dmesg - lab01-network-report
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-34-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 (Ubuntu 3.13.0-34.60-generic 3.13.11.4)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-34-generic root=/dev/mapper/vg0-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fffdfff] usable
BIOS-e820: [mem 0x000000003fffe000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Bochs Bochs, BIOS Bochs 01/01/2007
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x3fffe max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
found SMP MP-table at [mem 0x000fdaf0-0x000fdaff] mapped at [ffff8800000fdaf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[mem 0x3fc00000-0x3fdfffff] page 2M
init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
[mem 0x3c000000-0x3fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3bffffff] page 2M
init_memory_mapping: [mem 0x3fe00000-0x3fffdfff]
[mem 0x3fe00000-0x3fffdfff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x35a1e000-0x36d06fff]
ACPI: RSDP 00000000000fd990 000014 (v00 BOCHS )
ACPI: RSDT 000000003fffe5b0 000038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000003fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000003fffe5f0 001121 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 000000003fffff40 000040
ACPI: SSDT 000000003ffffea0 00009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000003ffffdb0 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000003ffffd70 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: SSDT 000000003ffff720 000644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003fffdfff]
Initmem setup node 0 [mem 0x00000000-0x3fffdfff]
NODE_DATA [mem 0x3fff9000-0x3fffdfff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:3fff5001, boot clock
[ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x3fffdfff]
On node 0 totalpages: 262042
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 258046 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x40000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88003fc00000 s86336 r8192 d24256 u2097152
pcpu-alloc: s86336 r8192 d24256 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
kvm-clock: cpu 0, msr 0:3fff5001, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 3fc0dfc0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 257925
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-34-generic root=/dev/mapper/vg0-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 995656K/1048168K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 52512K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0.
NR_IRQS:16640 nr_irqs:256 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Detected 2599.998 MHz processor
Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=10399992)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01)
TSC deadline timer enabled
Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (5199.99 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:18:44, date: 04/29/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
NMI watchdog: disabled (cpu0): hardware events not enabled
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc0c0-0xc0cf]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc080-0xc09f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
pci 0000:00:05.0: [1af4:1002] type 00 class 0x00ff00
pci 0000:00:05.0: reg 0x10: [io 0xc0a0-0xc0bf]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
ACPI: Enabled 16 GPEs in block 00 to 0F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fffe000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switched to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19364K (ffff880035a1e000 - ffff880036d07000)
microcode: CPU0 sig=0x206a1, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1430317126.219:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1982
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 42
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
blk-mq: CPU -> queue map
CPU 0 -> Queue 0
vda: unknown partition table
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-34-generic uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 500bc5c87d4b115cf3c1504f7a92e233c6143d58'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 11:921:334
tty tty55: hash matches
rtc_cmos 00:00: setting system clock to 2015-04-29 14:18:45 UTC (1430317125)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.01: NODEV after polling detection
ata1.00: ATA-7: QEMU HARDDISK, 1.2.0, max UDMA/100
ata1.00: 20971520 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.2. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
ata2.01: NODEV after polling detection
ata2.00: ATAPI: QEMU DVD-ROM, 1.2.0, max UDMA/100
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.00: configured for MWDMA2
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.2. PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[96]: starting version 204
FDC 0 is a S82078B
usb 1-1: new full-speed USB device number 2 using uhci_hcd
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 02:00:4f:6f:00:0a
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
random: lvm urandom read with 38 bits of entropy available
tsc: Refined TSC clocksource calibration: 2599.941 MHz
bio: create slab at 1
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
init: plymouth-upstart-bridge main process (177) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (190) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (194) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (196) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (199) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (204) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
random: nonblocking pool is initialized
Adding 3997692k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:3997692k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
systemd-udevd[314]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[drm] Initialized drm 1.1.0 20060810
[TTM] Zone kernel: Available graphics memory: 508950 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] fb mappable at 0x0
[drm] vram aper at 0x0
[drm] size 0
[drm] fb depth is 24
[drm] pitch is 3072
fbcon: cirrusdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
cirrus 0000:00:02.0: registered panic notifier
type=1400 audit(1430317134.682:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
type=1400 audit(1430317134.682:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1430317134.682:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
intel_rapl: no valid rapl domains found in package 0
[drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1400 audit(1430317135.210:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=445 comm="apparmor_parser"
type=1400 audit(1430317135.218:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=445 comm="apparmor_parser"
type=1400 audit(1430317135.218:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=445 comm="apparmor_parser"
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (586) killed by TERM signal
type=1400 audit(1430317144.682:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=899 comm="apparmor_parser"
type=1400 audit(1430317144.682:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
type=1400 audit(1430317144.682:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
type=1400 audit(1430317144.682:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
type=1400 audit(1430317144.682:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
type=1400 audit(1430317144.682:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
type=1400 audit(1430317145.050:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=904 comm="apparmor_parser"
init: irqbalance main process (973) terminated with status 127
init: plymouth-upstart-bridge main process (207) killed by TERM signal
vda: vda1
EXT4-fs (dm-3): resizing filesystem from 990208 to 14096384 blocks
EXT4-fs (dm-3): resized filesystem to 14096384
atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 ' to make it known.
