dmesg - sss5
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000adde4000 (usable)
BIOS-e820: 00000000adde4000 - 00000000addee000 (ACPI data)
BIOS-e820: 00000000addee000 - 00000000bc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000547fff000 (usable)
DMI 2.8 present.
SMBIOS version 2.8 @ 0xF4F40
DMI: HP ProLiant DL320e Gen8 v2, BIOS P80 03/28/2014
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x547fff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00B8000000 mask 7FF8000000 uncachable
1 base 00C0000000 mask 7FC0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xadde4 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000adde4000
0000000000 - 0080000000 page 1G
0080000000 - 00adc00000 page 2M
00adc00000 - 00adde4000 page 4k
kernel direct mapping tables up to adde4000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000547fff000
0100000000 - 0540000000 page 1G
0540000000 - 0547e00000 page 2M
0547e00000 - 0547fff000 page 4k
kernel direct mapping tables up to 547fff000 @ a000-d000
RAMDISK: 36e77000 - 37fef637
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000adde6400 000B4 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000adde6540 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI: DSDT 00000000adde6640 025CE (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000adde4140 00040
ACPI: SPCR 00000000adde4180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000adde4200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000adde4240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000adde4280 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000adde4300 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000adde4340 00230 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000adde4580 00252 (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 00000000adde4800 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000adde4980 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000adde49c0 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000adde4a80 00470 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000adde63c0 0002D (v01 HP ProLiant 00000001 00000000)
ACPI: SSDT 00000000adde8c40 00137 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000adde8d80 002CB (v03 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 00000000adde9080 001E1 (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 00000000adde9280 00377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000adde9600 009E4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000547fff000
Bootmem setup node 0 0000000000000000-0000000547fff000
NODE_DATA [000000000000c000 - 000000000003ffff]
bootmap [0000000000100000 - 00000000001a8fff] pages a9
(8 early reservations) ==> bootmem [0000000000 - 0547fff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [0036e77000 - 0037fef637] RAMDISK ==> [0036e77000 - 0037fef637]
#4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
#5 [0002020000 - 0002020302] BRK ==> [0002020000 - 0002020302]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 21631MB)
[ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea000f800000-ffffea00127fffff] PMD -> [ffff880038000000-ffff88003affffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00547fff
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009b
0: 0x00000100 -> 0x000adde4
0: 0x00100000 -> 0x00547fff
On node 0 totalpages: 5201277
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3831 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 693788 pages, LIFO batch:31
Normal zone: 61376 pages used for memmap
Normal zone: 4427839 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 64 CPUs, 60 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000adde4000 - 00000000addee000
PM: Registered nosave memory: 00000000addee000 - 00000000bc000000
PM: Registered nosave memory: 00000000bc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at bc000000 (gap: bc000000:42c00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88003b000000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 5125458
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 20278376k/22151164k available (5325k kernel code, 1346056k absent, 526732k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:920
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83361792 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3092.624 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.24 BogoMIPS (lpj=3092624)
pid_max: default: 65536 minimum: 512
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000b5ffd000 end: 0x000000b5ffffff
dmar: RMRR base: 0x000000b5ff6000 end: 0x000000b5ffcfff
dmar: RMRR base: 0x000000b5f93000 end: 0x000000b5f94fff
dmar: RMRR base: 0x000000b5f8f000 end: 0x000000b5f92fff
dmar: RMRR base: 0x000000b5f7f000 end: 0x000000b5f8efff
dmar: RMRR base: 0x000000b1f7f000 end: 0x000000b5f7efff
dmar: RMRR base: 0x000000adf7f000 end: 0x000000b1f7efff
dmar: RMRR base: 0x000000adf7e000 end: 0x000000adf7efff
dmar: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
dmar: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
dmar: RMRR base: 0x000000addee000 end: 0x000000addeefff
dmar: RMRR base: 0x000000c0000000 end: 0x000000dfffffff
dmar: No ATSR found
IOAPIC id 8 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Your BIOS has requested that x2apic be disabled.
