dmesg - 001

Return To 001 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-46-generic (buildd@orlo) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #79-Ubuntu SMP Tue Mar 10 20:06:50 UTC 2015 (Ubuntu 3.13.0-46.79-generic 3.13.11-ckt15)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000de821fff] usable
BIOS-e820: [mem 0x00000000de822000-0x00000000dea1ffff] reserved
BIOS-e820: [mem 0x00000000dea20000-0x00000000dea20fff] ACPI data
BIOS-e820: [mem 0x00000000dea21000-0x00000000deb3efff] ACPI NVS
BIOS-e820: [mem 0x00000000deb3f000-0x00000000dee8bfff] reserved
BIOS-e820: [mem 0x00000000dee8c000-0x00000000def40fff] type 20
BIOS-e820: [mem 0x00000000def41000-0x00000000def41fff] usable
BIOS-e820: [mem 0x00000000def42000-0x00000000def84fff] ACPI NVS
BIOS-e820: [mem 0x00000000def85000-0x00000000df5fafff] usable
BIOS-e820: [mem 0x00000000df5fb000-0x00000000df7f1fff] reserved
BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xdeb2f000  ACPI 2.0=0xdeb2f000  SMBIOS=0xf04c0  MPS=0xfd460 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002503000) (21MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000002503000-0x0000000035b48000) (822MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000035b48000-0x0000000036d9c000) (18MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000036d9c000-0x000000009b040000) (1602MB)
efi: mem10: type=2, attr=0xf, range=[0x000000009b040000-0x00000000cfc1f000) (843MB)
efi: mem11: type=7, attr=0xf, range=[0x00000000cfc1f000-0x00000000cfc25000) (0MB)
efi: mem12: type=2, attr=0xf, range=[0x00000000cfc25000-0x00000000cfdfb000) (1MB)
efi: mem13: type=1, attr=0xf, range=[0x00000000cfdfb000-0x00000000cff2f000) (1MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000cff2f000-0x00000000d2c89000) (45MB)
efi: mem15: type=4, attr=0xf, range=[0x00000000d2c89000-0x00000000d2f21000) (2MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000d2f21000-0x00000000d2fcb000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000d2fcb000-0x00000000d300b000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000d300b000-0x00000000d3039000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000d3039000-0x00000000d3044000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000d3044000-0x00000000d304b000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000d304b000-0x00000000d305b000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000d305b000-0x00000000d3060000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000d3060000-0x00000000dcd40000) (156MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000dcd40000-0x00000000dcd42000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000dcd42000-0x00000000ddf46000) (18MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000ddf46000-0x00000000de65b000) (7MB)
efi: mem27: type=2, attr=0xf, range=[0x00000000de65b000-0x00000000de665000) (0MB)
efi: mem28: type=3, attr=0xf, range=[0x00000000de665000-0x00000000de822000) (1MB)
efi: mem29: type=0, attr=0xf, range=[0x00000000de822000-0x00000000de888000) (0MB)
efi: mem30: type=0, attr=0xf, range=[0x00000000de888000-0x00000000dea20000) (1MB)
efi: mem31: type=9, attr=0xf, range=[0x00000000dea20000-0x00000000dea21000) (0MB)
efi: mem32: type=10, attr=0xf, range=[0x00000000dea21000-0x00000000dea9d000) (0MB)
efi: mem33: type=10, attr=0xf, range=[0x00000000dea9d000-0x00000000deb3f000) (0MB)
efi: mem34: type=6, attr=0x800000000000000f, range=[0x00000000deb3f000-0x00000000dedde000) (2MB)
efi: mem35: type=6, attr=0x800000000000000f, range=[0x00000000dedde000-0x00000000dee0e000) (0MB)
efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000dee0e000-0x00000000dee10000) (0MB)
efi: mem37: type=6, attr=0x800000000000000f, range=[0x00000000dee10000-0x00000000dee8c000) (0MB)
efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000dee8c000-0x00000000deeb0000) (0MB)
efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000deeb0000-0x00000000def41000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000def41000-0x00000000def42000) (0MB)
efi: mem41: type=10, attr=0xf, range=[0x00000000def42000-0x00000000def85000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000def85000-0x00000000df0d1000) (1MB)
efi: mem43: type=3, attr=0xf, range=[0x00000000df0d1000-0x00000000df5d2000) (5MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000df5d2000-0x00000000df5e2000) (0MB)
efi: mem45: type=3, attr=0xf, range=[0x00000000df5e2000-0x00000000df5f4000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000df5f4000-0x00000000df5fb000) (0MB)
efi: mem47: type=6, attr=0x800000000000000f, range=[0x00000000df5fb000-0x00000000df7f2000) (1MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000df7f2000-0x00000000df800000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x0000000100000000-0x000000041e000000) (12768MB)
efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI:    / , BIOS 4.6.5 09/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask C00000000 write-back
  1 base 400000000 mask FF0000000 write-back
  2 base 410000000 mask FF8000000 write-back
  3 base 418000000 mask FFC000000 write-back
  4 base 41C000000 mask FFE000000 write-back
  5 base 0E0000000 mask FE0000000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 16352M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16864MB, range: 32MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x41de00000-0x41dffffff]
 [mem 0x41de00000-0x41dffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41ddfffff]
 [mem 0x41c000000-0x41ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
 [mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xde821fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xde7fffff] page 2M
