dmesg - rd350-apache
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-123.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Mon Jun 30 12:09:22 UTC 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000760fafff] usable
BIOS-e820: [mem 0x00000000760fb000-0x00000000766cffff] reserved
BIOS-e820: [mem 0x00000000766d0000-0x000000007671ffff] ACPI data
BIOS-e820: [mem 0x0000000076720000-0x0000000077670fff] ACPI NVS
BIOS-e820: [mem 0x0000000077671000-0x000000007bd33fff] reserved
BIOS-e820: [mem 0x000000007bd34000-0x000000007bd3dfff] usable
BIOS-e820: [mem 0x000000007bd3e000-0x000000007bd3efff] reserved
BIOS-e820: [mem 0x000000007bd3f000-0x000000007bd41fff] usable
BIOS-e820: [mem 0x000000007bd42000-0x000000007bd42fff] reserved
BIOS-e820: [mem 0x000000007bd43000-0x000000007bd43fff] usable
BIOS-e820: [mem 0x000000007bd44000-0x000000007bdc9fff] reserved
BIOS-e820: [mem 0x000000007bdca000-0x000000007bffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
e820: update [mem 0x295d3018-0x295ea257] usable ==> usable
e820: update [mem 0x295c2018-0x295d2657] usable ==> usable
e820: update [mem 0x295b1018-0x295c1657] usable ==> usable
e820: update [mem 0x295a0018-0x295b0057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x00000000295a0017] usable
reserve setup_data: [mem 0x00000000295a0018-0x00000000295b0057] usable
reserve setup_data: [mem 0x00000000295b0058-0x00000000295b1017] usable
reserve setup_data: [mem 0x00000000295b1018-0x00000000295c1657] usable
reserve setup_data: [mem 0x00000000295c1658-0x00000000295c2017] usable
reserve setup_data: [mem 0x00000000295c2018-0x00000000295d2657] usable
reserve setup_data: [mem 0x00000000295d2658-0x00000000295d3017] usable
reserve setup_data: [mem 0x00000000295d3018-0x00000000295ea257] usable
reserve setup_data: [mem 0x00000000295ea258-0x00000000760fafff] usable
reserve setup_data: [mem 0x00000000760fb000-0x00000000766cffff] reserved
reserve setup_data: [mem 0x00000000766d0000-0x000000007671ffff] ACPI data
reserve setup_data: [mem 0x0000000076720000-0x0000000077670fff] ACPI NVS
reserve setup_data: [mem 0x0000000077671000-0x000000007bd33fff] reserved
reserve setup_data: [mem 0x000000007bd34000-0x000000007bd3dfff] usable
reserve setup_data: [mem 0x000000007bd3e000-0x000000007bd3efff] reserved
reserve setup_data: [mem 0x000000007bd3f000-0x000000007bd41fff] usable
reserve setup_data: [mem 0x000000007bd42000-0x000000007bd42fff] reserved
reserve setup_data: [mem 0x000000007bd43000-0x000000007bd43fff] usable
reserve setup_data: [mem 0x000000007bd44000-0x000000007bdc9fff] reserved
reserve setup_data: [mem 0x000000007bdca000-0x000000007bffffff] usable
reserve setup_data: [mem 0x0000000080000000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x766e0000 ACPI 2.0=0x766e0000 SMBIOS=0xf0560 MPS=0xfd620
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000009000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000009000-0x000000000003f000) (0MB)
efi: mem03: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem04: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x000000000223f000) (18MB)
efi: mem07: type=7, attr=0xf, range=[0x000000000223f000-0x00000000295a0000) (627MB)
efi: mem08: type=2, attr=0xf, range=[0x00000000295a0000-0x000000003edbd000) (344MB)
efi: mem09: type=1, attr=0xf, range=[0x000000003edbd000-0x000000003eef5000) (1MB)
efi: mem10: type=4, attr=0xf, range=[0x000000003eef5000-0x0000000062f75000) (576MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000062f75000-0x00000000759ec000) (298MB)
efi: mem12: type=3, attr=0xf, range=[0x00000000759ec000-0x00000000760fb000) (7MB)
efi: mem13: type=0, attr=0xf, range=[0x00000000760fb000-0x00000000766d0000) (5MB)
efi: mem14: type=9, attr=0xf, range=[0x00000000766d0000-0x0000000076720000) (0MB)
efi: mem15: type=10, attr=0xf, range=[0x0000000076720000-0x0000000077671000) (15MB)
efi: mem16: type=6, attr=0x800000000000000f, range=[0x0000000077671000-0x000000007bccb000) (70MB)
efi: mem17: type=5, attr=0x800000000000000f, range=[0x000000007bccb000-0x000000007bd34000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x000000007bd34000-0x000000007bd35000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x000000007bd35000-0x000000007bd3e000) (0MB)
efi: mem20: type=6, attr=0x800000000000000f, range=[0x000000007bd3e000-0x000000007bd3f000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x000000007bd3f000-0x000000007bd42000) (0MB)
efi: mem22: type=6, attr=0x800000000000000f, range=[0x000000007bd42000-0x000000007bd43000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x000000007bd43000-0x000000007bd44000) (0MB)
efi: mem24: type=6, attr=0x800000000000000f, range=[0x000000007bd44000-0x000000007bdca000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x000000007bdca000-0x000000007c000000) (2MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000100000000-0x0000000280000000) (6144MB)
efi: mem27: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
