dmesg - Test1

Return To Test1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-41-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #55~14.04.1-Ubuntu SMP Sun Jun 14 18:43:36 UTC 2015 (Ubuntu 3.16.0-41.55~14.04.1-generic 3.16.7-ckt11)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable
BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cb444fff] usable
BIOS-e820: [mem 0x00000000cb445000-0x00000000cb859fff] reserved
BIOS-e820: [mem 0x00000000cb85a000-0x00000000cba13fff] ACPI NVS
BIOS-e820: [mem 0x00000000cba14000-0x00000000cbb2cfff] reserved
BIOS-e820: [mem 0x00000000cbb2d000-0x00000000cbffffff] ACPI NVS
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Z620 Workstation/158A, BIOS J61 v03.87 02/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000CC000000 mask 3FFFFC000000 uncachable
  1 base 0000D0000000 mask 3FFFF0000000 uncachable
  2 base 0000E0000000 mask 3FFFE0000000 uncachable
  3 base 000430000000 mask 3FFFF0000000 uncachable
  4 base 380000000000 mask 3FF000000000 uncachable
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xcb445 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4ba0-0x000f4baf] mapped at [ffff8800000f4ba0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000090000] 90000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbd000, 0x01fbdfff] PGTABLE
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
init_memory_mapping: [mem 0x42fe00000-0x42fffffff]
 [mem 0x42fe00000-0x42fffffff] page 2M
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42fdfffff]
 [mem 0x42c000000-0x42fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
 [mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcb444fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xcb3fffff] page 2M
 [mem 0xcb400000-0xcb444fff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35ada000-0x36d64fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9810 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000CB77C080 000084 (v01 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: FACP 0x00000000CB783C88 00010C (v05 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: DSDT 0x00000000CB77C198 007AE9 (v02 HPQOEM SLIC-WKS 00000387 INTL 20051117)
ACPI: FACS 0x00000000CBA0B080 000040
ACPI: APIC 0x00000000CB783D98 000100 (v03 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: FPDT 0x00000000CB783E98 000044 (v01 HPQOEM SLIC-WKS 01072009 AMI  00010013)
ACPI: ASF! 0x00000000CB783EE0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000CB783F88 00003C (v01 HPQOEM OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CB783FC8 000038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005)
ACPI: ASF! 0x00000000CB784000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000CB7840A0 005913 (v01 COMPAQ WMI      00000001 MSFT 03000001)
ACPI: SLIC 0x00000000CB7899B8 000176 (v01 HPQOEM SLIC-WKS 00000001      00000000)
ACPI: SSDT 0x00000000CB789B30 002A71 (v02 HPQOEM CpuDef   00004000 INTL 20051117)
ACPI: SSDT 0x00000000CB78C5A8 0CD380 (v02 INTEL  CpuPm    00004000 INTL 20051117)
ACPI: IFEU 0x00000000CB859928 000042 (v01 HPQOEM SLIC-WKS 01072009      00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042fffffff]
Initmem setup node 0 [mem 0x00000000-0x42fffffff]
  NODE_DATA [mem 0x42fff9000-0x42fffdfff]
 [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x42fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00095fff]
  node   0: [mem 0x00100000-0xcb444fff]
  node   0: [mem 0x100000000-0x42fffffff]
On node 0 totalpages: 4174810
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3989 pages, LIFO batch:0
  DMA32 zone: 12946 pages used for memmap
  DMA32 zone: 828485 pages, LIFO batch:31
  Normal zone: 52224 pages used for memmap
  Normal zone: 3342336 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcb445000-0xcb859fff]
PM: Registered nosave memory: [mem 0xcb85a000-0xcba13fff]
PM: Registered nosave memory: [mem 0xcba14000-0xcbb2cfff]
PM: Registered nosave memory: [mem 0xcbb2d000-0xcbffffff]
PM: Registered nosave memory: [mem 0xcc000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcc000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88042fc00000 s81408 r8192 d20992 u131072
pcpu-alloc: s81408 r8192 d20992 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4109555
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16334252K/16699240K available (7627K kernel code, 1131K rwdata, 3600K rodata, 1352K init, 1300K bss, 364988K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-11.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS:16640 nr_irqs:1184 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.247 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.49 BogoMIPS (lpj=7980988)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ftrace: allocating 29254 entries in 115 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (47885.92 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcb85a000-0xcba13fff] (1810432 bytes)
PM: Registering ACPI NVS region [mem 0xcbb2d000-0xcbffffff] (5058560 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  7:55:41, date: 06/18/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7f]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdc000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38007fffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xde429000-0xde429fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xde428000-0xde42800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.2: [8086:1d3c] type 00 class 0x010185
pci 0000:00:16.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:16.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:16.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:16.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:16.2: reg 0x20: [io  0xf070-0xf07f]