 [mem 0xde800000-0xde821fff] page 4k
init_memory_mapping: [mem 0xdef41000-0xdef41fff]
 [mem 0xdef41000-0xdef41fff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0xdef85000-0xdf5fafff]
 [mem 0xdef85000-0xdeffffff] page 4k
 [mem 0xdf000000-0xdf3fffff] page 2M
 [mem 0xdf400000-0xdf5fafff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xdf7f2000-0xdf7fffff]
 [mem 0xdf7f2000-0xdf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x35b48000-0x36d9bfff]
ACPI: RSDP 00000000deb2f000 000024 (v02 ALASKA)
ACPI: XSDT 00000000deb2f078 000074 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000deb39c10 0000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 00000000deb2f188 00AA82 (v02 ALASKA    A M I 00000A07 INTL 20051117)
ACPI: FACS 00000000deb3df80 000040
ACPI: APIC 00000000deb39d08 0000A6 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 00000000deb39db0 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 00000000deb39df8 00003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000deb39e38 000038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000deb39e70 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000deb3a188 0009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000deb3ab38 000A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: DMAR 00000000deb3b5d0 000080 (v01 INTEL      SNB  00000001 INTL 00000001)
ACPI: ASF! 00000000deb3b650 0000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
Initmem setup node 0 [mem 0x00000000-0x41dffffff]
  NODE_DATA [mem 0x41dfea000-0x41dfeefff]
 [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040d600000-ffff88041d5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x41dffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xde821fff]
  node   0: [mem 0xdef41000-0xdef41fff]
  node   0: [mem 0xdef85000-0xdf5fafff]
  node   0: [mem 0xdf7f2000-0xdf7fffff]
  node   0: [mem 0x100000000-0x41dffffff]
On node 0 totalpages: 4181573
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 14203 pages used for memmap
  DMA32 zone: 908967 pages, LIFO batch:31
  Normal zone: 51072 pages used for memmap
  Normal zone: 3268608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xde822000-0xdea1ffff]
PM: Registered nosave memory: [mem 0xdea20000-0xdea20fff]
PM: Registered nosave memory: [mem 0xdea21000-0xdeb3efff]
PM: Registered nosave memory: [mem 0xdeb3f000-0xdee8bfff]
PM: Registered nosave memory: [mem 0xdee8c000-0xdef40fff]
PM: Registered nosave memory: [mem 0xdef42000-0xdef84fff]
PM: Registered nosave memory: [mem 0xdf5fb000-0xdf7f1fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041dc00000 s82368 r8192 d24128 u262144
pcpu-alloc: s82368 r8192 d24128 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4116208
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16171136K/16726292K available (7384K kernel code, 1145K rwdata, 3408K rodata, 1336K init, 1444K bss, 555156K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3093.012 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.02 BogoMIPS (lpj=12372048)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28563 entries in 112 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000de9b7000 end: 0x000000de9c3fff
IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3920XM CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (49488.19 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdea21000-0xdeb3efff] (1171456 bytes)
PM: Registering ACPI NVS region [mem 0xdef42000-0xdef84fff] (274432 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:56:58, date: 03/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000de9cd018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000de9cea98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000de9cfc18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7720000-0xf772ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf773c000-0xf773c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7700000-0xf771ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7739000-0xf7739fff]
pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7738000-0xf77383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7730000-0xf7733fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7737000-0xf77373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7736000-0xf77367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7735000-0xf77350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf7600000-0xf761ffff]
pci 0000:02:00.0: reg 0x18: [io  0xd000-0xd01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xf7620000-0xf7623fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7500000-0xf751ffff]
pci 0000:03:00.0: reg 0x18: [io  0xc000-0xc01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xf7520000-0xf7523fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:04:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf7400000-0xf741ffff]
pci 0000:04:00.0: reg 0x18: [io  0xb000-0xb01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xf7420000-0xf7423fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf7300000-0xf731ffff]
pci 0000:05:00.0: reg 0x18: [io  0xa000-0xa01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xf7320000-0xf7323fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
pci 0000:06:00.0: reg 0x18: [io  0x9000-0x901f]
pci 0000:06:00.0: reg 0x1c: [mem 0xf7220000-0xf7223fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:07:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 9 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xde822000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdef42000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf5fb000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0x1000-0x100f] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0x0400-0x0453] could not be reserved