efi: mem28: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: LENOVO ThinkServer RD350/ThinkServer RD350, BIOS VB3TS110 10/05/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd950-0x000fd95f] mapped at [ffff8800000fd950]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e1d000, 0x01e1dfff] PGTABLE
BRK [0x01e1e000, 0x01e1efff] PGTABLE
BRK [0x01e1f000, 0x01e1ffff] PGTABLE
init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[mem 0x27fe00000-0x27fffffff] page 1G
init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
[mem 0x27c000000-0x27fdfffff] page 1G
init_memory_mapping: [mem 0x200000000-0x27bffffff]
[mem 0x200000000-0x27bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x760fafff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x75ffffff] page 2M
[mem 0x76000000-0x760fafff] page 4k
init_memory_mapping: [mem 0x7bd34000-0x7bd3dfff]
[mem 0x7bd34000-0x7bd3dfff] page 4k
BRK [0x01e20000, 0x01e20fff] PGTABLE
init_memory_mapping: [mem 0x7bd3f000-0x7bd41fff]
[mem 0x7bd3f000-0x7bd41fff] page 4k
init_memory_mapping: [mem 0x7bd43000-0x7bd43fff]
[mem 0x7bd43000-0x7bd43fff] page 4k
init_memory_mapping: [mem 0x7bdca000-0x7bffffff]
[mem 0x7bdca000-0x7bdfffff] page 4k
[mem 0x7be00000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x295eb000-0x2a68afff]
Reserving 161MB of memory at 720MB for crashkernel (System RAM: 8034MB)
ACPI: RSDP 00000000766e0000 00024 (v02 LENOVO)
ACPI: XSDT 00000000766e00b8 000EC (v01 LENOVO SV-INT 00000110 AMI 00010013)
ACPI: FACP 000000007670d6b8 0010C (v05 LENOVO SV-INT 00000110 AMI 00010013)
ACPI: DSDT 00000000766e0230 2D486 (v02 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: FACS 000000007766ef80 00040
ACPI: APIC 000000007670d7c8 00100 (v03 LENOVO SV-INT 00000110 AMI 00010013)
ACPI: FPDT 000000007670d8c8 00044 (v01 LENOVO SV-INT 00000110 AMI 00010013)
ACPI: FIDT 000000007670d910 0009C (v01 LENOVO SV-INT 00000110 AMI 00010013)
ACPI: SPMI 000000007670d9b0 00040 (v05 LENOVO SV-INT 00000110 AMI. 00000000)
ACPI: TCPA 000000007670d9f0 00032 (v02 LENOVO SV-INT 00000110 MSFT 01000013)
ACPI: MCFG 000000007670da28 0003C (v01 LENOVO SV-INT 00000110 MSFT 00000097)
ACPI: UEFI 000000007670da68 00042 (v01 LENOVO SV-INT 00000110 00000000)
ACPI: BDAT 000000007670dab0 00030 (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: HPET 000000007670dae0 00038 (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: MSCT 000000007670db18 00090 (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: PMCT 000000007670dba8 00064 (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: SLIT 000000007670dc10 0002D (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: SRAT 000000007670dc40 00E58 (v03 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: WDDT 000000007670ea98 00040 (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: SSDT 000000007670ead8 0ED6D (v01 LENOVO PmMgt 00000110 INTL 20120913)
ACPI: SLIC 000000007671d848 00176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 00000110 AMI 00010013)
ACPI: SSDT 000000007671d9c0 01BAF (v02 LENOVO SpsNm 00000110 INTL 20120913)
ACPI: SSDT 000000007671f570 00064 (v02 LENOVO SpsNvs 00000110 INTL 20120913)
ACPI: PRAD 000000007671f5d8 00102 (v02 LENOVO SV-INT 00000110 INTL 20120913)
ACPI: DMAR 000000007671f6e0 000E6 (v01 LENOVO SV-INT 00000110 INTL 20091013)
ACPI: HEST 000000007671f7c8 002BC (v01 LENOVO SV-INT 00000110 INTL 00000001)
ACPI: BERT 000000007671fa88 00030 (v01 LENOVO SV-INT 00000110 INTL 00000001)
ACPI: ERST 000000007671fab8 00230 (v01 LENOVO SV-INT 00000110 INTL 00000001)
ACPI: EINJ 000000007671fce8 00150 (v01 LENOVO SV-INT 00000110 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x27fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x27fffffff] -> [mem 0x00000000-0x27fffffff]
Initmem setup node 0 [mem 0x00000000-0x27fffffff]
NODE_DATA [mem 0x27ffd6000-0x27fffcfff]
[ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x27fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x760fafff]
node 0: [mem 0x7bd34000-0x7bd3dfff]
node 0: [mem 0x7bd3f000-0x7bd41fff]
node 0: [mem 0x7bd43000-0x7bd43fff]
node 0: [mem 0x7bdca000-0x7bffffff]
node 0: [mem 0x100000000-0x27fffffff]
On node 0 totalpages: 2056926
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7501 pages used for memmap
DMA32 zone: 480063 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x295a0000-0x295a0fff]
PM: Registered nosave memory: [mem 0x295b0000-0x295b0fff]
PM: Registered nosave memory: [mem 0x295b1000-0x295b1fff]
PM: Registered nosave memory: [mem 0x295c1000-0x295c1fff]
PM: Registered nosave memory: [mem 0x295c2000-0x295c2fff]
PM: Registered nosave memory: [mem 0x295d2000-0x295d2fff]
PM: Registered nosave memory: [mem 0x295d3000-0x295d3fff]
PM: Registered nosave memory: [mem 0x295ea000-0x295eafff]
PM: Registered nosave memory: [mem 0x760fb000-0x766cffff]
PM: Registered nosave memory: [mem 0x766d0000-0x7671ffff]
PM: Registered nosave memory: [mem 0x76720000-0x77670fff]
