dmesg - dl120
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000092fff] usable
BIOS-e820: [mem 0x0000000000093000-0x0000000000093fff] reserved
BIOS-e820: [mem 0x0000000000094000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000636a3fff] usable
BIOS-e820: [mem 0x00000000636a4000-0x000000006bb23fff] reserved
BIOS-e820: [mem 0x000000006bb24000-0x000000006bb24fff] usable
BIOS-e820: [mem 0x000000006bb25000-0x000000006bba5fff] reserved
BIOS-e820: [mem 0x000000006bba6000-0x00000000784fefff] usable
BIOS-e820: [mem 0x00000000784ff000-0x00000000788fefff] reserved
BIOS-e820: [mem 0x00000000788ff000-0x00000000790fefff] type 20
BIOS-e820: [mem 0x00000000790ff000-0x00000000791fefff] reserved
BIOS-e820: [mem 0x00000000791ff000-0x000000007b5fefff] ACPI NVS
BIOS-e820: [mem 0x000000007b5ff000-0x000000007b7fefff] ACPI data
BIOS-e820: [mem 0x000000007b7ff000-0x000000007b7fffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by HP
efi: ACPI=0x7b7fe000 ACPI 2.0=0x7b7fe014 SMBIOS=0x788fb000
efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000093000) (0MB)
efi: mem01: type=0, attr=0xf, range=[0x0000000000093000-0x0000000000094000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000094000-0x00000000000a0000) (0MB)
efi: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001018000) (15MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000001018000-0x0000000001200000) (1MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002118000) (15MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000002118000-0x0000000025271000) (561MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000025271000-0x000000003ed00000) (410MB)
efi: mem08: type=4, attr=0xf, range=[0x000000003ed00000-0x000000003ed80000) (0MB)
efi: mem09: type=7, attr=0xf, range=[0x000000003ed80000-0x00000000636a4000) (585MB)
efi: mem10: type=0, attr=0xf, range=[0x00000000636a4000-0x000000006bb24000) (132MB)
efi: mem11: type=4, attr=0xf, range=[0x000000006bb24000-0x000000006bb25000) (0MB)
efi: mem12: type=6, attr=0x800000000000000f, range=[0x000000006bb25000-0x000000006bba6000) (0MB)
efi: mem13: type=4, attr=0xf, range=[0x000000006bba6000-0x000000006ecfc000) (49MB)
efi: mem14: type=7, attr=0xf, range=[0x000000006ecfc000-0x00000000717f8000) (42MB)
efi: mem15: type=4, attr=0xf, range=[0x00000000717f8000-0x0000000071886000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000071886000-0x00000000718a1000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000718a1000-0x0000000071913000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x0000000071913000-0x0000000071917000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x0000000071917000-0x000000007191c000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x000000007191c000-0x000000007191e000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x000000007191e000-0x000000007192f000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x000000007192f000-0x0000000071931000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x0000000071931000-0x0000000071944000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x0000000071944000-0x0000000071945000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x0000000071945000-0x0000000073155000) (24MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000073155000-0x0000000073156000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x0000000073156000-0x0000000076cff000) (59MB)
efi: mem28: type=7, attr=0xf, range=[0x0000000076cff000-0x00000000774b1000) (7MB)
efi: mem29: type=1, attr=0xf, range=[0x00000000774b1000-0x00000000774ff000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000774ff000-0x0000000077743000) (2MB)
efi: mem31: type=2, attr=0xf, range=[0x0000000077743000-0x000000007774d000) (0MB)
efi: mem32: type=3, attr=0xf, range=[0x000000007774d000-0x00000000784ff000) (13MB)
efi: mem33: type=6, attr=0x800000000000000f, range=[0x00000000784ff000-0x00000000788ff000) (4MB)
efi: mem34: type=5, attr=0x800000000000000f, range=[0x00000000788ff000-0x00000000790ff000) (8MB)
efi: mem35: type=0, attr=0xf, range=[0x00000000790ff000-0x00000000791ff000) (1MB)
efi: mem36: type=10, attr=0xf, range=[0x00000000791ff000-0x000000007b5ff000) (36MB)
efi: mem37: type=9, attr=0xf, range=[0x000000007b5ff000-0x000000007b7ff000) (2MB)
efi: mem38: type=4, attr=0xf, range=[0x000000007b7ff000-0x000000007b800000) (0MB)
efi: mem39: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
efi: mem40: type=11, attr=0x8000000000000000, range=[0x0000000080000000-0x0000000090000000) (256MB)
SMBIOS 2.8 present.
