dmesg - 20150306
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.0-040000rc2-generic (kernel@gloin) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201503031836 SMP Tue Mar 3 18:37:51 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable
BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x023cde30-0x023cde40] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009cbff] usable
reserve setup_data: [mem 0x000000000009cc00-0x000000000009ffff] reserved
reserve setup_data: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000023cde2f] usable
reserve setup_data: [mem 0x00000000023cde30-0x00000000023cde40] usable
reserve setup_data: [mem 0x00000000023cde41-0x00000000bf77ffff] usable
reserve setup_data: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
reserve setup_data: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
reserve setup_data: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000033fffffff] usable
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P6T DELUXE V2, BIOS 1003 03/08/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 4GB, type WB
reg 2, base: 12GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 12280M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 4GB, type WB
reg 5, base: 12GB, range: 1GB, type WB
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fcd000, 0x01fcdfff] PGTABLE
BRK [0x01fce000, 0x01fcefff] PGTABLE
BRK [0x01fcf000, 0x01fcffff] PGTABLE
init_memory_mapping: [mem 0x33fe00000-0x33fffffff]
[mem 0x33fe00000-0x33fffffff] page 2M
BRK [0x01fd0000, 0x01fd0fff] PGTABLE
init_memory_mapping: [mem 0x320000000-0x33fdfffff]
[mem 0x320000000-0x33fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x31fffffff]
[mem 0x100000000-0x31fffffff] page 2M
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
RAMDISK: [mem 0x343ba000-0x361d4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB1A0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BF780100 000064 (v01 030810 XSDT1145 20100308 MSFT 00000097)
ACPI: FACP 0x00000000BF780290 0000F4 (v03 030810 FACP1145 20100308 MSFT 00000097)
ACPI: DSDT 0x00000000BF7804B0 00B66D (v01 A1265 A1265001 00000001 INTL 20060113)
ACPI: FACS 0x00000000BF798000 000040
ACPI: APIC 0x00000000BF780390 0000D8 (v01 030810 APIC1145 20100308 MSFT 00000097)
ACPI: MCFG 0x00000000BF780470 00003C (v01 030810 OEMMCFG 20100308 MSFT 00000097)
ACPI: OEMB 0x00000000BF798040 000072 (v01 030810 OEMB1145 20100308 MSFT 00000097)
ACPI: HPET 0x00000000BF78F4B0 000038 (v01 030810 OEMHPET 20100308 MSFT 00000097)
ACPI: DMAR 0x00000000BF7980C0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 030810 OEMOSFR 20100308 MSFT 00000097)
ACPI: SSDT 0x00000000BF79A470 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
NODE_DATA(0) allocated [mem 0x33fff2000-0x33fff6fff]
[ffffea0000000000-ffffea000cffffff] PMD -> [ffff880333600000-ffff88033f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000bf77ffff]
node 0: [mem 0x0000000100000000-0x000000033fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
On node 0 totalpages: 3143451
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12190 pages used for memmap
DMA32 zone: 780160 pages, LIFO batch:31
Normal zone: 36864 pages used for memmap
Normal zone: 2359296 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
PM: Registered nosave memory: [mem 0x023cd000-0x023cdfff]
PM: Registered nosave memory: [mem 0x023cd000-0x023cdfff]
PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88033fc00000 s91032 r8192 d31848 u131072
pcpu-alloc: s91032 r8192 d31848 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3094312
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12261668K/12573804K available (8131K kernel code, 1136K rwdata, 3912K rodata, 1420K init, 1292K bss, 312136K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:960 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2672.733 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.46 BogoMIPS (lpj=10690932)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150204
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81e81000 - ffffffff81e88000)
ftrace: allocating 33101 entries in 130 pages
This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (42763.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:42:48, date: 03/06/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8803313D8000 001C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880331089800 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0cf8-0x0cff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x8800-0x881f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x8880-0x889f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x8c00-0x8c1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x8080-0x809f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x8400-0x841f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x8480-0x849f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7c00-0x7c07]
