dmesg - ram

Return To ram System Information

CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-49-generic (buildd@lgw01-52) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #65~14.04.1-Ubuntu SMP Wed Sep 9 10:03:23 UTC 2015 (Ubuntu 3.16.0-49.65~14.04.1-generic 3.16.7-ckt15)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdaa0fff] usable
BIOS-e820: [mem 0x00000000bdaa1000-0x00000000bdaa6fff] reserved
BIOS-e820: [mem 0x00000000bdaa7000-0x00000000bdbb9fff] usable
BIOS-e820: [mem 0x00000000bdbba000-0x00000000bdc0efff] reserved
BIOS-e820: [mem 0x00000000bdc0f000-0x00000000bdd07fff] usable
BIOS-e820: [mem 0x00000000bdd08000-0x00000000bdf0efff] reserved
BIOS-e820: [mem 0x00000000bdf0f000-0x00000000bdf17fff] usable
BIOS-e820: [mem 0x00000000bdf18000-0x00000000bdf1efff] reserved
BIOS-e820: [mem 0x00000000bdf1f000-0x00000000bdf62fff] usable
BIOS-e820: [mem 0x00000000bdf63000-0x00000000bdf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000bdf9f000-0x00000000bdfe2fff] usable
BIOS-e820: [mem 0x00000000bdfe3000-0x00000000bdffefff] ACPI data
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. Studio 1555/0C234M, BIOS A13 04/02/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 100000000 mask FC0000000 write-back
  3 base 0FFE00000 mask FFFE00000 write-protect
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f7900-0x000f790f] mapped at [ffff8800000f7900]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
 [mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
 [mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
 [mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbdaa0fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xbd9fffff] page 2M
 [mem 0xbda00000-0xbdaa0fff] page 4k
init_memory_mapping: [mem 0xbdaa7000-0xbdbb9fff]
 [mem 0xbdaa7000-0xbdbb9fff] page 4k
init_memory_mapping: [mem 0xbdc0f000-0xbdd07fff]
 [mem 0xbdc0f000-0xbdd07fff] page 4k
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0xbdf0f000-0xbdf17fff]
 [mem 0xbdf0f000-0xbdf17fff] page 4k
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
init_memory_mapping: [mem 0xbdf1f000-0xbdf62fff]
 [mem 0xbdf1f000-0xbdf62fff] page 4k
init_memory_mapping: [mem 0xbdf9f000-0xbdfe2fff]
 [mem 0xbdf9f000-0xbdfe2fff] page 4k
init_memory_mapping: [mem 0xbdfff000-0xbdffffff]
 [mem 0xbdfff000-0xbdffffff] page 4k
RAMDISK: [mem 0x35ac6000-0x36d5afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7850 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000BDFF786C 000074 (v01 DELL   QA09     06040000  LTP 00000000)
ACPI: FACP 0x00000000BDFE7000 0000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0x00000000BDFE8000 0072A6 (v02 Intel  CANTIGA  06040000 INTL 20061109)
ACPI: FACS 0x00000000BDF9EFC0 000040
ACPI: FACS 0x00000000BDF9EFC0 000040
ACPI: HPET 0x00000000BDFFED16 000038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0x00000000BDFFED4E 00003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BDFFED8A 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 0x00000000BDFFEDF2 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SLIC 0x00000000BDFFEE1A 000176 (v01 DELL   QA09     06040000  LTP 00000000)
ACPI: OSFR 0x00000000BDFFEF90 000070 (v01 DELL   DELL     06040000 ASL  00000061)
ACPI: SSDT 0x00000000BDFE6000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
ACPI: SSDT 0x00000000BDFE5000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
ACPI: SSDT 0x00000000BDFE4000 00020F (v01 PmRef  ApTst    00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
  NODE_DATA [mem 0x13fff8000-0x13fffcfff]
 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009bfff]
  node   0: [mem 0x00100000-0xbdaa0fff]
  node   0: [mem 0xbdaa7000-0xbdbb9fff]
  node   0: [mem 0xbdc0f000-0xbdd07fff]
  node   0: [mem 0xbdf0f000-0xbdf17fff]
  node   0: [mem 0xbdf1f000-0xbdf62fff]
  node   0: [mem 0xbdf9f000-0xbdfe2fff]
  node   0: [mem 0xbdfff000-0xbdffffff]
  node   0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1039578
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3995 pages, LIFO batch:0
  DMA32 zone: 12085 pages used for memmap
  DMA32 zone: 773439 pages, LIFO batch:31
  Normal zone: 4096 pages used for memmap
  Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdaa1000-0xbdaa6fff]
PM: Registered nosave memory: [mem 0xbdbba000-0xbdc0efff]
PM: Registered nosave memory: [mem 0xbdd08000-0xbdf0efff]
PM: Registered nosave memory: [mem 0xbdf18000-0xbdf1efff]
PM: Registered nosave memory: [mem 0xbdf63000-0xbdf9efff]
PM: Registered nosave memory: [mem 0xbdfe3000-0xbdffefff]
PM: Registered nosave memory: [mem 0xbe000000-0xffffffff]
e820: [mem 0xbe000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81408 r8192 d20992 u1048576
pcpu-alloc: s81408 r8192 d20992 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1023312
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3990972K/4158312K available (7630K kernel code, 1131K rwdata, 3616K rodata, 1352K init, 1300K bss, 167340K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16640 nr_irqs:512 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2394.256 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.51 BogoMIPS (lpj=9577024)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29275 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz (fam: 06, model: 17, stepping: 0a)