pci 0000:00:16.3: [8086:1d3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io  0xf060-0xf067]
pci 0000:00:16.3: reg 0x14: [mem 0xde427000-0xde427fff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xde400000-0xde41ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xde42c000-0xde42cfff]
pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xde42e000-0xde42e3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xde420000-0xde423fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xde42d000-0xde42d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2826] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io  0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x18: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x1c: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xde42b000-0xde42b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xde42a000-0xde42a0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:05:00.0: [10de:0dd8] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xdc000000-0xddffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:05:00.0: reg 0x24: [io  0xc000-0xc07f]
pci 0000:05:00.0: reg 0x30: [mem 0xde000000-0xde07ffff pref]
pci 0000:05:00.1: [10de:0be9] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xde080000-0xde083fff]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:02.0:   bridge window [mem 0xdc000000-0xde0fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:02:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:02:00.0: reg 0x10: [mem 0xec800000-0xec803fff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xec400000-0xec7fffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 02]
pci 0000:00:11.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:11.0:   bridge window [mem 0xec400000-0xec8fffff 64bit pref]
pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xde300000-0xde31ffff]
pci 0000:01:00.0: reg 0x18: [io  0xe000-0xe01f]
pci 0000:01:00.0: reg 0x1c: [mem 0xde320000-0xde323fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xde300000-0xde3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:08:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xde200000-0xde20ffff 64bit]
pci 0000:08:00.0: reg 0x18: [mem 0xde210000-0xde211fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [mem 0xde200000-0xde2fffff]
pci 0000:09:05.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:09:05.0: reg 0x10: [mem 0xde100000-0xde100fff]
pci 0000:09:05.0: supports D1 D2
pci 0000:09:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xde100000-0xde1fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdc000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x380000000000-0x38007fffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:05:00.0
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 7f
PCI: root bus 7f: using default resources
PCI: Probing PCI hardware (bus 7f)
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [io  0x0000-0xffff]
pci_bus 0000:7f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:7f: No busn resource found for root bus, will use [bus 7f-ff]
pci_bus 0000:7f: busn_res: can not insert [bus 7f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f])
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:7f: busn_res: [bus 7f-ff] end is updated to 7f
pci_bus 0000:7f: busn_res: can not insert [bus 7f] under domain [bus 00-ff] (conflicts with (null) [bus 00-7f])
PCI: pci_cache_line_size set to 64 bytes
pci 0000:02:00.0: can't claim BAR 7 [mem 0x380000000000-0x38000007bfff 64bit pref]: no compatible bridge window
e820: reserve RAM buffer [mem 0x00096400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcb445000-0xcbffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff window] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff window] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff window] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff window] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff window] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff window] has been reserved
system 00:00: [mem 0xde426000-0xde426fff window] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0620-0x063f] has been reserved
system 00:01: [io  0x0610-0x061f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x0400-0x0453] could not be reserved
system 00:06: [io  0x0458-0x047f] has been reserved
system 00:06: [io  0x1180-0x119f] has been reserved
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:07: [io  0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:02:00.0: reg 0x164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:00:11.0: BAR 14: assigned [mem 0xde500000-0xde5fffff]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:02.0:   bridge window [mem 0xdc000000-0xde0fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:02:00.0: reg 0x164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:02:00.0: reg 0x164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:02:00.0: BAR 7: assigned [mem 0xec804000-0xec87ffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 02]
pci 0000:00:11.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:11.0:   bridge window [mem 0xde500000-0xde5fffff]
pci 0000:00:11.0:   bridge window [mem 0xec400000-0xec8fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xde300000-0xde3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [mem 0xde200000-0xde2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci 0000:00:1e.0:   bridge window [mem 0xde100000-0xde1fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xdc000000-0xefffffff]
pci_bus 0000:00: resource 11 [mem 0x380000000000-0x38007fffffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xdc000000-0xde0fffff]