pci 0000:00:1f.2: reg 0x14: [io 0x7880-0x7883]
pci 0000:00:1f.2: reg 0x18: [io 0x7800-0x7807]
pci 0000:00:1f.2: reg 0x1c: [io 0x7480-0x7483]
pci 0000:00:1f.2: reg 0x20: [io 0x7400-0x741f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7ffc000-0xf7ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7ffd000-0xf7ffd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:0614] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:02:00.0: reg 0x24: [io 0x9c00-0x9c7f]
pci 0000:02:00.0: reg 0x30: [mem 0xfb5e0000-0xfb5fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb5fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfb8f8000-0xfb8fffff 64bit]
pci 0000:03:00.0: reg 0x18: [mem 0xfb600000-0xfb7fffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xfb600000-0xfb8fffff]
pci 0000:04:00.0: [12d8:2304] type 01 class 0x060400
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 04-07]
pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
pci 0000:00:09.0: bridge window [mem 0xfb900000-0xfbafffff]
pci 0000:05:01.0: [12d8:2304] type 01 class 0x060400
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:02.0: [12d8:2304] type 01 class 0x060400
pci 0000:05:02.0: supports D1 D2
pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05-07]
pci 0000:04:00.0: bridge window [io 0xa000-0xafff]
pci 0000:04:00.0: bridge window [mem 0xfb900000-0xfbafffff]
pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xac00-0xac07]
pci 0000:06:00.0: reg 0x14: [io 0xa880-0xa883]
pci 0000:06:00.0: reg 0x18: [io 0xa800-0xa807]
pci 0000:06:00.0: reg 0x1c: [io 0xa480-0xa483]
pci 0000:06:00.0: reg 0x20: [io 0xa400-0xa41f]
pci 0000:06:00.0: reg 0x24: [mem 0xfb9ffc00-0xfb9ffdff]
pci 0000:06:00.0: reg 0x30: [mem 0xfb9e0000-0xfb9effff pref]
pci 0000:05:01.0: PCI bridge to [bus 06]
pci 0000:05:01.0: bridge window [io 0xa000-0xafff]
pci 0000:05:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:07:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfbaf8000-0xfbafffff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:02.0: PCI bridge to [bus 07]
pci 0000:05:02.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:0a:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:0a:00.0: reg 0x18: [io 0xd800-0xd8ff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 0a]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:09:00.0: [11ab:6121] type 00 class 0x01018f
pci 0000:09:00.0: reg 0x10: [io 0xcc00-0xcc07]
pci 0000:09:00.0: reg 0x14: [io 0xc880-0xc883]
pci 0000:09:00.0: reg 0x18: [io 0xc800-0xc807]
pci 0000:09:00.0: reg 0x1c: [io 0xc480-0xc483]
pci 0000:09:00.0: reg 0x20: [io 0xc400-0xc40f]
pci 0000:09:00.0: reg 0x24: [mem 0xfbcffc00-0xfbcfffff]
pci 0000:09:00.0: supports D1
pci 0000:09:00.0: PME# supported from D0 D1 D3hot
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:08:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:08:00.0: reg 0x18: [io 0xb800-0xb8ff]
pci 0000:08:00.0: reg 0x30: [mem 0xfbbc0000-0xfbbdffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:0c:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:0c:02.0: reg 0x10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:0c:02.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:0c:02.0: supports D2
pci 0000:0c:02.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0cf8-0x0cff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x023cde30-0x03ffffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0800-0x087f] could not be reserved
system 00:03: [io 0x0500-0x057f] could not be reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 400000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfb5fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xfb600000-0xfb8fffff]
pci 0000:05:01.0: PCI bridge to [bus 06]
pci 0000:05:01.0: bridge window [io 0xa000-0xafff]
pci 0000:05:01.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:05:02.0: PCI bridge to [bus 07]
pci 0000:05:02.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:04:00.0: PCI bridge to [bus 05-07]
pci 0000:04:00.0: bridge window [io 0xa000-0xafff]
pci 0000:04:00.0: bridge window [mem 0xfb900000-0xfbafffff]
pci 0000:00:09.0: PCI bridge to [bus 04-07]
pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
pci 0000:00:09.0: bridge window [mem 0xfb900000-0xfbafffff]
