dmesg - mp3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.7-7-desktop (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000957ff] usable
BIOS-e820: [mem 0x0000000000095800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000defa57ff] usable
BIOS-e820: [mem 0x00000000defa5800-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000051fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.15 10/29/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x520000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 base 0520000000 mask FFE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xdefa5 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008f000] 8f000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
init_memory_mapping: [mem 0x51fe00000-0x51fffffff]
[mem 0x51fe00000-0x51fffffff] page 2M
BRK [0x0220e000, 0x0220efff] PGTABLE
init_memory_mapping: [mem 0x51c000000-0x51fdfffff]
[mem 0x51c000000-0x51fdfffff] page 2M
init_memory_mapping: [mem 0x500000000-0x51bffffff]
[mem 0x500000000-0x51bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdefa4fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdedfffff] page 2M
[mem 0xdee00000-0xdefa4fff] page 4k
init_memory_mapping: [mem 0x100000000-0x4ffffffff]
[mem 0x100000000-0x4ffffffff] page 1G
RAMDISK: [mem 0x370d8000-0x37863fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DEFB88E8 00006C (v01 HPQOEM SLIC-WKS 20101029 00000000)
ACPI: FACP 0x00000000DEFB8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20140424/tbfadt-699)
ACPI: DSDT 0x00000000DEFB90A3 00A2BD (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000DEFB8800 000040
ACPI: APIC 0x00000000DEFB8B7C 000108 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: ASF! 0x00000000DEFB8C84 000063 (v32 HPQOEM TYLSBURG 00000001 00000000)
ACPI: MCFG 0x00000000DEFB8CE7 00003C (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: TCPA 0x00000000DEFB8D23 000032 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SLIC 0x00000000DEFB8D55 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 0x00000000DEFB8ECB 000038 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DMAR 0x00000000DEFB8F03 000170 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SSDT 0x00000000DEFC4A4F 00366C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000051fffffff]
Initmem setup node 0 [mem 0x00000000-0x51fffffff]
NODE_DATA [mem 0x51ffea000-0x51fffdfff]
[ffffea0000000000-ffffea0011ffffff] PMD -> [ffff88050b600000-ffff88051cffffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x51fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00094fff]
node 0: [mem 0x00100000-0xdefa4fff]
node 0: [mem 0x100000000-0x51fffffff]
On node 0 totalpages: 5238585
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3988 pages, LIFO batch:0
DMA32 zone: 12431 pages used for memmap
DMA32 zone: 909221 pages, LIFO batch:31
Normal zone: 59136 pages used for memmap
Normal zone: 4325376 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xdefa5000-0xdefa5fff]
PM: Registered nosave memory: [mem 0xdefa6000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
e820: [mem 0xe0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88051fc00000 s79104 r8192 d23296 u131072
pcpu-alloc: s79104 r8192 d23296 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 5166941
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 20571136K/20954340K available (6302K kernel code, 1009K rwdata, 4708K rodata, 1560K init, 1532K bss, 383204K reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:33024 nr_irqs:1216 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2666.609 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.21 BogoMIPS (lpj=2666609)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff82084000 - ffffffff8208a000)
ftrace: allocating 24400 entries in 96 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f02076
dmar: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
dmar: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
dmar: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
dmar: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
dmar: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
dmar: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
dmar: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
dmar: RMRR base: 0x000000defd7000 end: 0x000000defd7fff
dmar: ATSR flags: 0x0
This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (fam: 06, model: 2c, stepping: 02)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (63998.61 BogoMIPS)
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
RTC time: 17:48:40, date: 02/28/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20140424/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88051f045798), AE_ALREADY_EXISTS (20140424/psparse-536)
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af]; [io 0x0000-0x03af] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [io 0x1000-0xefff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xd020-0xd03f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xd040-0xd05f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xed004800-0xed004bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xed000000-0xed003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xd060-0xd07f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xd0a0-0xd0bf]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xed004c00-0xed004fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: no compatible bridge window
pci 0000:00:1f.0: can't claim BAR 14 [io 0xfa00-0xfa3f]: no compatible bridge window
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xd100-0xd107]
pci 0000:00:1f.2: reg 0x14: [io 0xd110-0xd113]