PM: Registered nosave memory: [mem 0x77671000-0x7bd33fff]
PM: Registered nosave memory: [mem 0x7bd3e000-0x7bd3efff]
PM: Registered nosave memory: [mem 0x7bd42000-0x7bd42fff]
PM: Registered nosave memory: [mem 0x7bd44000-0x7bdc9fff]
PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88027fc00000 s86592 r8192 d24000 u131072
pcpu-alloc: s86592 r8192 d24000 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2024761
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 7232124k/10485760k available (6105k kernel code, 2258056k absent, 995580k reserved, 4065k data, 1584k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=12.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-11.
NR_IRQS:327936 nr_irqs:1184 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.219 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.43 BogoMIPS (lpj=2394219)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0x77671000-0x7bccafff]
[mem 0x77671000-0x777fffff] page 4k
[mem 0x77800000-0x7bbfffff] page 2M
[mem 0x7bc00000-0x7bccafff] page 4k
init_memory_mapping: [mem 0x7bccb000-0x7bd33fff]
[mem 0x7bccb000-0x7bd33fff] page 4k
init_memory_mapping: [mem 0x7bd3e000-0x7bd3efff]
[mem 0x7bd3e000-0x7bd3efff] page 4k
init_memory_mapping: [mem 0x7bd42000-0x7bd42fff]
[mem 0x7bd42000-0x7bd42fff] page 4k
init_memory_mapping: [mem 0x7bd44000-0x7bdc9fff]
[mem 0x7bd44000-0x7bdc9fff] page 4k
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 23383 entries in 92 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000007bba4000 end: 0x0000007bbb3fff
dmar: RMRR base: 0x00000078604000 end: 0x0000007a604fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 OK
Brought up 12 CPUs
smpboot: Total of 12 processors activated (57461.25 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x76720000-0x77670fff] (16060416 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD (null) 00102 (v02 LENOVO SV-INT 00000110 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: PCIe AER handled by firmware
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb42c000-0xfb42ffff 64bit]
pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb428000-0xfb42bfff 64bit]
pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb424000-0xfb427fff 64bit]
pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb420000-0xfb423fff 64bit]
pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb41c000-0xfb41ffff 64bit]
pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb418000-0xfb41bfff 64bit]
pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb414000-0xfb417fff 64bit]
pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb410000-0xfb413fff 64bit]
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb439000-0xfb439fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb438000-0xfb4387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb400000-0xfb40ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb437000-0xfb43700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb436000-0xfb43600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb434000-0xfb4343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:8d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb433000-0xfb4333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb432000-0xfb4327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb431000-0xfb4310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1000:0073] type 00 class 0x010400
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x14: [mem 0xfb360000-0xfb363fff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xfb300000-0xfb33ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfb340000-0xfb35ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfb100000-0xfb17ffff]
pci 0000:07:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:07:00.0: reg 0x1c: [mem 0xfb180000-0xfb183fff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:08:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.7: PCI bridge to [bus 08-09]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:09:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:09:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:09:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:09:00.0: reg 0x18: [io 0xb000-0xb07f]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:08:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.UNC0: notify handler is installed
ACPI: \_SB_.PCI0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:09:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: no compatible bridge window for [mem 0x00000010-0x0000001f pref]
e820: reserve RAM buffer [mem 0x295a0018-0x2bffffff]
e820: reserve RAM buffer [mem 0x295b1018-0x2bffffff]
e820: reserve RAM buffer [mem 0x295c2018-0x2bffffff]
e820: reserve RAM buffer [mem 0x295d3018-0x2bffffff]
e820: reserve RAM buffer [mem 0x760fb000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7bd3e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd42000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd44000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x0580-0x059f] has been reserved