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 0a]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0cf8-0x0cff]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfb5fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfb600000-0xfb8fffff]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfbafffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfb900000-0xfbafffff]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:0b: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:0b: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:0a: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0c: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:0c: resource 4 [io 0x0cf8-0x0cff]
pci_bus 0000:0c: resource 5 [io 0x0000-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 8 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:0c: resource 9 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:0c: resource 10 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30828K (ffff8800343ba000 - ffff8800361d5000)
dmar: Host address width 39
dmar: DRHD base: 0x000000fbfff000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
dmar: DRHD base: 0x000000fbffe000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
dmar: RMRR base: 0x000000bf7dc000 end: 0x000000bf7dbfff
dmar: ATSR flags: 0x0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0xf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1425678168.840:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x1200x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011c00000, using 7552k, total 7552k
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:07:00.0: hcc params 0x040050a5 hci version 0x100 quirks 0x00080490
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.0-040000rc2-generic xhci-hcd
usb usb1: SerialNumber: 0000:07:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.0.0-040000rc2-generic xhci-hcd
usb usb2: SerialNumber: 0000:07:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.0.0-040000rc2-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb 3-5: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 2672.726 MHz
usb 3-5: New USB device found, idVendor=0409, idProduct=005a
usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 4 ports detected
usb 3-5.3: new high-speed USB device number 3 using ehci-pci
usb usb4: Manufacturer: Linux 4.0.0-040000rc2-generic ehci_hcd
usb 3-5.3: New USB device found, idVendor=0403, idProduct=6014
usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5.3: Product: BitFORCE SHA256 SC
usb 3-5.3: Manufacturer: FTDI
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Switched to clocksource tsc
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.0.0-040000rc2-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.0.0-040000rc2-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008c00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.0.0-040000rc2-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1a.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.0.0-040000rc2-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008400
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 4.0.0-040000rc2-generic uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008480
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 4.0.0-040000rc2-generic uhci_hcd
usb usb10: SerialNumber: 0000:00:1d.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e89b6ccacdac75885dcd8bcfce9c628bfc77baf6'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:344:752
usb usb10-port1: hash matches
tty ttyS3: hash matches
rtc_cmos 00:01: setting system clock to 2015-03-06 21:42:51 UTC (1425678171)
hpet1: lost 3 rtc interrupts
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 4-2: new high-speed USB device number 2 using ehci-pci
usb 4-2: New USB device found, idVendor=0566, idProduct=3021
usb 4-2: New USB device strings: Mfr=10, Product=11, SerialNumber=0
usb 4-2: Product: USB 2.0 HUB
usb 4-2: Manufacturer: GENESYS
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
usb 4-2.2: new full-speed USB device number 3 using ehci-pci
Freeing unused kernel memory: 1420K (ffffffff81d1e000 - ffffffff81e81000)
usb 4-2.2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2.2: Product: USB Receiver
usb 4-2.2: Manufacturer: Logitech
usb 4-2.3: new low-speed USB device number 4 using ehci-pci
usb 4-2.3: New USB device found, idVendor=0566, idProduct=3108
usb 4-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-2.4: new full-speed USB device number 5 using ehci-pci
usb 4-2.4: New USB device found, idVendor=0d8c, idProduct=0105
usb 4-2.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 4-2.4: Product: USB Multimedia Audio Device
usb 4-2.4: Manufacturer: C-Media Electronics Inc.
