dmesg - alex-prodam-dhry
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-23-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #34~precise1-Ubuntu SMP Wed May 29 21:12:31 UTC 2013 (Ubuntu 3.8.0-23.34~precise1-generic 3.8.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000cfeb1fff] usable
BIOS-e820: [mem 0x00000000cfeb2000-0x00000000cfec7fff] reserved
BIOS-e820: [mem 0x00000000cfec8000-0x00000000cfee7bff] ACPI data
BIOS-e820: [mem 0x00000000cfee7c00-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. PowerEdge R200/0TY019, BIOS 1.3.1 03/05/2008
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FE0000000 write-back
5 base 220000000 mask FF0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfeb2 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xcfeb1fff]
[mem 0x00000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfeb1fff] page 4k
kernel direct mapping tables up to 0xcfeb1fff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfeac000-0xcfeb1fff]
RAMDISK: [mem 0x36374000-0x371b1fff]
ACPI: RSDP 00000000000f2980 00024 (v02 DELL )
ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20121018/tbutils-682)
ACPI: RSDT 00000000000f29a4 0005C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000000f2aac 00074 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cfec8000 02545 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cfee7c00 00040
ACPI: APIC 00000000000f2c14 00072 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000000f2c93 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000000f2ce3 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000000f2d1b 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000000f2d57 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000000f2e8b 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI Error: Null physical address for ACPI table [(null)] (20121018/tbutils-468)
ACPI Error: Null physical address for ACPI table [(null)] (20121018/tbutils-468)
ACPI Error: Null physical address for ACPI table [(null)] (20121018/tbutils-468)
ACPI Error: Null physical address for ACPI table [(null)] (20121018/tbutils-468)
ACPI: SSDT 00000000cfeca545 00266 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfeca9bb 00266 (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfecae31 00162 (v01 DELL PE_SC3 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fffb000-0x22fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009ffff]
node 0: [mem 0x00100000-0xcfeb1fff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096706
DMA zone: 64 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 13243 pages used for memmap
DMA32 zone: 834295 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfeb2000 - 00000000cfec8000
PM: Registered nosave memory: 00000000cfec8000 - 00000000cfee7000
PM: Registered nosave memory: 00000000cfee7000 - 00000000cfee8000
PM: Registered nosave memory: 00000000cfee8000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s85056 r8192 d21440 u524288
pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063936
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8158792k/9175040k available (7164k kernel code, 788216k absent, 228032k reserved, 6080k data, 1012k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3000.144 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.28 BogoMIPS (lpj=12000576)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 29334 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (12000.57 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8802240313e8), AE_NOT_FOUND (20121018/psparse-537)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff]
pci 0000:00:00.0: [8086:29f0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29f1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xdc60-0xdc7f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xdc80-0xdc9f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xdca0-0xdcbf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xdfcffc00-0xdfcfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xdc30-0xdc37]
pci 0000:00:1f.2: reg 14: [io 0xdc28-0xdc2b]
pci 0000:00:1f.2: reg 18: [io 0xdc38-0xdc3f]
pci 0000:00:1f.2: reg 1c: [io 0xdc2c-0xdc2f]
pci 0000:00:1f.2: reg 20: [io 0xdc40-0xdc4f]
pci 0000:00:1f.2: reg 24: [io 0xdc50-0xdc5f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [mem 0xdfdf0000-0xdfdfffff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:04:00.0: [14e4:1659] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [mem 0xdfef0000-0xdfefffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:05:05.0: [1002:515e] type 00 class 0x030000
pci 0000:05:05.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:05:05.0: reg 14: [io 0xec00-0xecff]
pci 0000:05:05.0: reg 18: [mem 0xdfff0000-0xdfffffff]
pci 0000:05:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:05.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:05:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:05.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xcfeb2000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (disabled)
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0880-0x08bf] has been reserved
system 00:07: [io 0x08c0-0x08df] has been reserved
system 00:07: [io 0x08e0-0x08e3] has been reserved
system 00:07: [io 0x0900] has been reserved
system 00:07: [io 0x0c00-0x0c0f] has been reserved
system 00:07: [io 0x0c10-0x0c1f] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: [io 0x0c20-0x0c3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:09: [mem 0xe0000000-0xf3ffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd8000000-0xd81fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd8200000-0xd83fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xd8400000-0xd85fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xd8600000-0xd87fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xd8000000-0xd81fffff]
pci 0000:00:1c.0: bridge window [mem 0xd8200000-0xd83fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1c.4: bridge window [mem 0xd8400000-0xd85fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:1c.5: bridge window [mem 0xd8600000-0xd87fffff 64bit pref]