system 00:06: [io 0x0600-0x061f] has been reserved
system 00:06: [io 0x0880-0x0883] has been reserved
system 00:06: [io 0x0800-0x081f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: [io 0x0a40-0x0a4f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.3: BAR 0: [mem 0x00000010-0x0000001f pref] conflicts with reserved [mem 0x00000000-0x00000fff]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.2: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:08:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.7: PCI bridge to [bus 08-09]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:09:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17024k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x719ec000-0x759ec000] (64MB) mapped at [ffff8800719ec000-ffff8800759ebfff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1429533392.649:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15330
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:03.2: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 72 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xfa000000, mapped to 0xffffc90022180000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:0a: 1.2 TPM (device-id 0xFE, rev-id 71)
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb434000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb433000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-6: new full-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2394.455 MHz
Switching to clocksource tsc
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usb 3-6: New USB device found, idVendor=046d, idProduct=c52f
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: USB Receiver
usb 3-6: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input2
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/input/input3
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:02: setting system clock to 2015-04-20 12:36:34 UTC (1429533394)
Freeing unused kernel memory: 1584k freed
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 3-7: new low-speed USB device number 3 using xhci_hcd
usb 3-7: New USB device found, idVendor=1a2c, idProduct=0021
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-7: Product: USB Keykoard
usb 3-7: Manufacturer: USB
usb 3-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-7: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input4
hid-generic 0003:1A2C:0021.0003: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-7/input0
systemd-journald[169]: Vacuuming done, freed 0 bytes
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
systemd-udevd[325]: starting version 208
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
megasas: 0x1000:0x0073:0x1000:0x9240: bus 2:slot 0:func 0
megasas: FW now in Ready state
megaraid_sas 0000:02:00.0: irq 73 for MSI/MSI-X
megaraid_sas 0000:02:00.0: [scsi0]: FW supports MSIX vector,Online CPUs: ,Current MSIX
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ACPI: bus type ATA registered
libata version 3.00 loaded.
PTP clock support registered
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: irq 74 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
[drm] Initialized drm 1.1.0 20060810
scsi1 : ahci
scsi2 : ahci
igb 0000:06:00.0: irq 75 for MSI/MSI-X
igb 0000:06:00.0: irq 76 for MSI/MSI-X
igb 0000:06:00.0: irq 77 for MSI/MSI-X
igb 0000:06:00.0: irq 78 for MSI/MSI-X
igb 0000:06:00.0: irq 79 for MSI/MSI-X
scsi3 : ahci
scsi4 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438200 irq 74
ata4: DUMMY
ahci 0000:00:1f.2: irq 80 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[drm] AST 2300 detected
[drm] dram 1632000000 6 16 01000000
[TTM] Zone kernel: Available graphics memory: 3925320 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
scsi5 : ahci
checking generic (fa000000 300000) vs hw (fa000000 1000000)
fb: conflicting fb hw usage astdrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:8c:fa:5c:cb:39
igb 0000:06:00.0: eth0: PBA No: 000300-000
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
scsi6 : ahci
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
ast 0000:09:00.0: fb0: astdrmfb frame buffer device
ast 0000:09:00.0: registered panic notifier
megaraid_sas 0000:02:00.0: Controller type: iMR
scsi0 : LSI SAS based MegaRAID driver
[drm] Initialized ast 0.1.0 20120228 for 0000:09:00.0 on minor 0
scsi7 : ahci
igb 0000:07:00.0: irq 81 for MSI/MSI-X
igb 0000:07:00.0: irq 82 for MSI/MSI-X
igb 0000:07:00.0: irq 83 for MSI/MSI-X
igb 0000:07:00.0: irq 84 for MSI/MSI-X
igb 0000:07:00.0: irq 85 for MSI/MSI-X
scsi 0:0:9:0: Direct-Access TOSHIBA MG03SCA100 0108 PQ: 0 ANSI: 5
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
ata5: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432100 irq 80
ata6: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432180 irq 80