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 48K (ffff8800017f4000 - ffff880001800000)
Freeing unused kernel memory: 184K (ffff880001bd2000 - ffff880001c00000)
systemd-udevd[164]: starting version 208
random: systemd-udevd urandom read with 15 bits of entropy available
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
hidraw: raw HID events driver (C) Jiri Kosina
sky2: driver version 1.30
sky2 0000:0a:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:0a:00.0 eth0: addr 00:26:18:2d:dc:4f
sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 33
ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 33
ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 33
ata4: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc280 irq 33
ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 33
ata6: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc380 irq 33
ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb9ffc00 port 0xfb9ffd00 irq 35
ata8: SATA max UDMA/133 abar m512@0xfb9ffc00 port 0xfb9ffd80 irq 35
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133
ata7.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
ata1.00: ATA-8: ST32000542AS, CC34, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
firewire_ohci 0000:0c:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: HID 0566:3108 as /devices/pci0000:00/0000:00:1d.7/usb4/4-2/4-2.3/4-2.3:1.0/0003:0566:3108.0004/input/input5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
hid-generic 0003:0566:3108.0004: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3108] on usb-0000:00:1d.7-2.3/input0
input: HID 0566:3108 as /devices/pci0000:00/0000:00:1d.7/usb4/4-2/4-2.3/4-2.3:1.1/0003:0566:3108.0005/input/input6
hid-generic 0003:0566:3108.0005: input,hidraw1: USB HID v1.10 Device [HID 0566:3108] on usb-0000:00:1d.7-2.3/input1
input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/pci0000:00/0000:00:1d.7/usb4/4-2/4-2.4/4-2.4:1.3/0003:0D8C:0105.0006/input/input7
hid-generic 0003:0D8C:0105.0006: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-0000:00:1d.7-2.4/input3
firewire_core 0000:0c:02.0: created device fw0: GUID 001e8c0001edeba0, S400
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-2.2/input2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4: SATA link down (SStatus 0 SControl 300)
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg3 type 5
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A80 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 6:0:0:0: [sdd] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
random: nonblocking pool is initialized
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: failed to get NCQ Send/Recv Log Emask 0x1
ata8.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata8.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: failed to get NCQ Send/Recv Log Emask 0x1
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 7:0:0:0: Attached scsi generic sg5 type 0
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: Enabling discard_zeroes_data
sde: sde1
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sde] Attached SCSI disk
MXM: GUID detected in BIOS
checking generic (f9000000 760000) vs hw (d0000000 10000000)
checking generic (f9000000 760000) vs hw (f8000000 2000000)
fb: switching to nouveaufb from VESA VGA
scsi host8: pata_marvell
scsi host9: pata_marvell
ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
ata10: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
Console: switching to colour dummy device 80x25
sky2 0000:08:00.0 eth1: addr 00:26:18:2d:dc:4e
nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x092a00a2
nouveau [ DEVICE][0000:02:00.0] Chipset: G92 (NV92)
nouveau [ DEVICE][0000:02:00.0] Family : NV50
nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:02:00.0] BIT signature found
nouveau [ VBIOS][0000:02:00.0] version 62.92.84.00.06
nouveau [ PMC][0000:02:00.0] MSI interrupts enabled
nouveau [ PFB][0000:02:00.0] RAM type: GDDR3
nouveau [ PFB][0000:02:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:02:00.0] ZCOMP: 4032 tags
nouveau [ VOLT][0000:02:00.0] GPU voltage: 1000000uv
nouveau [ PTHERM][0000:02:00.0] FAN control: PWM
nouveau [ PTHERM][0000:02:00.0] fan management: automatic
nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
nouveau [ CLK][0000:02:00.0] 0f: core 550 MHz shader 1375 MHz memory 700 MHz
nouveau [ CLK][0000:02:00.0] --: core 399 MHz shader 810 MHz memory 499 MHz
[TTM] Zone kernel: Available graphics memory: 6147088 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000028
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 04011310 00000028
nouveau [ DRM] DCB outp 03: 02011312 00020030
nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002130
nouveau [ DRM] DCB conn 02: 00000210
nouveau [ DRM] DCB conn 03: 00000211
nouveau [ DRM] DCB conn 04: 00000213
nouveau W[ DRM] failed to create encoder 0/1/0: -19
nouveau W[ DRM] TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using CRYPT for buffer copies
nouveau [ DRM] allocated 1600x1200 fb: 0x70000, bo ffff88032c769000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 200x75
nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:02:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:02:00.0 on minor 0
raid6: sse2x1 7258 MB/s
raid6: sse2x2 8552 MB/s
raid6: sse2x4 9378 MB/s
raid6: using algorithm sse2x4 (9378 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 12524.000 MB/sec
generic_sse: 10986.000 MB/sec
xor: using function: prefetch64-sse (12524.000 MB/sec)
Btrfs loaded
sr 4:0:0:0: [sr0] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#9 Sense Key : Illegal Request [current]
sr 4:0:0:0: [sr0] tag#9 Add. Sense: Logical block address out of range
sr 4:0:0:0: [sr0] tag#9 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
blk_update_request: I/O error, dev sr0, sector 0
sr 4:0:0:0: [sr0] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 4:0:0:0: [sr0] tag#10 Sense Key : Illegal Request [current]
sr 4:0:0:0: [sr0] tag#10 Add. Sense: Logical block address out of range
sr 4:0:0:0: [sr0] tag#10 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
blk_update_request: I/O error, dev sr0, sector 0
Buffer I/O error on dev sr0, logical block 0, async page read
BTRFS: device fsid 82dcc636-2f7f-4db7-b0c8-8f290ec393c8 devid 1 transid 372126 /dev/sdd1
BTRFS: device fsid 82ffb76b-44da-4e99-9c07-ae6ee29f07b0 devid 1 transid 846 /dev/sdc1
BTRFS: device fsid 984271c5-a9e4-4852-9aee-6306cd26cacf devid 1 transid 126064 /dev/sdb1
BTRFS: device fsid b1d344e4-6950-4031-a77b-66c09789d6e8 devid 1 transid 576 /dev/sda1
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (355) killed by TERM signal
init: ureadahead main process (357) terminated with status 5
EXT4-fs (sde1): re-mounted. Opts: discard,errors=remount-ro
BTRFS info (device sdd1): disk space caching is enabled
BTRFS info (device sdb1): disk space caching is enabled
BTRFS info (device sda1): disk space caching is enabled
BTRFS info (device sdc1): disk space caching is enabled
systemd-udevd[742]: starting version 208
lp: driver loaded but no devices found
w83627ehf: Found W83667HG chip at 0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150204/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i5500_temp 0000:00:14.3: Sensor seems to be disabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ppdev: user-space parallel port driver
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
w83627ehf: Found W83667HG chip at 0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150204/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20150204/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20150204/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20150204/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
audit: type=1400 audit(1425678206.011:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1009 comm="apparmor_parser"
audit: type=1400 audit(1425678206.011:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1009 comm="apparmor_parser"
audit: type=1400 audit(1425678206.011:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1009 comm="apparmor_parser"
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1425678206.011:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1021 comm="apparmor_parser"
audit: type=1400 audit(1425678206.011:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1021 comm="apparmor_parser"
audit: type=1400 audit(1425678206.011:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1021 comm="apparmor_parser"
audit: type=1400 audit(1425678206.011:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=1016 comm="apparmor_parser"
input: Logitech Performance MX as /devices/pci0000:00/0000:00:1d.7/usb4/4-2/4-2.2/4-2.2:1.2/0003:046D:C52B.0003/0003:046D:101A.0007/input/input8
logitech-hidpp-device 0003:046D:101A.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:1d.7-2.2:1
wl: module verification failed: signature and/or required key missing - tainting kernel
ip_tables: (C) 2000-2006 Netfilter Core Team
audit: type=1400 audit(1425678206.031:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1025 comm="apparmor_parser"
audit: type=1400 audit(1425678206.031:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1025 comm="apparmor_parser"
audit: type=1400 audit(1425678206.031:11): apparmor="STATUS" operation="profile_load" name="third_party" pid=1025 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
init: cups main process (1047) killed by HUP signal
init: cups main process ended, respawning
wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
ip6_tables: (C) 2000-2006 Netfilter Core Team
device-mapper: multipath: version 1.8.0 loaded
usbcore: registered new interface driver snd-usb-audio
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: munin-node main process (1233) terminated with status 127
init: munin-node main process ended, respawning
init: failsafe main process (1192) killed by TERM signal
init: samba-ad-dc main process (1434) terminated with status 1
sound hdaudioC0D0: autoconfig for AD1989B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1b/0x1d
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x14
sound hdaudioC0D0: Rear Mic=0x17
sound hdaudioC0D0: Line=0x15
sound hdaudioC0D0: CD=0x18
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
systemd-logind[1492]: New seat seat0.
