dmesg - amux73_new
Linux version 2.6.18-308.8.2.el5 (brewbuilder@norob.fnal.gov) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Jun 12 11:25:25 EDT 2012
Command line: ro root=/dev/sda2 numa=off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
BIOS-e820: 00000000bfee0000 - 00000000bfeff000 (ACPI data)
BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI NVS)
BIOS-e820: 00000000bff00000 - 00000000c0000000 (usable)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
DMI present.
DMI: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/30/2013
ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f6b80
ACPI: XSDT (v001 INTEL 440BX 0x06040000 VMW 0x01324272) @ 0x00000000bfee282f
ACPI: FADT (v004 INTEL 440BX 0x06040000 PTL 0x000f4240) @ 0x00000000bfefee73
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000bfee2b19
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000bfee2a9f
ACPI: MCFG (v001 PTLTD $PCITBL$ 0x06040000 LTP 0x00000001) @ 0x00000000bfee2a63
ACPI: SRAT (v002 VMWARE MEMPLUG 0x06040000 VMW 0x00000001) @ 0x00000000bfee292b
ACPI: HPET (v001 VMWARE VMW HPET 0x06040000 VMW 0x00000001) @ 0x00000000bfee28f3
ACPI: WAET (v001 VMWARE VMW WAET 0x06040000 VMW 0x00000001) @ 0x00000000bfee28cb
ACPI: DSDT (v001 PTLTD Custom 0x06040000 MSFT 0x03000001) @ 0x0000000000000000
NUMA turned off
Faking a node at 0000000000000000-0000000440000000
Bootmem setup node 0 0000000000000000-0000000440000000
bootmap start 100000 pages 136
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-440000
On node 0 totalpages: 4131714
DMA zone: 2410 pages, LIFO batch:0
DMA32 zone: 768024 pages, LIFO batch:31
Normal zone: 3361280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
Processor #6 6:13 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086af01 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000ca000
Nosave address range: 00000000000ca000 - 00000000000cc000
Nosave address range: 00000000000cc000 - 00000000000dc000
Nosave address range: 00000000000dc000 - 0000000000100000
Nosave address range: 00000000bfee0000 - 00000000bfeff000
Nosave address range: 00000000bfeff000 - 00000000bff00000
Nosave address range: 00000000c0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000f8000000
Nosave address range: 00000000f8000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec10000
Nosave address range: 00000000fec10000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000fffe0000
Nosave address range: 00000000fffe0000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 4131714
Kernel command line: ro root=/dev/sda2 numa=off
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Using TSC for driving interrupts
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x283c000 - 0x683c000
Memory: 16433044k/17825792k available (2617k kernel code, 343592k reserved, 1671k data, 224k init)
Calibrating delay loop (skipped) preset value.. 5800.00 BogoMIPS (lpj=2900000)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
MCE: Machine Check Exception Reporting is disabled.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Cannot setup NMI watchdog on CPU 0
Using local APIC timer interrupts.
Detected 4.124 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x2
Initializing CPU#1
Cannot setup NMI watchdog on CPU 1
Calibrating delay loop (skipped) preset value.. 5800.00 BogoMIPS (lpj=2900000)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x4
Initializing CPU#2
Cannot setup NMI watchdog on CPU 2
Calibrating delay loop (skipped) preset value.. 5800.00 BogoMIPS (lpj=2900000)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x6
Initializing CPU#3
Cannot setup NMI watchdog on CPU 3
Calibrating delay loop (skipped) preset value.. 5800.00 BogoMIPS (lpj=2900000)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 07
Brought up 4 CPUs
time.c: Using 14.318180 MHz WALL HPET GTOD TSC Timekeeping timer.
time.c: Detected 2900.000 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=20
checking if image is initramfs... it is
Freeing initrd memory: 2728k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
Warning: pci_mmcfg_init marking 256MB space uncacheable.