DMI: HP ProLiant DL120 Gen9, BIOS P86 05/06/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000480000000 mask 3FFF80000000 uncachable
2 base 008000000000 mask 3F8000000000 uncachable
3 base 010000000000 mask 3F0000000000 uncachable
4 base 038000000000 mask 3FE000000000 uncachable
5 base 00007C000000 mask 3FFFFC000000 uncachable
6 base 00007FC00000 mask 3FFFFFC00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01cf4000, 0x01cf4fff] PGTABLE
BRK [0x01cf5000, 0x01cf5fff] PGTABLE
BRK [0x01cf6000, 0x01cf6fff] PGTABLE
init_memory_mapping: [mem 0x47fe00000-0x47fffffff]
[mem 0x47fe00000-0x47fffffff] page 1G
init_memory_mapping: [mem 0x47c000000-0x47fdfffff]
[mem 0x47c000000-0x47fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x47bffffff]
[mem 0x400000000-0x47bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x636a3fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x635fffff] page 2M
[mem 0x63600000-0x636a3fff] page 4k
init_memory_mapping: [mem 0x6bb24000-0x6bb24fff]
[mem 0x6bb24000-0x6bb24fff] page 4k
BRK [0x01cf7000, 0x01cf7fff] PGTABLE
init_memory_mapping: [mem 0x6bba6000-0x784fefff]
[mem 0x6bba6000-0x6bbfffff] page 4k
[mem 0x6bc00000-0x783fffff] page 2M
[mem 0x78400000-0x784fefff] page 4k
BRK [0x01cf8000, 0x01cf8fff] PGTABLE
init_memory_mapping: [mem 0x7b7ff000-0x7b7fffff]
[mem 0x7b7ff000-0x7b7fffff] page 4k
BRK [0x01cf9000, 0x01cf9fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x36402000-0x371f8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B7FE014 000024 (v02 HP )
ACPI: XSDT 0x000000007B7E8188 0000F4 (v01 HP ProLiant 00000001 01000013)
ACPI: FACP 0x000000007B7F6000 00010C (v05 HP ProLiant 00000001 HP 00000001)
ACPI: DSDT 0x000000007B7E5000 002EC8 (v02 HP DSDT 00000002 HPAG 00020000)
ACPI: FACS 0x000000007B5D3000 000040
ACPI: UEFI 0x000000007B5E1000 000042 (v01 HP ProLiant 00000002 01000013)
ACPI: MCEJ 0x000000007B7FC000 000130 (v01 HP ProLiant 00000001 INTL 0100000D)
ACPI: SSDT 0x000000007B7FB000 000064 (v02 HP SpsNvs 00000002 INTL 20130328)
ACPI: HEST 0x000000007B7FA000 0000A8 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: BERT 0x000000007B7F9000 000030 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: ERST 0x000000007B7F8000 000230 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: EINJ 0x000000007B7F7000 000150 (v01 HP ProLiant 00000001 INTL 00000001)
ACPI: HPET 0x000000007B7F5000 000038 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: PMCT 0x000000007B7F4000 000064 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: WDDT 0x000000007B7F3000 000040 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: APIC 0x000000007B7F2000 000106 (v03 HP ProLiant 00000001 HP 00000001)
ACPI: MCFG 0x000000007B7F1000 00003C (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SLIT 0x000000007B7F0000 00002D (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SRAT 0x000000007B7EF000 0000E8 (v03 HP ProLiant 00000001 HP 00000001)
ACPI: SPMI 0x000000007B7EE000 000041 (v05 HP ProLiant 00000001 HP 00000001)
ACPI: RASF 0x000000007B7ED000 000030 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SPCR 0x000000007B7EC000 000050 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: MSCT 0x000000007B7EB000 00004E (v01 HP ProLiant 00000001 HP 00000001)
ACPI: BDAT 0x000000007B7EA000 000030 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: PCCT 0x000000007B7E9000 00006E (v01 HP ProLiant 00000001 HP 00000001)
ACPI: DMAR 0x000000007B7FD000 000220 (v01 HP ProLiant 00000001 HP 00000001)
ACPI: SSDT 0x000000007B7DF000 005B73 (v02 HP PCISSDT 00000002 HPAG 00020000)
ACPI: SSDT 0x000000007B7DE000 0001CB (v02 HP TIMESSDT 00000002 HPAG 00020000)
ACPI: SSDT 0x000000007B7DD000 0002F2 (v01 HP pmab 00000001 INTL 20130328)
ACPI: BGRT 0x000000007B7DC000 000038 (v01 HP ProLiant 00000002 HP 01000013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x0000 -> Node 0
SRAT: PXM 0 -> APIC 0x0004 -> Node 0
SRAT: PXM 0 -> APIC 0x0008 -> Node 0
SRAT: PXM 0 -> APIC 0x0002 -> Node 0
SRAT: PXM 0 -> APIC 0x0006 -> Node 0
SRAT: PXM 0 -> APIC 0x000a -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x47fffffff]
NUMA: Initialized distance table, cnt=1