APIC calibration not consistent with PM-Timer: 351ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662682 (5852592)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9577.02 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbdf63000-0xbdf9efff] (245760 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  8:54:44, date: 09/15/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013956C800 000265 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139AA6000 000575 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880139522400 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013954E180 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0x1840-0x185f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfc504800-0xfc504bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfc500000-0xfc503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x1860-0x187f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x1880-0x189f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x18a0-0x18bf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfc504c00-0xfc504fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x14: [io  0x18e4-0x18e7]
pci 0000:00:1f.2: reg 0x18: [io  0x18e8-0x18ef]
pci 0000:00:1f.2: reg 0x1c: [io  0x18e0-0x18e3]
pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18df]
pci 0000:00:1f.2: reg 0x24: [mem 0xfc504000-0xfc5047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
pci 0000:01:00.0: [1002:9553] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 0x14: [io  0x2000-0x20ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfc000000-0xfc00ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfc010000-0xfc013fff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: [8086:4232] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf8000000-0xf8001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:08:00.0: [14e4:1698] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5:   bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:09:01.0: [1180:0832] type 00 class 0x0c0010
pci 0000:09:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:09:01.0: MMC cards are now supported by standard SDHCI controller
pci 0000:09:01.0: reg 0x10: [mem 0xfc200000-0xfc2007ff]
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.1: [1180:0822] type 00 class 0x080501
pci 0000:09:01.1: reg 0x10: [mem 0xfc200800-0xfc2008ff]
pci 0000:09:01.1: supports D1 D2
pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.2: [1180:0592] type 00 class 0x088000
pci 0000:09:01.2: reg 0x10: [mem 0xfc201000-0xfc2010ff]
pci 0000:09:01.2: supports D1 D2
pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.3: [1180:0852] type 00 class 0x088000
pci 0000:09:01.3: reg 0x10: [mem 0xfc201400-0xfc2014ff]
pci 0000:09:01.3: supports D1 D2
pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfc200000-0xfc2fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdbba000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdd08000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf18000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf63000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdfe3000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:01: [io  0x0400-0x047f] could not be reserved
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x0480-0x048f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x1000-0x107f] has been reserved
system 00:01: [io  0x1180-0x11ff] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0xfe00] has been reserved
system 00:01: [io  0x0900-0x097f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0200000-0xc02000ff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc020000-0xfc03ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.5:   bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci 0000:00:1e.0:   bridge window [mem 0xfc200000-0xfc2fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfc200000-0xfc2fffff]
pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:09: resource 10 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19028K (ffff880035ac6000 - ffff880036d5b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9aa1000-0xbdaa1000] (64MB) mapped at [ffff8800b9aa1000-ffff8800bdaa0fff]
Simple Boot Flag at 0x36 set to 0x1
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1442307283.544:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7832
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (63 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (61 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ02] (77 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xfc504800
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-49-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc504c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-49-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-49-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-49-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-49-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-49-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-49-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-49-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: edcfbf815a6ecabe5c350d4aaf8a8b80aea616b6'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 15:881:927
rtc_cmos 00:02: setting system clock to 2015-09-15 08:54:45 UTC (1442307285)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 548K (ffff880001777000 - ffff880001800000)