MCFG table requires 128MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
PCI: Using MMCONFIG at f0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
PCI: Transparent bridge - 0000:00:11.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
hpet0: 16 64-bit timers, 14318180 Hz
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
pnp: 00:0d: ioport range 0xfce0-0xfcff has been reserved
pnp: 00:0d: iomem range 0xf0000000-0xf7ffffff has been reserved
pnp: 00:0d: iomem range 0xfe800000-0xfe9fffff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:11.0
IO window: 2000-3fff
MEM window: fd500000-fdffffff
PREFETCH window 0x00000000ebb00000-0x00000000ebffffff
PCI: Bridge: 0000:00:15.0
IO window: 4000-4fff
MEM window: fd400000-fd4fffff
PREFETCH window 0x00000000eba00000-0x00000000ebafffff
PCI: Bridge: 0000:00:15.1
IO window: 8000-8fff
MEM window: fd000000-fd0fffff
PREFETCH window 0x00000000eb600000-0x00000000eb6fffff
PCI: Bridge: 0000:00:15.2
IO window: c000-cfff
MEM window: fcc00000-fccfffff
PREFETCH window 0x00000000eb200000-0x00000000eb2fffff
PCI: Bridge: 0000:00:15.3
IO window: disabled.
MEM window: fc800000-fc8fffff
PREFETCH window 0x00000000eae00000-0x00000000eaefffff
PCI: Bridge: 0000:00:15.4
IO window: disabled.
MEM window: fc400000-fc4fffff
PREFETCH window 0x00000000eaa00000-0x00000000eaafffff
PCI: Bridge: 0000:00:15.5
IO window: disabled.
MEM window: fc000000-fc0fffff
PREFETCH window 0x00000000ea600000-0x00000000ea6fffff
PCI: Bridge: 0000:00:15.6
IO window: disabled.
MEM window: fbc00000-fbcfffff
PREFETCH window 0x00000000ea200000-0x00000000ea2fffff
PCI: Bridge: 0000:00:15.7
IO window: disabled.
MEM window: fb800000-fb8fffff
PREFETCH window 0x00000000e9e00000-0x00000000e9efffff
PCI: Bridge: 0000:00:16.0
IO window: 5000-5fff
MEM window: fd300000-fd3fffff
PREFETCH window 0x00000000eb900000-0x00000000eb9fffff
PCI: Bridge: 0000:00:16.1
IO window: 9000-9fff
MEM window: fcf00000-fcffffff
PREFETCH window 0x00000000eb500000-0x00000000eb5fffff
PCI: Bridge: 0000:00:16.2
IO window: d000-dfff
MEM window: fcb00000-fcbfffff
PREFETCH window 0x00000000eb100000-0x00000000eb1fffff
PCI: Bridge: 0000:00:16.3
IO window: disabled.
MEM window: fc700000-fc7fffff
PREFETCH window 0x00000000ead00000-0x00000000eadfffff
PCI: Bridge: 0000:00:16.4
IO window: disabled.
MEM window: fc300000-fc3fffff
PREFETCH window 0x00000000ea900000-0x00000000ea9fffff
PCI: Bridge: 0000:00:16.5
IO window: disabled.
MEM window: fbf00000-fbffffff
PREFETCH window 0x00000000ea500000-0x00000000ea5fffff
PCI: Bridge: 0000:00:16.6
IO window: disabled.
MEM window: fbb00000-fbbfffff
PREFETCH window 0x00000000ea100000-0x00000000ea1fffff
PCI: Bridge: 0000:00:16.7
IO window: disabled.
MEM window: fb700000-fb7fffff
PREFETCH window 0x00000000e9d00000-0x00000000e9dfffff
PCI: Bridge: 0000:00:17.0
IO window: 6000-6fff
MEM window: fd200000-fd2fffff
PREFETCH window 0x00000000eb800000-0x00000000eb8fffff
PCI: Bridge: 0000:00:17.1
IO window: a000-afff
MEM window: fce00000-fcefffff
PREFETCH window 0x00000000eb400000-0x00000000eb4fffff
PCI: Bridge: 0000:00:17.2
IO window: e000-efff
MEM window: fca00000-fcafffff
PREFETCH window 0x00000000eb000000-0x00000000eb0fffff
PCI: Bridge: 0000:00:17.3
IO window: disabled.