system 00:04: [io  0x0458-0x047f] has been reserved
system 00:04: [io  0x0500-0x057f] has been reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io  0x0295-0x0296] has been reserved
system 00:07: [io  0x0a00-0x0a01] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs FIT0002 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [io  0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf7600000-0xf76fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xf7500000-0xf75fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.2:   bridge window [mem 0xf7400000-0xf74fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7600000-0xf76fffff]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18768K (ffff880035b48000 - ffff880036d9c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcec89000-0xd2c89000] (64MB) mapped at [ffff8800cec89000-ffff8800d2c88fff]
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1426895818.560:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31993
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, mapped to 0xffffc90005b80000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (48 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7738000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-46-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7737000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-46-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-46-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-46-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c7613364bc2aa19d70bf0c6e59bf8acaff65c879'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 7:815:959
memory memory10: hash matches
rtc_cmos 00:05: setting system clock to 2015-03-20 23:56:58 UTC (1426895818)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
systemd-udevd[142]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:30:18:c4:17:c0
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
usb 1-1: new high-speed USB device number 2 using ehci-pci
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7736000 port 0xf7736100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf7736000 port 0xf7736180 irq 44
ata3: SATA max UDMA/133 abar m2048@0xf7736000 port 0xf7736200 irq 44
ata4: SATA max UDMA/133 abar m2048@0xf7736000 port 0xf7736280 irq 44
ata5: SATA max UDMA/133 abar m2048@0xf7736000 port 0xf7736300 irq 44
ata6: SATA max UDMA/133 abar m2048@0xf7736000 port 0xf7736380 irq 44
e1000e 0000:02:00.0 eth1: registered PHC clock
e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:30:18:a7:9f:e6
e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:03:00.0: irq 48 for MSI/MSI-X
e1000e 0000:03:00.0: irq 49 for MSI/MSI-X
e1000e 0000:03:00.0: irq 50 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
e1000e 0000:03:00.0 eth2: registered PHC clock
e1000e 0000:03:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:30:18:a7:9f:e7
e1000e 0000:03:00.0 eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0 eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:04:00.0: irq 51 for MSI/MSI-X
e1000e 0000:04:00.0: irq 52 for MSI/MSI-X
e1000e 0000:04:00.0: irq 53 for MSI/MSI-X
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:04:00.0 eth3: registered PHC clock
e1000e 0000:04:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:30:18:a7:9f:e8
e1000e 0000:04:00.0 eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.0 eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:05:00.0: irq 54 for MSI/MSI-X
e1000e 0000:05:00.0: irq 55 for MSI/MSI-X
e1000e 0000:05:00.0: irq 56 for MSI/MSI-X
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880407550848), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8804075508c0), AE_NOT_FOUND (20131115/psparse-536)
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: ATAPI: MATSHITABD-MLT UJ265, 1.00, max UDMA/133
ata3.00: configured for UDMA/133
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Crucial_CT512M550SSD1, MU01, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Crucial_CT256M550SSD3, MU01, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880407550848), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff8804075508c0), AE_NOT_FOUND (20131115/psparse-536)
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata2.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT512M55 MU01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      Crucial_CT256M55 MU01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: CD-ROM            MATSHITA BD-MLT UJ265     1.00 PQ: 0 ANSI: 5
 sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
e1000e 0000:05:00.0 eth4: registered PHC clock
e1000e 0000:05:00.0 eth4: (PCI Express:2.5GT/s:Width x1) 00:30:18:a7:9f:e9
e1000e 0000:05:00.0 eth4: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0 eth4: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:06:00.0: irq 57 for MSI/MSI-X
e1000e 0000:06:00.0: irq 58 for MSI/MSI-X
e1000e 0000:06:00.0: irq 59 for MSI/MSI-X
e1000e 0000:06:00.0 eth5: registered PHC clock
e1000e 0000:06:00.0 eth5: (PCI Express:2.5GT/s:Width x1) 00:30:18:c4:17:c1
e1000e 0000:06:00.0 eth5: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0 eth5: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=05ac, idProduct=1003
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Hub in Apple Extended USB Keyboard
usb 3-1: Manufacturer: Mitsumi Electric
usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
