dmesg - smallpt
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.40-gc017b03 (buildbrain@mobile-u64-720) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #1 SMP PREEMPT Mon Feb 2 17:50:48 PST 2015
CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Truncating memory at 0x80000000 to fit in 32-bit physical address space
Found tsec, start=0xf4900000 size=2000000
Tegra reserved memory:
LP0: f46ff000 - f46ff80f
Bootloader framebuffer: 00000000 - 00000000
Bootloader framebuffer2: 00000000 - 00000000
Framebuffer: f8500000 - f96fffff
2nd Framebuffer: f9700000 - fdefffff
Carveout: 00000000 - 00000000
Vpr: 00000000 - 00000000
Tsec: f4900000 - f68fffff
cma: CMA: reserved 16 MiB at ae800000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 492288
free_area_init_node: node 0, pgdat c0cfc640, node_mem_map c0e09000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 194560 pages, LIFO batch:31
HighMem zone: 2510 pages used for memmap
HighMem zone: 297728 pages, LIFO batch:31
DTS File Name: /dvs/git/dirty/git-master_linux/kernel/arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts
Tegra12: CPU Speedo value 2322, Soc Speedo value 2283, Gpu Speedo value 2138
Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1
Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1
Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1
tegra: PLLP fixed rate: 408000000
tegra_clk_shared_bus_user_init: c2bus client se left ON
tegra_clk_shared_bus_user_init: c4bus client vi left ON
Lowering cpu_lp maximum rate from 1350000000 to 1092000000
Lowering sbus maximum rate from 420000000 to 384000000
Lowering vic03 maximum rate from 900000000 to 828000000
Lowering tsec maximum rate from 900000000 to 828000000
Lowering msenc maximum rate from 600000000 to 528000000
Lowering se maximum rate from 600000000 to 528000000
Lowering vde maximum rate from 600000000 to 528000000
Lowering host1x maximum rate from 500000000 to 444000000
Lowering vi maximum rate from 700000000 to 600000000
Lowering isp maximum rate from 700000000 to 600000000
Lowering c4bus maximum rate from 700000000 to 600000000
Lowering pll_c maximum rate from 1400000000 to 1066000000
Lowering pll_c2 maximum rate from 1200000000 to 1066000000
Lowering pll_c3 maximum rate from 1200000000 to 1066000000
Lowering hdmi maximum rate from 594000000 to 297000000
Lowering sdmmc1 maximum rate from 208000000 to 204000000
Lowering sdmmc3 maximum rate from 208000000 to 204000000
Lowering gbus maximum rate from 1032000000 to 852000000
Lowering cpu_g maximum rate from 3000000000 to 2320500000
tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
Switching to timer-based delay loop
tegra_powergate_init: DONE
tegra12_plle_clk_enable: pll_e is already enabled
PERCPU: Embedded 9 pages/cpu @c1df2000 s15360 r8192 d13312 u36864
pcpu-alloc: s15360 r8192 d13312 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 490768
Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M memtype=255 ddr_die=2048M@2048M section=256M pmuboard=0x0177:0x0000:0x02:0x43:0x00 tsec=32M@3913M otf_key=c75e5bb91eb3bd947560357b64422f85 usbcore.old_scheme_first=1 core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 debug_uartport=lsport,3 power_supply=Adapter audio_codec=rt5640 modem_id=0 android.kerneltype=normal fbcon=map:1 commchip_id=0 usb_port_owner_info=0 lane_owner_info=6 emc_max_dvfs=0 touch_id=0@0 board_info=0x0177:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1923MB = 1923MB total
Memory: 1921000k/1921000k available, 142360k reserved, 1190908K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0b3cd00 (11476 kB)
.init : 0xc0b3d000 - 0xc0bbbc00 ( 507 kB)
.data : 0xc0bbc000 - 0xc0d14ef0 (1380 kB)
.bss : 0xc0d14ef0 - 0xc0d9fccc ( 556 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:960
the number of interrupt controllers found is 5
Architected local timer running at 12.00MHz (phys).
sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
Ignoring duplicate/late registration of read_current_timer delay
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
ftrace: allocating 33073 entries in 65 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc080bc30 - 0xc080bcd4
ftrace: Allocated trace_printk buffers
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
console [pstore-1] enabled
ramoops: attached 0x200000@0xf8300000, ecc: 0/0
cpuidle: using governor ladder
cpuidle: using governor menu
ardbeg_camera_auxdata: update camera lookup table.
tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
Wake16 for irq=34
Wake58 for irq=81
Wake41 for irq=129
Wake43 for irq=129
Wake40 for irq=53
Wake42 for irq=53
board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x45:0x00
board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x03:0x45:0x00
disp1 pclk=154700000
disp2 pclk=297000000
Selecting UARTD as the debug console
The debug console clock name is uartd
ardbeg_modem_init: modem_id = 0
Clear bootloader IO dpd settings
Loading jetson TK1 EMC tables.
tegra: pll_m is selected as scalable EMC clock source
Lowering emc maximum rate from 1200000000 to 924000000
tegra: validated EMC DFS table
ardbeg_edp_init: CPU regulator 11000 mA
ardbeg_edp_init: GPU regulator 10500 mA
swapper/0 isomgr_init(): iso emc max clk=924000KHz
swapper/0 isomgr_init(): max_iso_bw=7392000KB[ 0.482994] ardbeg_touch_init init raydium touch
Raydium - touch platform_id : 8
platform tegradc.0: IOVA linear map 0xf8500000(1200000)
platform tegradc.0: IOVA linear map 0xf9700000(4800000)
platform tegradc.1: IOVA linear map 0xf8500000(1200000)
platform tegradc.1: IOVA linear map 0xf9700000(4800000)
tegra11_soctherem_oc_int_init(): OC interrupts are not enabled
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
mc-err: Started MC error interface!
bio: create slab at 0
reg-fixed-voltage 0.regulator: Consumer c1 does not have device name
reg-fixed-voltage 0.regulator: Consumer c2 does not have device name
of_get_named_gpio_flags: can't parse gpios property
vdd-ac-bat: 8400 mV
reg-fixed-voltage 1.regulator: Consumer c1 does not have device name
reg-fixed-voltage 1.regulator: Consumer c2 does not have device name
of_get_named_gpio_flags: can't parse gpios property
vdd-3v3-aon: 3300 mV
reg-fixed-voltage 8.regulator: Consumer c1 does not have device name
reg-fixed-voltage 8.regulator: Consumer c2 does not have device name
reg-fixed-voltage 8.regulator: Consumer c3 does not have device name
reg-fixed-voltage 8.regulator: Consumer c6 does not have device name
reg-fixed-voltage 8.regulator: Consumer c7 does not have device name
reg-fixed-voltage 8.regulator: Consumer c8 does not have device name
reg-fixed-voltage 8.regulator: Consumer c9 does not have device name
reg-fixed-voltage 8.regulator: Consumer c10 does not have device name
reg-fixed-voltage 8.regulator: Consumer c11 does not have device name
reg-fixed-voltage 8.regulator: Consumer c12 does not have device name
of_get_named_gpio_flags: can't parse gpios property
reg-3v3-supply: 3300 mV
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
of_get_named_gpio_flags exited with status 20
of_get_named_gpio_flags exited with status 21
of_get_named_gpio_flags exited with status 157
of_get_named_gpio_flags exited with status 158
of_get_named_gpio_flags exited with status 217
of_get_named_gpio_flags exited with status 218
of_get_named_gpio_flags exited with status 172
of_get_named_gpio_flags exited with status 173
of_get_named_gpio_flags exited with status 206
of_get_named_gpio_flags exited with status 207
as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x15
as3722 4-0040: Final OTP version 1V21
gpiochip_find_base: found new base at 1016
gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio
GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
as3722-regulator as3722-regulator.0: Consumer c11 does not have device name
as3722-regulator as3722-regulator.0: Consumer c12 does not have device name
as3722-regulator as3722-regulator.0: Consumer c13 does not have device name
as3722-regulator as3722-regulator.0: Consumer c14 does not have device name
as3722-regulator as3722-regulator.0: Consumer c15 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
vdd-cpu: 650 1300 mV at 1000 mV 3500 mA
vdd-core: applied init 1000000uV constraint
vdd-core: 700 1350 mV at 1000 mV 3500 mA
vddio-ddr: at 1350 mV
as3722-sd3: no parameters
avdd-pll-pex: 1050 mV
vdd-1v8: at 1800 mV
vdd-gpu: applied init 1000000uV constraint
vdd-gpu: 650 1200 mV at 1000 mV 3500 mA
avdd-pll: at 1050 mV at 300 mA
vdd-cam: 1800 mV at 150 mA
avdd-dsi-csi: at 1200 mV at 150 mA
vdd-rtc: 800 mV at 150 mA
avdd-cam: 2800 mV at 150 mA
vdd-1v2-cam: 1175 mV at 150 mA
vddio-sdmmc-2: 1800 3300 mV at 150 mA
vdd-1v1-cam: 1275 mV at 150 mA
avdd-spi: 3300 mV at 150 mA
vdd-2v7-cam: 2800 mV at 150 mA
vpp-fuse: 1800 mV at 150 mA
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
ardbeg_wifi_power: 1
of_get_named_gpio_flags exited with status 108
usb0-vbus: 5000 mV
of_get_named_gpio_flags exited with status 109
usb1-usb2-vbus: 5000 mV
of_get_named_gpio_flags exited with status 86
vdd-hdmi: 5000 mV
of_get_named_gpio_flags exited with status 63
avdd-hdmi-pll: 3300 mV
avdd-hdmi-pll: supplied by avdd-pll-pex
reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name
of_get_named_gpio_flags exited with status 122
vdd-lcd-bl: 3300 mV
reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name
of_get_named_gpio_flags exited with status 58
vdd-lcd-bl-en: 5000 mV
reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name
of_get_named_gpio_flags: can't parse gpios property
reg-5v0-supply: 5000 mV
reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name
reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name
of_get_named_gpio_flags: can't parse gpios property
reg-1v8-supply: 1800 mV
reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name
of_get_named_gpio_flags exited with status 138
reg-dcdc-1v2: 1200 mV
reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name
reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name
of_get_named_gpio_flags exited with status 1018
as3722-gpio2-supply: 3300 mV
reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name
of_get_named_gpio_flags exited with status 1020
as3722-gpio4-supply: 3300 mV
of_get_named_gpio_flags exited with status 136
sdmmc-en-supply: 3300 mV
of_get_named_gpio_flags exited with status 138
vdd-cdc-1v2-aud: 1200 mV
reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name
reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name
reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name
of_get_named_gpio_flags: can't parse gpios property
reg-aon-1v8: 1800 mV
reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name
of_get_named_gpio_flags: can't parse gpios property
reg-aon-1v2: 1200 mV
as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected
tegra: started io power detection dynamic control
tegra: NO_IO_POWER setting 0x0
Switching to clocksource arch_sys_counter
nvmap_heap_init: nvmap_heap_init: created heap block cache
nvmap_page_pool_init: Total MB RAM: 1891
nvmap_page_pool_init: nvmap page pool size: 60512 pages (236 MB)
nvmap_page_pool_init: highmem=25600, pool_size=60512,totalram=484346, freeram=455674, totalhigh=297727, freehigh=272057
iram: dma coherent mem declare 0x40001000,258048
misc nvmap: created heap iram base 0x40001000 size (252KiB)
nvmap:inner cache maint threshold=2097152
Wake39 for irq=52
tegra-otg tegra-otg: otg transceiver registered
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
tegra-fuse tegra-fuse: Fuse driver initialized succesfully
host1x host1x: initialized
CPU PMU: probing PMU on CPU 0
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
tegra_throttle : init passed
Tegra cpuquiet initialized: disabled
cpu-tegra: init EDP limit: 2320 MHz
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.30 [Flags: R/O].
