper/DEB-swap. Priority:-2 extents:1 across:7811068k FS
systemd-udevd[461]: starting version 204
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport0: PC-style at 0x378 (0x778)
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20131218/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
audit: type=1400 audit(1442440069.037:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1442440069.037:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1442440069.037:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1442440069.037:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1442440069.037:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1442440069.037:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
AVX version of gcm_enc/dec engaged.
kvm: module has bad taint, not creating trace events
snd_hda_codec: module has bad taint, not creating trace events
snd_hda_intel: module has bad taint, not creating trace events
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 15627 MBytes.
[fglrx] vendor: 1002 device: 68f9 revision: 0 count: 1
[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
hda_codec: ALC269VB: SKU not ready 0x411111f0
autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x19
Front Mic=0x18
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: Sun Sonny USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:04D9:A070.0001/input/input11
holtek_mouse 0003:04D9:A070.0001: input,hidraw2: USB HID v1.10 Keyboard [Sun Sonny USB Gaming Mouse] on usb-0000:00:1d.0-1.5/input0
input: Sun Sonny USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:04D9:A070.0002/input/input12
holtek_mouse 0003:04D9:A070.0002: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Sun Sonny USB Gaming Mouse] on usb-0000:00:1d.0-1.5/input1
holtek_mouse 0003:04D9:A070.0003: hiddev0,hidraw4: USB HID v1.10 Device [Sun Sonny USB Gaming Mouse] on usb-0000:00:1d.0-1.5/input2
[PCSPP,TRISTATE]
parport0: irq 7 detected
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
lp0: using parport0 (polling).
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (826) killed by TERM signal
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1442440070.841:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=914 comm="apparmor_parser"
audit: type=1400 audit(1442440070.841:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=914 comm="apparmor_parser"
audit: type=1400 audit(1442440070.841:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=914 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (927) killed by HUP signal
init: cups main process ended, respawning
audit: type=1400 audit(1442440070.857:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=962 comm="apparmor_parser"
audit: type=1400 audit(1442440070.857:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=967 comm="apparmor_parser"
audit: type=1400 audit(1442440070.861:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=964 comm="apparmor_parser"
audit: type=1400 audit(1442440070.861:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=958 comm="apparmor_parser"
audit: type=1400 audit(1442440070.861:15): apparmor="STATUS" operation="profile_load" name="chromium" pid=958 comm="apparmor_parser"
audit: type=1400 audit(1442440070.861:16): apparmor="STATUS" operation="profile_replace" name="chromium" pid=958 comm="apparmor_parser"
audit: type=1400 audit(1442440070.861:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=959 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1fd offMax=0x1af8
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-upstart-bridge main process ended, respawning
fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1521
[fglrx] Firegl kernel thread PID: 1522
[fglrx] Firegl kernel thread PID: 1523
[fglrx] IRQ 46 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:1fff3000, size:d000
init: plymouth-splash main process (1555) terminated with status 1
cgroup: systemd-logind (899) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
init: bumblebeed main process (1592) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1603) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1615) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1625) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1640) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1648) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1656) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1664) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1679) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1692) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (1704) terminated with status 1
init: bumblebeed respawning too fast, stopped
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 138 callbacks suppressed
audit: type=1400 audit(1442440093.270:64): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2742 comm="apparmor_parser"
audit: type=1400 audit(1442440093.270:65): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2742 comm="apparmor_parser"
audit: type=1400 audit(1442440093.270:66): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2742 comm="apparmor_parser"
init: bumblebeed main process (2893) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2902) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2914) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2928) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2936) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2944) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2954) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2962) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2970) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2978) terminated with status 1
init: bumblebeed main process ended, respawning
init: bumblebeed main process (2986) terminated with status 1
init: bumblebeed respawning too fast, stopped
perf samples too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
audit: type=1400 audit(1442490188.162:67): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=6311 comm="apparmor_parser"
audit: type=1400 audit(1442490188.162:68): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=6311 comm="apparmor_parser"
audit: type=1400 audit(1442490188.166:69): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=6311 comm="apparmor_parser"
systemd-hostnamed[8075]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
audit: type=1400 audit(1442576264.486:70): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=13066 comm="apparmor_parser"
audit: type=1400 audit(1442576264.486:71): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=13066 comm="apparmor_parser"
audit: type=1400 audit(1442576264.486:72): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=13066 comm="apparmor_parser"
conftest[22653]: segfault at 0 ip 00000000004005c0 sp 00007ffdfe1d9f00 error 4 in conftest[400000+1000]
conftest[22682]: segfault at 0 ip 00007fcfb1a72216 sp 00007ffd77d9fd38 error 4 in libc-2.19.so[7fcfb1932000+1bb000]