MEM window: fc600000-fc6fffff
PREFETCH window 0x00000000eac00000-0x00000000eacfffff
PCI: Bridge: 0000:00:17.4
IO window: disabled.
MEM window: fc200000-fc2fffff
PREFETCH window 0x00000000ea800000-0x00000000ea8fffff
PCI: Bridge: 0000:00:17.5
IO window: disabled.
MEM window: fbe00000-fbefffff
PREFETCH window 0x00000000ea400000-0x00000000ea4fffff
PCI: Bridge: 0000:00:17.6
IO window: disabled.
MEM window: fba00000-fbafffff
PREFETCH window 0x00000000ea000000-0x00000000ea0fffff
PCI: Bridge: 0000:00:17.7
IO window: disabled.
MEM window: fb600000-fb6fffff
PREFETCH window 0x00000000e9c00000-0x00000000e9cfffff
PCI: Bridge: 0000:00:18.0
IO window: 7000-7fff
MEM window: fd100000-fd1fffff
PREFETCH window 0x00000000eb700000-0x00000000eb7fffff
PCI: Bridge: 0000:00:18.1
IO window: b000-bfff
MEM window: fcd00000-fcdfffff
PREFETCH window 0x00000000eb300000-0x00000000eb3fffff
PCI: Bridge: 0000:00:18.2
IO window: disabled.
MEM window: fc900000-fc9fffff
PREFETCH window 0x00000000eaf00000-0x00000000eaffffff
PCI: Bridge: 0000:00:18.3
IO window: disabled.
MEM window: fc500000-fc5fffff
PREFETCH window 0x00000000eab00000-0x00000000eabfffff
PCI: Bridge: 0000:00:18.4
IO window: disabled.
MEM window: fc100000-fc1fffff
PREFETCH window 0x00000000ea700000-0x00000000ea7fffff
PCI: Bridge: 0000:00:18.5
IO window: disabled.
MEM window: fbd00000-fbdfffff
PREFETCH window 0x00000000ea300000-0x00000000ea3fffff
PCI: Bridge: 0000:00:18.6
IO window: disabled.
MEM window: fb900000-fb9fffff
PREFETCH window 0x00000000e9f00000-0x00000000e9ffffff
PCI: Bridge: 0000:00:18.7
IO window: disabled.
MEM window: fb500000-fb5fffff
PREFETCH window 0x00000000e9b00000-0x00000000e9bfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:15.0 to 64
PCI: Setting latency timer of device 0000:00:15.1 to 64
PCI: Setting latency timer of device 0000:00:15.2 to 64
PCI: Setting latency timer of device 0000:00:15.3 to 64
PCI: Setting latency timer of device 0000:00:15.4 to 64
PCI: Setting latency timer of device 0000:00:15.5 to 64
PCI: Setting latency timer of device 0000:00:15.6 to 64
PCI: Setting latency timer of device 0000:00:15.7 to 64
PCI: Setting latency timer of device 0000:00:16.0 to 64
PCI: Setting latency timer of device 0000:00:16.1 to 64
PCI: Setting latency timer of device 0000:00:16.2 to 64
PCI: Setting latency timer of device 0000:00:16.3 to 64
PCI: Setting latency timer of device 0000:00:16.4 to 64
PCI: Setting latency timer of device 0000:00:16.5 to 64
PCI: Setting latency timer of device 0000:00:16.6 to 64
PCI: Setting latency timer of device 0000:00:16.7 to 64
PCI: Setting latency timer of device 0000:00:17.0 to 64
PCI: Setting latency timer of device 0000:00:17.1 to 64
PCI: Setting latency timer of device 0000:00:17.2 to 64
PCI: Setting latency timer of device 0000:00:17.3 to 64
PCI: Setting latency timer of device 0000:00:17.4 to 64
PCI: Setting latency timer of device 0000:00:17.5 to 64
PCI: Setting latency timer of device 0000:00:17.6 to 64
PCI: Setting latency timer of device 0000:00:17.7 to 64
PCI: Setting latency timer of device 0000:00:18.0 to 64
PCI: Setting latency timer of device 0000:00:18.1 to 64
PCI: Setting latency timer of device 0000:00:18.2 to 64
PCI: Setting latency timer of device 0000:00:18.3 to 64
PCI: Setting latency timer of device 0000:00:18.4 to 64
PCI: Setting latency timer of device 0000:00:18.5 to 64
PCI: Setting latency timer of device 0000:00:18.6 to 64
PCI: Setting latency timer of device 0000:00:18.7 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x80