pci_bus 0000:05: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xde500000-0xde5fffff]
pci_bus 0000:02: resource 2 [mem 0xec400000-0xec8fffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde300000-0xde3fffff]
pci_bus 0000:08: resource 1 [mem 0xde200000-0xde2fffff]
pci_bus 0000:09: resource 1 [mem 0xde100000-0xde1fffff]
pci_bus 0000:09: resource 4 [io  0x0000-0x03af]
pci_bus 0000:09: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:09: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:09: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:09: resource 10 [mem 0xdc000000-0xefffffff]
pci_bus 0000:09: resource 11 [mem 0x380000000000-0x38007fffffff]
pci_bus 0000:7f: resource 4 [io  0x0000-0xffff]
pci_bus 0000:7f: resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:05:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18988K (ffff880035ada000 - ffff880036d65000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc7445000-0xcb445000] (64MB) mapped at [ffff8800c7445000-ffff8800cb444fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1434614141.920:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 31939
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 18
ata2: PATA max UDMA/100 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xde42e000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-41-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xde42d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-41-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: irq 64 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 71 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-41-generic xhci_hcd
usb usb3: SerialNumber: 0000:08:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-41-generic xhci_hcd
usb usb4: SerialNumber: 0000:08:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 42aeb7df54e6d91ca0f40121e22feae6b2308816'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 3:982:925
rtc_cmos 00:04: setting system clock to 2015-06-18 07:55:42 UTC (1434614142)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 552K (ffff880001776000 - ffff880001800000)
Freeing unused kernel memory: 496K (ffff880001b84000 - ffff880001c00000)
systemd-udevd[180]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
isci 0000:02:00.0: driver configured for rev: 5 silicon
isci 0000:02:00.0: OEM parameter table found in OROM
isci 0000:02:00.0: OEM SAS parameters (version: 1.1) loaded (platform)
isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
ahci 0000:00:1f.2: version 3.0
scsi2 : isci
ahci 0000:00:1f.2: irq 72 for MSI/MSI-X
isci 0000:02:00.0: irq 73 for MSI/MSI-X
isci 0000:02:00.0: irq 74 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata3: SATA max UDMA/133 abar m2048@0xde42b000 port 0xde42b100 irq 72
ata4: SATA max UDMA/133 abar m2048@0xde42b000 port 0xde42b180 irq 72
ata5: SATA max UDMA/133 abar m2048@0xde42b000 port 0xde42b200 irq 72
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 75 for MSI/MSI-X
firewire_ohci 0000:09:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 24:be:05:0d:d7:fe
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:01:00.0: irq 76 for MSI/MSI-X
e1000e 0000:01:00.0: irq 77 for MSI/MSI-X
e1000e 0000:01:00.0: irq 78 for MSI/MSI-X
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e 0000:01:00.0 eth1: registered PHC clock
e1000e 0000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 24:be:05:0d:d7:fd
e1000e 0000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: ST31000524AS, HP64, max UDMA/100
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: ATAPI: hp      DVD RW AD-7290H5, 1H44, max UDMA/100
ata4.00: configured for UDMA/100
ata5.00: configured for UDMA/100
ata3.00: ATA-8: Corsair Force 3 SSD, 5.02, max UDMA/133
ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Corsair Force 3  5.02 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
scsi 4:0:0:0: Direct-Access     ATA      ST31000524AS     HP64 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
scsi 5:0:0:0: CD-ROM            hp       DVD RW AD-7290H5 1H44 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-3: New USB device found, idVendor=04e8, idProduct=8002
usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-3: Product: Portable SSD T1
usb 4-3: Manufacturer: Samsung
usb 4-3: SerialNumber: S25PNYAG200746X     
usbcore: registered new interface driver usb-storage
scsi9 : uas
usbcore: registered new interface driver uas
scsi 9:0:0:0: Direct-Access     Samsung  Portable SSD T1  0    PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 < sdc5 >
sd 9:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: new high-speed USB device number 3 using ehci-pci
firewire_core 0000:09:05.0: created device fw0: GUID 0060b000008de15e, S400
tsc: Refined TSC clocksource calibration: 1995.191 MHz
random: init urandom read with 86 bits of entropy available
init: plymouth-upstart-bridge main process (282) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (292) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (296) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (300) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 17334000k swap on /dev/sdc5.  Priority:-1 extents:1 across:17334000k SSFS
systemd-udevd[407]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0181
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: USB2.0-CRW
usb 1-1.2: Manufacturer: Generic
usb 1-1.2: SerialNumber: 20060413092100000
random: nonblocking pool is initialized
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-1.2:1.0
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 79 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:7f:0e.0 (POLLED)
EDAC sbridge: Driver loaded.
audit: type=1400 audit(1434606943.767:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1434606943.767:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1434606943.767:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1434606943.771:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1434606943.771:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1434606943.771:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser"
audit: type=1400 audit(1434606943.771:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=507 comm="apparmor_parser"
audit: type=1400 audit(1434606943.771:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=507 comm="apparmor_parser"
audit: type=1400 audit(1434606943.771:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=507 comm="apparmor_parser"
AVX version of gcm_enc/dec engaged.
snd_hda_intel 0000:00:1b.0: irq 80 for MSI/MSI-X
snd_hda_intel 0000:05:00.1: Disabling MSI
snd_hda_intel 0000:05:00.1: Handle VGA-switcheroo audio client
usb 1-1.6: new low-speed USB device number 4 using ehci-pci
sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
usb 1-1.6: New USB device found, idVendor=0529, idProduct=0001
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: HASP HL 3.25
usb 1-1.6: Manufacturer: AKS
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or  required key missing - tainting kernel
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:05:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 PST 2014
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c318
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Logitech Illuminated Keyboard
usb 2-1.1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C318.0001/input/input11
hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-1.1/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C318.0002/input/input12
hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.0-1.1/input1
usb 2-1.2: new low-speed USB device number 4 using ehci-pci
input: HP WMI hotkeys as /devices/virtual/input/input10
init: failsafe main process (749) killed by TERM signal
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c069
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Laser Mouse
usb 2-1.2: Manufacturer: Logitech
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C069.0003/input/input13
hid-generic 0003:046D:C069.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.2/input0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (839) killed by HUP signal
init: cups main process ended, respawning
Switched to clocksource tsc
e1000e 0000:00:19.0: irq 75 for MSI/MSI-X
e1000e 0000:00:19.0: irq 75 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input17
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
scsi 10:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
scsi 10:0:0:4: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:1: Attached scsi generic sg5 type 0
sd 10:0:0:2: Attached scsi generic sg6 type 0
sd 10:0:0:3: Attached scsi generic sg7 type 0
sd 10:0:0:4: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdd] Attached SCSI removable disk
sd 10:0:0:1: [sde] Attached SCSI removable disk
sd 10:0:0:2: [sdf] Attached SCSI removable disk
sd 10:0:0:3: [sdg] Attached SCSI removable disk
sd 10:0:0:4: [sdh] Attached SCSI removable disk
nvidia 0000:05:00.0: irq 81 for MSI/MSI-X
init: plymouth-upstart-bridge main process ended, respawning
sdc1: WRITE SAME failed. Manually zeroing.
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
audit_printk_skb: 72 callbacks suppressed
audit: type=1400 audit(1434606974.347:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2540 comm="apparmor_parser"
audit: type=1400 audit(1434606974.347:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2540 comm="apparmor_parser"
audit: type=1400 audit(1434606974.347:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2540 comm="apparmor_parser"

Return To Test1 System Information