pci 0000:00:1f.2: reg 0x18: [io 0xd108-0xd10f]
pci 0000:00:1f.2: reg 0x1c: [io 0xd114-0xd117]
pci 0000:00:1f.2: reg 0x20: [io 0xd0c0-0xd0df]
pci 0000:00:1f.2: reg 0x24: [mem 0xed004000-0xed0047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:03.0: PCI bridge to [bus 0f]
pci 0000:28:00.0: [10de:11c0] type 00 class 0x030000
pci 0000:28:00.0: reg 0x10: [mem 0xea000000-0xeaffffff]
pci 0000:28:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:28:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:28:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:28:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:28:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:28:00.1: reg 0x10: [mem 0xeb000000-0xeb003fff]
pci 0000:00:07.0: PCI bridge to [bus 28]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xea000000-0xeb0fffff]
pci 0000:00:07.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:1c:00.0: [1106:3432] type 00 class 0x0c0330
pci 0000:1c:00.0: reg 0x10: [mem 0xee000000-0xee000fff]
pci 0000:1c:00.0: supports D1 D2
pci 0000:1c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 1c]
pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xec00ffff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 01]
pci 0000:00:1c.5: bridge window [mem 0xec000000-0xec0fffff]
pci 0000:37:05.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:37:05.0: reg 0x10: [mem 0xef000000-0xef000fff]
pci 0000:37:05.0: supports D1 D2
pci 0000:37:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xef000000-0xef0fffff]
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xefff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:3f:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:3f:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:3f:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:28:00.0
vgaarb: device added: PCI:0000:28:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:28:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00095800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdefa5800-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:05: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:05: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:05: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
system 00:05: [io 0x0400-0x041f] has been reserved
system 00:05: [io 0x0420-0x043f] has been reserved
system 00:05: [io 0x0440-0x045f] has been reserved
system 00:05: [io 0x0460-0x047f] has been reserved
system 00:05: [io 0x0480-0x048f] has been reserved
system 00:05: [io 0xfa00-0xfa3f] has been reserved
system 00:05: [io 0xfc00-0xfc7f] has been reserved
system 00:05: [io 0xfc80-0xfcff] has been reserved
system 00:05: [io 0xfe00-0xfe7f] has been reserved
system 00:05: [io 0xfe80-0xfeff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x4700-0x470b] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:07: [mem 0x000e8000-0x000fffff] could not be reserved
system 00:07: [mem 0xfec01000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed00000-0xfed3ffff] could not be reserved
system 00:07: [mem 0xfed40000-0xffffffff] could not be reserved
system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:07: [mem 0x000dac00-0x000e7fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment
pci 0000:00:1f.0: BAR 14: [io 0xfa00-0xfa3f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xeb100000-0xeb2fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xeb300000-0xeb4fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:03.0: PCI bridge to [bus 0f]
pci 0000:28:00.0: BAR 6: assigned [mem 0xeb080000-0xeb0fffff pref]
pci 0000:00:07.0: PCI bridge to [bus 28]
pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xea000000-0xeb0fffff]
pci 0000:00:07.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 1c]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
pci 0000:00:1c.0: bridge window [mem 0xeb100000-0xeb2fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 01]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xec000000-0xec0fffff]
pci 0000:00:1c.5: bridge window [mem 0xeb300000-0xeb4fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 37]
pci 0000:00:1e.0: bridge window [mem 0xef000000-0xef0fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: resource 6 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 8 [io 0x0000-0x03af]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 10 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 11 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 12 [io 0x1000-0xefff]
pci_bus 0000:28: resource 0 [io 0xe000-0xefff]
pci_bus 0000:28: resource 1 [mem 0xea000000-0xeb0fffff]
pci_bus 0000:28: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:1c: resource 1 [mem 0xee000000-0xee0fffff]
pci_bus 0000:1c: resource 2 [mem 0xeb100000-0xeb2fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
pci_bus 0000:01: resource 2 [mem 0xeb300000-0xeb4fffff 64bit pref]
pci_bus 0000:37: resource 1 [mem 0xef000000-0xef0fffff]
pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:37: resource 5 [mem 0xe0000000-0xefffffff]
pci_bus 0000:37: resource 6 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:37: resource 7 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:37: resource 8 [io 0x0000-0x03af]
pci_bus 0000:37: resource 9 [io 0x03b0-0x03df]
pci_bus 0000:37: resource 10 [io 0x03e0-0x0cf7]
pci_bus 0000:37: resource 11 [io 0x0d00-0x0fff]
pci_bus 0000:37: resource 12 [io 0x1000-0xefff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:28:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7728K (ffff8800370d8000 - ffff880037864000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdafa5000-0xdefa5000] (64MB) mapped at [ffff8800dafa5000-ffff8800defa4fff]
