dmesg - normal1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-29-generic (buildd@tipua) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #39-Ubuntu SMP Mon Dec 15 22:27:29 UTC 2014 (Ubuntu 3.16.0-29.39-generic 3.16.7-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007d02afff] usable
BIOS-e820: [mem 0x000000007d02b000-0x000000007d05afff] reserved
BIOS-e820: [mem 0x000000007d05b000-0x000000007d332fff] usable
BIOS-e820: [mem 0x000000007d333000-0x000000007d400fff] ACPI NVS
BIOS-e820: [mem 0x000000007d401000-0x000000007e184fff] reserved
BIOS-e820: [mem 0x000000007e185000-0x000000007e1c7fff] type 20
BIOS-e820: [mem 0x000000007e1c8000-0x000000007e1c8fff] usable
BIOS-e820: [mem 0x000000007e1c9000-0x000000007e3cefff] ACPI NVS
BIOS-e820: [mem 0x000000007e3cf000-0x000000007e850fff] usable
BIOS-e820: [mem 0x000000007e851000-0x000000007efe1fff] reserved
BIOS-e820: [mem 0x000000007efe2000-0x000000007effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x7d3b7000 ACPI 2.0=0x7d3b7000 SMBIOS=0xf04c0 MPS=0xfd420
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000002f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x00000000024f6000) (20MB)
efi: mem06: type=7, attr=0xf, range=[0x00000000024f6000-0x0000000035906000) (820MB)
efi: mem07: type=2, attr=0xf, range=[0x0000000035906000-0x0000000036c7b000) (19MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000036c7b000-0x00000000515ce000) (425MB)
efi: mem09: type=2, attr=0xf, range=[0x00000000515ce000-0x000000006dc71000) (454MB)
efi: mem10: type=7, attr=0xf, range=[0x000000006dc71000-0x000000006dc77000) (0MB)
efi: mem11: type=1, attr=0xf, range=[0x000000006dc77000-0x000000006dd61000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x000000006dd61000-0x0000000071560000) (55MB)
efi: mem13: type=4, attr=0xf, range=[0x0000000071560000-0x0000000071566000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x0000000071566000-0x000000007156c000) (0MB)
efi: mem15: type=4, attr=0xf, range=[0x000000007156c000-0x00000000717a1000) (2MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000717a1000-0x00000000717a7000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000717a7000-0x00000000717b9000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000717b9000-0x00000000717ba000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000717ba000-0x000000007b497000) (156MB)
efi: mem20: type=7, attr=0xf, range=[0x000000007b497000-0x000000007b49a000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x000000007b49a000-0x000000007b4a5000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x000000007b4a5000-0x000000007b4a8000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x000000007b4a8000-0x000000007b4b1000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x000000007b4b1000-0x000000007b4b4000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x000000007b4b4000-0x000000007b4bc000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x000000007b4bc000-0x000000007b4bf000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x000000007b4bf000-0x000000007b4f5000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x000000007b4f5000-0x000000007b4f7000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x000000007b4f7000-0x000000007c773000) (18MB)
efi: mem30: type=7, attr=0xf, range=[0x000000007c773000-0x000000007cc9c000) (5MB)
efi: mem31: type=3, attr=0xf, range=[0x000000007cc9c000-0x000000007d02b000) (3MB)
efi: mem32: type=0, attr=0xf, range=[0x000000007d02b000-0x000000007d045000) (0MB)
efi: mem33: type=0, attr=0xf, range=[0x000000007d045000-0x000000007d05b000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x000000007d05b000-0x000000007d329000) (2MB)
efi: mem35: type=2, attr=0xf, range=[0x000000007d329000-0x000000007d333000) (0MB)
efi: mem36: type=10, attr=0xf, range=[0x000000007d333000-0x000000007d3ce000) (0MB)
efi: mem37: type=10, attr=0xf, range=[0x000000007d3ce000-0x000000007d3d4000) (0MB)
efi: mem38: type=10, attr=0xf, range=[0x000000007d3d4000-0x000000007d401000) (0MB)
efi: mem39: type=6, attr=0x800000000000000f, range=[0x000000007d401000-0x000000007de6e000) (10MB)
efi: mem40: type=6, attr=0x800000000000000f, range=[0x000000007de6e000-0x000000007de9a000) (0MB)
efi: mem41: type=6, attr=0x800000000000000f, range=[0x000000007de9a000-0x000000007de9c000) (0MB)
efi: mem42: type=6, attr=0x800000000000000f, range=[0x000000007de9c000-0x000000007e0c6000) (2MB)
efi: mem43: type=6, attr=0x800000000000000f, range=[0x000000007e0c6000-0x000000007e0c8000) (0MB)
efi: mem44: type=6, attr=0x800000000000000f, range=[0x000000007e0c8000-0x000000007e185000) (0MB)
efi: mem45: type=5, attr=0x800000000000000f, range=[0x000000007e185000-0x000000007e197000) (0MB)
efi: mem46: type=5, attr=0x800000000000000f, range=[0x000000007e197000-0x000000007e1c8000) (0MB)
efi: mem47: type=4, attr=0xf, range=[0x000000007e1c8000-0x000000007e1c9000) (0MB)
efi: mem48: type=10, attr=0xf, range=[0x000000007e1c9000-0x000000007e3cf000) (2MB)
efi: mem49: type=4, attr=0xf, range=[0x000000007e3cf000-0x000000007e539000) (1MB)
efi: mem50: type=3, attr=0xf, range=[0x000000007e539000-0x000000007e80d000) (2MB)
efi: mem51: type=4, attr=0xf, range=[0x000000007e80d000-0x000000007e80e000) (0MB)
efi: mem52: type=3, attr=0xf, range=[0x000000007e80e000-0x000000007e810000) (0MB)
efi: mem53: type=4, attr=0xf, range=[0x000000007e810000-0x000000007e832000) (0MB)
efi: mem54: type=3, attr=0xf, range=[0x000000007e832000-0x000000007e84c000) (0MB)
efi: mem55: type=4, attr=0xf, range=[0x000000007e84c000-0x000000007e84d000) (0MB)
efi: mem56: type=3, attr=0xf, range=[0x000000007e84d000-0x000000007e84f000) (0MB)
efi: mem57: type=4, attr=0xf, range=[0x000000007e84f000-0x000000007e851000) (0MB)
efi: mem58: type=6, attr=0x800000000000000f, range=[0x000000007e851000-0x000000007efe2000) (7MB)
efi: mem59: type=4, attr=0xf, range=[0x000000007efe2000-0x000000007f000000) (0MB)
efi: mem60: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f000000) (5104MB)
efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem67: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
efi: mem68: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F6 05/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6c0-0x000fd6cf] mapped at [ffff8800000fd6c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[mem 0x23c000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7d02afff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7cffffff] page 2M
[mem 0x7d000000-0x7d02afff] page 4k
init_memory_mapping: [mem 0x7d05b000-0x7d332fff]
[mem 0x7d05b000-0x7d332fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x7e1c8000-0x7e1c8fff]
[mem 0x7e1c8000-0x7e1c8fff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x7e3cf000-0x7e850fff]
[mem 0x7e3cf000-0x7e3fffff] page 4k
[mem 0x7e400000-0x7e7fffff] page 2M
[mem 0x7e800000-0x7e850fff] page 4k
init_memory_mapping: [mem 0x7efe2000-0x7effffff]
[mem 0x7efe2000-0x7effffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35906000-0x36c7afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007D3B7000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007D3B7080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007D3BD7C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
ACPI: DSDT 0x000000007D3B71A0 00661D (v02 ALASKA A M I 00000088 INTL 20051117)
ACPI: FACS 0x000000007D3F6080 000040
ACPI: APIC 0x000000007D3BD8D0 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007D3BD950 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007D3BD998 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000007D3BD9D8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 0x000000007D3BDA10 000047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x000000007D3BDA58 000078 (v02 AMD BANTRY 00000001 AMD 00000000)
ACPI: SSDT 0x000000007D3BDAD0 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000007D3BE670 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x000000007D3BE9B0 000550 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000007D3BEF00 001457 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000007D3C0358 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
NODE_DATA [mem 0x23eff6000-0x23effafff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x7d02afff]
node 0: [mem 0x7d05b000-0x7d332fff]
node 0: [mem 0x7e1c8000-0x7e1c8fff]
node 0: [mem 0x7e3cf000-0x7e850fff]
node 0: [mem 0x7efe2000-0x7effffff]
node 0: [mem 0x100000000-0x23effffff]
On node 0 totalpages: 1820483
DMA zone: 64 pages used for memmap
DMA zone: 46 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7967 pages used for memmap
DMA32 zone: 509860 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7d02b000-0x7d05afff]
PM: Registered nosave memory: [mem 0x7d333000-0x7d400fff]
PM: Registered nosave memory: [mem 0x7d401000-0x7e184fff]
PM: Registered nosave memory: [mem 0x7e185000-0x7e1c7fff]
PM: Registered nosave memory: [mem 0x7e1c9000-0x7e3cefff]
PM: Registered nosave memory: [mem 0x7e851000-0x7efe1fff]
PM: Registered nosave memory: [mem 0x7f000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023ec00000 s83328 r8192 d23168 u524288
pcpu-alloc: s83328 r8192 d23168 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1791990
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0x68000000-0x6bffffff] (65536KB)
PM: Registered nosave memory: [mem 0x68000000-0x6bffffff]
Memory: 6807960K/7281932K available (7740K kernel code, 1200K rwdata, 3608K rodata, 1356K init, 1308K bss, 473972K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 29360128 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3094.597 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6189.19 BogoMIPS (lpj=12378388)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
tseg: 007f000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
ftrace: allocating 29305 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G (fam: 15, model: 30, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24756.77 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7d333000-0x7d400fff] (843776 bytes)
PM: Registering ACPI NVS region [mem 0x7e1c9000-0x7e3cefff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:50:48, date: 01/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7805] type 00 class 0x010400
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:02:06.0: [1033:0035] type 00 class 0x0c0310
pci 0000:02:06.0: reg 0x10: [mem 0xfe902000-0xfe902fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.1: [1033:0035] type 00 class 0x0c0310
pci 0000:02:06.1: reg 0x10: [mem 0xfe901000-0xfe901fff]
pci 0000:02:06.1: supports D1 D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.2: [1033:00e0] type 00 class 0x0c0320
pci 0000:02:06.2: reg 0x10: [mem 0xfe900000-0xfe9000ff]
pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7d02b000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d333000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e1c9000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e851000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x80000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0220-0x0227] has been reserved
system 00:03: [io 0x0228-0x0237] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] could not be reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:03.1: PCI bridge to [bus 01]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
pci 0000:02:06.0: enabling device (0000 -> 0002)
pci 0000:02:06.1: enabling device (0000 -> 0002)
pci 0000:02:06.2: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19924K (ffff880035906000 - ffff880036c7b000)
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: no GSI
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PPR GT IA PC
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Using passthrough domain for device 0000:00:01.0
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x6d560000-0x71560000] (64MB) mapped at [ffff88006d560000-ffff88007155ffff]
perf: AMD NB counters detected
perf: amd_iommu: Detected. (2 banks, 4 counters/bank)
microcode: CPU0: patch_level=0x06003104
microcode: CPU1: patch_level=0x06003104
microcode: CPU2: patch_level=0x06003104
microcode: CPU3: patch_level=0x06003104
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1421754648.564:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 13708
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.1: irq 73 for MSI/MSI-X
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010f80000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:02:06.2: EHCI Host Controller
ehci-pci 0000:02:06.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:02:06.2: irq 22, io mem 0xfe900000
ehci-pci 0000:02:06.2: USB 2.0 started, EHCI 0.95
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
usb usb3: SerialNumber: 0000:02:06.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:02:06.0: OHCI PCI host controller
ohci-pci 0000:02:06.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:02:06.0: irq 20, io mem 0xfe902000
usb 4-1: new low-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=046e, idProduct=52ce
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Multimedia Keyboard
usb 4-1: Manufacturer: BTC
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb7: SerialNumber: 0000:02:06.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 3 ports detected
ohci-pci 0000:02:06.1: OHCI PCI host controller
ohci-pci 0000:02:06.1: new USB bus registered, assigned bus number 8
ohci-pci 0000:02:06.1: irq 21, io mem 0xfe901000
tsc: Refined TSC clocksource calibration: 3094.374 MHz
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb8: SerialNumber: 0000:02:06.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.16.0-29-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.16.0-29-generic xhci_hcd
usb usb10: SerialNumber: 0000:00:10.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 11
xhci_hcd 0000:00:10.1: irq 79 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 80 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 81 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 82 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 83 for MSI/MSI-X
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.16.0-29-generic xhci_hcd
usb usb11: SerialNumber: 0000:00:10.1