fuse init (API version 7.22)
msgmni has been set to 1457
io scheduler noop registered (default)
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
PCIE: port 0: link down, retrying
PCIE: port 0: link down, retrying
PCIE: port 0: link down, retrying
PCIE: port 0: link down, ignoring
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff]
pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [10de:0e13] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0x0000-0x00ff]
pci 0000:01:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit]
pci 0000:01:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
PCI: bus1: Fast back to back transfers disabled
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
aer 0000:00:00.0:pcie02: service driver aer loaded
pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref]
pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit]
pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
pcieport 0000:00:00.0: PCI bridge to [bus 01]
pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff]
pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref]
PCIE: No Link speed change happened
pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found
tsec tsec: initialized
isp isp.0: initialized
isp isp.1: initialized
falcon vic03.0: initialized
falcon msenc: initialized
tegradc tegradc.0: DSI: HS clock rate is 464500
p,wuxga-10-1 panel dt support not available
tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000
tegradc tegradc.0: DSI pad calibration done
tegradc tegradc.0: probed
tegradc tegradc.0: fb registered
tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110
gpio wake4 for gpio=111
tegradc tegradc.1: nominal-pclk:154012000 parent:462000000 div:3.0 pclk:154000000 152471880~167873080
tegradc tegradc.1: probed
Console: switching to colour frame buffer device 240x75
tegradc tegradc.1: fb registered
hdmi_state_machine_worker (tid edb8f5c0): state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug)
tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
hdmi_state_machine_worker (tid edb8f5c0): state 1 (Check Plug), hpd 1, pending_hpd_evt 0
hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID)
hdmi_state_machine_worker (tid edb8f5c0): state 2 (Check EDID), hpd 1, pending_hpd_evt 0
panel size 52 by 32
console [ttyS0] enabled
tegradc tegradc.1: nominal-pclk:154012000 parent:462000000 div:3.0 pclk:154000000 152471880~167873080
serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
(null): coherent DMA mask is unset
gk20a gk20a.0: failed to allocate secure buffer -12
loop: module loaded
nct1008_nct72 0-004c: success in enabling rail vdd_nct72
gpio wake35 for gpio=70
nct1008_nct72 0-004c: nct1008_probe: initialized
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
tegra_profiler: Branch: Dev
tegra_profiler: Version: 1.88
tegra_profiler: Samples version: 31
tegra_profiler: IO version: 16
armv7_pmu: arch: Cortex A15, type: 4, ver: 0
tegra_profiler: power_clk: init
tegra_profiler: auth: init
GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
tegra-sata tegra-sata.0: version 1.0
of_get_named_gpio_flags: can't parse gpios property
tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
scsi0 : tegra-sata
scsi1 : tegra-sata
ata1: SATA max UDMA/133 irq 55
ata2: DUMMY
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0000000, 00:04:4b:25:b7:8a, XID 0c000800 IRQ 641
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
tegra USB phy - inst[1] platform info:
port_otg: no
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
qc2_voltage: 0
vbus_gpio: -1
hot_plug: disabled
remote_wakeup: enabled
tegradc tegradc.1: nominal-pclk:154012000 parent:462000000 div:3.0 pclk:154000000 152471880~167873080
tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
Wake40 for irq=53
Wake42 for irq=53
tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Tegra EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.40-gc017b03 ehci_hcd
usb usb1: SerialNumber: tegra-ehci.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
tegra USB phy - inst[2] platform info:
port_otg: no
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_HOST
qc2_voltage: 0
vbus_gpio: -1
hot_plug: disabled
remote_wakeup: enabled
tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
Wake41 for irq=129
Wake43 for irq=129
tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Tegra EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.40-gc017b03 ehci_hcd
usb usb2: SerialNumber: tegra-ehci.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-pci: EHCI PCI platform driver
tegra_xusb_read_usb_calib: usb_calib0 = 0x0245038a
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbcore: registered new interface driver pl2303
Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
tegra USB phy - inst[0] platform info:
port_otg: yes
has_hostpc: yes
phy_interface: USB_PHY_INTF_UTMI
op_mode: TEGRA_USB_OPMODE_DEVICE
qc2_voltage: 0
vbus_pmu_irq: 0
vbus_gpio: -1
charging: enabled
remote_wakeup: disabled
tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
as3722-rtc as3722-rtc.1: RTC interrupt 449
i2c /dev entries driver
virtual_init
nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
tegra_dtv_probe: probing dtv.