random: init urandom read with 55 bits of entropy available
init: plymouth-upstart-bridge main process (222) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (232) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (235) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (239) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
tsc: Refined TSC clocksource calibration: 3092.975 MHz
usb 2-1.6: new full-speed USB device number 3 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready
systemd-udevd[354]: starting version 204
usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e8
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: BCM20702A0
usb 2-1.6: Manufacturer: Broadcom Corp
usb 2-1.6: SerialNumber: 5CF3706689C9
lp: driver loaded but no devices found
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or  required key missing - tainting kernel
mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
fintek_cir: first portsel read was bunk, trying alt
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  346.47  Thu Feb 19 18:56:03 PST 2015
Registered IR keymap rc-rc6-mce
input: Fintek LPC SuperIO Consumer IR Transceiver as /devices/pnp0/00:08/rc/rc0/input5
rc0: Fintek LPC SuperIO Consumer IR Transceiver as /devices/pnp0/00:08/rc/rc0
IR RC5(x) protocol handler initialized
IR NEC protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
fintek_cir: driver has been successfully loaded
IR SANYO protocol handler initialized
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
input: MCE IR Keyboard/Mouse (fintek-cir) as /devices/virtual/input/input6
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 249 
rc rc0: lirc_dev: driver ir-lirc-codec (fintek-cir) registered at minor = 0
IR LIRC bridge handler initialized
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:07:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:07:00.0: irq 62 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4004c601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000004
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=2 (0x14/0x1b/0x0/0x0/0x0) type:hp
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
usb 2-1.6: Direct firmware load failed with error -2
usb 2-1.6: Falling back to user helper
iwlwifi 0000:07:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
type=1400 audit(1426895819.591:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=491 comm="apparmor_parser"
type=1400 audit(1426895819.591:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=491 comm="apparmor_parser"
type=1400 audit(1426895819.591:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=491 comm="apparmor_parser"
type=1400 audit(1426895819.591:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=491 comm="apparmor_parser"
type=1400 audit(1426895819.591:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=491 comm="apparmor_parser"
type=1400 audit(1426895819.591:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=491 comm="apparmor_parser"
type=1400 audit(1426895819.591:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
type=1400 audit(1426895819.591:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
type=1400 audit(1426895819.591:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
usb 3-1.2: new low-speed USB device number 3 using xhci_hcd
iwlwifi 0000:07:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
iwlwifi 0000:07:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:07:00.0: L1 Disabled - LTR Disabled
usb 3-1.2: New USB device found, idVendor=046d, idProduct=c00e
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: USB-PS/2 Optical Mouse
usb 3-1.2: Manufacturer: Logitech
usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
EXT4-fs (sdb4): re-mounted. Opts: errors=remount-ro,discard
Bluetooth: can't load firmware, may not work correctly
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
random: nonblocking pool is initialized
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard
usb 3-1.3: new full-speed USB device number 4 using xhci_hcd
usb 3-1.3: New USB device found, idVendor=05ac, idProduct=020b
usb 3-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.3: Product: Apple Extended USB Keyboard
usb 3-1.3: Manufacturer: Mitsumi Electric
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
FS-Cache: Loaded
hidraw: raw HID events driver (C) Jiri Kosina
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
intel_rapl: domain uncore energy ctr 0:0 not working, skip
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
FS-Cache: Netfs 'nfs' registered for caching
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input9
hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2/input0
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input10
hid-generic 0003:05AC:020B.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-1.3/input0
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/input/input11
hid-generic 0003:05AC:020B.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-1.3/input1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
init: idmapd-mounting (/import/video) main process (687) killed by TERM signal
init: idmapd-mounting (/import/vario) main process (688) killed by TERM signal
init: idmapd-mounting (/import/raid) main process (690) killed by TERM signal
init: idmapd-mounting (/import/multi) main process (691) killed by TERM signal
init: idmapd-mounting (/import/data) main process (692) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x4/0x5
   inputs:
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bonding: bond0: Setting MII monitoring interval to 100.