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 12
usb usb12: New USB device found, idVendor=1d6b, idProduct=0003
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 3.16.0-29-generic xhci_hcd
usb usb12: SerialNumber: 0000:00:10.1
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 70637fde89462678aff2d9c2bb1290be2fed1fb1'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 15:424:833
rtc_cmos 00:07: setting system clock to 2015-01-20 11:50:50 UTC (1421754650)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d2e000 - ffffffff81e81000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 440K (ffff880001792000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[118]: starting version 208
random: systemd-udevd urandom read with 7 bits of entropy available
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: irq 84 for MSI/MSI-X
r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c64000, fc:aa:14:05:12:e8, XID 0c900800 IRQ 84
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 85 for MSI/MSI-X
ahci 0000:00:11.0: irq 86 for MSI/MSI-X
ahci 0000:00:11.0: irq 87 for MSI/MSI-X
ahci 0000:00:11.0: irq 88 for MSI/MSI-X
ahci 0000:00:11.0: irq 89 for MSI/MSI-X
ahci 0000:00:11.0: irq 90 for MSI/MSI-X
ahci 0000:00:11.0: irq 91 for MSI/MSI-X
ahci 0000:00:11.0: irq 92 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 85
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 86
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 87
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 88
ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 89
ata6: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71380 irq 90
ata7: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71400 irq 91
ata8: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71480 irq 92
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:046E:52CE.0001/input/input4
hid-generic 0003:046E:52CE.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0
input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:046E:52CE.0002/input/input6
hid-generic 0003:046E:52CE.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-1/input1
usb 11-2: new high-speed USB device number 2 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usb 11-2: New USB device found, idVendor=1a40, idProduct=0101
usb 11-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 11-2: Product: USB 2.0 Hub
hub 11-2:1.0: USB hub found
hub 11-2:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: TOSHIBA THNSNJ256GCSU, JURA0101, max UDMA/100
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNJ25 0101 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): 12 orphan inodes deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 11-2.1: new low-speed USB device number 3 using xhci_hcd
usb 11-2.1: New USB device found, idVendor=05ac, idProduct=0304
usb 11-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-2.1: Product: Apple Optical USB Mouse
usb 11-2.1: Manufacturer: Mitsumi Electric
usb 11-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Adding 6234108k swap on /dev/sda3. Priority:-1 extents:1 across:6234108k SSFS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
random: nonblocking pool is initialized
systemd-udevd[373]: starting version 208
Switched to clocksource tsc
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1002:0x0123).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3510446 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading KAVERI Microcode
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 262144, num gpu pages 262144
lp0: using parport0 (interrupt-driven).
[drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88023253bc00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88023253bc04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88023253bc08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88023253bc0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88023253bc10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90011736c98
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff88023253bc18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff88023253bc1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 93 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
MCE: In-kernel MCE decoding enabled.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
EDAC MC: Ver: 3.0.0
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
AMD64 EDAC driver v3.4.0
input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:10.1/usb11/11-2/11-2.1/11-2.1:1.0/0003:05AC:0304.0003/input/input8
apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:10.1-2.1/input0
[drm] ring test on 5 succeeded in 1 usecs
AVX version of gcm_enc/dec engaged.
[drm] UVD initialized successfully.