setup_stream: bufsize = 4096, bufnum = 4
ar0832_init: ++
i2c-core: driver [max77387] using legacy suspend method
i2c-core: driver [max77387] using legacy resume method
i2c-core: driver [as364x] using legacy suspend method
i2c-core: driver [as364x] using legacy resume method
[IMX135] sensor driver loading
[IMX179] sensor driver loading
[imx132] sensor driver loading
[AR0330] sensor driver loading
[ar0261] sensor driver loading
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
zram: Created 1 device(s) ...
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
sdhci-tegra sdhci-tegra.3: Speedo value 2283
sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
otg state changed: SUSPEND --> PERIPHERAL
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using tegra-ehci
usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
handle_check_edid_l: audio_switch 1
Display connected, hpd_switch 1
handle_check_edid_l: setting audio and infoframes
tegradc tegradc.1: hdmi: can't set audio to 44100 at 154012000 pix_clock
hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled)
hdmi_state_machine_worker (tid edb8f5c0): state 4 (Enabled), hpd 1, pending_hpd_evt 0
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: Invalid maximum block size, assuming 512 bytes
sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found
mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
sdhci-tegra sdhci-tegra.2: Speedo value 2283
sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
mmc1: no vqmmc regulator found
mmc1: no vmmc regulator found
mmc1: Invalid maximum block size, assuming 512 bytes
mmc0: BKOPS_EN bit is not set
sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found
mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
gpio wake56 for gpio=170
sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
tegra-se tegra12-se: tegra_se_probe: complete
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra-hier-ictlr tegra-hier-ictlr: probed
usbcore: registered new interface driver snd-usb-audio
MAX98090 driver built on Feb 2 2015 at 17:48:09
tegra_offload_platform probe successfull.
succefully registered offload ops[ 6.394917] **********Auto tuning windows*************
WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
win[0]: 0(0) - 58(1)
win[1]: 63(0) - 127(1)
win[2]: 131(0) - 198(1)
win[3]: 202(0) - 255(1)
***************************************
********tuning windows after inserting holes*****
WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
win[0]:-7(0) - 32(2)
win[1]:34(2) - 58(1)
win[2]:63(0) - 102(2)
win[3]:104(2) - 127(1)
win[4]:131(0) - 172(2)
win[5]:174(2) - 198(1)
win[6]:202(0) - 242(2)
win[7]:244(2) - 255(1)
***********************************************
**********Tuning values*********
**estimated values**
T2T_Vmax 56, T2T_Vmin 78, 1'st_hole_Vmax 48, UI_Vmax 89
**Calculated values**
T2T_Vmax 71, 1'st_hole_Vmax 33, UI_Vmax 70
T2T_Vmin 71, 1'st_hole_Vmin 33, UI_Vmin 70
***********************************
***********final tuning windows**********
win[0]: 7 - 25
win[1]: 42 - 44
win[2]: 77 - 90
win[3]: 117 - 113
win[4]: 145 - 155
win[5]: 192 - 184
win[6]: 216 - 220
win[7]: 255 - 241
********************************
best tap win - (7-25), best tap value 16
sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 16
mmc0: new HS200 MMC card at address 0001
mmcblk mmc0:0001: Card claimed for testing.