audit: initializing netlink socket (disabled)
type=2000 audit(1431089060.405:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 6EAAB8D1F2786914
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
Boot video device is 0000:00:0f.0
PCI: Setting latency timer of device 0000:00:15.0 to 64
PCI: Setting latency timer of device 0000:00:15.1 to 64
PCI: Setting latency timer of device 0000:00:15.2 to 64
PCI: Setting latency timer of device 0000:00:15.3 to 64
PCI: Setting latency timer of device 0000:00:15.4 to 64
PCI: Setting latency timer of device 0000:00:15.5 to 64
PCI: Setting latency timer of device 0000:00:15.6 to 64
PCI: Setting latency timer of device 0000:00:15.7 to 64
PCI: Setting latency timer of device 0000:00:16.0 to 64
PCI: Setting latency timer of device 0000:00:16.1 to 64
PCI: Setting latency timer of device 0000:00:16.2 to 64
PCI: Setting latency timer of device 0000:00:16.3 to 64
PCI: Setting latency timer of device 0000:00:16.4 to 64
PCI: Setting latency timer of device 0000:00:16.5 to 64
PCI: Setting latency timer of device 0000:00:16.6 to 64
PCI: Setting latency timer of device 0000:00:16.7 to 64
PCI: Setting latency timer of device 0000:00:17.0 to 64
PCI: Setting latency timer of device 0000:00:17.1 to 64
PCI: Setting latency timer of device 0000:00:17.2 to 64
PCI: Setting latency timer of device 0000:00:17.3 to 64
PCI: Setting latency timer of device 0000:00:17.4 to 64
PCI: Setting latency timer of device 0000:00:17.5 to 64
PCI: Setting latency timer of device 0000:00:17.6 to 64
PCI: Setting latency timer of device 0000:00:17.7 to 64
PCI: Setting latency timer of device 0000:00:18.0 to 64
PCI: Setting latency timer of device 0000:00:18.1 to 64
PCI: Setting latency timer of device 0000:00:18.2 to 64
PCI: Setting latency timer of device 0000:00:18.3 to 64
PCI: Setting latency timer of device 0000:00:18.4 to 64
PCI: Setting latency timer of device 0000:00:18.5 to 64
PCI: Setting latency timer of device 0000:00:18.6 to 64
PCI: Setting latency timer of device 0000:00:18.7 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 256M @ 0x0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1060-0x1067, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1068-0x106f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 530k
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Fusion MPT base driver 3.04.20rh
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20rh
GSI 16 sharing vector 0x33 and IRQ 16
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 51
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 B0: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=51
Vendor: VMware Model: Virtual disk Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
target0:0:0: Beginning Domain Validation
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
SCSI device sda: 67108864 512-byte hdwr sectors (34360 MB)
sda: Write Protect is off
sda: Mode Sense: 61 00 00 00
sda: cache data unavailable
sda: assuming drive cache: write through
SCSI device sda: 67108864 512-byte hdwr sectors (34360 MB)
sda: Write Protect is off
sda: Mode Sense: 61 00 00 00
sda: cache data unavailable
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
VMware vmxnet3 virtual NIC driver - version 1.2.39.0-NAPI
VMware PVSCSI driver - version 1.1.2.0
VMware vmxnet virtual NIC driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1431089084.310:2): selinux=0 auid=4294967295 ses=4294967295
[1262]: VMCI: shared components initialized.
Probing for vmci/PCI.
GSI 17 sharing vector 0x3B and IRQ 17
ACPI: PCI Interrupt 0000:00:07.7[A] -> GSI 16 (level, low) -> IRQ 59
Found vmci/PCI at 0x1080, irq 59.
VMCI: using capabilities 0xc.
[1262]: VMCI: Host capability check passed.
Registered vmci device.
[1262]: VMCI: Using guest personality
[1262]: VMCI: host components initialized.
[1262]: VMCI: Module registered (name=vmci, major=10, minor=59).
[1262]: VMCI: Using host personality
[1262]: VMCI: Module (name=vmci) is initialized
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
input: PC Speaker as /class/input/input2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
GSI 18 sharing vector 0x4B and IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 75
PCI: Setting latency timer of device 0000:02:00.0 to 64
e1000: 0000:02:00.0: e1000_probe: (PCI:66MHz:32-bit) 00:50:56:ad:11:a4
hdc: ATAPI 1X DVD-ROM DVD-R-RAM CD-R/RW drive, 32kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
sd 0:0:0:0: Attached scsi generic sg0 type 0
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: AC Adapter [ACAD] (on-line)
Hotplug Mem Device
Hotplug Mem Device
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 10241428k swap on /dev/sda3. Priority:-1 extents:1 across:10241428k
IA-32 Microcode Update Driver: v1.14a
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [32] registered
acpiphp: Slot [33] registered
acpiphp: Slot [34] registered
acpiphp: Slot [35] registered
acpiphp: Slot [36] registered
acpiphp: Slot [37] registered
acpiphp: Slot [38] registered
acpiphp: Slot [39] registered
acpiphp: Slot [40] registered
acpiphp: Slot [41] registered
acpiphp: Slot [42] registered
acpiphp: Slot [43] registered
acpiphp: Slot [44] registered
acpiphp: Slot [45] registered
acpiphp: Slot [46] registered
acpiphp: Slot [47] registered
acpiphp: Slot [48] registered
acpiphp: Slot [49] registered
acpiphp: Slot [50] registered
acpiphp: Slot [51] registered
acpiphp: Slot [52] registered
acpiphp: Slot [53] registered
acpiphp: Slot [54] registered
acpiphp: Slot [55] registered
acpiphp: Slot [56] registered
acpiphp: Slot [57] registered
acpiphp: Slot [58] registered
acpiphp: Slot [59] registered
acpiphp: Slot [60] registered
acpiphp: Slot [61] registered
acpiphp: Slot [62] registered
acpiphp: Slot [63] registered
acpiphp: Slot [160] registered
acpiphp: Slot [192] registered
acpiphp: Slot [224] registered
acpiphp: Slot [256] registered
acpiphp: Slot [161] registered
acpiphp: Slot [162] registered
acpiphp: Slot [163] registered
acpiphp: Slot [164] registered
acpiphp: Slot [165] registered
acpiphp: Slot [166] registered
acpiphp: Slot [167] registered
acpiphp: Slot [193] registered
acpiphp: Slot [194] registered
acpiphp: Slot [195] registered
acpiphp: Slot [196] registered
acpiphp: Slot [197] registered
acpiphp: Slot [198] registered
acpiphp: Slot [199] registered
acpiphp: Slot [225] registered
acpiphp: Slot [226] registered
acpiphp: Slot [227] registered
acpiphp: Slot [228] registered
acpiphp: Slot [229] registered
acpiphp: Slot [230] registered
acpiphp: Slot [231] registered
acpiphp: Slot [257] registered
acpiphp: Slot [258] registered
acpiphp: Slot [259] registered
acpiphp: Slot [260] registered
acpiphp: Slot [261] registered
acpiphp: Slot [262] registered
acpiphp: Slot [263] registered
vmmemctl: started kernel thread pid=2846
VMware memory control driver initialized
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec