dmesg - FIRST
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b327bfff] usable
BIOS-e820: [mem 0x00000000b327c000-0x00000000b3281fff] reserved
BIOS-e820: [mem 0x00000000b3282000-0x00000000b33edfff] usable
BIOS-e820: [mem 0x00000000b33ee000-0x00000000b340efff] reserved
BIOS-e820: [mem 0x00000000b340f000-0x00000000b346efff] usable
BIOS-e820: [mem 0x00000000b346f000-0x00000000b346ffff] reserved
BIOS-e820: [mem 0x00000000b3470000-0x00000000b34f0fff] ACPI NVS
BIOS-e820: [mem 0x00000000b34f1000-0x00000000b370efff] reserved
BIOS-e820: [mem 0x00000000b370f000-0x00000000b3715fff] usable
BIOS-e820: [mem 0x00000000b3716000-0x00000000b371efff] reserved
BIOS-e820: [mem 0x00000000b371f000-0x00000000b376efff] usable
BIOS-e820: [mem 0x00000000b376f000-0x00000000b379efff] ACPI NVS
BIOS-e820: [mem 0x00000000b379f000-0x00000000b37e0fff] usable
BIOS-e820: [mem 0x00000000b37e1000-0x00000000b37fefff] ACPI data
BIOS-e820: [mem 0x00000000b37ff000-0x00000000b37fffff] usable
BIOS-e820: [mem 0x00000000b3800000-0x00000000b7ffffff] reserved
BIOS-e820: [mem 0x00000000f7fff000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fc904000-0x00000000fc904fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. Q330 /Q330 , BIOS 05UU.M001.20101012.WZW 10/12/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0B4000000 mask FFC000000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FE0000000 write-back
3 base 0A0000000 mask FF0000000 write-back
4 base 0B0000000 mask FF8000000 write-back
5 base 100000000 mask FC0000000 write-back
6 base 140000000 mask FF8000000 write-back
7 base 140000000 mask FF8000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xb4000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xb3800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6690-0x000f669f] mapped at [ffff8800000f6690]
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb327bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xb31fffff] page 2M
[mem 0xb3200000-0xb327bfff] page 4k
init_memory_mapping: [mem 0xb3282000-0xb33edfff]
[mem 0xb3282000-0xb33edfff] page 4k
init_memory_mapping: [mem 0xb340f000-0xb346efff]
[mem 0xb340f000-0xb346efff] page 4k
BRK [0x01af8000, 0x01af8fff] PGTABLE
init_memory_mapping: [mem 0xb370f000-0xb3715fff]
[mem 0xb370f000-0xb3715fff] page 4k
BRK [0x01af9000, 0x01af9fff] PGTABLE
init_memory_mapping: [mem 0xb371f000-0xb376efff]
[mem 0xb371f000-0xb376efff] page 4k
init_memory_mapping: [mem 0xb379f000-0xb37e0fff]
[mem 0xb379f000-0xb37e0fff] page 4k
init_memory_mapping: [mem 0xb37ff000-0xb37fffff]
[mem 0xb37ff000-0xb37fffff] page 4k
RAMDISK: [mem 0x363e2000-0x371e8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F65D0 000024 (v02 PTLTD )
ACPI: XSDT 0x00000000B37F49D8 000064 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: FACP 0x00000000B37E3000 0000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
ACPI: DSDT 0x00000000B37E4000 00A196 (v02 Intel CALPELLA 06040000 INTL 20060912)
ACPI: FACS 0x00000000B379BFC0 000040
ACPI: HPET 0x00000000B37FED6A 000038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
ACPI: MCFG 0x00000000B37FEDA2 00003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
ACPI: APIC 0x00000000B37FEDDE 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x00000000B37FEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0x00000000B37FEE8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: SSDT 0x00000000B37EF000 000934 (v01 NvdRef NvdTabl 00001000 INTL 20061109)
ACPI: SSDT 0x00000000B37E2000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b800000-ffff88013effffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xb327bfff]
node 0: [mem 0xb3282000-0xb33edfff]
node 0: [mem 0xb340f000-0xb346efff]
node 0: [mem 0xb370f000-0xb3715fff]
node 0: [mem 0xb371f000-0xb376efff]
node 0: [mem 0xb379f000-0xb37e0fff]
node 0: [mem 0xb37ff000-0xb37fffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 996477
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 9986 pages used for memmap
DMA32 zone: 730338 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xb6000000-0xb7ffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
PM: Registered nosave memory: [mem 0xb327c000-0xb3281fff]
PM: Registered nosave memory: [mem 0xb33ee000-0xb340efff]
PM: Registered nosave memory: [mem 0xb346f000-0xb346ffff]
PM: Registered nosave memory: [mem 0xb3470000-0xb34f0fff]
PM: Registered nosave memory: [mem 0xb34f1000-0xb370efff]
PM: Registered nosave memory: [mem 0xb3716000-0xb371efff]
PM: Registered nosave memory: [mem 0xb376f000-0xb379efff]
PM: Registered nosave memory: [mem 0xb37e1000-0xb37fefff]
PM: Registered nosave memory: [mem 0xb3800000-0xb7ffffff]
PM: Registered nosave memory: [mem 0xb8000000-0xf7ffefff]
PM: Registered nosave memory: [mem 0xf7fff000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfc903fff]
PM: Registered nosave memory: [mem 0xfc904000-0xfc904fff]
PM: Registered nosave memory: [mem 0xfc905000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xb8000000-0xf7ffefff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 982830
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3836108K/3985908K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 149800K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2527.029 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.05 BogoMIPS (lpj=10108116)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21614 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal monitoring handled by SMI
#3
CPU3: Thermal monitoring handled by SMI
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20216.23 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xb3470000-0xb34f0fff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xb376f000-0xb379efff] (196608 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf8000000-0x107ffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0x107ffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) (size reduced!)
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013F039800 000474 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013F039000 00067E (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013AE49C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88013AD4BE00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0xb8000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfc905800-0xfc90580f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfc906000-0xfc9063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfc900000-0xfc903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfc906400-0xfc9067ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io 0x1810-0x1817]
pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfc905000-0xfc9057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfc906800-0xfc9068ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfc904000-0xfc904fff 64bit]
pci 0000:02:00.0: [10de:0a70] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xbc000000-0xbcffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xbe000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbdefffff]
pci 0000:00:01.0: bridge window [mem 0xbe000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfc500000-0xfc503fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:00:1c.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05-06]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:00:1c.1: bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref]
pci 0000:07:00.0: [11ab:4354] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfc600000-0xfc603fff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0x5000-0x50ff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 07-08]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:00:1c.3: bridge window [mem 0xfce00000-0xfcffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5) *7
ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *11
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI : EC: 0 stale EC events cleared
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xb327c000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb33ee000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb346f000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb3716000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb376f000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb37e1000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb3800000-0xb3ffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0500-0x050f] has been reserved
system 00:00: [io 0x0600-0x0603] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x047f] could not be reserved
system 00:00: [io 0x1180-0x11ff] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0xfe00] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x06a0-0x06af] has been reserved
system 00:01: [io 0x06b0-0x06ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xf7fff000-0xf7ffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:02:00.0: BAR 6: assigned [mem 0xbd000000-0xbd07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbdefffff]
pci 0000:00:01.0: bridge window [mem 0xbe000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:00:1c.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 05-06]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:00:1c.1: bridge window [mem 0xfcc00000-0xfcdfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 07-08]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:00:1c.3: bridge window [mem 0xfce00000-0xfcffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xb8000000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbdefffff]
pci_bus 0000:02: resource 2 [mem 0xbe000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc5fffff]
pci_bus 0000:03: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xfc400000-0xfc4fffff]
pci_bus 0000:05: resource 2 [mem 0xfcc00000-0xfcdfffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:07: resource 2 [mem 0xfce00000-0xfcffffff 64bit pref]
pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:09: resource 10 [mem 0xb8000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14364K (ffff8800363e2000 - ffff8800371e9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xaf27c000-0xb327c000] (64MB) mapped at [ffff8800af27c000-ffff8800b327bfff]
Simple Boot Flag at 0x37 set to 0x1
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1432028827.500:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7520
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2015-05-19 09:47:08 UTC (1432028828)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
systemd-udevd[70]: starting version 215
random: systemd-udevd urandom read with 4 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (36 C)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (36 C)
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
sky2: driver version 1.30
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfc906000
sky2 0000:07:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:07:00.0: irq 41 for MSI/MSI-X
sky2 0000:07:00.0 eth0: addr e8:11:32:7f:a2:3e
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfc906400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc905000 port 0xfc905100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfc905000 port 0xfc905180 irq 42
ata3: DUMMY
ata4: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BEVT-35A0RT0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-3 1A01 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-U633J, SC01, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-U633J SC01 PQ: 0 ANSI: 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
scsi 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.4: New USB device found, idVendor=1210, idProduct=25f4
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB 2.0 PC Camera
usb 1-1.4: Manufacturer: Alcor Micro, Corp.
