dmesg - tio
CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.0-kali1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.0.4-1+kali2 (2015-06-03)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000afcdcfff] usable
BIOS-e820: [mem 0x00000000afcdd000-0x00000000bce3efff] reserved
BIOS-e820: [mem 0x00000000bce3f000-0x00000000bcf7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf7f000-0x00000000bcffefff] ACPI data
BIOS-e820: [mem 0x00000000bcfff000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ff000fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20C5A08KCD/20C5A08KCD, BIOS J9ET96WW (2.16 ) 10/14/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00BE000000 mask 7FFE000000 uncachable
2 base 00BD000000 mask 7FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0xafcdd max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b12000, 0x01b12fff] PGTABLE
BRK [0x01b13000, 0x01b13fff] PGTABLE
BRK [0x01b14000, 0x01b14fff] PGTABLE
init_memory_mapping: [mem 0x23e400000-0x23e5fffff]
[mem 0x23e400000-0x23e5fffff] page 2M
BRK [0x01b15000, 0x01b15fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23e3fffff]
[mem 0x220000000-0x23e3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xafcdcfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xafbfffff] page 2M
[mem 0xafc00000-0xafcdcfff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35a68000-0x36d2bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BCFFE170 0000CC (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: FACP 0x00000000BCFF9000 00010C (v05 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: DSDT 0x00000000BCFE2000 011E6F (v01 LENOVO TP-J9 00002160 INTL 20120711)
ACPI: FACS 0x00000000BCF49000 000040
ACPI: DBGP 0x00000000BCFFC000 000034 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: ECDT 0x00000000BCFFB000 000052 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: HPET 0x00000000BCFF8000 000038 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: APIC 0x00000000BCFF7000 000098 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: MCFG 0x00000000BCFF6000 00003C (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: SSDT 0x00000000BCFF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 0x00000000BCFF4000 00044F (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 0x00000000BCFE1000 000920 (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BCFE0000 00078E (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCFDF000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCFDD000 0011FA (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 0x00000000BCFDC000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 0x00000000BCFDB000 00006E (v05 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: SSDT 0x00000000BCFDA000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: UEFI 0x00000000BCFD9000 000042 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: MSDM 0x00000000BCF42000 000055 (v03 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: ASF! 0x00000000BCFFD000 0000A5 (v32 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: BATB 0x00000000BCFD8000 000046 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: FPDT 0x00000000BCFD7000 000064 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: UEFI 0x00000000BCFD6000 0002E2 (v01 LENOVO TP-J9 00002160 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
NODE_DATA(0) allocated [mem 0x23e5fa000-0x23e5fdfff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236000000-ffff88023dbfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000afcdcfff]
node 0: [mem 0x0000000100000000-0x000000023e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff]
On node 0 totalpages: 2024057
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11188 pages used for memmap
DMA32 zone: 715997 pages, LIFO batch:31
Normal zone: 20376 pages used for memmap
Normal zone: 1304064 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xafcdd000-0xbce3efff]
PM: Registered nosave memory: [mem 0xbce3f000-0xbcf7efff]
PM: Registered nosave memory: [mem 0xbcf7f000-0xbcffefff]
PM: Registered nosave memory: [mem 0xbcfff000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xff000fff]
PM: Registered nosave memory: [mem 0xff001000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88023e200000 s87256 r8192 d31528 u262144
pcpu-alloc: s87256 r8192 d31528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1992408
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7871272K/8096228K available (5580K kernel code, 1025K rwdata, 1944K rodata, 1248K init, 832K bss, 224956K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.807 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.61 BogoMIPS (lpj=9179228)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81a3a000 - ffffffff81a40000)
ftrace: allocating 22431 entries in 88 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4712MQ CPU @ 2.30GHz (fam: 06, model: 3c, stepping: 03)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
#3
#4
CPU4 microcode updated early to revision 0x1c, date = 2014-07-03
#5
#6
CPU6 microcode updated early to revision 0x1c, date = 2014-07-03
#7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (36716.91 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbce3f000-0xbcf7efff] (1310720 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234FA3800 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234FA3000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802349CDC00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf2610000-0xf2613fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf2600000-0xf260ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2619000-0xf261900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf261e000-0xf261e3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2614000-0xf2617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf261d000-0xf261d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7088-0x708f]
pci 0000:00:1f.2: reg 0x14: [io 0x7094-0x7097]
pci 0000:00:1f.2: reg 0x18: [io 0x7080-0x7087]
pci 0000:00:1f.2: reg 0x1c: [io 0x7090-0x7093]
pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf261c000-0xf261c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2618000-0xf26180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:1341] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x6000-0x607f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf0ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
acpiphp: Slot [1] registered
pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xf1e00000-0xf1e00fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf1e00000-0xf25fffff]
pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf1d04000-0xf1d04fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf1d00000-0xf1d03fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf1d00000-0xf1dfffff]
pci 0000:05:00.0: [10ec:b723] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf1c00000-0xf1c03fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1cfffff]
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xafcdd000-0xafffffff]
