dmesg - 3.18.1-ext73-33.1-i7
CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
Initializing cgroup subsys cpu
Linux version 3.18.1-ext73-33.1-i7 (root@ext73-kernel) (gcc version 4.9.3 20141231 (prerelease) (eXt73-build_v1.5) ) #23 SMP PREEMPT Fri Jan 2 22:14:42 CET 2015
KERNEL supported cpus:
Intel GenuineIntel
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd461fff] usable
BIOS-e820: [mem 0x00000000dd462000-0x00000000dd7bafff] reserved
BIOS-e820: [mem 0x00000000dd7bb000-0x00000000dd7cbfff] ACPI data
BIOS-e820: [mem 0x00000000dd7cc000-0x00000000dd8effff] ACPI NVS
BIOS-e820: [mem 0x00000000dd8f0000-0x00000000de7cafff] reserved
BIOS-e820: [mem 0x00000000de7cb000-0x00000000de7cbfff] usable
BIOS-e820: [mem 0x00000000de7cc000-0x00000000de80efff] ACPI NVS
BIOS-e820: [mem 0x00000000de80f000-0x00000000dec4afff] usable
BIOS-e820: [mem 0x00000000dec4b000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V, BIOS 2104 08/13/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff8800000fd8c0]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02054000, 0x02054fff] PGTABLE
BRK [0x02055000, 0x02055fff] PGTABLE
BRK [0x02056000, 0x02056fff] PGTABLE
init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[mem 0x21ee00000-0x21effffff] page 2M
BRK [0x02057000, 0x02057fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[mem 0x21c000000-0x21edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd461fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdd3fffff] page 2M
[mem 0xdd400000-0xdd461fff] page 4k
init_memory_mapping: [mem 0xde7cb000-0xde7cbfff]
[mem 0xde7cb000-0xde7cbfff] page 4k
BRK [0x02058000, 0x02058fff] PGTABLE
init_memory_mapping: [mem 0xde80f000-0xdec4afff]
[mem 0xde80f000-0xde9fffff] page 4k
[mem 0xdea00000-0xdebfffff] page 2M
[mem 0xdec00000-0xdec4afff] page 4k
BRK [0x02059000, 0x02059fff] PGTABLE
init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[mem 0xdeff4000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x34c3a000-0x36614fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD7BE080 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD7C9820 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DD7BE188 00B693 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000DD8EE080 000040
ACPI: APIC 0x00000000DD7C9930 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD7C99A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DD7C99F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD7C9A30 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD7C9A68 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: BGRT 0x00000000DD7CB2F8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DD7C9E30 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD7CA7E0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000DD7CB278 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
cma: Reserved 16 MiB at 0x000000021dc00000
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215400000-ffff88021d3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdd461fff]
node 0: [mem 0xde7cb000-0xde7cbfff]
node 0: [mem 0xde80f000-0xdec4afff]
node 0: [mem 0xdeff4000-0xdeffffff]
node 0: [mem 0x100000000-0x21effffff]
Initmem setup node 0 [mem 0x00001000-0x21effffff]
On node 0 totalpages: 2082887
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14115 pages used for memmap
DMA32 zone: 903339 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd462000-0xdd7bafff]
PM: Registered nosave memory: [mem 0xdd7bb000-0xdd7cbfff]
PM: Registered nosave memory: [mem 0xdd7cc000-0xdd8effff]
PM: Registered nosave memory: [mem 0xdd8f0000-0xde7cafff]
PM: Registered nosave memory: [mem 0xde7cc000-0xde80efff]
PM: Registered nosave memory: [mem 0xdec4b000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s74112 r8192 d32384 u524288
pcpu-alloc: s74112 r8192 d32384 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050319
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 8061800K/8331548K available (9859K kernel code, 588K rwdata, 2164K rodata, 860K init, 880K bss, 269748K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=2, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:456 0
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.979 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.95 BogoMIPS (lpj=6799958)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 40K (ffffffff81f6c000 - ffffffff81f76000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
#2CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
#3
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27199.83 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdd7cc000-0xdd8effff] (1196032 bytes)
PM: Registering ACPI NVS region [mem 0xde7cc000-0xde80efff] (274432 bytes)