tsc: Refined TSC clocksource calibration: 2526.887 MHz
usb 2-1.3: new full-speed USB device number 3 using ehci-pci
usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219c
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Broadcom BCM2070 Bluetooth Device
usb 2-1.3: Manufacturer: Broadcom Corp
usb 2-1.3: SerialNumber: 90A4DE1F3C99
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
random: nonblocking pool is initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.23)
systemd-udevd[192]: starting version 215
ACPI Warning: SystemIO range 0x0000000000001840-0x000000000000185f conflicts with OpRegion 0x0000000000001840-0x000000000000184f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
ACPI: Battery Slot [BAT1] (battery present)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.P0P2.NVID.GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.P0P2.NVID.GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.P0P2.NVID.GPIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ACPI: AC Adapter [ADP1] (off-line)
systemd-journald[182]: Received request to flush runtime journal from PID 1
media: Linux media interface: v0.10
input: PC Speaker as /devices/platform/pcspkr/input/input6
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
bcma: bus0: Bus registered
i915 0000:00:02.0: irq 45 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
fbcon: inteldrmfb (fb0) is primary device
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
samsung_laptop: detected SABI interface: SwSmi@
samsung_laptop: Backlight controlled by ACPI video driver
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x19
sound hdaudioC0D0: Mic=0x18
Linux video capture interface: v2.00
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 618857
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [NVID] (multi-head: yes rom: yes post: no)
acpi device:02: registered as cooling_device6
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:06: registered as cooling_device7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
systemd-journald[182]: Received request to flush runtime journal from PID 1
brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cfg80211: Calling CRDA for country: US
Adding 7969788k swap on /dev/sda5. Priority:-1 extents:1 across:7969788k FS
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx-0.fw
brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 0000:07:00.0 eth0: disabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
(NULL device *): firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
(NULL device *): firmware: direct-loading firmware brcm/bcm43xx-0.fw
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 861.758 msecs
PM: late suspend of devices complete after 15.980 msecs
PM: noirq suspend of devices complete after 155.922 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring enabled (TM1)
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x4
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x5
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI : EC: 1 stale EC events cleared
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 154.798 msecs
PM: early resume of devices complete after 2.041 msecs
mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
sd 0:0:0:0: [sda] Starting disk
usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
usb 2-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
PM: resume of devices complete after 321.278 msecs
PM: Finishing wakeup.
Restarting tasks ...
bcma-pci-bridge 0000:03:00.0: no hotplug settings from platform
ata2.00: configured for UDMA/100
done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
sky2 0000:07:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:07:00.0: no hotplug settings from platform
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:08:30:8f:41:42
wlan0: send auth to 00:08:30:8f:41:42 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:08:30:8f:41:42 (try 1/3)
wlan0: RX AssocResp from 00:08:30:8f:41:42 (capab=0x401 status=0 aid=158)
brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DK
cfg80211: Regulatory domain changed to country: DK
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5026 > 5000), lowering kernel.perf_event_max_sample_rate to 25000