init: cups main process (858) killed by HUP signal
init: cups main process ended, respawning
input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
bonding: bond0: setting mode to balance-rr (0).
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready
bonding: bond0: Adding slave eth3.
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
bonding: bond0: enslaving eth3 as an active interface with a down link.
bonding: bond0: Adding slave eth4.
IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
bonding: bond0: enslaving eth4 as an active interface with a down link.
init: failsafe main process (946) killed by TERM signal
Switched to clocksource tsc
iwlwifi 0000:07:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:07:00.0: L1 Disabled - LTR Disabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
nvidia 0000:01:00.0: irq 63 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
bonding: bond0: link status definitely up for interface eth3, 1000 Mbps full duplex.
bonding: bond0: first active interface up!
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
init: plymouth-splash main process (2428) terminated with status 1
e1000e: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
bonding: bond0: link status definitely up for interface eth4, 1000 Mbps full duplex.
init: plymouth-stop pre-start process (2519) terminated with status 1
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: authenticate with b4:0e:dc:3a:b2:90
wlan0: send auth to b4:0e:dc:3a:b2:90 (try 1/3)
wlan0: authenticated
wlan0: associate with b4:0e:dc:3a:b2:90 (try 1/3)
wlan0: RX AssocResp from b4:0e:dc:3a:b2:90 (capab=0x511 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by b4:0e:dc:3a:b2:90
e1000e: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
audit_printk_skb: 198 callbacks suppressed
type=1400 audit(1426895849.923:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3544 comm="apparmor_parser"
type=1400 audit(1426895849.923:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3544 comm="apparmor_parser"
type=1400 audit(1426895849.923:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3544 comm="apparmor_parser"
UDF-fs: INFO Mounting volume 'ETQWDVD', timestamp 2007/08/25 20:21 (1f10)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
RPC: AUTH_GSS upcall failed. Please check user daemon is running.
init: D-Bus blocked objects not being serialised yet
init: upstart-udev-bridge main process (350) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (916) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (1095) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: plymouth-ready (started) main process (2431) terminated with status 1
wlan0: deauthenticated from b4:0e:dc:3a:b2:90 (Reason: 6)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with b4:0e:dc:3a:b2:90
wlan0: send auth to b4:0e:dc:3a:b2:90 (try 1/3)
wlan0: authenticated
wlan0: associate with b4:0e:dc:3a:b2:90 (try 1/3)
wlan0: RX AssocResp from b4:0e:dc:3a:b2:90 (capab=0x511 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by b4:0e:dc:3a:b2:90
type=1400 audit(1426953479.577:80): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=20682 comm="apparmor_parser"
type=1400 audit(1426956749.906:81): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=24874 comm="apparmor_parser"
type=1400 audit(1426956749.918:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=24874 comm="apparmor_parser"
type=1400 audit(1426956749.918:83): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=24874 comm="apparmor_parser"
type=1400 audit(1426956749.930:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=24874 comm="apparmor_parser"
type=1400 audit(1426956749.930:85): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=24874 comm="apparmor_parser"
type=1400 audit(1426956749.946:86): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=24874 comm="apparmor_parser"
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
systemd-hostnamed[24943]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
init: upstart-udev-bridge main process (8101) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (8111) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (8114) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (29329) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (29362) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (29361) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (29368) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-udev-bridge main process (29380) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (29406) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (29405) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
usb 3-1.2: USB disconnect, device number 3
usb 3-1.1: new low-speed USB device number 5 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=045e, idProduct=0040
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae
usb 3-1.1: Manufacturer: Microsoft
usb 3-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input14
hid-generic 0003:045E:0040.0004: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical\xffffffc2\xffffffae\xffffffae] on usb-0000:00:14.0-1.1/input0

Return To 001 System Information