Initmem setup node 0 [mem 0x00000000-0x47fffffff]
NODE_DATA [mem 0x47fff8000-0x47fffcfff]
[ffffea0000000000-ffffea000fbfffff] PMD -> [ffff88046f600000-ffff88047d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x47fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00092fff]
node 0: [mem 0x00094000-0x0009ffff]
node 0: [mem 0x00100000-0x636a3fff]
node 0: [mem 0x6bb24000-0x6bb24fff]
node 0: [mem 0x6bba6000-0x784fefff]
node 0: [mem 0x7b7ff000-0x7b7fffff]
node 0: [mem 0x100000000-0x47fffffff]
On node 0 totalpages: 4128669
DMA zone: 56 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 6216 pages used for memmap
DMA32 zone: 454655 pages, LIFO batch:31
Normal zone: 50176 pages used for memmap
Normal zone: 3670016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: X2APIC (apic_id[0x00] uid[0x00] enabled)
ACPI: X2APIC (apic_id[0x04] uid[0x04] enabled)
ACPI: X2APIC (apic_id[0x08] uid[0x08] enabled)
ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled)
ACPI: X2APIC (apic_id[0x06] uid[0x06] enabled)
ACPI: X2APIC (apic_id[0x0a] uid[0x0a] enabled)
ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1])
ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00093000-0x00093fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x636a4000-0x6bb23fff]
PM: Registered nosave memory: [mem 0x6bb25000-0x6bba5fff]
PM: Registered nosave memory: [mem 0x784ff000-0x788fefff]
PM: Registered nosave memory: [mem 0x788ff000-0x790fefff]
PM: Registered nosave memory: [mem 0x790ff000-0x791fefff]
PM: Registered nosave memory: [mem 0x791ff000-0x7b5fefff]
PM: Registered nosave memory: [mem 0x7b5ff000-0x7b7fefff]
PM: Registered nosave memory: [mem 0x7b800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xffffffff]
e820: [mem 0x90000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88047fc00000 s80896 r8192 d21504 u262144
pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4072198
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16040700K/16514676K available (5209K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 473976K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS:33024 nr_irqs:1136 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1598.079 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3196.15 BogoMIPS (lpj=6392316)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21623 entries in 85 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x00000079172000 end: 0x00000079174fff
dmar: RMRR base: 0x000000791eb000 end: 0x000000791eefff
dmar: RMRR base: 0x000000791db000 end: 0x000000791eafff
dmar: RMRR base: 0x00000063b24000 end: 0x00000067b23fff
dmar: RMRR base: 0x00000067b24000 end: 0x0000006bb23fff
dmar: RMRR base: 0x000000791c8000 end: 0x000000791d8fff
dmar: RMRR base: 0x000000791d9000 end: 0x000000791dafff
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (19176.94 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x791ff000-0x7b5fefff] (37748736 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.2: [8086:2f70] type 00 class 0x088000
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci_bus 0000:00: root bus resource [mem 0x38000000000-0x39fffffffff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: [8086:2f05] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [8086:2f07] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.1: [8086:2f09] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: [8086:2f0b] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0x39ffff2c000-0x39ffff2ffff 64bit]
pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0x39ffff28000-0x39ffff2bfff 64bit]
pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0x39ffff24000-0x39ffff27fff 64bit]
pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0x39ffff20000-0x39ffff23fff 64bit]
pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0x39ffff1c000-0x39ffff1ffff 64bit]
pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0x39ffff18000-0x39ffff1bfff 64bit]
pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0x39ffff14000-0x39ffff17fff 64bit]
pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0x39ffff10000-0x39ffff13fff 64bit]
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0x92e05000-0x92e05fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d66] type 00 class 0x010400
pci 0000:00:11.4: reg 0x10: [io 0x30a0-0x30a7]
pci 0000:00:11.4: reg 0x14: [io 0x30bc-0x30bf]
pci 0000:00:11.4: reg 0x18: [io 0x3098-0x309f]
pci 0000:00:11.4: reg 0x1c: [io 0x30b8-0x30bb]
pci 0000:00:11.4: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:11.4: reg 0x24: [mem 0x92e04000-0x92e047ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x39ffff00000-0x39ffff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0x92e02000-0x92e023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0x92e01000-0x92e013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d06] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x3078-0x307f]
pci 0000:00:1f.2: reg 0x14: [io 0x30ac-0x30af]
pci 0000:00:1f.2: reg 0x18: [io 0x3070-0x3077]
pci 0000:00:1f.2: reg 0x1c: [io 0x30a8-0x30ab]
pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1f.2: reg 0x24: [mem 0x92e00000-0x92e007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x39ffff31000-0x39ffff310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
pci 0000:00:01.0: PCI bridge to [bus 06]
pci 0000:00:01.1: PCI bridge to [bus 0a]
pci 0000:00:02.0: PCI bridge to [bus 07]
pci 0000:00:02.1: PCI bridge to [bus 0b]
pci 0000:00:02.2: PCI bridge to [bus 08]
pci 0000:00:02.3: PCI bridge to [bus 0c]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.1: PCI bridge to [bus 0d]
pci 0000:00:03.2: PCI bridge to [bus 09]
pci 0000:00:03.3: PCI bridge to [bus 0e]
pci 0000:00:1c.0: PCI bridge to [bus 0f]
pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [io 0x1200-0x12ff]
pci 0000:01:00.0: reg 0x14: [mem 0x92a91000-0x92a911ff]
pci 0000:01:00.0: reg 0x18: [io 0x1100-0x11ff]
pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
pci 0000:01:00.1: reg 0x10: [mem 0x91000000-0x91ffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0x92a8c000-0x92a8ffff]
pci 0000:01:00.1: reg 0x18: [mem 0x92000000-0x927fffff]
pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [io 0x1000-0x10ff]
pci 0000:01:00.2: reg 0x14: [mem 0x92a90000-0x92a900ff]
pci 0000:01:00.2: reg 0x18: [mem 0x92900000-0x929fffff]
pci 0000:01:00.2: reg 0x1c: [mem 0x92a00000-0x92a7ffff]
pci 0000:01:00.2: reg 0x20: [mem 0x92a80000-0x92a87fff]
pci 0000:01:00.2: reg 0x24: [mem 0x92800000-0x928fffff]
pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:00.4: reg 0x20: [io 0x1300-0x131f]
pci 0000:01:00.7: [103c:193f] type 00 class 0xff0000
pci 0000:01:00.7: reg 0x10: [mem 0x92a88000-0x92a8bfff]
pci 0000:00:1c.2: PCI bridge to [bus 01]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff]
pci 0000:02:00.0: [8086:1521] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0x92c00000-0x92cfffff]
pci 0000:02:00.0: reg 0x18: [io 0x2020-0x203f]
pci 0000:02:00.0: reg 0x1c: [mem 0x92d04000-0x92d07fff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: reg 0x184: [mem 0x39fffe60000-0x39fffe63fff 64bit pref]
pci 0000:02:00.0: reg 0x190: [mem 0x39fffe40000-0x39fffe43fff 64bit pref]
pci 0000:02:00.1: [8086:1521] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0x92b00000-0x92bfffff]
pci 0000:02:00.1: reg 0x18: [io 0x2000-0x201f]
pci 0000:02:00.1: reg 0x1c: [mem 0x92d00000-0x92d03fff]
pci 0000:02:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: reg 0x184: [mem 0x39fffe20000-0x39fffe23fff 64bit pref]
pci 0000:02:00.1: reg 0x190: [mem 0x39fffe00000-0x39fffe03fff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0x92b00000-0x92dfffff]
pci 0000:00:1c.4: bridge window [mem 0x39fffe00000-0x39fffefffff 64bit pref]
pci 0000:00:1c.4: bridge has subordinate 02 but max busn 03
pci 0000:00:1c.6: PCI bridge to [bus 10]
pci 0000:00:1c.7: PCI bridge to [bus 11]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: Enabled 9 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.1
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00093000-0x0009ffff]
e820: reserve RAM buffer [mem 0x636a4000-0x63ffffff]
e820: reserve RAM buffer [mem 0x6bb25000-0x6bffffff]
e820: reserve RAM buffer [mem 0x784ff000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0540-0x057f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 06]