init: upstart-udev-bridge main process (308) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (436) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (600) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:06.0: reg 0x10: [io 0x0000-0x003f]
pci 0000:00:06.0: reg 0x14: [mem 0x00000000-0x00000fff]
pci 0000:00:06.0: BAR 1: assigned [mem 0x40000000-0x40000fff]
pci 0000:00:06.0: BAR 0: assigned [io 0x1000-0x103f]
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
cirrus 0000:00:02.0: no hotplug settings from platform
cirrus 0000:00:02.0: using default PCI settings
e1000 0000:00:03.0: no hotplug settings from platform
e1000 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
pci 0000:00:06.0: no hotplug settings from platform
pci 0000:00:06.0: using default PCI settings
virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
virtio-pci 0000:00:06.0: irq 42 for MSI/MSI-X
virtio-pci 0000:00:06.0: irq 43 for MSI/MSI-X
blk-mq: CPU -> queue map
CPU 0 -> Queue 0
vdb: unknown partition table
ACPI: Error installing CMOS-RTC region handler
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
cirrus 0000:00:02.0: no hotplug settings from platform
cirrus 0000:00:02.0: using default PCI settings
e1000 0000:00:03.0: no hotplug settings from platform
e1000 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
virtio-pci 0000:00:06.0: no hotplug settings from platform
virtio-pci 0000:00:06.0: using default PCI settings
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
cirrus 0000:00:02.0: no hotplug settings from platform
cirrus 0000:00:02.0: using default PCI settings
e1000 0000:00:03.0: no hotplug settings from platform
e1000 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
virtio-pci 0000:00:06.0: no hotplug settings from platform
virtio-pci 0000:00:06.0: using default PCI settings
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
cirrus 0000:00:02.0: no hotplug settings from platform
cirrus 0000:00:02.0: using default PCI settings
e1000 0000:00:03.0: no hotplug settings from platform
e1000 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
virtio-pci 0000:00:06.0: no hotplug settings from platform
virtio-pci 0000:00:06.0: using default PCI settings
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
cirrus 0000:00:02.0: no hotplug settings from platform
cirrus 0000:00:02.0: using default PCI settings
e1000 0000:00:03.0: no hotplug settings from platform
e1000 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
virtio-pci 0000:00:06.0: no hotplug settings from platform
virtio-pci 0000:00:06.0: using default PCI settings
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
pci 0000:00:01.0: no hotplug settings from platform
pci 0000:00:01.0: using default PCI settings
ata_piix 0000:00:01.1: no hotplug settings from platform
ata_piix 0000:00:01.1: using default PCI settings
uhci_hcd 0000:00:01.2: no hotplug settings from platform
uhci_hcd 0000:00:01.2: using default PCI settings
piix4_smbus 0000:00:01.3: no hotplug settings from platform
piix4_smbus 0000:00:01.3: using default PCI settings
cirrus 0000:00:02.0: no hotplug settings from platform
cirrus 0000:00:02.0: using default PCI settings
e1000 0000:00:03.0: no hotplug settings from platform
e1000 0000:00:03.0: using default PCI settings
virtio-pci 0000:00:04.0: no hotplug settings from platform
virtio-pci 0000:00:04.0: using default PCI settings
virtio-pci 0000:00:05.0: no hotplug settings from platform
virtio-pci 0000:00:05.0: using default PCI settings
virtio-pci 0000:00:06.0: no hotplug settings from platform
virtio-pci 0000:00:06.0: using default PCI settings
vdb: vdb1
EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
crafty[32284]: segfault at 0 ip 00007fb35a2084e0 sp 00007fffaca18a08 error 4 in libc-2.19.so[7fb35a197000+1bb000]
crafty[32287]: segfault at 0 ip 00007f5509ab54e0 sp 00007fffa6d570f8 error 4 in libc-2.19.so[7f5509a44000+1bb000]
crafty[32290]: segfault at 0 ip 00007fc0f76304e0 sp 00007fffa8d87388 error 4 in libc-2.19.so[7fc0f75bf000+1bb000]
atkbd serio0: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x0 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 00 ' to make it known.