systemd-logind[1492]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[1492]: Watching system buttons on /dev/input/event0 (Power Button)
sky2 0000:0a:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 0000:08:00.0 eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-5.3:1.0: FTDI USB Serial Device converter detected
usb 3-5.3: Detected FT232H
usb 3-5.3: FTDI USB Serial Device converter now attached to ttyUSB0
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
init: kdm main process (1921) killed by TERM signal
init: gdm main process (2347) killed by TERM signal
systemd-logind[1492]: Failed to start unit user@129.service: Unknown unit: user@129.service
systemd-logind[1492]: Failed to start user service: Unknown unit: user@129.service
systemd-logind[1492]: New session c1 of user lightdm.
systemd-logind[1492]: Linked /tmp/.X11-unix/X0 to /run/user/129/X11-display.
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Adding 1805808k swap on 1. Priority:-1 extents:93 across:46157300k SSFS
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x209 offMax=0x1a0b
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.24 (interface 0x001a0009).
systemd-logind[1492]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[1492]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[1492]: New session c2 of user sune.
systemd-logind[1492]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
vboxpci: IOMMU not found (not registered)
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
audit_printk_skb: 174 callbacks suppressed
audit: type=1400 audit(1425678238.086:70): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=4945 comm="apparmor_parser"
audit: type=1400 audit(1425678238.086:71): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=4945 comm="apparmor_parser"
audit: type=1400 audit(1425678238.110:72): apparmor="STATUS" operation="profile_replace" name="third_party" pid=4945 comm="apparmor_parser"
audit: type=1400 audit(1425678266.434:73): apparmor="ALLOWED" operation="open" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libnss3.so" pid=5454 comm="chromium-browse" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.434:74): apparmor="ALLOWED" operation="file_mmap" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libnss3.so" pid=5454 comm="chromium-browse" requested_mask="mr" denied_mask="mr" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.434:75): apparmor="ALLOWED" operation="open" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libnssutil3.so" pid=5454 comm="chromium-browse" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.434:76): apparmor="ALLOWED" operation="file_mmap" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libnssutil3.so" pid=5454 comm="chromium-browse" requested_mask="mr" denied_mask="mr" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.438:77): apparmor="ALLOWED" operation="open" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libsmime3.so" pid=5454 comm="chromium-browse" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.438:78): apparmor="ALLOWED" operation="file_mmap" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libsmime3.so" pid=5454 comm="chromium-browse" requested_mask="mr" denied_mask="mr" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.438:79): apparmor="ALLOWED" operation="open" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libplds4.so" pid=5454 comm="chromium-browse" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.438:80): apparmor="ALLOWED" operation="file_mmap" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libplds4.so" pid=5454 comm="chromium-browse" requested_mask="mr" denied_mask="mr" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.438:81): apparmor="ALLOWED" operation="open" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libplc4.so" pid=5454 comm="chromium-browse" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1425678266.438:82): apparmor="ALLOWED" operation="file_mmap" profile="/usr/lib/chromium-browser/chromium-browser" name="/opt/seamonkey-2.36a1-2/libplc4.so" pid=5454 comm="chromium-browse" requested_mask="mr" denied_mask="mr" fsuid=1000 ouid=0
perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
nouveau E[Xorg[2064]] nv50cal_space: -16