e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x187f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN2006 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbfa00000-0xbfbfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfc00000-0xbfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf0ffffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf1e00000-0xf25fffff]
pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf1d00000-0xf1dfffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xbfa00000-0xbfbfffff]
pci_bus 0000:02: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xf1e00000-0xf25fffff]
pci_bus 0000:03: resource 2 [mem 0xf1400000-0xf1bfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf1d00000-0xf1dfffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf1cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19216K (ffff880035a68000 - ffff880036d2c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xabcdd000-0xafcdd000] (64MB) mapped at [ffff8800abcdd000-ffff8800afcdcfff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1c
microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1440567921.624:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2015-08-26 05:45:22 UTC (1440567922)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1248K (ffffffff81902000 - ffffffff81a3a000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 552K (ffff880001576000 - ffff880001600000)
Freeing unused kernel memory: 104K (ffff8800017e6000 - ffff880001800000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[99]: starting version 215
random: systemd-udevd urandom read with 9 bits of entropy available
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf261e000
libata version 3.00 loaded.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc90004ca0000, 68:f7:28:67:38:08, XID 10900800 IRQ 26
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.0-kali1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf261d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.0.0-kali1-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.0.0-kali1-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.0.0-kali1-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb: failed to peer usb4-port4 and usb3-port3 by location (usb4-port4:none) (usb3-port3:usb4-port3)
usb usb4-port4: failed to peer to usb3-port3 (-16)
usb: port power management may be unreliable
usb: failed to peer usb4-port6 and usb3-port3 by location (usb4-port6:none) (usb3-port3:usb4-port3)
usb usb4-port6: failed to peer to usb3-port3 (-16)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf261c000 port 0xf261c100 irq 28
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf261c000 port 0xf261c200 irq 28
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-2: new high-speed USB device number 2 using xhci_hcd
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-9: WDC WD5000LPVX-08V0TT5, 05.01A05, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATAPI: PLDS DVD-RW DU8A5SH, BU61, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-0 1A05 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH BU61 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-2: New USB device found, idVendor=2109, idProduct=2812
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB2.0 Hub
usb 3-2: Manufacturer: VIA Labs, Inc.
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 4-5: New USB device found, idVendor=2109, idProduct=0812
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB3.0 Hub
usb 4-5: Manufacturer: VIA Labs, Inc.
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 3-7: new full-speed USB device number 3 using xhci_hcd
usb 3-7: No LPM exit latency info found, disabling LPM.
usb 3-7: New USB device found, idVendor=0bda, idProduct=b728
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: Bluetooth Radio
usb 3-7: Manufacturer: Realtek
usb 3-7: SerialNumber: 00e04c000001
usb 3-2.2: new low-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2294.686 MHz
usb 3-2.2: New USB device found, idVendor=04ca, idProduct=0061
usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.2: Product: USB Optical Mouse
usb 3-2.2: Manufacturer: PixArt
usb 3-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:04CA:0061.0001/input/input2
hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.2/input0
usb 3-12: new high-speed USB device number 5 using xhci_hcd
usb 3-12: New USB device found, idVendor=0bda, idProduct=5719
usb 3-12: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-12: Product: Integrated Camera
usb 3-12: Manufacturer: J2QEAHF9E
usb 3-12: SerialNumber: 200901010001
usb 3-2.3: new low-speed USB device number 6 using xhci_hcd
usb 3-2.3: New USB device found, idVendor=046a, idProduct=0011
usb 3-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:046A:0011.0002/input/input3
hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-2.3/input0
Switched to clocksource tsc
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (38 C)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
fuse init (API version 7.23)
systemd-udevd[285]: starting version 215
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI: AC Adapter [AC] (on-line)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ACPI: Battery Slot [BAT0] (battery present)
EDAC MC: Ver: 3.0.0
EDAC ie31200: No ECC support
[drm] Initialized drm 1.1.0 20060810
kvm: disabled by bios
input: PC Speaker as /devices/platform/pcspkr/input/input6
kvm: disabled by bios
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS J9ET96WW (2.16 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad Edge E440, model 20C5A08KCD
thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
iTCO_vendor_support: vendor-support=0
cfg80211: Calling CRDA to update world regulatory domain
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
psmouse serio1: synaptics: queried max coordinates: x [..5044], y [..3398]
psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
psmouse serio1: synaptics: quirked min/max coordinates: x [1024..5045], y [2457..4832]
rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
rtl8723be 0000:05:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Internal Mic=0x1a
sound hdaudioC1D0: Mic=0x19
sound hdaudioC1D0: Enable sync_write for stable communication
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
nouveau ![ DEVICE][0000:01:00.0] unknown Maxwell chipset
nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x118010a2
nouveau E[ DRM] failed to create 0x00000080, -22
nouveau: probe of 0000:01:00.0 failed with error -22
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input14
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
usbcore: registered new interface driver btusb
fbcon: inteldrmfb (fb0) is primary device
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (0bda:5719)
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Adding 16190460k swap on /dev/sda5. Priority:-1 extents:1 across:16190460k FS
systemd-journald[326]: Received request to flush runtime journal from PID 1
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
Netfilter messages via NETLINK v0.30.
r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link down
r8169 0000:04:00.0 eth0: link up
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal