dmesg - 11
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.12.0-sabayon (root@andromeda.sabayon.org) (gcc version 4.8.3 (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) ) #1 SMP Mon Jan 26 02:44:33 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdad3fff] usable
BIOS-e820: [mem 0x00000000bdad4000-0x00000000be091fff] reserved
BIOS-e820: [mem 0x00000000be092000-0x00000000be09bfff] ACPI data
BIOS-e820: [mem 0x00000000be09c000-0x00000000be48ffff] ACPI NVS
BIOS-e820: [mem 0x00000000be490000-0x00000000bf150fff] reserved
BIOS-e820: [mem 0x00000000bf151000-0x00000000bf151fff] usable
BIOS-e820: [mem 0x00000000bf152000-0x00000000bf357fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf358000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD5, BIOS FCb 05/31/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D4FFF write-protect
D5000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000043f000000 aka 17392M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd9d0-0x000fd9df] mapped at [ffff8800000fd9d0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0230d000, 0x0230dfff] PGTABLE
BRK [0x0230e000, 0x0230efff] PGTABLE
BRK [0x0230f000, 0x0230ffff] PGTABLE
init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[mem 0x43ee00000-0x43effffff] page 2M
BRK [0x02310000, 0x02310fff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43edfffff]
[mem 0x43c000000-0x43edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbdad3fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbd9fffff] page 2M
[mem 0xbda00000-0xbdad3fff] page 4k
init_memory_mapping: [mem 0xbf151000-0xbf151fff]
[mem 0xbf151000-0xbf151fff] page 4k
BRK [0x02311000, 0x02311fff] PGTABLE
init_memory_mapping: [mem 0xbf358000-0xbf7fffff]
[mem 0xbf358000-0xbf3fffff] page 4k
[mem 0xbf400000-0xbf7fffff] page 2M
BRK [0x02312000, 0x02312fff] PGTABLE
init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x346ca000-0x3635cfff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000be094078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000be099da0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603)
ACPI: DSDT 00000000be094170 05C2D (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000be48af80 00040
ACPI: APIC 00000000be099e98 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000be099f38 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000be099f80 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000be099fc0 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000be099ff8 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: MATS 00000000be09b710 00034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: IVRS 00000000be09b748 00100 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: BGRT 00000000be09b848 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
Initmem setup node 0 [mem 0x00000000-0x43effffff]
NODE_DATA [mem 0x43eff7000-0x43effbfff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbdad3fff]
node 0: [mem 0xbf151000-0xbf151fff]
node 0: [mem 0xbf358000-0xbf7fffff]
node 0: [mem 0x100001000-0x43effffff]
On node 0 totalpages: 4181785
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12094 pages used for memmap
DMA32 zone: 774013 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3403775 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdad4000-0xbe091fff]
PM: Registered nosave memory: [mem 0xbe092000-0xbe09bfff]
PM: Registered nosave memory: [mem 0xbe09c000-0xbe48ffff]
PM: Registered nosave memory: [mem 0xbe490000-0xbf150fff]
PM: Registered nosave memory: [mem 0xbf152000-0xbf357fff]
PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88043ec00000 s75968 r8192 d22336 u262144
pcpu-alloc: s75968 r8192 d22336 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116422
Policy zone: Normal
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ f8000000 size 64 MB
Memory: 16348944K/16727140K available (8508K kernel code, 1006K rwdata, 4108K rodata, 1136K init, 936K bss, 378196K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
NR_IRQS:4352 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4018.416 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8036.83 BogoMIPS (lpj=4018416)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
Initializing cgroup subsys perf_event
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff82219000 - ffffffff82221000)
ACPI: Core revision 20130725
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
MCE: In-kernel MCE decoding enabled.
smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (64294.65 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbe09c000-0xbe48ffff] (4145152 bytes)
PM: Registering ACPI NVS region [mem 0xbf152000-0xbf357fff] (2121728 bytes)
xor: automatically using best checksumming function:
avx : 4980.000 MB/sec
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
raid6: sse2x1 7281 MB/s
raid6: sse2x2 11515 MB/s
raid6: sse2x4 13582 MB/s
raid6: using algorithm sse2x4 (13582 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb07000-0xfeb073ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb05000-0xfeb050ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb04000-0xfeb04fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb03000-0xfeb030ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb02000-0xfeb02fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb01000-0xfeb01fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0500000-0xd0503fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:04.0: bridge window [mem 0xd0500000-0xd05fffff 64bit pref]
pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:04:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:04:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:04:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:04:00.0: reg 0x24: [mem 0xfe710000-0xfe7101ff]
pci 0000:04:00.0: reg 0x30: [mem 0xfe700000-0xfe70ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe600000-0xfe600fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0b.0: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xa000-0xa0ff]
pci 0000:06:00.0: reg 0x18: [mem 0xfe500000-0xfe500fff 64bit]
pci 0000:06:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PCI bridge to [bus 06]
pci 0000:00:0c.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0c.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:0c.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0x9000-0x90ff]
pci 0000:07:00.0: reg 0x18: [mem 0xfe400000-0xfe400fff 64bit]
pci 0000:07:00.0: reg 0x20: [mem 0xd0200000-0xd0203fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PCI bridge to [bus 07]
pci 0000:00:0d.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0d.0: bridge window [mem 0xd0200000-0xd02fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0x8000-0x80ff]
pci 0000:09:00.0: reg 0x18: [mem 0xd0104000-0xd0104fff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0xd0100000-0xd0103fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:15.0: PCI bridge to [bus 09]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
pci 0000:0a:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 0a]
pci 0000:00:15.1: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:0b:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x10: [io 0x7040-0x7047]
pci 0000:0b:00.0: reg 0x14: [io 0x7030-0x7033]
pci 0000:0b:00.0: reg 0x18: [io 0x7020-0x7027]
pci 0000:0b:00.0: reg 0x1c: [io 0x7010-0x7013]
pci 0000:0b:00.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:0b:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
pci 0000:0b:00.0: PME# supported from D3hot
pci 0000:00:15.2: PCI bridge to [bus 0b]
pci 0000:00:15.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:0c:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0c:00.0: reg 0x10: [io 0x6000-0x60ff]
pci 0000:0c:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
pci 0000:0c:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 0c]
pci 0000:00:15.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdad4000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf152000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0220-0x0227] has been reserved
system 00:02: [io 0x0228-0x0237] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfeb20000-0xfeb23fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:04.0: bridge window [mem 0xd0500000-0xd05fffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 03]
pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0a.0: PCI bridge to [bus 04]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:0b.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0b.0: bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 06]
pci 0000:00:0c.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0c.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:0c.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:00:0d.0: PCI bridge to [bus 07]
pci 0000:00:0d.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0d.0: bridge window [mem 0xd0200000-0xd02fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 08]
pci 0000:00:15.0: PCI bridge to [bus 09]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 0a]
pci 0000:00:15.1: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:15.2: PCI bridge to [bus 0b]
pci 0000:00:15.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:15.3: PCI bridge to [bus 0c]
pci 0000:00:15.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0500000-0xd05fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:07: resource 2 [mem 0xd0200000-0xd02fffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:08: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:08: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:09: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:09: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0b: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:0c: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:0c: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29260K (ffff8800346ca000 - ffff88003635d000)
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9ad4000-0xbdad4000] (64MB) mapped at [ffff8800b9ad4000-ffff8800bdad3fff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1424275202.958:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
bio: create slab at 1
Btrfs loaded
aufs 3.x-rcN-20131104
msgmni has been set to 31988
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
xenfs: not registering filesystem on non-xen platform
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.5.0.23
fnic: Successfully Initialized Trace Buffer
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.2-0[30200]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.42
Copyright(c) 2004-2013 Emulex. All rights reserved.
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
mpt2sas version 16.100.00.00 loaded
mpt3sas version 02.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
RocketRAID 3xxx/4xxx Controller driver v1.8
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
iscsi: registered transport (cxgb4i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.6.2 (Jun 06, 2013)
iscsi: registered transport (bnx2i)
VMware PVSCSI driver - version 1.0.2.0-k
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb07000 port 0xfeb07380 irq 19
ahci 0000:04:00.0: irq 73 for MSI/MSI-X
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe710000 port 0xfe710100 irq 73
ata8: SATA max UDMA/133 abar m512@0xfe710000 port 0xfe710180 irq 73
ahci 0000:0b:00.0: irq 74 for MSI/MSI-X
ahci 0000:0b:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 74
ata10: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 74
libphy: Fixed MDIO Bus: probed
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
device-mapper: raid: Loading target version 1.5.2
ledtrig-cpu: registered to indicate activity on CPUs
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
TCP: bic registered
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
regulator-dummy: disabling
acpi-cpufreq: overriding BIOS provided _PSD data
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 >
ata10.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
ata10: limiting SATA link speed to 1.5 Gbps
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040420 flags=0x0070]
sd 0:0:0:0: [sda] Attached SCSI disk
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040430 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000585b0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000585c0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000058600 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000058640 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000058680 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000586c0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000058740 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000058700 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000403e0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000058780 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000587a0 flags=0x0070]
ata2.00: ATA-8: ADATA SP900, 5.0.7b, max UDMA/133
ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: ADATA SP900, 5.0.7b, max UDMA/133
ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: ADATA SP900, 5.8.2, max UDMA/133
ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: ADATA SP900, 5.8.2, max UDMA/133
ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ADATA SP900 5.0. PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ADATA SP900 5.0. PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
ata4.00: configured for UDMA/133
ata6.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ADATA SP900 5.8. PQ: 0 ANSI: 5
sdc: sdc1 sdc2 sdc3 sdc4
sd 3:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI disk
sdd: sdd1 sdd2 sdd3 sdd4
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ADATA SP900 5.8. PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdf] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3 sde4
sd 4:0:0:0: [sde] Attached SCSI disk
sdf: unknown partition table
sd 5:0:0:0: [sdf] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 4018.368 MHz
Switched to clocksource tsc
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata10.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040420 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000595b0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000403e0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040430 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000595c0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000059600 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000059640 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000059680 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000596c0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000059700 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000059740 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000059780 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x00000000000597a0 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040440 flags=0x0070]
AMD-Vi: Event logged [IO_PAGE_FAULT device=0b:00.1 domain=0x0000 address=0x0000000000040450 flags=0x0070]
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Freeing unused kernel memory: 1136K (ffffffff820fd000 - ffffffff82219000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1720K (ffff880001852000 - ffff880001a00000)
Freeing unused kernel memory: 2036K (ffff880001e03000 - ffff880002000000)
systemd-udevd[557]: starting version 215
Linux agpgart interface v0.103
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.0-sabayon xhci_hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.12.0-sabayon xhci_hcd
usb usb2: SerialNumber: 0000:03:00.0
[drm] Initialized drm 1.1.0 20060810
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[drm] radeon kernel modesetting enabled.
ohci-pci: OHCI PCI platform driver
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
QUIRK: Enable AMD PLL fix
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb06000
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE164).
[drm] register mmio base: 0xFEA20000
[drm] register mmio size: 131072
ATOM BIOS: C09302
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 8191564 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CEDAR Microcode
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[drm] GART: num cpu pages 262144, num gpu pages 262144
ehci-pci: EHCI PCI platform driver
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8804220eac00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8804220eac0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001239c418
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:0a:00.0: irq 77 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.12.0-sabayon xhci_hcd
usb usb4: SerialNumber: 0000:0a:00.0
radeon 0000:01:00.0: radeon: using MSI.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
[drm] radeon: irq initialized.