xor: automatically using best checksumming function:
avx : 24004.000 MB/sec
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
raid6: sse2x1 9355 MB/s
raid6: sse2x2 11646 MB/s
raid6: sse2x4 13597 MB/s
raid6: using algorithm sse2x4 (13597 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Deleted _OSI(Windows 2012)
ACPI: Added _OSI(Linux)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880212B61000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880212B0EC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880212B0BA00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7420000-0xf742ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf743b000-0xf743b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7400000-0xf741ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7439000-0xf7439fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7438000-0xf74383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7430000-0xf7433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7437000-0xf74373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7436000-0xf74367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7435000-0xf74350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1184] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x24: [mem 0xf7300000-0xf73001ff]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:06:00.0: [168c:0032] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf727ffff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0xf7280000-0xf728ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd462000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7cc000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec4b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xe0100000-0xe02fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe02fffff]
pci 0000:00:1c.0: bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 04-05]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff]
pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 26476K (ffff880034c3a000 - ffff880036615000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9462000-0xdd462000] (64MB) mapped at [ffff8800d9462000-ffff8800dd461fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1423222319.627:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
msgmni has been set to 15829
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x7e9000 bytes, mapped to 0xffffc90004100000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
serial 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3d impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436100 irq 25
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436200 irq 25
ata4: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436280 irq 25
ata5: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xf7436000 port 0xf7436380 irq 25
ahci 0000:03:00.0: irq 26 for MSI/MSI-X
ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300100 irq 26
ata8: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300180 irq 26
libphy: Fixed MDIO Bus: probed
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 27 for MSI/MSI-X
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.0: irq 28 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 29 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 30 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 31 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 32 for MSI/MSI-X
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7438000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7437000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Key type dns_resolver registered
Loading compiled-in X.509 certificates
registered taskstats version 1
Btrfs loaded
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:02: setting system clock to 2015-02-06 11:32:00 UTC (1423222320)
ALSA device list:
No soundcards found.
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880214c37f28), AE_NOT_FOUND (20140926/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880214c37dc0), AE_NOT_FOUND (20140926/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880214c37cd0), AE_NOT_FOUND (20140926/psparse-536)
ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-9: WDC WD10EFRX-68PJCN0, 82.00A82, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880214c37cd0), AE_NOT_FOUND (20140926/psparse-536)
ata1.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880214c37f28), AE_NOT_FOUND (20140926/psparse-536)
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880214c37e38), AE_NOT_FOUND (20140926/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880214c37dc0), AE_NOT_FOUND (20140926/psparse-536)
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
ata4.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880214c37eb0), AE_NOT_FOUND (20140926/psparse-536)
ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880214c37e38), AE_NOT_FOUND (20140926/psparse-536)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg2 type 0
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff880214c37eb0), AE_NOT_FOUND (20140926/psparse-536)
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
scsi 4:0:0:0: Attached scsi generic sg3 type 5
scsi 5:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 0A82 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: Attached scsi generic sg4 type 0
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > sdc3 sdc4
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 1-3: new full-speed USB device number 2 using xhci_hcd
usb 5-1: new high-speed USB device number 2 using ehci-pci
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new high-speed USB device number 2 using xhci_hcd
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
usb 5-1.1: new full-speed USB device number 3 using ehci-pci
usb 5-1.5: new low-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 3400.023 MHz
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 860K (ffffffff81e95000 - ffffffff81f6c000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 368K (ffff8800019a4000 - ffff880001a00000)
Freeing unused kernel memory: 1932K (ffff880001c1d000 - ffff880001e00000)
systemd-udevd[158]: starting version 204
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
input: Harman Multimedia JBL Pebbles as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:05FC:0231.0001/input/input5
hid-generic 0003:05FC:0231.0001: input,hidraw0: USB HID v1.00 Device [Harman Multimedia JBL Pebbles] on usb-0000:00:14.0-3/input2
usb 5-1.6: new full-speed USB device number 5 using ehci-pci
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.0/0003:1C4F:0026.0002/input/input6
hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.5/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.5/5-1.5:1.1/0003:1C4F:0026.0003/input/input7
hid-generic 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.5/input1
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
input: A..... G4 as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:E0FF:0002.0004/input/input8
hid-generic 0003:E0FF:0002.0004: input,hidraw3: USB HID v1.00 Mouse [A..... G4] on usb-0000:00:1a.0-1.6/input0
input: A..... G4 as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:E0FF:0002.0005/input/input9
hid-generic 0003:E0FF:0002.0005: input,hiddev0,hidraw4: USB HID v1.00 Keyboard [A..... G4] on usb-0000:00:1a.0-1.6/input1
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:df:21:5f
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Switched to clocksource tsc
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 71 bits of entropy available
systemd-udevd[370]: starting version 204
nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140926/utaddress-258)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140926/utaddress-258)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140926/utaddress-258)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140926/utaddress-258)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
usbcore: registered new interface driver btusb
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[drm] Initialized drm 1.1.0 20060810
random: nonblocking pool is initialized
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1b.0: irq 34 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
device-mapper: multipath: version 1.7.0 loaded
sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
ath: phy0: Disable PLL PowerSave
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90006200000, irq=18
asus_wmi: ASUS WMI generic driver loaded
usb 3-1: Warning! Unlikely big volume range (=5632), cval->res is probably wrong.
usb 3-1: [2] FU [Mic Capture Volume] ch = 1, val = -5632/0/1
uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088)
usbcore: registered new interface driver snd-usb-audio
input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb3/3-1/3-1:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input23
asus_wmi: Disabling ACPI video driver
gpio_ich: GPIO from 436 to 511 on gpio_ich
EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1423218735.907:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=553 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
audit: type=1400 audit(1423218735.907:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.35 Sat Jan 10 21:27:15 PST 2015
