dmesg - prueba_procesador
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-44-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:23:46 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable
BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb63efff] usable
BIOS-e820: [mem 0x00000000bb63f000-0x00000000bb6befff] reserved
BIOS-e820: [mem 0x00000000bb6bf000-0x00000000bb7befff] ACPI NVS
BIOS-e820: [mem 0x00000000bb7bf000-0x00000000bb7fefff] ACPI data
BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP 630 Notebook PC /3674, BIOS F.38 12/17/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x138000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-through
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0FFE00000 mask FFFE00000 write-protect
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB800000 mask FFF800000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 138000000 mask FF8000000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0098000] 98000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b96000, 0x01b96fff] PGTABLE
RAMDISK: [mem 0x34d86000-0x366bafff]
ACPI: RSDP 000fe020 000024 (v02 HPQOEM)
ACPI: XSDT bb7fe120 000074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP bb7fc000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT bb7eb000 00D8E0 (v02 HP INSYDE 00000001 MSFT 01000013)
ACPI: FACS bb76d000 000040
ACPI: ASF! bb7fd000 0000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
ACPI: HPET bb7fb000 000038 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: APIC bb7fa000 00008C (v02 HP INSYDE 00000001 MSFT 01000013)
ACPI: MCFG bb7f9000 00003C (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: SLIC bb7ea000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: BOOT bb7e6000 000028 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: ASPT bb7e3000 000034 (v04 HP INSYDE 00000001 MSFT 01000013)
ACPI: WDAT bb7e2000 000224 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: SSDT bb7e1000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
4100MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b97000, 0x01b97fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x37ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xbb63efff]
node 0: [mem 0xbb7ff000-0xbb7fffff]
node 0: [mem 0x00000000-0x37ffffff]
On node 0 totalpages: 996827
free_area_init_node: node 0, pgdat c199d580, node_mem_map f2686020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3995 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 8201 pages used for memmap
HighMem zone: 768578 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7b7c000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995043
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10223608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00138000)
Memory: 3898308K/3987308K available (6547K kernel code, 640K rwdata, 2764K rodata, 876K init, 924K bss, 89000K reserved, 3074312K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19bb000 - 0xc1a96000 ( 876 kB)
.data : 0xc1664ff4 - 0xc19ba3c0 (3412 kB)
.text : 0xc1000000 - 0xc1664ff4 (6547 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f6c0a000 soft=f6c0c000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2526.981 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.96 BogoMIPS (lpj=10107924)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a96000 - c1a9e000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27841 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU 1 irqstacks, hard=f6d48000 soft=f6d4a000
x86: Booting SMP configuration:
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
CPU 2 irqstacks, hard=f6e20000 soft=f6e22000
Initializing CPU#2
CPU2: Thermal monitoring handled by SMI
#2
CPU 3 irqstacks, hard=f6e66000 soft=f6e68000
Initializing CPU#3
CPU3: Thermal monitoring handled by SMI
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20215.84 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbb6bf000-0xbb7befff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 9:50:38, date: 02/01/15
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT bb691a18 000474 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000474 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT bb68f018 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT bb690a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT bb68ed98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: Disabling batched IOTLB flush on Ironlake
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4050-0x4057]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd6404000-0xd640400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd640a000-0xd640a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd6400000-0xd6403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd6409000-0xd64093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f]
pci 0000:00:1f.2: reg 0x14: [io 0x405c-0x405f]
pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
pci 0000:00:1f.2: reg 0x1c: [io 0x4058-0x405b]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd6408000-0xd64087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd6406000-0xd64060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xd0404000-0xd0404fff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd4400000-0xd440ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xd4400000-0xd53fffff]
pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xd3400000-0xd3400fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd3400000-0xd43fffff]
pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:ff: on NUMA node 0
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.CPBG: notify handler is installed
Found 2 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb63f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0x0810-0x0813] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] could not be reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xd6500000-0xd6500fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd63fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xd4400000-0xd53fffff]
pci 0000:00:1c.2: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd3400000-0xd43fffff]
pci 0000:00:1c.4: bridge window [mem 0xd2400000-0xd33fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xd5400000-0xd63fffff]
pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd53fffff]
pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xd3400000-0xd43fffff]
pci_bus 0000:03: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25812K (f4d86000 - f66bb000)
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1422784240.704:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1659
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TSZ0] (20 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TSZ1] (23 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd640a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd6409000
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery absent)
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 221a5ee8b665d05558a1dee8e31bf16eb8df8fd8'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:788:827
rtc_cmos 00:05: setting system clock to 2015-02-01 09:50:41 UTC (1422784241)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
Write protecting the kernel text: 6548k
Write protecting the kernel read-only data: 2772k
NX-protecting the kernel data: 5740k
usb 1-1: new high-speed USB device number 2 using ehci-pci
systemd-udevd[108]: starting version 204
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.0: irq 40 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xf8418000, ec:9a:74:fb:ca:7d, XID 0c200000 IRQ 40
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
rtsx_pci 0000:03:00.0: irq 41 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd6408000 port 0xd6408100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xd6408000 port 0xd6408180 irq 42
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
fbcon: inteldrmfb (fb0) is primary device
usb 2-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 2526.999 MHz
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA50A, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 JE3O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
ata2.00: ATAPI: hp CDDVDW SN-208BB, HH01, max UDMA/100
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208BB HH01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.3: New USB device found, idVendor=05c8, idProduct=021e
usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.3: Product: HP Webcam-101
usb 1-1.3: Manufacturer: HP Webcam-101
usb 1-1.3: SerialNumber: HP Webcam-101
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
usb 1-1.4: New USB device found, idVendor=03f0, idProduct=311d
usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 2-1.1: New USB device found, idVendor=093a, idProduct=2510
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB OPTICAL MOUSE
usb 2-1.1: Manufacturer: PIXART
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
hidraw: raw HID events driver (C) Jiri Kosina
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.1/input0
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 706145
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
random: nonblocking pool is initialized
Switched to clocksource tsc
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Adding 4192252k swap on /dev/sda9. Priority:-1 extents:1 across:4192252k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[317]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input8
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
kvm: disabled by bios
type=1400 audit(1422784261.235:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=399 comm="apparmor_parser"
type=1400 audit(1422784261.235:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
type=1400 audit(1422784261.235:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1422784261.235:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
type=1400 audit(1422784261.235:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
type=1400 audit(1422784261.239:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
SKU: Nid=0x1d sku_cfg=0x40179a2d
SKU: port_connectivity=0x1
ath: phy0: ASPM enabled: 0x43
SKU: enable_pcbeep=0x1
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
SKU: check_sum=0x00000007
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
SKU: customization=0x0000009a
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x18
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0270
WARNING! power/level is deprecated; use power/control instead
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf87a0000, irq=18
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
input: HP WMI hotkeys as /devices/virtual/input/input12
ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20131115/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f6c384b0), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f6c389a8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20131115/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f6c384b0), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f6c389a8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver ath3k
usb 1-1.4: USB disconnect, device number 4
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-1.4: new full-speed USB device number 5 using ehci-pci
usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20131115/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f6c384b0), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f6c389a8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20131115/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f6c384b0), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f6c389a8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
init: failsafe main process (778) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1422784266.659:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=880 comm="apparmor_parser"
type=1400 audit(1422784266.659:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=880 comm="apparmor_parser"
type=1400 audit(1422784266.659:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=880 comm="apparmor_parser"
type=1400 audit(1422784266.995:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=931 comm="apparmor_parser"
type=1400 audit(1422784266.999:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=932 comm="apparmor_parser"
type=1400 audit(1422784266.999:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=932 comm="apparmor_parser"
type=1400 audit(1422784266.999:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=932 comm="apparmor_parser"
type=1400 audit(1422784266.999:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=933 comm="apparmor_parser"
type=1400 audit(1422784266.999:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=933 comm="apparmor_parser"
type=1400 audit(1422784266.999:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=933 comm="apparmor_parser"
init: cups main process (881) killed by HUP signal
init: cups main process ended, respawning
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
init: gdm main process (1091) killed by TERM signal
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: samba-ad-dc main process (1170) terminated with status 1
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x26e offMax=0xf44
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
wlan0: authenticate with 38:72:c0:ac:4d:59
wlan0: send auth to 38:72:c0:ac:4d:59 (try 1/3)
wlan0: authenticated
wlan0: associate with 38:72:c0:ac:4d:59 (try 1/3)
wlan0: RX AssocResp from 38:72:c0:ac:4d:59 (capab=0x411 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1354) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20131115/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f6c384b0), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f6c389a8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
audit_printk_skb: 135 callbacks suppressed
type=1400 audit(1422780699.302:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2287 comm="apparmor_parser"
type=1400 audit(1422780699.302:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2287 comm="apparmor_parser"
type=1400 audit(1422780699.302:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2287 comm="apparmor_parser"
type=1400 audit(1422782099.722:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2692 comm="apparmor_parser"
type=1400 audit(1422782099.722:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2692 comm="apparmor_parser"
type=1400 audit(1422782099.722:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2692 comm="apparmor_parser"
systemd-hostnamed[2826]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
systemd-hostnamed[4894]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (5023 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf samples too long (10067 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
systemd-hostnamed[6500]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!