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.12.0-sabayon xhci_hcd
usb usb5: SerialNumber: 0000:0a:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.12.0-sabayon ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb04000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.12.0-sabayon ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb02000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.12.0-sabayon ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb01000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.12.0-sabayon ohci_hcd
usb usb8: SerialNumber: 0000:00:16.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 9
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb05000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: EHCI Host Controller
usb usb9: Manufacturer: Linux 3.12.0-sabayon ehci_hcd
usb usb9: SerialNumber: 0000:00:12.2
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xC045E000
[drm] vram apper at 0xC0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
usb 6-2: new low-speed USB device number 2 using ohci-pci
usb 6-2: New USB device found, idVendor=046d, idProduct=c03e
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB-PS/2 Optical Mouse
usb 6-2: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input4
hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2/input0
Console: switching to colour frame buffer device 160x64
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
usb 6-3: new low-speed USB device number 3 using ohci-pci
usb 6-3: New USB device found, idVendor=046a, idProduct=0023
usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/input/input5
cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:13.0-3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.1/input/input6
cherry 0003:046A:0023.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:13.0-3/input1
usb 6-2: USB disconnect, device number 2
usb 6-3: USB disconnect, device number 3
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 10
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb03000
usb 8-2: new full-speed USB device number 2 using ohci-pci
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: EHCI Host Controller
usb usb10: Manufacturer: Linux 3.12.0-sabayon ehci_hcd
usb usb10: SerialNumber: 0000:00:13.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 5 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
usb 8-2: not running at top speed; connect to a high speed hub
usb 8-2: New USB device found, idVendor=0781, idProduct=5151
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: Cruzer Micro
usb 8-2: Manufacturer: SanDisk
usb 8-2: SerialNumber: 087721190D006026
usb-storage 8-2:1.0: USB Mass Storage device detected
scsi10 : usb-storage 8-2:1.0
usb 8-2: USB disconnect, device number 2
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 11
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb00000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: EHCI Host Controller
usb usb11: Manufacturer: Linux 3.12.0-sabayon ehci_hcd
usb usb11: SerialNumber: 0000:00:16.2
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
scsi11 : pata_legacy
ata11: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
usb 6-2: new low-speed USB device number 4 using ohci-pci
scsi12 : pata_legacy
ata12: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
usb 6-2: New USB device found, idVendor=046d, idProduct=c03e
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB-PS/2 Optical Mouse
usb 6-2: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/input/input7
hid-generic 0003:046D:C03E.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2/input0
usb 6-3: new low-speed USB device number 5 using ohci-pci
usb 6-3: New USB device found, idVendor=046a, idProduct=0023
usb 6-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/input/input8
cherry 0003:046A:0023.0005: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:13.0-3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.1/input/input9
cherry 0003:046A:0023.0006: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:13.0-3/input1
scsi: Detection failed (no card)
usb 11-2: new high-speed USB device number 2 using ehci-pci
imm: Version 2.05 (for Linux 2.4.0)
usb 11-2: New USB device found, idVendor=0781, idProduct=5151
usb 11-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 11-2: Product: Cruzer Micro
usb 11-2: Manufacturer: SanDisk
usb 11-2: SerialNumber: 087721190D006026
usb-storage 11-2:1.0: USB Mass Storage device detected
scsi13 : usb-storage 11-2:1.0
uhci_hcd: USB Universal Host Controller Interface driver
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
fuse init (API version 7.22)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
iscsi: registered transport (tcp)
device-mapper: dm-log-userspace: version 1.1.0 loaded
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
md: md127 stopped.
md: bind
md: bind
md: bind
md: bind
md/raid0:md127: md_size is 756998144 sectors.
md: RAID0 configuration for md127 - 1 zone
md: zone0=[sdb4/sdc4/sdd4/sde4]
zone-offset= 0KB, device-offset= 0KB, size= 378499072KB
md127: detected capacity change from 0 to 387583049728
md127: unknown partition table
scsi 13:0:0:0: Direct-Access SanDisk Cruzer Micro 8.01 PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg6 type 0
sd 13:0:0:0: [sdg] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 13:0:0:0: [sdg] Write Protect is off
sd 13:0:0:0: [sdg] Mode Sense: 45 00 00 08
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sdg: sdg1 sdg2
sd 13:0:0:0: [sdg] No Caching mode page found
sd 13:0:0:0: [sdg] Assuming drive cache: write through
sd 13:0:0:0: [sdg] Attached SCSI removable disk
md: md126 stopped.
md: bind
md: bind
md: bind
md: bind
md/raid0:md126: md_size is 83881984 sectors.
md: RAID0 configuration for md126 - 1 zone
md: zone0=[sdb3/sdc3/sdd3/sde3]
zone-offset= 0KB, device-offset= 0KB, size= 41940992KB
md126: detected capacity change from 0 to 42947575808
md126: unknown partition table
md: md125 stopped.
md: bind
md: bind
md: bind
md: bind
md/raid0:md125: md_size is 33550336 sectors.
md: RAID0 configuration for md125 - 1 zone
md: zone0=[sdb2/sdc2/sdd2/sde2]
zone-offset= 0KB, device-offset= 0KB, size= 16775168KB
md125: detected capacity change from 0 to 17177772032
md125: unknown partition table
md: md124 stopped.
md: bind
md: bind
md: bind
md: bind
md/raid0:md124: md_size is 125825024 sectors.
md: RAID0 configuration for md124 - 1 zone
md: zone0=[sdb1/sdc1/sdd1/sde1]
zone-offset= 0KB, device-offset= 0KB, size= 62912512KB
md124: detected capacity change from 0 to 64422412288
md124: unknown partition table
bio: create slab at 2
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
SPL: Loaded module v0.6.3-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.3-1, ZFS pool version 5000, ZFS filesystem version 5
EXT4-fs (md126): re-mounted. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[1819]: starting version 215
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
input: PC Speaker as /devices/platform/pcspkr/input/input10
AMD64 EDAC driver v3.4.0
microcode: CPU0: patch_level=0x06000822
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 78 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input12
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 79 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc900165f4000, c0:4a:00:02:14:57, XID 0c200000 IRQ 79
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 80 for MSI/MSI-X
r8169 0000:05:00.0 eth1: RTL8168e/8111e at 0xffffc900165f6000, c0:4a:00:02:05:3e, XID 0c200000 IRQ 80
r8169 0000:05:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0: irq 81 for MSI/MSI-X
r8169 0000:06:00.0 eth2: RTL8168e/8111e at 0xffffc900166b0000, c0:4a:00:02:14:a7, XID 0c200000 IRQ 81
r8169 0000:06:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:07:00.0: irq 82 for MSI/MSI-X
r8169 0000:07:00.0 eth3: RTL8168e/8111e at 0xffffc900166b2000, c0:4a:00:02:38:3a, XID 0c200000 IRQ 82
r8169 0000:07:00.0 eth3: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:09:00.0: irq 83 for MSI/MSI-X
r8169 0000:09:00.0 eth4: RTL8168evl/8111evl at 0xffffc900166b4000, 74:d4:35:85:a8:a2, XID 0c900800 IRQ 83
r8169 0000:09:00.0 eth4: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0c:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:0c:00.0: irq 84 for MSI/MSI-X
r8169 0000:0c:00.0 eth5: RTL8168e/8111e at 0xffffc900166b6000, c0:4a:00:02:23:84, XID 0c200000 IRQ 84
r8169 0000:0c:00.0 eth5: jumbo features [frames: 9200 bytes, tx checksumming: ko]
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90016b5cb00). heartbeat=60 sec (nowayout=0)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
systemd-udevd[1832]: renamed network interface eth0 to enp2s0
systemd-udevd[1858]: renamed network interface eth1 to enp5s0
systemd-udevd[1848]: renamed network interface eth3 to enp7s0
systemd-udevd[1841]: renamed network interface eth4 to enp9s0
systemd-udevd[1844]: renamed network interface eth2 to enp6s0
Adding 16775164k swap on /dev/md125. Priority:-1 extents:1 across:16775164k FS
systemd-udevd[1847]: renamed network interface eth5 to enp12s0
EXT4-fs (md124): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[1689]: Received request to flush runtime journal from PID 1
r8169 0000:0c:00.0 enp12s0: link down
r8169 0000:0c:00.0 enp12s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
r8169 0000:0c:00.0 enp12s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp12s0: link becomes ready
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=enp12s0 OUT= MAC=01:00:5e:00:00:01:c0:4a:00:e4:55:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
NTFS driver 2.1.30 [Flags: R/W MODULE].
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts: (null)
SQUASHFS error: Can't find a SQUASHFS superblock on sda2
FAT-fs (sda2): bogus number of reserved sectors
FAT-fs (sda2): Can't find a valid FAT filesystem
FAT-fs (sda2): bogus number of reserved sectors
FAT-fs (sda2): Can't find a valid FAT filesystem
isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
attempt to access beyond end of device
sda2: rw=0, want=3, limit=2
hfsplus: unable to find HFS+ superblock
VFS: unable to find oldfs superblock on device sda2
VFS: could not find a valid V7 on sda2.
HPFS: hpfs_map_sector: read error
You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING>WARNING>WARNING