mmcblk0: mmc0:0001 SEM16G 14.6 GiB
mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
tegra30_avp_audio_platform_probe successful.
rt5639 0-001c: read 0xfd=0x6
rt5639 0-001c: ASoC: mux INR Mux has no paths
rt5639 0-001c: ASoC: mux INL Mux has no paths
gpio wake49 for gpio=143
rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814
rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0
rt5639 0-001c: rt5639_headset_detect jack_type = 2
tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 tegra30-i2s.1 mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi tegra30-spdif mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi tegra30-i2s.3 mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 dit-hifi mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi dit-hifi mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai tegra-offload-pcm mapping ok
compress asoc: snd-soc-dummy-dai tegra-offload-compr mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai tegra-offload-pcm mapping ok
tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 tegra30-i2s.1 mapping ok
input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input0
sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found
oprofile: using timer interrupt.
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 35
NET: Registered protocol family 37
NET: Registered protocol family 41
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
Registering SWP/SWPB emulation handler
last reset is due to power on reset
Disabling clocks left on by bootloader:
audio_2x
audio
audio4
audio3
audio2
audio1
audio0
hdmi_audio
entropy
dsi2-fixed
dsi1-fixed
nor
trace
sdmmc4_ddr
sdmmc3_ddr
cclk_lp
pll_x_out0
pll_m_out1
tegra_dvfs: vdd_cpu connected to regulator
tegra_dvfs: vdd_core connected to regulator
tegra_dvfs: vdd_gpu connected to regulator
tegra_dvfs: registered vdd_cpu simon notifier
cpu_cold cooling device is registered
Tegra CPU DFLL is initialized with use_dfll = 1
cpu_hot cooling device is registered
CPU rate: 696 MHz
tegra dvfs: tegra sysfs cap interface is initialized
tegra dvfs: tegra sysfs gpu & emc interface is initialized
tegra dvfs: registered vdd_gpu simon notifier
tegra_actmon.emc: Completed initialization (0)
tegra_actmon.avp: Completed initialization (0)
tegra_mon.cpu_emc: Completed initialization (0)
reg-aon-1v2: incomplete constraints, leaving on
reg-aon-1v8: incomplete constraints, leaving on
sdmmc-en-supply: incomplete constraints, leaving on
reg-dcdc-1v2: incomplete constraints, leaving on
reg-5v0-supply: incomplete constraints, leaving on
usb0-vbus: incomplete constraints, leaving on
vpp-fuse: incomplete constraints, leaving on
vdd-2v7-cam: incomplete constraints, leaving on
avdd-spi: incomplete constraints, leaving on
vdd-1v1-cam: incomplete constraints, leaving on
vddio-sdmmc-2: incomplete constraints, leaving on
vdd-1v2-cam: incomplete constraints, leaving on
avdd-cam: incomplete constraints, leaving on
vdd-cam: incomplete constraints, leaving on
as3722-sd3: incomplete constraints, leaving on
vdd-3v3-aon: incomplete constraints, leaving on
vdd-ac-bat: incomplete constraints, leaving on
regulator-dummy: incomplete constraints, leaving on
of_get_named_gpio_flags exited with status 128
gpio wake51 for gpio=128
input: gpio-keys.4 as /devices/platform/gpio-keys.4/input/input1
as3722-rtc as3722-rtc.1: setting system clock to 2015-05-30 13:45:14 UTC (1432993514)
ALSA device list:
#0: HDA NVIDIA Tegra at 0x70038000 irq 113
#1: tegra-rt5639
EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
devtmpfs: mounted
Freeing unused kernel memory: 504K (c0b3d000 - c0bbb000)
init: plymouth-upstart-bridge main process (117) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (127) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (120) terminated with status 5
init: plymouth-upstart-bridge main process (131) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-udevd[276]: starting version 204
Tegra cpuquiet clusterswitch enabled
vi vi.0: vi_probe: ++
vi vi.0: initialized
vi vi.1: vi_probe: ++
vi vi.1: initialized
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
pcl-generic pcl-generic: layout empty.