This will leave your machine vulnerable to irq-injection attacks.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E3-1220 v3 @ 3.10GHz stepping 03
Performance Events: no PEBS fmt2+, generic architected perfmon, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (24740.99 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base b8000000 segment 0 buses 0 - 63
PCI: MCFG area at b8000000 reserved in E820
PCI: Using MMCONFIG at b8000000 - bbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0e])
pci_root PNP0A08:00: host bridge window [mem 0xbc000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfbffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0xfacf0000-0xfacfffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xface0000-0xface03ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfacd0000-0xfacd03ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x1000-0x1007]
pci 0000:00:1f.2: reg 14: [io 0x1008-0x100b]
pci 0000:00:1f.2: reg 18: [io 0x1010-0x1017]
pci 0000:00:1f.2: reg 1c: [io 0x1018-0x101b]
pci 0000:00:1f.2: reg 20: [io 0x1020-0x103f]
pci 0000:00:1f.2: reg 24: [mem 0xfacc0000-0xfacc07ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:01.1: PCI bridge to [bus 07-07]
pci 0000:00:01.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfbff0000-0xfbff7fff 64bit]
pci 0000:00:01.2: PCI bridge to [bus 02-02]
pci 0000:00:01.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.2: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:01.2: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xfabf0000-0xfabfffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfabe0000-0xfabeffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfabd0000-0xfabdffff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [mem 0xfabc0000-0xfabcffff 64bit pref]
pci 0000:03:00.1: reg 18: [mem 0xfabb0000-0xfabbffff 64bit pref]
pci 0000:03:00.1: reg 20: [mem 0xfaba0000-0xfabaffff 64bit pref]
pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 14: [mem 0xfbef0000-0xfbef01ff]
pci 0000:01:00.0: reg 18: [io 0x3400-0x34ff]
pci 0000:01:00.1: reg 10: [mem 0xbf000000-0xbfffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xfbee0000-0xfbee3fff]
pci 0000:01:00.1: reg 18: [mem 0xfb000000-0xfb7fffff]
pci 0000:01:00.2: reg 10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 14: [mem 0xfaff0000-0xfaff00ff]
pci 0000:01:00.2: reg 18: [mem 0xfae00000-0xfaefffff]
pci 0000:01:00.2: reg 1c: [mem 0xfad80000-0xfadfffff]
pci 0000:01:00.2: reg 20: [mem 0xfad70000-0xfad77fff]
pci 0000:01:00.2: reg 24: [mem 0xfad60000-0xfad67fff]
pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.4: reg 20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff]
pci 0000:00:1c.7: bridge window [mem 0xbf000000-0xbfffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 25 for MSI
hpet: hpet3 irq 26 for MSI
hpet: hpet4 irq 27 for MSI
hpet: hpet5 irq 28 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0310-0x0313]
pnp 00:01: [io 0x0316-0x0317]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0880-0x08ff]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0cd0-0x0cd3]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0ca0-0x0ca1]
pnp 00:01: [io 0x0ca4-0x0ca5]
pnp 00:01: [mem 0xb8000000-0xbbffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfed90000-0xfed91fff]
pnp 00:01: [mem 0xfed90000-0xfed91fff]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0310-0x0313] has been reserved
system 00:01: [io 0x0316-0x0317] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0cd0-0x0cd3] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xb8000000-0xbbffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed91fff] could not be reserved
system 00:01: [mem 0xfed90000-0xfed91fff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.5: BAR 14: assigned [mem 0xbc000000-0xbc0fffff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc400000-0xbc5fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc600000-0xbc7fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:01.1: PCI bridge to [bus 07-07]
pci 0000:00:01.1: PCI bridge to [bus 07-07]
pci 0000:00:01.1: bridge window [io disabled]
pci 0000:00:01.1: bridge window [mem disabled]
pci 0000:00:01.1: bridge window [mem pref disabled]
pci 0000:00:01.2: PCI bridge to [bus 02-02]
pci 0000:00:01.2: PCI bridge to [bus 02-02]
pci 0000:00:01.2: bridge window [io disabled]
pci 0000:00:01.2: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:01.2: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xbc400000-0xbc5fffff]
pci 0000:00:1c.0: bridge window [mem 0xbc600000-0xbc7fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfab00000-0xfab1ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xfab20000-0xfab3ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xbc000000-0xbc3fffff]
pci 0000:00:1c.5: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: PCI bridge to [bus 01-01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff]
pci 0000:00:1c.7: bridge window [mem 0xbf000000-0xbfffffff 64bit pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.2: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xbc000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0a: resource 1 [mem 0xbc400000-0xbc5fffff]
pci_bus 0000:0a: resource 2 [mem 0xbc600000-0xbc7fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbc3fffff]
pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xbf000000-0xbfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.1: Boot video device
pci 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17889k freed
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
dmar: Device scope device [0000:00:01.02] not found
dmar: Device scope device [0000:00:1f.05] not found
audit: initializing netlink socket (disabled)
type=2000 audit(1423241022.312:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 8A44323FB303E068
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.1: irq 31 for MSI/MSI-X
pcieport 0000:00:01.2: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.2: irq 32 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si 00:02: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 21, io mem 0xface0000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xfacd0000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:01:00.4: setting latency timer to 64
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2015-02-06 16:43:43 UTC (1423241023)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-335.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
hpvsa: module license 'HP' taints kernel.
