dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
CPU MTRRs all blank - virtualized system.
e820: last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b32000, 0x01b32fff] PGTABLE
BRK [0x01b33000, 0x01b33fff] PGTABLE
BRK [0x01b34000, 0x01b34fff] PGTABLE
init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[mem 0x11fe00000-0x11fffffff] page 2M
BRK [0x01b35000, 0x01b35fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11fdfffff]
[mem 0x100000000-0x11fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdffeffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdffeffff] page 4k
RAMDISK: [mem 0x37986000-0x37cbafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x00000000DFFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x00000000DFFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x00000000DFFF0480 001B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x00000000DFFF0200 000040
ACPI: APIC 0x00000000DFFF0240 000064 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x00000000DFFF02B0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11fff8000-0x11fffbfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdffeffff]
node 0: [mem 0x100000000-0x11fffffff]
Initmem setup node 0 [mem 0x00001000-0x11fffffff]
On node 0 totalpages: 1048462
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14272 pages used for memmap
DMA32 zone: 913392 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 3 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xe0000000-0xfffbffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:3 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88011fc00000 s86336 r8192 d32448 u524288
pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032057
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4046752K/4193848K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 147096K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=3
NR_IRQS:8448 nr_irqs:448 16
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using PMTIMER reference calibration
tsc: Detected 3259.358 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6521.32 BogoMIPS (lpj=10864526)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
ftrace: allocating 21171 entries in 83 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
APIC calibration not consistent with PM-Timer: 110ms instead of 100ms
APIC delta adjusted to PM-Timer: 6251334 (6933359)
Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booting SMP configuration:
.... node #0, CPUs: #1
mce: CPU supports 0 MCE banks
TSC synchronization [CPU#0 -> CPU#1]:
Measured 4977 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#2
mce: CPU supports 0 MCE banks
x86: Booted up 1 node, 3 CPUs
smpboot: Total of 3 processors activated (19563.98 BogoMIPS)
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
RTC time: 0:00:39, date: 04/19/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20141107/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 1 GPEs in block 00 to 07
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 3 devices
Switched to clocksource acpi_pm
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3284K (ffff880037986000 - ffff880037cbb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbff0000-0xdfff0000] (64MB) mapped at [ffff8800dbff0000-ffff8800dffeffff]
platform rtc_cmos: registered platform RTC device (no PNP device found)
RAPL PMU detected, hw unit 2^-0 Joules, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x0
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000780000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 42
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 11:372:1
rtc_cmos rtc_cmos: setting system clock to 2015-04-19 00:00:39 UTC (1429401639)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
random: systemd-tmpfile urandom read with 1 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
ahci 0000:00:0d.0: version 3.0
ohci-pci: OHCI PCI platform driver
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host2: ahci
ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 62914560 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
usb 1-1: new full-speed USB device number 2 using ohci-pci
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input2
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
floppy0: no floppy controllers found
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
EXT4-fs (sda2): re-mounted. Opts: data=ordered
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input3
vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 4.3.26_OSE (interface 0x00010004)
vboxsf: Successfully loaded version 4.3.26_OSE (interface 0x00010004)
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
systemd-journald[136]: Received request to flush runtime journal from PID 1
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
ACPI: Sleep Button [SLPF]
mousedev: PS/2 mouse device common for all mice
parport_pc 00:02: reported by Plug and Play ACPI
input: PC Speaker as /devices/platform/pcspkr/input/input6
intel_rapl: no valid rapl domains found in package 0
intel_rapl: no valid rapl domains found in package 0
ppdev: user-space parallel port driver
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input7
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:16:4b:fb
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
e1000 0000:00:03.0 enp0s3: renamed from eth0
snd_intel8x0 0000:00:05.0: intel8x0_measure_ac97_clock: measured 51891 usecs (7199 samples)
snd_intel8x0 0000:00:05.0: measured clock 138733 rejected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
snd_intel8x0 0000:00:05.0: intel8x0_measure_ac97_clock: measured 53994 usecs (7680 samples)
snd_intel8x0 0000:00:05.0: measured clock 142238 rejected
cfg80211: Calling CRDA to update world regulatory domain
snd_intel8x0 0000:00:05.0: intel8x0_measure_ac97_clock: measured 53175 usecs (7200 samples)
snd_intel8x0 0000:00:05.0: measured clock 135401 rejected
snd_intel8x0 0000:00:05.0: clocking to 48000
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
floppy0: no floppy controllers found
fuse init (API version 7.23)
Chrome_ChildThr[1136]: segfault at 0 ip 00007f0eeba07005 sp 00007f0ed7119520 error 6 in libmozalloc.so[7f0eeba06000+2000]