pci 0000:00:01.1: PCI bridge to [bus 0a]
pci 0000:00:02.0: PCI bridge to [bus 07]
pci 0000:00:02.1: PCI bridge to [bus 0b]
pci 0000:00:02.2: PCI bridge to [bus 08]
pci 0000:00:02.3: PCI bridge to [bus 0c]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.1: PCI bridge to [bus 0d]
pci 0000:00:03.2: PCI bridge to [bus 09]
pci 0000:00:03.3: PCI bridge to [bus 0e]
pci 0000:00:1c.0: PCI bridge to [bus 0f]
pci 0000:01:00.2: BAR 6: assigned [mem 0x90000000-0x9000ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 01]
pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff]
pci 0000:02:00.0: BAR 6: assigned [mem 0x92d80000-0x92dfffff pref]
pci 0000:02:00.1: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0x92b00000-0x92dfffff]
pci 0000:00:1c.4: bridge window [mem 0x39fffe00000-0x39fffefffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 10]
pci 0000:00:1c.7: PCI bridge to [bus 11]
pci_bus 0000:00: resource 4 [mem 0x000c4000-0x000cbfff]
pci_bus 0000:00: resource 5 [io 0x0000-0x03af]
pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 7 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 8 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [io 0x1000-0xffff]
pci_bus 0000:00: resource 11 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:00: resource 12 [mem 0x38000000000-0x39fffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x90000000-0x92afffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x92b00000-0x92dfffff]
pci_bus 0000:02: resource 2 [mem 0x39fffe00000-0x39fffefffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:14.0: enabling device (0140 -> 0142)
pci 0000:01:00.1: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14300K (ffff880036402000 - ffff8800371f9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x5f6a4000-0x636a4000] (64MB) mapped at [ffff88005f6a4000-ffff8800636a3fff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x2e
microcode: Microcode Update Driver: v2.00 , Peter Oruba
simple-framebuffer simple-framebuffer.0: framebuffer at 0x91000000, 0x300000 bytes, mapped to 0xffffc90011c00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1439541077.816:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31654
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: can't derive routing for PCI INT A
pcieport 0000:00:01.0: PCI INT A: no GSI
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:01.1: can't derive routing for PCI INT A
pcieport 0000:00:01.1: PCI INT A: no GSI
pcieport 0000:00:01.1: irq 66 for MSI/MSI-X
pcieport 0000:00:02.0: can't derive routing for PCI INT A
pcieport 0000:00:02.0: PCI INT A: no GSI
pcieport 0000:00:02.0: irq 67 for MSI/MSI-X
pcieport 0000:00:02.1: can't derive routing for PCI INT A
pcieport 0000:00:02.1: PCI INT A: no GSI
pcieport 0000:00:02.1: irq 68 for MSI/MSI-X
pcieport 0000:00:02.2: can't derive routing for PCI INT A
pcieport 0000:00:02.2: PCI INT A: no GSI
pcieport 0000:00:02.2: irq 69 for MSI/MSI-X
pcieport 0000:00:02.3: can't derive routing for PCI INT A
pcieport 0000:00:02.3: PCI INT A: no GSI
pcieport 0000:00:02.3: irq 70 for MSI/MSI-X
pcieport 0000:00:03.0: irq 71 for MSI/MSI-X
pcieport 0000:00:03.1: irq 72 for MSI/MSI-X
pcieport 0000:00:03.2: irq 73 for MSI/MSI-X
pcieport 0000:00:03.3: irq 74 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 75 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 76 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 77 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 78 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 79 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.4: Signaling PME through PCIe PME interrupt
pci 0000:01:00.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Can't read CTR while initializing i8042
i8042: probe of i8042 failed with error -5
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:00: setting system clock to 2015-08-14 08:31:19 UTC (1439541079)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 924K (ffff880001719000 - ffff880001800000)
Freeing unused kernel memory: 216K (ffff8800019ca000 - ffff880001a00000)