pcl-generic pcl-generic: virtual_device_add
tegra-i2c tegra12-i2c.2: no acknowledge from address 0x10
pcl-generic pcl-generic: virtual_device_add
tegra-i2c tegra12-i2c.2: no acknowledge from address 0xc
pcl-generic pcl-generic: virtual_device_add
tegra-i2c tegra12-i2c.2: no acknowledge from address 0x30
pcl-generic pcl-generic: virtual_device_add
tegra-i2c tegra12-i2c.2: no acknowledge from address 0x36
pcl-generic pcl-generic: virtual_device_add
tegra-i2c tegra12-i2c.2: no acknowledge from address 0x18
pcl-generic pcl-generic: virtual_device_add
pcl-generic pcl-generic: camera_chip_add chip pcl_AR0330 already added.
tegra-i2c tegra12-i2c.2: no acknowledge from address 0x10
tegra_simon_cpu_grading_cb: graded cpu: v = 790, t = 36000, grade = 0
init: failsafe main process (539) killed by TERM signal
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vgaarb: this pci device is not a vga device
tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 34500, grade = 0
init: plymouth-upstart-bridge main process ended, respawning
vgaarb: this pci device is not a vga device
tegradc tegradc.1: nominal-pclk:154012000 parent:462000000 div:3.0 pclk:154000000 152471880~167873080
vgaarb: this pci device is not a vga device
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid ec9150c0): state 4 (Enabled), hpd 0, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid ec9150c0): state 5 (Wait for HPD reassert), hpd 1, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 6 (Recheck EDID)
hdmi_state_machine_worker (tid ec9150c0): state 6 (Recheck EDID), hpd 1, pending_hpd_evt 0
read_edid_into_buffer: extension_blocks = 1, max_ext_blocks = 3
hdmi_recheck_edid: read_edid_into_buffer() returned 256
old edid len = 256
No EDID change after HPD bounce, taking no action.
dc powergated, skipping hdcp reset
hdmi_state_machine_set_state_l: switching from state 6 (Recheck EDID) to state 4 (Enabled)
r8169 0000:01:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
init: systemd-logind main process (373) killed by TERM signal
systemd-udevd[3684]: starting version 204
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid ec046ac0): state 4 (Enabled), hpd 0, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid ec046ac0): state 5 (Wait for HPD reassert), hpd 1, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 6 (Recheck EDID)
hdmi_state_machine_worker (tid ec046ac0): state 6 (Recheck EDID), hpd 1, pending_hpd_evt 0
read_edid_into_buffer: extension_blocks = 1, max_ext_blocks = 3
hdmi_recheck_edid: read_edid_into_buffer() returned 256
old edid len = 256
No EDID change after HPD bounce, taking no action.
dc powergated, skipping hdcp reset
hdmi_state_machine_set_state_l: switching from state 6 (Recheck EDID) to state 4 (Enabled)
sock: Can't find a process for this sock.
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid edb94a40): state 4 (Enabled), hpd 0, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 4 (Enabled) to state 5 (Wait for HPD reassert)
tegra_dc_hdmi_irq: start
tegra_dc_hdmi_irq: end
hdmi_state_machine_worker (tid edb94a40): state 5 (Wait for HPD reassert), hpd 1, pending_hpd_evt 1
hdmi_state_machine_set_state_l: switching from state 5 (Wait for HPD reassert) to state 6 (Recheck EDID)
hdmi_state_machine_worker (tid edb94a40): state 6 (Recheck EDID), hpd 1, pending_hpd_evt 0
read_edid_into_buffer: extension_blocks = 1, max_ext_blocks = 3
hdmi_recheck_edid: read_edid_into_buffer() returned 256
old edid len = 256
No EDID change after HPD bounce, taking no action.
dc powergated, skipping hdcp reset
hdmi_state_machine_set_state_l: switching from state 6 (Recheck EDID) to state 4 (Enabled)