dmesg - IO1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffaffff] ACPI data
BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-GS FX, BIOS P1.40 10/31/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000012f000000 aka 4848M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x12ee00000-0x12effffff]
[mem 0x12ee00000-0x12effffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12edfffff]
[mem 0x12c000000-0x12edfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
[mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff9ffff] page 4k
RAMDISK: [mem 0x34904000-0x36479fff]
ACPI: RSDP 00000000000fbf20 000014 (v00 ACPIAM)
ACPI: RSDT 00000000cffa0000 00003C (v01 103112 RSDT1514 20121031 MSFT 00000097)
ACPI: FACP 00000000cffa0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 00000000cffa0470 004D0C (v01 AS626 AS626131 00000131 INTL 20051117)
ACPI: FACS 00000000cffb0000 000040
ACPI: APIC 00000000cffa0390 0000A0 (v01 103112 APIC1514 20121031 MSFT 00000097)
ACPI: MCFG 00000000cffa0430 00003C (v01 103112 OEMMCFG 20121031 MSFT 00000097)
ACPI: OEMB 00000000cffb0040 000072 (v01 103112 OEMB1514 20121031 MSFT 00000097)
ACPI: AAFT 00000000cffaa470 00002E (v01 103112 OEMAAFT 20121031 MSFT 00000097)
ACPI: SSDT 00000000cffaa4a0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012effffff]
Initmem setup node 0 [mem 0x00000000-0x12effffff]
NODE_DATA [mem 0x12eff9000-0x12effdfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a600000-ffff88012e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcff9ffff]
node 0: [mem 0x100000000-0x12effffff]
On node 0 totalpages: 1044286
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13247 pages used for memmap
DMA32 zone: 847776 pages, LIFO batch:31
Normal zone: 3008 pages used for memmap
Normal zone: 192512 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 20, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcffa0000-0xcffaffff]
PM: Registered nosave memory: [mem 0xcffb0000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88012ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027946
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3934344K/4177144K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 242800K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 3817.152 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7634.30 BogoMIPS (lpj=15268608)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-4300 Quad-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (30537.21 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcffb0000-0xcffdffff] (196608 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:42:31, date: 04/17/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xefeff000-0xefefffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xefefec00-0xefefecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 0x10: [mem 0xefef8000-0xefefbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 0x10: [mem 0xefefd000-0xefefdfff]
pci 0000:00:07.0: reg 0x14: [io 0xd080-0xd087]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io 0xd000-0xd007]
pci 0000:00:08.0: reg 0x14: [io 0xcc00-0xcc03]
pci 0000:00:08.0: reg 0x18: [io 0xc880-0xc887]
pci 0000:00:08.0: reg 0x1c: [io 0xc800-0xc803]
pci 0000:00:08.0: reg 0x20: [io 0xc480-0xc48f]
pci 0000:00:08.0: reg 0x24: [mem 0xefefc000-0xefefcfff]
pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.1: reg 0x10: [io 0xc400-0xc407]
pci 0000:00:08.1: reg 0x14: [io 0xc080-0xc083]
pci 0000:00:08.1: reg 0x18: [io 0xc000-0xc007]
pci 0000:00:08.1: reg 0x1c: [io 0xbc00-0xbc03]
pci 0000:00:08.1: reg 0x20: [io 0xb880-0xb88f]
pci 0000:00:08.1: reg 0x24: [mem 0xefef7000-0xefef7fff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [1002:68d8] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xeffe0000-0xefffffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xeffc0000-0xeffdffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa60] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xeffbc000-0xeffbffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xeff00000-0xefffffff]
pci 0000:00:09.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [dma 3]
pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0500-0x057f] could not be reserved
system 00:04: [io 0x0580-0x05ff] has been reserved
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0880-0x08ff] has been reserved
system 00:04: [io 0x0d00-0x0d7f] has been reserved
system 00:04: [io 0x0d80-0x0dff] has been reserved
system 00:04: [io 0x1100-0x117f] has been reserved
system 00:04: [io 0x1180-0x11ff] has been reserved
system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
system 00:04: [mem 0xfec80000-0xfecfffff] has been reserved
system 00:04: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:04: [mem 0xffb80000-0xffffffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: [io 0x0280-0x028f] has been reserved
system 00:09: [io 0x0290-0x029f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xeff00000-0xefffffff]
pci 0000:00:09.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff]
pci_bus 0000:01: resource 9 [mem 0xf8000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xeff00000-0xefffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28120K (ffff880034904000 - ffff88003647a000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x00000000
microcode: CPU1: patch_level=0x00000000
microcode: CPU2: patch_level=0x00000000
microcode: CPU3: patch_level=0x00000000
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1429285351.607:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7868
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90008780000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xefefec00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 23, io mem 0xefeff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 11:539:740
rtc_cmos 00:05: setting system clock to 2015-04-17 15:42:32 UTC (1429285352)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[124]: starting version 204
pata_amd 0000:00:06.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 21
ata4: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 21
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 20
ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 20
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x1043:0x0356).
[drm] register mmio base: 0xEFFE0000
[drm] register mmio size: 131072
ATOM BIOS: 68D8.12.17.0.4.AS06.U122
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 2015666 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading REDWOOD Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880122c71c00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880122c71c0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90008e1c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 43 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr bc:5f:f4:c2:99:ce
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
ata2: port disabled--ignoring
usb 1-3: new high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 1-3: New USB device found, idVendor=148f, idProduct=5370
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: 802.11 n WLAN
usb 1-3: Manufacturer: Ralink
usb 1-3: SerialNumber: 1.0
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN00, max UDMA/133
ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
[drm] fb mappable at 0xD045E000
[drm] vram apper at 0xD0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:02:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
tsc: Refined TSC clocksource calibration: 3817.355 MHz
usb 2-4: new low-speed USB device number 2 using ohci-pci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 2-4: New USB device found, idVendor=046d, idProduct=c31c
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Keyboard
usb 2-4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input5
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:02.0-4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input6
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:02.0-4/input1
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
Switched to clocksource tsc
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[384]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
i2c i2c-8: nForce2 SMBus adapter at 0x600
ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
fam15h_power 0000:00:18.4: Bogus value for ProcessorPwrWatts (processor_pwr_watts>=21631)
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
hda_intel: Disabling MSI
hda-intel 0000:00:05.0: Disabling 64bit DMA
hda-intel 0000:00:05.0: Enable delay in RIRB handling
lp0: using parport0 (interrupt-driven).
device-mapper: multipath: version 1.6.0 loaded
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
cfg80211: Calling CRDA to update world regulatory domain
usb 1-3: reset high-speed USB device number 2 using ehci-pci
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x1a
Front Mic=0x1e
Line=0x1b
CD=0x1f
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:02:00.1: Using LPIB position fix
snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
hda-intel 0000:02:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input10
init: failsafe main process (740) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (819) killed by HUP signal
init: cups main process ended, respawning
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
forcedeth 0000:00:07.0 eth0: MSI enabled
forcedeth 0000:00:07.0 eth0: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (903) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1450) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with 28:5f:db:01:07:ef
wlan0: send auth to 28:5f:db:01:07:ef (try 1/3)
wlan0: authenticated
wlan0: associate with 28:5f:db:01:07:ef (try 1/3)
wlan0: RX AssocResp from 28:5f:db:01:07:ef (capab=0x411 status=0 aid=6)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 9 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 11 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 12 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 13 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 14 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 0 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 1 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 2 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 3 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 4 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 5 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 6 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 8 in queue 2
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping