dmesg - gp
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b4373fff] usable
BIOS-e820: [mem 0x00000000b4374000-0x00000000b437bfff] reserved
BIOS-e820: [mem 0x00000000b437c000-0x00000000be17efff] usable
BIOS-e820: [mem 0x00000000be17f000-0x00000000be97efff] type 20
BIOS-e820: [mem 0x00000000be97f000-0x00000000bf97efff] reserved
BIOS-e820: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data
BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0xbfbfe000 ACPI 2.0=0xbfbfe014 SMBIOS=0xbf97ef98
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006e000) (0MB)
efi: mem02: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB)
efi: mem04: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB)
efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001501000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000001501000-0x0000000002000000) (10MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003401000) (20MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000003401000-0x0000000035b62000) (807MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000035b62000-0x0000000036da9000) (18MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000036da9000-0x0000000082b3f000) (1213MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000082b3f000-0x00000000b1380000) (744MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000b1380000-0x00000000b13a0000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000b13a0000-0x00000000b3710000) (35MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000b3710000-0x00000000b38e4000) (1MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000b38e4000-0x00000000b4374000) (10MB)
efi: mem17: type=0, attr=0xf, range=[0x00000000b4374000-0x00000000b437c000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000b437c000-0x00000000b437d000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x00000000b437d000-0x00000000b437f000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000b437f000-0x00000000b444b000) (0MB)
efi: mem21: type=1, attr=0xf, range=[0x00000000b444b000-0x00000000b457f000) (1MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000b457f000-0x00000000b9498000) (79MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000b9498000-0x00000000b98c0000) (4MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000b98c0000-0x00000000b98c1000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000b98c1000-0x00000000ba2f5000) (10MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000ba2f5000-0x00000000ba3ca000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000ba3ca000-0x00000000ba3d7000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000ba3d7000-0x00000000ba3e1000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000ba3e1000-0x00000000ba3ed000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000ba3ed000-0x00000000ba3ef000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000ba3ef000-0x00000000ba3f0000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000ba3f0000-0x00000000ba3f1000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x00000000ba3f1000-0x00000000ba3f7000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x00000000ba3f7000-0x00000000ba3f8000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x00000000ba3f8000-0x00000000ba3fb000) (0MB)
efi: mem36: type=7, attr=0xf, range=[0x00000000ba3fb000-0x00000000ba3fc000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x00000000ba3fc000-0x00000000ba3fd000) (0MB)
efi: mem38: type=7, attr=0xf, range=[0x00000000ba3fd000-0x00000000ba666000) (2MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000ba666000-0x00000000ba6fe000) (0MB)
efi: mem40: type=7, attr=0xf, range=[0x00000000ba6fe000-0x00000000ba714000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x00000000ba714000-0x00000000ba86c000) (1MB)
efi: mem42: type=7, attr=0xf, range=[0x00000000ba86c000-0x00000000ba86f000) (0MB)
efi: mem43: type=4, attr=0xf, range=[0x00000000ba86f000-0x00000000ba87d000) (0MB)
efi: mem44: type=7, attr=0xf, range=[0x00000000ba87d000-0x00000000ba880000) (0MB)
efi: mem45: type=4, attr=0xf, range=[0x00000000ba880000-0x00000000bc57f000) (28MB)
efi: mem46: type=7, attr=0xf, range=[0x00000000bc57f000-0x00000000bdd41000) (23MB)
efi: mem47: type=2, attr=0xf, range=[0x00000000bdd41000-0x00000000bdd4b000) (0MB)
efi: mem48: type=3, attr=0xf, range=[0x00000000bdd4b000-0x00000000be17f000) (4MB)
efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000be17f000-0x00000000be97f000) (8MB)
efi: mem50: type=6, attr=0x800000000000000f, range=[0x00000000be97f000-0x00000000bf17f000) (8MB)
efi: mem51: type=0, attr=0xf, range=[0x00000000bf17f000-0x00000000bf97f000) (8MB)
efi: mem52: type=10, attr=0xf, range=[0x00000000bf97f000-0x00000000bfb7f000) (2MB)
efi: mem53: type=9, attr=0xf, range=[0x00000000bfb7f000-0x00000000bfbff000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x00000000bfbff000-0x00000000bfc00000) (0MB)
efi: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f000000) (496MB)
efi: mem56: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
efi: mem57: type=0, attr=0x0, range=[0x00000000bfc00000-0x00000000e0000000) (516MB)
efi: mem58: type=11, attr=0x8000000000000000, range=[0x00000000f0900000-0x00000000f0a00000) (1MB)
efi: mem59: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec02000) (0MB)
efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem64: type=11, attr=0x8000000000000000, range=[0x00000000ff800000-0x0000000100000000) (8MB)
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP 255 G3 Notebook PC/22CD, BIOS F.12 04/12/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00BFB67000 mask FFFFFFF000 uncachable
3 base 00FF800000 mask FFFF800000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000011f000000 aka 4592M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007c000] 7c000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fdf000, 0x02fdffff] PGTABLE
BRK [0x02fe0000, 0x02fe0fff] PGTABLE
BRK [0x02fe1000, 0x02fe1fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[mem 0x11c000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb4373fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xb41fffff] page 2M
[mem 0xb4200000-0xb4373fff] page 4k
init_memory_mapping: [mem 0xb437c000-0xbe17efff]
[mem 0xb437c000-0xb43fffff] page 4k
[mem 0xb4400000-0xbdffffff] page 2M
[mem 0xbe000000-0xbe17efff] page 4k
BRK [0x02fe3000, 0x02fe3fff] PGTABLE
init_memory_mapping: [mem 0xbfbff000-0xbfbfffff]
[mem 0xbfbff000-0xbfbfffff] page 4k
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
RAMDISK: [mem 0x35b62000-0x36da8fff]
ACPI: RSDP 00000000bfbfe014 000024 (v02 HPQOEM)
ACPI: XSDT 00000000bfbfe120 0000C4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000bfbfc000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: DSDT 00000000bfbe9000 00E202 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
ACPI: FACS 00000000bfb2d000 000040
ACPI: UEFI 00000000bfbfd000 0001B6 (v01 HPQOEM 22CD 00000001 HP 00040000)
ACPI: HPET 00000000bfbfb000 000038 (v01 HPQOEM 22CD 00000001 HP 00040000)
ACPI: APIC 00000000bfbfa000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 00000000bfbf9000 00003C (v01 HPQOEM 22CD 00000001 HP 00040000)
ACPI: ASF! 00000000bfbf8000 0000A5 (v32 HPQOEM 22CD 00000001 HP 00040000)
ACPI: BOOT 00000000bfbe8000 000028 (v01 HPQOEM 22CD 00000001 HP 00040000)
ACPI: FPDT 00000000bfbe6000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MSDM 00000000bfbe5000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 00000000bfbe4000 00043C (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbdf000 00487A (v02 HPQOEM 22CD 00000002 ACPI 00040000)
ACPI: VFCT 00000000bfbd0000 00EC84 (v01 HPQOEM 22CD 00000001 HP 00040000)
ACPI: SSDT 00000000bfbcf000 000692 (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbce000 000170 (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbcd000 000418 (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbcb000 0016EB (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbca000 00008C (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbc8000 001138 (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: BGRT 00000000bfbc7000 000038 (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: SSDT 00000000bfbc6000 000F8A (v01 HPQOEM 22CD 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
Initmem setup node 0 [mem 0x00000000-0x11effffff]
NODE_DATA [mem 0x11eff9000-0x11effdfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006dfff]
node 0: [mem 0x00070000-0x00085fff]
node 0: [mem 0x00100000-0xb4373fff]
node 0: [mem 0xb437c000-0xbe17efff]
node 0: [mem 0xbfbff000-0xbfbfffff]
node 0: [mem 0x100000000-0x11effffff]
On node 0 totalpages: 905467
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3971 pages, LIFO batch:0
DMA32 zone: 12102 pages used for memmap
DMA32 zone: 774520 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00086000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb4374000-0xb437bfff]
PM: Registered nosave memory: [mem 0xbe17f000-0xbe97efff]
PM: Registered nosave memory: [mem 0xbe97f000-0xbf97efff]
PM: Registered nosave memory: [mem 0xbf97f000-0xbfb7efff]
PM: Registered nosave memory: [mem 0xbfb7f000-0xbfbfefff]
PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf08fffff]
PM: Registered nosave memory: [mem 0xf0900000-0xf09fffff]
PM: Registered nosave memory: [mem 0xf0a00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xe0000000-0xf08fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 891295
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3400816K/3621868K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 221052K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1347.494 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2694.98 BogoMIPS (lpj=5389976)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bfc00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD E1-6010 APU with AMD Radeon R2 Graphics (fam: 16, model: 30, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (5389.97 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xbf97f000-0xbfb7efff] (2097152 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:55:53, date: 02/25/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9853] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0e00000-0xf0e3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0e60000-0xf0e63fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: System wakeup disabled by ACPI
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0e40000-0xf0e5ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0e70000-0xf0e70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0e6a000-0xf0e6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0e68000-0xf0e69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0e6f000-0xf0e6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf0e6e000-0xf0e6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xf0e6d000-0xf0e6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0e64000-0xf0e67fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf0e6c000-0xf0e6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xf0d00000-0xf0d00fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [mem 0xf0d00000-0xf0dfffff]
pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf0c00000-0xf0c7ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:02.5: PCI bridge to [bus 04]
pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0xb4374000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xbe17f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN1ead PNP0f13 (active)
system 00:08: [io 0x0400-0x04cf] could not be reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x077a] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cdb] has been reserved
system 00:08: [io 0x0840-0x0847] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xff800000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xff800000-0xffffffff]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:02.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:02.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:02.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:02.1: BAR 14: assigned [mem 0xf0f00000-0xf10fffff]
pci 0000:00:02.1: BAR 15: assigned [mem 0xf1100000-0xf12fffff 64bit pref]
pci 0000:00:02.4: BAR 15: assigned [mem 0xf1300000-0xf13fffff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0e80000-0xf0e9ffff pref]
pci 0000:00:02.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.1: bridge window [mem 0xf0f00000-0xf10fffff]
pci 0000:00:02.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [mem 0xf0d00000-0xf0dfffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf1300000-0xf130ffff pref]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:00:02.4: bridge window [mem 0xf1300000-0xf13fffff pref]
pci 0000:00:02.5: PCI bridge to [bus 04]
pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0f00000-0xf10fffff]
pci_bus 0000:01: resource 2 [mem 0xf1100000-0xf12fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf0dfffff]
pci_bus 0000:03: resource 1 [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:03: resource 2 [mem 0xf1300000-0xf13fffff pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xf0b00000-0xf0bfffff]
pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18716K (ffff880035b62000 - ffff880036da9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb5498000-0xb9498000] (64MB) mapped at [ffff8800b5498000-ffff8800b9497fff]
Simple Boot Flag at 0x44 set to 0x1
perf: AMD NB counters detected
perf: AMD L2I counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x07030104
microcode: CPU1: patch_level=0x07030104
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1424865354.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6799
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.1: device [1022:1439] has invalid IRQ; check vendor BIOS
pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS
pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS
pcieport 0000:00:02.5: device [1022:1439] has invalid IRQ; check vendor BIOS
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
ipmi message handler version 39.2
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TSZ0] (49 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TSZ2] (20 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf0e6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xf0e6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:909:934
rtc_cmos 00:04: setting system clock to 2015-02-25 11:55:55 UTC (1424865355)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880002734000 - ffff880002800000)
Freeing unused kernel memory: 696K (ffff880002b52000 - ffff880002c00000)
systemd-udevd[104]: starting version 204
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
rtsx_pci 0000:02:00.0: irq 75 for MSI/MSI-X
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 75
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 76 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 77 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8106e at 0xffffc90000678000, 6c:c2:17:ea:d2:22, XID 04900000 IRQ 77
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=0438, idProduct=7900
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f100 irq 76
ata2: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f180 irq 76
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
sdhci-pci 0000:00:14.7: dummy supplies not allowed
mmc1: no vqmmc regulator found
sdhci-pci 0000:00:14.7: dummy supplies not allowed
mmc1: no vmmc regulator found
mmc1: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 1-1.4: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 1347.472 MHz
usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3121
usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=04f2, idProduct=b47e
usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-1.1: Product: HP Webcam
usb 2-1.1: Manufacturer: Chicony Electronics Co., Ltd.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: HGST HTS545050A7E680, GG2OAH10, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 GG2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: hp DVDRW DU8A5SHL, ZH63, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVDRW DU8A5SHL ZH63 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00133/0x240000/0xa2400, board id: 2665, fw id: 1458825
Switched to clocksource tsc
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
random: nonblocking pool is initialized
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Adding 2047996k swap on /dev/sda6. Priority:-1 extents:1 across:2047996k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[274]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
wmi: Mapper loaded
cfg80211: Calling CRDA to update world regulatory domain
ath: phy0: WB335 1-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90004e80000, irq=36
type=1400 audit(1424861765.987:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=338 comm="apparmor_parser"
type=1400 audit(1424861765.987:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=338 comm="apparmor_parser"
type=1400 audit(1424861765.987:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=338 comm="apparmor_parser"
type=1400 audit(1424861765.987:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=338 comm="apparmor_parser"
type=1400 audit(1424861765.987:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=338 comm="apparmor_parser"
type=1400 audit(1424861765.987:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=338 comm="apparmor_parser"
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
hda-intel 0000:00:01.1: Using LPIB position fix
snd_hda_intel 0000:00:01.1: irq 78 for MSI/MSI-X
hda-intel 0000:00:01.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
hda-intel 0000:00:14.2: Using LPIB position fix
snd_hda_intel 0000:00:14.2: irq 79 for MSI/MSI-X
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x40e00001
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x19
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x40e00001 for NID 0x1d
realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0282
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
usbcore: registered new interface driver ath3k
kvm: disabled by bios
usb 1-1.4: USB disconnect, device number 3
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b47e)
input: HP Webcam as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: HP WMI hotkeys as /devices/virtual/input/input12
init: udev-fallback-graphics main process (610) terminated with status 1
init: failsafe main process (679) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1424861770.851:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=785 comm="apparmor_parser"
type=1400 audit(1424861770.851:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=785 comm="apparmor_parser"
type=1400 audit(1424861770.851:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=785 comm="apparmor_parser"
init: cups main process (791) killed by HUP signal
init: cups main process ended, respawning
type=1400 audit(1424861771.675:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=855 comm="apparmor_parser"
type=1400 audit(1424861771.675:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=855 comm="apparmor_parser"
type=1400 audit(1424861771.675:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=855 comm="apparmor_parser"
type=1400 audit(1424861771.683:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=856 comm="apparmor_parser"
type=1400 audit(1424861771.683:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=856 comm="apparmor_parser"
type=1400 audit(1424861771.683:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser"
type=1400 audit(1424861771.699:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=856 comm="apparmor_parser"
type=1400 audit(1424861771.699:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser"
type=1400 audit(1424861771.699:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=856 comm="apparmor_parser"
type=1400 audit(1424861771.703:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=857 comm="apparmor_parser"
usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3121
usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0 eth0: link down
vmmon: module verification failed: signature and/or required key missing - tainting kernel
/dev/vmmon[1018]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1018]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=57)
Initialized host personality
NET: Registered protocol family 40
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 1141 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
/dev/vmnet: open called by PID 1183 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1185 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1196 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 1197 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1201 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
init: plymouth-stop pre-start process (1452) terminated with status 1
audit_printk_skb: 123 callbacks suppressed
type=1400 audit(1424861800.359:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2143 comm="apparmor_parser"
type=1400 audit(1424861800.359:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2143 comm="apparmor_parser"
type=1400 audit(1424861800.359:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2143 comm="apparmor_parser"
hack[4350]: segfault at 7f3725154b91 ip 00007f16aee03bac sp 00007fff216e68a8 error 4 in libc-2.19.so[7f16aecfa000+1bc000]
systemd-hostnamed[4448]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5665]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000