ata7: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432200 irq 80
ata8: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432280 irq 80
ata9: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432300 irq 80
ata10: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432380 irq 80
scsi 0:0:10:0: Direct-Access TOSHIBA MG03SCA100 0108 PQ: 0 ANSI: 5
igb 0000:07:00.0: added PHC on eth1
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:8c:fa:5c:cb:38
igb 0000:07:00.0: eth1: PBA No: 000300-000
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
sd 0:0:9:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:9:0: [sda] Write Protect is off
sd 0:0:9:0: [sda] Mode Sense: d3 00 10 08
sd 0:0:9:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GUB0N, LP00, max UDMA/33
ata3.00: configured for UDMA/33
systemd-udevd[329]: renamed network interface eth0 to eno1
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GUB0N LP00 PQ: 0 ANSI: 5
systemd-udevd[331]: renamed network interface eth1 to eno2
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:9:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
hid-generic 0003:1A2C:0021.0004: usb_submit_urb(ctrl) failed: -1
hid-generic 0003:1A2C:0021.0004: timeout initializing reports
input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/input/input5
hid-generic 0003:1A2C:0021.0004: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-7/input1
bio: create slab at 1
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
XFS (dm-1): Mounting Filesystem
XFS (dm-1): Ending clean mount
systemd-journald[169]: Received SIGTERM
type=1404 audit(1429533405.963:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 106409 rules.
SELinux: 2048 avtab hash slots, 106409 rules.
SELinux: 8 users, 86 roles, 4801 types, 280 bools, 1 sens, 1024 cats
SELinux: 83 classes, 106409 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev dm-1, type xfs), uses xattr
type=1403 audit(1429533406.209:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 270.216ms.
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: Relabelled /dev and /run in 25.866ms.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
systemd-journald[623]: Vacuuming done, freed 0 bytes
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
systemd-udevd[662]: starting version 208
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x000000000000042f (\GPE0) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x000000000000052c-0x000000000000052d (\GPIV) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
input: PC Speaker as /devices/platform/pcspkr/input/input6
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: irq 86 for MSI/MSI-X
[Firmware Warn]: ioatdma 0000:00:04.0: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA
ioatdma 0000:00:04.1: irq 87 for MSI/MSI-X
ioatdma 0000:00:04.2: irq 88 for MSI/MSI-X
ioatdma 0000:00:04.3: irq 89 for MSI/MSI-X
ioatdma 0000:00:04.4: irq 90 for MSI/MSI-X
ioatdma 0000:00:04.5: irq 91 for MSI/MSI-X
ioatdma 0000:00:04.6: irq 92 for MSI/MSI-X
ioatdma 0000:00:04.7: irq 93 for MSI/MSI-X
ipmi message handler version 39.2
wmi: Mapper loaded
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:09: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:09: Found new BMC (man_id: 0x004a66, prod_id: 0x01f6, dev_id: 0x20)
ipmi_si 00:09: IPMI kcs interface initialized
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
mei_me 0000:00:16.0: initialization failed.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Adding 8142844k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:8142844k FS
XFS (sda5): Mounting Filesystem
XFS (sda5): Ending clean mount
SELinux: initialized (dev sda5, type xfs), uses xattr
SELinux: initialized (dev sda2, type vfat), uses genfs_contexts
XFS (dm-2): Mounting Filesystem
XFS (dm-2): Ending clean mount
SELinux: initialized (dev dm-2, type xfs), uses xattr
systemd-journald[623]: Received request to flush runtime journal from PID 1
type=1305 audit(1429526214.079:4): audit_pid=859 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
sd 0:0:9:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
igb: eno2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
fuse init (API version 7.22)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
TCP: lp registered
usb 3-2: new high-speed USB device number 4 using xhci_hcd
usb 3-2: New USB device found, idVendor=abcd, idProduct=1234
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: UDisk
usb 3-2: Manufacturer: General
usb 3-2: SerialNumber: Љ
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi11 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
scsi 11:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
sd 11:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
perf samples too long (2930 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5065 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (10093 > 10000), lowering kernel.perf_event_max_sample_rate to 13000