init: failsafe main process (750) killed by TERM signal
init: apport pre-start process (983) terminated with status 1
init: apport post-stop process (1105) terminated with status 1
init: cups main process (1090) killed by HUP signal
init: cups main process ended, respawning
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
e1000e 0000:00:19.0: irq 33 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: samba-ad-dc main process (1261) terminated with status 1
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
nvidia 0000:01:00.0: irq 35 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1414 at drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x20c/0x220 [drm]()
No drm_driver.set_busid() implementation provided by nvidia_frontend_exit_module [nvidia]. Use drm_dev_set_unique() to set the unique name explicitly.
Modules linked in: binfmt_misc nvidia(PO) gpio_ich eeepc_wmi asus_wmi mxm_wmi sparse_keymap kvm_intel kvm ath9k ath9k_common ath9k_hw uvcvideo ath snd_hda_codec_hdmi snd_hda_codec_realtek snd_usb_audio mac80211 videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hda_codec_generic dm_multipath snd_usbmidi_lib snd_seq_midi snd_seq_midi_event v4l2_common cfg80211 snd_seq videodev snd_hda_intel crct10dif_pclmul snd_hda_controller crc32_pclmul ghash_clmulni_intel scsi_dh snd_rawmidi snd_seq_device aesni_intel snd_hda_codec aes_x86_64 lrw snd_hwdep gf128mul glue_helper snd_pcm ablk_helper drm cryptd snd_timer i2c_i801 btusb lpc_ich 8250_fintek tpm_infineon tpm_tis tpm mac_hid nct6775 hwmon_vid coretemp sr_mod cdrom hid_generic e1000e ptp video
CPU: 1 PID: 1414 Comm: Xorg Tainted: P O 3.18.1-ext73-33.1-i7 #23
Hardware name: System manufacturer System Product Name/P8Z77-V, BIOS 2104 08/13/2013
0000000000000000 000000000000008f ffffffff819924fb ffffffffc0427977
ffffffff81057fd5 ffffffffc0429038 ffff880000000020 ffff8800d8a53da8
ffff8800d8a53d58 ffff88021228b600 ffff88021228b600 ffff8800d92f5000
Call Trace:
[] ? dump_stack+0x49/0x6a
[] ? warn_slowpath_fmt+0x95/0x110
[] ? drm_setversion+0x20c/0x220 [drm]
[] ? drm_ioctl+0x2c6/0x580 [drm]
[] ? drm_noop+0x30/0x30 [drm]
[] ? do_filp_open+0x2b/0x90
[] ? do_vfs_ioctl+0x29a/0x520
[] ? fd_install+0x2b/0x70
[] ? SyS_open+0x18d/0x350
[] ? SyS_ioctl+0x79/0x90
[] ? system_call_fastpath+0x16/0x1b
---[ end trace 8eea95df468d2776 ]---
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1414 at drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x20c/0x220 [drm]()
No drm_driver.set_busid() implementation provided by nvidia_frontend_exit_module [nvidia]. Use drm_dev_set_unique() to set the unique name explicitly.
Modules linked in: binfmt_misc nvidia(PO) gpio_ich eeepc_wmi asus_wmi mxm_wmi sparse_keymap kvm_intel kvm ath9k ath9k_common ath9k_hw uvcvideo ath snd_hda_codec_hdmi snd_hda_codec_realtek snd_usb_audio mac80211 videobuf2_vmalloc videobuf2_memops videobuf2_core snd_hda_codec_generic dm_multipath snd_usbmidi_lib snd_seq_midi snd_seq_midi_event v4l2_common cfg80211 snd_seq videodev snd_hda_intel crct10dif_pclmul snd_hda_controller crc32_pclmul ghash_clmulni_intel scsi_dh snd_rawmidi snd_seq_device aesni_intel snd_hda_codec aes_x86_64 lrw snd_hwdep gf128mul glue_helper snd_pcm ablk_helper drm cryptd snd_timer i2c_i801 btusb lpc_ich 8250_fintek tpm_infineon tpm_tis tpm mac_hid nct6775 hwmon_vid coretemp sr_mod cdrom hid_generic e1000e ptp video
CPU: 1 PID: 1414 Comm: Xorg Tainted: P W O 3.18.1-ext73-33.1-i7 #23
Hardware name: System manufacturer System Product Name/P8Z77-V, BIOS 2104 08/13/2013
0000000000000000 000000000000008f ffffffff819924fb ffffffffc0427977
ffffffff81057fd5 ffffffffc0429038 ffff880000000020 ffff8800d8a53da8
ffff8800d8a53d58 ffff88021228b600 ffff88021228b600 ffff8800d92f5000
Call Trace:
[] ? dump_stack+0x49/0x6a
[] ? warn_slowpath_fmt+0x95/0x110
[] ? drm_setversion+0x20c/0x220 [drm]
[] ? drm_ioctl+0x2c6/0x580 [drm]
[] ? drm_noop+0x30/0x30 [drm]
[] ? do_filp_open+0x2b/0x90
[] ? do_vfs_ioctl+0x29a/0x520
[] ? fd_install+0x2b/0x70
[] ? SyS_open+0x18d/0x350
[] ? SyS_ioctl+0x79/0x90
[] ? system_call_fastpath+0x16/0x1b
---[ end trace 8eea95df468d2777 ]---
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1575) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
audit_printk_skb: 114 callbacks suppressed
audit: type=1400 audit(1423218770.337:50): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2311 comm="apparmor_parser"
audit: type=1400 audit(1423218770.337:51): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2311 comm="apparmor_parser"
audit: type=1400 audit(1423218770.337:52): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2311 comm="apparmor_parser"
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.31 [Flags: R/O MODULE].