pci 0000:05:05.0: BAR 6: assigned [mem 0xdff00000-0xdff1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd81fffff]
pci_bus 0000:02: resource 2 [mem 0xd8200000-0xd83fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:03: resource 2 [mem 0xd8400000-0xd85fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:04: resource 2 [mem 0xd8600000-0xd87fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xdff00000-0xdfffffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0xd0000000-0xfdffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:05:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14584k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbeac000-0xcfeac000] (64MB) mapped at [ffff8800cbeac000-ffff8800cfeabfff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1421840474.460:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15963
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1028 ss_did 23c
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:06: [io 0x02f8-0x02ff]
serial 00:06: [irq 3]
serial 00:06: activated
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xdc30 ctl 0xdc28 bmdma 0xdc40 irq 23
ata2: SATA max UDMA/133 cmd 0xdc38 ctl 0xdc2c bmdma 0xdc48 irq 23
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xdfcffc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc60
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dc80
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-23-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: cfffd25cdc8710d969bf27d044c396b88fc4735a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:03: setting system clock to 2015-01-21 11:41:15 UTC (1421840475)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-5: new high-speed USB device number 2 using ehci-pci
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3000.209 MHz
Switching to clocksource tsc
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: TSSTcorpDVD-ROM TS-L333A, D100, max UDMA/33
ata1.01: ATA-8: WDC WD1601ABYS-18C0A0, 06.06H05, max UDMA/133
ata1.01: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/133
scsi 0:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-L333A D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1601ABYS-1 06.0 PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:1:0: [sda] Attached SCSI disk
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.00: ATA-8: WDC WD1602ABKS-18N8A0, 02.03B04, max UDMA/133
ata2.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1602ABKS-1 02.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1012k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1016k freed
Freeing unused kernel memory: 1008k freed
udevd[96]: starting version 175
Disabling lock debugging due to kernel taint
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.128 (December 03, 2012)
tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:21:9b:fb:e1:15
tg3 0000:03:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:21:9b:fb:e1:16
tg3 0000:04:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
floppy0: no floppy controllers found
md: md0 stopped.
md: bind
md: bind
md: raid1 personality registered for level 1
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 153377177600
md0: unknown partition table
md: md1 stopped.
md: bind
md: bind
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 6481182720
md1: unknown partition table
PM: Starting manual resume from disk
EXT4-fs (md0): INFO: recovery required on readonly filesystem
EXT4-fs (md0): write access will be enabled during recovery
EXT4-fs (md0): recovery complete
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
udevd[389]: starting version 175
evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
input: PC Speaker as /devices/platform/pcspkr/input/input1
evbug: Connected device: input1 (PC Speaker at isa0061/input0)
microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60b
EDAC MC: Ver: 3.0.0
ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \GPI3 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EDAC MC0: Giving out device to 'i3200_edac' 'i3200': DEV 0000:00:00.0
Error: Driver 'pcspkr' is already registered, aborting...
iTCO_vendor_support: vendor-support=0
gpio_ich: GPIO from 195 to 255 on gpio_ich
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x023C).
[drm] register mmio base: 0xDFFF0000
[drm] register mmio size: 65536
radeon 0000:05:05.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (32M used)
radeon 0000:05:05.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 4088218 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000036C80000).
radeon 0000:05:05.0: WB disabled
radeon 0000:05:05.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff880036c13000
[drm] Loading R100 Microcode
radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
[drm:r100_cp_init] *ERROR* Failed to load firmware!
radeon 0000:05:05.0: failed initializing CP (-2).
radeon 0000:05:05.0: Disabling GPU acceleration
[drm] radeon: cp finalized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:05:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:05:05.0: registered panic notifier
[drm] Initialized radeon 2.29.0 20080528 for 0000:05:05.0 on minor 0
floppy0: no floppy controllers found
Adding 6329272k swap on /dev/md1. Priority:-1 extents:1 across:6329272k
EXT4-fs (md0): re-mounted. Opts: (null)
EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
tg3 0000:03:00.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
tg3 0000:03:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
UDP: short packet: From 85.174.77.37:0 0/73 to 95.141.32.123:20480
UDP: short packet: From 31.180.134.13:0 0/109 to 95.141.32.123:20480
UDP: short packet: From 178.35.172.248:0 0/109 to 95.141.32.123:20480
UDP: short packet: From 189.110.205.185:27586 7456/110 to 95.141.32.123:13608
UDP: short packet: From 31.180.128.155:0 0/111 to 95.141.32.123:20480
UDP: bad checksum. From 96.248.224.237:53 to 95.141.32.123:56725 ulen 67
UDP: short packet: From 94.233.59.103:0 0/109 to 95.141.32.123:20480
UDP: short packet: From 94.233.59.103:0 0/109 to 95.141.32.123:20480
UDP: short packet: From 31.180.138.217:0 0/109 to 95.141.32.123:20480
UDP: short packet: From 178.35.156.54:0 0/73 to 95.141.32.123:20480