Freeing unused kernel memory: 480K (ffff880001b88000 - ffff880001c00000)
systemd-udevd[100]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
tg3.c:v3.137 (May 11, 2014)
ahci 0000:00:1f.2: version 3.0
mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
usb 1-6: new high-speed USB device number 2 using ehci-pci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504380 irq 45
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:f9:58:cc
tg3 0000:08:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci 0000:09:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 1-6: New USB device found, idVendor=0c45, idProduct=63eb
usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-6: Product: Laptop_Integrated_Webcam_2M
usb 1-6: Manufacturer: M092S-H00-9601-SC39E
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SanDisk SDSSDHP256G, X2306RL, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDHP2 6RL  PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:09:01.0: created device fw0: GUID 334fc0000d751e21, S400
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 39 bits of entropy available
init: plymouth-upstart-bridge main process (172) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
psmouse serio1: synaptics: queried max coordinates: x [..5836], y [..4908]
init: plymouth-upstart-bridge main process (182) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (185) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 0, fw id: 552693
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Adding 4097020k swap on /dev/sda6.  Priority:-1 extents:1 across:4097020k SSFS
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-udevd[326]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
audit: type=1400 audit(1442300087.097:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=435 comm="apparmor_parser"
audit: type=1400 audit(1442300087.097:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=435 comm="apparmor_parser"
audit: type=1400 audit(1442300087.097:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=435 comm="apparmor_parser"
ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (476) killed by HUP signal
init: cups main process ended, respawning
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
audit: type=1400 audit(1442300087.297:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
audit: type=1400 audit(1442300087.297:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
audit: type=1400 audit(1442300087.297:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
audit: type=1400 audit(1442300087.297:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
audit: type=1400 audit(1442300087.297:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
audit: type=1400 audit(1442300087.297:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=500 comm="apparmor_parser"
[drm] Initialized drm 1.1.0 20060810
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X
iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
random: nonblocking pool is initialized
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlwifi 0000:04:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
r592: driver successfully loaded
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x1028:0x02BE).
[drm] register mmio base: 0xFC000000
[drm] register mmio size: 65536
ATOM BIOS: BR32787
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 2006206 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV710 Microcode
r852: driver loaded successfully
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800b766cc00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800b766cc0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9001081c598
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 47 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   LVDS-1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_UNIPHY2
sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Internal Mic=0x13
sound hdaudioC0D0:      Mic=0xe
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
init: failsafe main process (662) killed by TERM signal
input: Dell WMI hotkeys as /devices/virtual/input/input11
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
iwlwifi 0000:04:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63eb)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:04:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:08:00.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] fb mappable at 0xD045E000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm]    pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
Non-volatile memory driver v1.3
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with f4:ca:e5:aa:ee:10
wlan0: send auth to f4:ca:e5:aa:ee:10 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:ca:e5:aa:ee:10 (try 1/3)
wlan0: RX AssocResp from f4:ca:e5:aa:ee:10 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit_printk_skb: 153 callbacks suppressed
audit: type=1400 audit(1442300117.937:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2129 comm="apparmor_parser"
audit: type=1400 audit(1442300117.937:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2129 comm="apparmor_parser"
audit: type=1400 audit(1442300117.937:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2129 comm="apparmor_parser"

Return To ram System Information