systemd-udevd[82]: starting version 215
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
PTP clock support registered
SCSI subsystem initialized
dca service started, version 1.12.1
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:02:00.0: irq 80 for MSI/MSI-X
igb 0000:02:00.0: irq 81 for MSI/MSI-X
igb 0000:02:00.0: irq 82 for MSI/MSI-X
igb 0000:02:00.0: irq 83 for MSI/MSI-X
igb 0000:02:00.0: irq 84 for MSI/MSI-X
igb 0000:02:00.0: irq 85 for MSI/MSI-X
igb 0000:02:00.0: irq 86 for MSI/MSI-X
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0x92e02000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:01:00.4: detected 8 ports
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 19, io base 0x00001300
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:01:00.4
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0x92e01000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: enabling device (0406 -> 0407)
ahci 0000:00:11.4: irq 87 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl RAID mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
igb 0000:02:00.0: irq 80 for MSI/MSI-X
igb 0000:02:00.0: irq 81 for MSI/MSI-X
igb 0000:02:00.0: irq 82 for MSI/MSI-X
igb 0000:02:00.0: irq 83 for MSI/MSI-X
igb 0000:02:00.0: irq 84 for MSI/MSI-X
igb 0000:02:00.0: irq 85 for MSI/MSI-X
igb 0000:02:00.0: irq 86 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04100 irq 87
ata2: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04180 irq 87
ata3: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04200 irq 87
ata4: SATA max UDMA/133 abar m2048@0x92e04000 port 0x92e04280 irq 87
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb5: SerialNumber: 0000:00:14.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 6 ports detected
usb: failed to peer usb5-port3 and usb4-port1 by location (usb5-port3:none) (usb4-port1:usb5-port2)
usb usb5-port3: failed to peer to usb4-port1 (-16)
usb: port power management may be unreliable
usb: failed to peer usb5-port4 and usb4-port1 by location (usb5-port4:none) (usb4-port1:usb5-port2)
usb usb5-port4: failed to peer to usb4-port1 (-16)
ahci 0000:00:1f.2: enabling device (0406 -> 0407)
ahci 0000:00:1f.2: irq 88 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata5: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00100 irq 88
ata6: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00180 irq 88
ata7: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00200 irq 88
ata8: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00280 irq 88
ata9: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00300 irq 88
ata10: SATA max UDMA/133 abar m2048@0x92e00000 port 0x92e00380 irq 88
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:5.0Gb/s:Width x2) 30:8d:99:b2:12:eb
igb 0000:02:00.0: eth0: PBA No: 0960FF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
igb 0000:02:00.1: irq 89 for MSI/MSI-X
igb 0000:02:00.1: irq 90 for MSI/MSI-X
igb 0000:02:00.1: irq 91 for MSI/MSI-X
igb 0000:02:00.1: irq 92 for MSI/MSI-X
igb 0000:02:00.1: irq 93 for MSI/MSI-X
igb 0000:02:00.1: irq 94 for MSI/MSI-X
igb 0000:02:00.1: irq 95 for MSI/MSI-X
igb 0000:02:00.1: irq 89 for MSI/MSI-X
igb 0000:02:00.1: irq 90 for MSI/MSI-X
igb 0000:02:00.1: irq 91 for MSI/MSI-X
igb 0000:02:00.1: irq 92 for MSI/MSI-X
igb 0000:02:00.1: irq 93 for MSI/MSI-X
igb 0000:02:00.1: irq 94 for MSI/MSI-X
igb 0000:02:00.1: irq 95 for MSI/MSI-X
igb 0000:02:00.1: added PHC on eth1
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:5.0Gb/s:Width x2) 30:8d:99:b2:12:ec
igb 0000:02:00.1: eth1: PBA No: 0960FF-0FF
igb 0000:02:00.1: Using MSI-X interrupts. 6 rx queue(s), 6 tx queue(s)
usb 1-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 1598.148 MHz
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata5.00: ATA-8: MB0500GCEHE, HPG1, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA MB0500GCEHE HPG1 PQ: 0 ANSI: 5
ata6.00: ATA-8: MB0500GCEHE, HPG1, max UDMA/133
ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA MB0500GCEHE HPG1 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: New USB device found, idVendor=8087, idProduct=8002
