dmesg - umdsecan-lxle
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-80-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #116-Ubuntu SMP Mon Mar 23 17:11:32 UTC 2015 (Ubuntu 3.2.0-80.116-generic 3.2.68)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
NX (Execute Disable) protection: approximated by x86 segment limits
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [c009fff0] 9fff0
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000
RAMDISK: 35a56000 - 36d23000
ACPI: RSDP 000e0000 00024 (v02 VBOX )
ACPI: XSDT 7fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 7fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 7fff0470 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 7fff0200 00040
ACPI: APIC 7fff0240 0005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 7fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fff0
On node 0 totalpages: 524159
free_area_init_node: node 0, pgdat c1831fc0, node_mem_map f4a56200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294626 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ffc0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f77d7000 s31680 r0 d21568 u53248
pcpu-alloc: s31680 r0 d21568 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 8388096 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007fff0)
Memory: 2041772k/2097088k available (5654k kernel code, 54864k reserved, 2787k data, 720k init, 1187784k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc183f000 - 0xc18f3000 ( 720 kB)
.data : 0xc1585884 - 0xc183e700 (2787 kB)
.text : 0xc1000000 - 0xc1585884 (5654 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f4408000 soft=f440a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3069.769 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6139.53 BogoMIPS (lpj=12279076)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 25554 entries in 51 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz stepping 03
Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
CPU 1 irqstacks, hard=f44ac000 soft=f44ae000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
mce: CPU supports 0 MCE banks
TSC synchronization [CPU#0 -> CPU#1]:
Measured 470043 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog disabled (cpu1): hardware events not enabled
Brought up 2 CPUs
Total of 2 processors activated (12308.01 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 21:54:46, date: 05/03/15
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
PCI: Using configuration type 1 for base access
Trying to unpack rootfs image as initramfs...
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 0 class 0x000401
pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007fff0000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xffdfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [irq 1]
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:04: [io 0x0378-0x037f]
pnp 00:04: [io 0x0778-0x077f]
pnp 00:04: [irq 7]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:06.0: PCI INT A disabled
PCI: CLS 0 bytes, default 64
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1430690086.304:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1667
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Freeing initrd memory: 19252k freed
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
ata_piix 0000:00:01.1: version 2.13
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
usb 1-1: new full-speed USB device number 2 using ohci_hcd
ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ata3.00: configured for UDMA/33
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 15:337:954
rtc_cmos rtc_cmos: setting system clock to 2015-05-03 21:54:47 UTC (1430690087)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 134217728 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sda: sda1 sda2 < sda5 >
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 720k freed
Write protecting the kernel text: 5656k
Write protecting the kernel read-only data: 2340k
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
udevd[99]: starting version 175
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Adding 1030868k swap on /dev/zram0. Priority:100 extents:1 across:1030868k SS
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input3
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:9d:94:28
e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: your processor doesn't support write-combining
vesafb: framebuffer at 0xe0000000, mapped to 0xf8300000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
Btrfs loaded
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 18221.000 MB/sec
xor: using function: pIII_sse (18221.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[415]: starting version 175
lp: driver loaded but no devices found
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: Failed to spawn connman main process: unable to execute: No such file or directory
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1430690091.897:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=606 comm="apparmor_parser"
type=1400 audit(1430690091.901:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=606 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1430690091.917:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=617 comm="apparmor_parser"
type=1400 audit(1430690091.921:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
type=1400 audit(1430690091.921:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser"
type=1400 audit(1430690091.921:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=625 comm="apparmor_parser"
psmouse serio1: hgpk: ID: 10 00 64
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: failsafe main process (682) killed by TERM signal
type=1400 audit(1430690092.085:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=806 comm="apparmor_parser"
type=1400 audit(1430690092.085:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=805 comm="apparmor_parser"
type=1400 audit(1430690092.085:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
type=1400 audit(1430690092.089:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=805 comm="apparmor_parser"
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
device-mapper: multipath: version 1.3.2 loaded
microcode: CPU0 sig=0x306c3, pf=0x1, revision=0x0
snd_intel8x0 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
microcode: CPU1 sig=0x306c3, pf=0x1, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
init: alsa-restore main process (954) terminated with status 19
Cannot change disksize for initialized device
init: zram-config pre-start process (956) terminated with status 1
intel8x0_measure_ac97_clock: measured 55299 usecs (6239 samples)
intel8x0: measured clock 112823 rejected
Non-volatile memory driver v1.3
intel8x0_measure_ac97_clock: measured 58795 usecs (7680 samples)
intel8x0: measured clock 130623 rejected
intel8x0_measure_ac97_clock: measured 55684 usecs (7200 samples)
intel8x0: measured clock 129301 rejected
intel8x0: clocking to 48000
init: plymouth-stop pre-start process (1855) terminated with status 1
eth0: no IPv6 routers present
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
audit_printk_skb: 42 callbacks suppressed
type=1400 audit(1430690551.372:26): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=15848 comm="apparmor_parser"
type=1400 audit(1430690553.028:27): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=15933 comm="apparmor_parser"