Disabling lock debugging due to kernel taint
hpvsac 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hpvsac 0000:02:00.0: setting latency timer to 64
hpvsa_cache_pci_init: Using 64bit DMA
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpvsac 0000:02:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpvsac 0000:02:00.0: irq 34 for MSI/MSI-X
hpvsa_pci_init: Initialized cache controller
hpvsa 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hpvsa 0000:00:1f.2: setting latency timer to 64
hpvsa: subsystem vendor id[1590]
hpvsa: subsystem device[84]
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpvsa 0000:00:1f.2: irq 35 for MSI/MSI-X
hpvsa_pci_init: Using 64bit DMA
hpvsa: Write Cache: 64bit memory BAR
Date: format(24) 2015/02/06 16:43:43 UTC
OS_thread_create: Pinning [PARSE] task to CPU 0
OS_thread_create: Pinning [FLUSH] task to CPU 0
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 3092.837 MHz.
Switching to clocksource tsc
set_config_data: max_commands: 1024
maxsgentries 32
scsi0 : hpvsa
hpvsa - driver version:1.2.8-160
hpvsa - raidstack version:4.50C
hpvsa0: Found 1 scsi device(s)
hpvsa: Number of DVDs found 0
hpvsa0: Disk found[type=0]
hpvsa0: Controller found[type=12]
hpvsa0: Direct-Access device added (b0t0l0).
hpvsa0: Controller device added (b1t0l0).
scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 4.50 PQ: 0 ANSI: 5
hpvsa0: shost[ffff8805394cb000] added b0t0l0
scsi 0:1:0:0: RAID HP B120i 4.50 PQ: 0 ANSI: 5
hpvsa0: shost[ffff8805394cb000] added b1t0l0
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:00:14.0: irq 36 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5
usb usb5: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:00:14.0
usb usb5: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 1953459632 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
usb 4-3: new high speed USB device number 2 using xhci_hcd
usb 4-3: New USB device found, idVendor=0424, idProduct=2660
usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 2 ports detected
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1423241034.146:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
usb 4-5: new low speed USB device number 3 using xhci_hcd
usb 4-5: New USB device found, idVendor=04b3, idProduct=3025
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB NetVista Full Width Keyboard.
usb 4-5: Manufacturer: LITE-ON Technology
usb 4-5: configuration #1 chosen from 1 choice
usb 4-5: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb4/4-5/4-5:1.0/input/input2
generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-5/input0
dracut: Switching root
usb 4-6: new low speed USB device number 4 using xhci_hcd
usb 4-6: New USB device found, idVendor=046d, idProduct=c05a
usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-6: Product: USB Optical Mouse
usb 4-6: Manufacturer: Logitech
usb 4-6: configuration #1 chosen from 1 choice
usb 4-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb4/4-6/4-6:1.0/input/input3
generic-usb 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: resource (null) [io 0x0928-0x092f] conflicts with ACPI region SGPE [io 0x920-0x92f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:1:0:0: Attached scsi generic sg1 type 12
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.132 (May 21, 2013)
tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 64:51:06:0e:0f:ec
tg3 0000:03:00.0: eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
tg3 0000:03:00.1: setting latency timer to 64
tg3 0000:03:00.1: eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 64:51:06:0e:0f:ed
tg3 0000:03:00.1: eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
hpwdt 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.2-rh, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:00.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
hpilo 0000:01:00.2: setting latency timer to 64
power_meter ACPI000D:00: Found ACPI power meter.
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
platform microcode: firmware: requesting intel-ucode/06-3c-03
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Adding 16777208k swap on /dev/sda3. Priority:-1 extents:1 across:16777208k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.0: irq 41 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:03:00.0: eth0: EEE is enabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1064 MHz, 3100 MHz
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:00.1: irq 46 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
eth0: no IPv6 routers present
fuse init (API version 7.13)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff88053f4f6588), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)