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x13
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x13
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1425145720.049:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 65 for MSI/MSI-X
ioapic: probe of 0000:00:15.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe9000000, mapped to 0xffffc90007600000, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004100 irq 66
ata2: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004180 irq 66
ata3: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004200 irq 66
ata4: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004280 irq 66
ata5: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004300 irq 66
ata6: SATA max UDMA/133 abar m2048@0xed004000 port 0xed004380 irq 66
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xed004800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.7-7-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xed004c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.7-7-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000d000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.7-7-desktop uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.7-7-desktop uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000d040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.7-7-desktop uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.7-7-desktop uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000d080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.7-7-desktop uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000d0a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.7-7-desktop uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Loading compiled-in X.509 certificates
registered taskstats version 1
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 3:670:846
cpu cpu10: hash matches
rtc_cmos 00:00: setting system clock to 2015-02-28 17:48:41 UTC (1425145721)
PM: Checking hibernation image partition /dev/sda1
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 2666.666 MHz
usb 2-1: New USB device found, idVendor=04cc, idProduct=1520
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/100
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 1), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD3200KS-00P 0M21 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1560K (ffffffff81efe000 - ffffffff82084000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1880K (ffff88000162a000 - ffff880001800000)
Freeing unused kernel memory: 1436K (ffff880001c99000 - ffff880001e00000)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
random: systemd urandom read with 31 bits of entropy available
systemd-journald[229]: Failed to set file attributes: Inappropriate ioctl for device
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Attached scsi generic sg2 type 5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
Floppy drive(s): fd0 is 1.44M
wmi: Mapper loaded
xhci_hcd 0000:1c:00.0: xHCI Host Controller
xhci_hcd 0000:1c:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:1c:00.0: irq 67 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.16.7-7-desktop xhci_hcd
usb usb9: SerialNumber: 0000:1c:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 1 port detected
xhci_hcd 0000:1c:00.0: xHCI Host Controller
xhci_hcd 0000:1c:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.16.7-7-desktop xhci_hcd
usb usb10: SerialNumber: 0000:1c:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 4 ports detected
sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
FDC 0 is a post-1991 82077
firewire_ohci 0000:37:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=10d5, idProduct=5552
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: KVM
usb 2-1.1: Manufacturer: No brand
input: No brand KVM as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/0003:10D5:5552.0001/input/input5
hid-generic 0003:10D5:5552.0001: input,hidraw0: USB HID v1.10 Keyboard [No brand KVM] on usb-0000:00:1d.7-1.1/input0
input: No brand KVM as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.1/0003:10D5:5552.0002/input/input6
hid-generic 0003:10D5:5552.0002: input,hidraw1: USB HID v1.10 Mouse [No brand KVM] on usb-0000:00:1d.7-1.1/input1
usb 2-1.3: new high-speed USB device number 4 using ehci-pci
usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: USB2.0 Hub
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
PM: Marking nosave pages: [mem 0x00095000-0x000fffff]
PM: Marking nosave pages: [mem 0xdefa5000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 9-1: new high-speed USB device number 2 using xhci_hcd
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
usb 9-1: New USB device found, idVendor=2109, idProduct=0811
usb 9-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 9-1: Product: USB2.0 Hub
hub 9-1:1.0: USB hub found
hub 9-1:1.0: 4 ports detected
firewire_core 0000:37:05.0: created device fw0: GUID 0060b0000078b537, S400
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
usb 2-1.3.1: new high-speed USB device number 5 using ehci-pci
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
usb 2-1.3.1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3.1: Product: USB2.0 Hub
hub 2-1.3.1:1.0: USB hub found
hub 2-1.3.1:1.0: 4 ports detected
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
Switched to clocksource tsc
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
[drm] Initialized drm 1.1.0 20060810
input: PC Speaker as /devices/platform/pcspkr/input/input7
SSE version of gcm_enc/dec engaged.
tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 78:ac:c0:a5:6a:f3
tg3 0000:01:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X
snd_hda_intel 0000:28:00.1: Disabling MSI
snd_hda_intel 0000:28:00.1: Handle VGA-switcheroo audio client
sound hdaudioC0D0: ALC262: SKU not ready 0x411111f0
sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
ppdev: user-space parallel port driver
gpio_ich: GPIO from 195 to 255 on gpio_ich
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:28:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:28:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015
nvidia_uvm: Loaded the UVM driver, major device number 247
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:28:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:28:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:28:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:28:00.1/sound/card1/input18
input: HP WMI hotkeys as /devices/virtual/input/input9
Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k SSFS
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
usb 2-1.3: USB disconnect, device number 4
usb 2-1.3.1: USB disconnect, device number 5
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 8 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 10 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 12 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3: limiting SATA link speed to 1.5 Gbps
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 14 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
sr 2:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0]
Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00
00 00 00 00 00 40
sr 2:0:0:0: [sr0]
Add. Sense: No additional sense information
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
end_request: I/O error, dev sr0, sector 10976632
Buffer I/O error on device sr0, logical block 1372079
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 17 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
ata3: EH complete
audit: type=1305 audit(1425142303.116:2): audit_pid=889 old=0 auid=4294967295 ses=4294967295 res=1
NET: Registered protocol family 17
No iBFT detected.
tg3 0000:01:00.0: irq 69 for MSI/MSI-X
nvidia_uvm: Unregistered the UVM driver
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[drm] Module unloaded
vboxdrv: Found 12 processor cores.
vboxdrv: fAsync=0 offMin=0x2d4 offMax=0x23a0c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.22 (interface 0x001a0009).
vgaarb: device changed decodes: PCI:0000:28:00.0,olddecodes=none,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:28:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015
nvidia_uvm: Loaded the UVM driver, major device number 247
vboxpci: IOMMU not found (not registered)
nvidia 0000:28:00.0: irq 70 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
tg3 0000:01:00.0 enp1s0: Link is up at 1000 Mbps, full duplex
tg3 0000:01:00.0 enp1s0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 19 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 21 dma 4096 in
res 40/00:03:00:fc:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
ata3: EH complete
usb 2-1.3: new high-speed USB device number 6 using ehci-pci
usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: USB2.0 Hub
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
usb 2-1.3.1: new high-speed USB device number 7 using ehci-pci
usb 2-1.3.1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3.1: Product: USB2.0 Hub
hub 2-1.3.1:1.0: USB hub found
hub 2-1.3.1:1.0: 4 ports detected
ata3.00: limiting speed to UDMA/66:PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
ata3.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 23 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/66
sr 2:0:0:0: [sr0]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 2:0:0:0: [sr0]
Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00
00 00 00 00 00 40
sr 2:0:0:0: [sr0]
Add. Sense: No additional sense information
sr 2:0:0:0: [sr0] CDB:
Read(10): 28 00 00 29 df 5e 00 00 02 00
end_request: I/O error, dev sr0, sector 10976632
Buffer I/O error on device sr0, logical block 1372079
ata3: EH complete
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
fuse init (API version 7.23)
sound hdaudioC1D0: hda-codec: out of range cmd 0:6:707:ffffffbf
usb 2-1.3: USB disconnect, device number 6
usb 2-1.3.1: USB disconnect, device number 7
usb 2-1.3: new high-speed USB device number 8 using ehci-pci
usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: USB2.0 Hub
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
usb 2-1.3.1: new high-speed USB device number 9 using ehci-pci
usb 2-1.3.1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3.1: Product: USB2.0 Hub
hub 2-1.3.1:1.0: USB hub found
hub 2-1.3.1:1.0: 4 ports detected
usb 2-1.3: USB disconnect, device number 8
usb 2-1.3.1: USB disconnect, device number 9
usb 2-1.3: new high-speed USB device number 10 using ehci-pci
usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: USB2.0 Hub
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
usb 2-1.3.1: new high-speed USB device number 11 using ehci-pci
usb 2-1.3.1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3.1: Product: USB2.0 Hub
hub 2-1.3.1:1.0: USB hub found
hub 2-1.3.1:1.0: 4 ports detected