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
PM: Starting manual resume from disk
PM: Hibernation image partition 8:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 4-3: new high-speed USB device number 2 using xhci_hcd
usb 4-3: New USB device found, idVendor=0424, idProduct=2660
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 2 ports detected
usb 4-12: new low-speed USB device number 3 using xhci_hcd
usb 4-12: New USB device found, idVendor=046e, idProduct=5100
usb 4-12: New USB device strings: Mfr=4, Product=12, SerialNumber=0
usb 4-12: Product: USB Multimedia Keyboard
usb 4-12: Manufacturer: BTC
usb 4-12: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 4-12: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Switched to clocksource tsc
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
random: nonblocking pool is initialized
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd-udevd[214]: starting version 215
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
ipmi message handler version 39.2
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: irq 96 for MSI/MSI-X
igb 0000:02:00.0: DCA enabled
igb 0000:02:00.1: DCA enabled
ioatdma 0000:00:04.1: irq 97 for MSI/MSI-X
ioatdma 0000:00:04.2: irq 98 for MSI/MSI-X
ioatdma 0000:00:04.3: irq 99 for MSI/MSI-X
ioatdma 0000:00:04.4: irq 100 for MSI/MSI-X
ioatdma 0000:00:04.5: irq 101 for MSI/MSI-X
ioatdma 0000:00:04.6: irq 102 for MSI/MSI-X
ioatdma 0000:00:04.7: irq 103 for MSI/MSI-X
wmi: Mapper loaded
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca3 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si 00:02: IPMI kcs interface initialized
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF)
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3, timer margin: 30 seconds (nowayout=0).
input: PC Speaker as /devices/platform/pcspkr/input/input1
EFI Variables Facility v0.08 2004-May-17
Adding 16514044k swap on /dev/sda3. Priority:-1 extents:1 across:16514044k FS
hidraw: raw HID events driver (C) Jiri Kosina
AVX2 version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] Initialized drm 1.1.0 20060810
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb4/4-12/4-12:1.0/0003:046E:5100.0001/input/input2
hid-generic 0003:046E:5100.0001: input,hidraw0: USB HID v1.00 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:14.0-12/input0
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb4/4-12/4-12:1.1/0003:046E:5100.0002/input/input3
hid-generic 0003:046E:5100.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [BTC USB Multimedia Keyboard] on usb-0000:00:14.0-12/input1
alg: No test for crc32 (crc32-pclmul)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
systemd-journald[224]: Received request to flush runtime journal from PID 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Down
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Down
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
igb 0000:02:00.1 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Down
igb 0000:02:00.1 eth1: igb: eth1 NIC Link is Down
igb 0000:02:00.1 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
igb 0000:02:00.1 eth1: igb: eth1 NIC Link is Down
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Down
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20140424/exfield-420)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88047f050838), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20140424/power_meter-338)
i2c /dev entries driver
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20140424/exfield-420)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88047f050838), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20140424/power_meter-338)
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20140424/exfield-420)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88047f050838), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20140424/power_meter-338)
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20140424/exfield-420)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88047f050838), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20140424/power_meter-338)