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] ring test on 6 succeeded in 15 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
ip_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ip6_tables: (C) 2000-2006 Netfilter Core Team
audit: type=1400 audit(1421754652.008:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=629 comm="apparmor_parser"
audit: type=1400 audit(1421754652.008:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=629 comm="apparmor_parser"
audit: type=1400 audit(1421754652.008:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=629 comm="apparmor_parser"
audit: type=1400 audit(1421754652.044:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1421754652.044:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1421754652.044:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=666 comm="apparmor_parser"
init: cups main process (673) killed by HUP signal
init: cups main process ended, respawning
init: failsafe main process (740) killed by TERM signal
audit: type=1400 audit(1421754652.328:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=881 comm="apparmor_parser"
audit: type=1400 audit(1421754652.328:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=881 comm="apparmor_parser"
audit: type=1400 audit(1421754652.336:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=881 comm="apparmor_parser"
systemd-logind[883]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[883]: Watching system buttons on /dev/input/event4 (Video Bus)
systemd-logind[883]: Watching system buttons on /dev/input/event0 (Power Button)
systemd-logind[883]: New seat seat0.
[drm] ib test on ring 1 succeeded in 0 usecs
r8169 0000:01:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: alsa-restore main process (1118) terminated with status 19
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY3
[drm] CRT1: NUTMEG
[drm] fb mappable at 0xC098F000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATC0] (Node ffff880237040190), AE_NOT_FOUND (20140424/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATCS] (Node ffff880237040168), AE_NOT_FOUND (20140424/psparse-536)
[drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_intel 0000:00:01.1: irq 94 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: dig-out=0x11/0x1e
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Rear Mic=0x18
sound hdaudioC1D0: Front Mic=0x19
sound hdaudioC1D0: Line=0x1a
sound hdaudioC1D0: CD=0x1c
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
init: plymouth-upstart-bridge main process ended, respawning
systemd-logind[883]: Failed to start unit [email protected]: Unknown unit: [email protected]
systemd-logind[883]: Failed to start user service: Unknown unit: [email protected]
systemd-logind[883]: New session c1 of user lightdm.
systemd-logind[883]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display.
systemd-logind[883]: Failed to start unit [email protected]: Unknown unit: [email protected]
systemd-logind[883]: Failed to start user service: Unknown unit: [email protected]
systemd-logind[883]: New session c2 of user sg.
systemd-logind[883]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
audit_printk_skb: 57 callbacks suppressed
audit: type=1400 audit(1421754682.148:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2673 comm="apparmor_parser"
audit: type=1400 audit(1421754682.148:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2673 comm="apparmor_parser"
audit: type=1400 audit(1421754682.188:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2673 comm="apparmor_parser"
apple 0003:05AC:0304.0003: can't reset device, 0000:00:10.1-2.1/input0, status -71
usb 11-2.1: USB disconnect, device number 3
usb 11-2.1: new low-speed USB device number 4 using xhci_hcd
usb 11-2.1: New USB device found, idVendor=05ac, idProduct=0304
usb 11-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-2.1: Product: Apple Optical USB Mouse
usb 11-2.1: Manufacturer: Mitsumi Electric
usb 11-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:10.1/usb11/11-2/11-2.1/11-2.1:1.0/0003:05AC:0304.0004/input/input14
apple 0003:05AC:0304.0004: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:10.1-2.1/input0
usb 11-2.2: new high-speed USB device number 5 using xhci_hcd
usb 11-2.2: New USB device found, idVendor=13b1, idProduct=0039
usb 11-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 11-2.2: Product: Linksys AE1200
usb 11-2.2: Manufacturer: Cisco
usb 11-2.2: SerialNumber: 000000000001
usb 11-2.4: new high-speed USB device number 6 using xhci_hcd
usb 11-2.4: New USB device found, idVendor=05ac, idProduct=12a8
usb 11-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 11-2.4: Product: iPhone
usb 11-2.4: Manufacturer: Apple Inc.
usb 11-2.4: SerialNumber: 295c0b47d24c1a2dbe3246e63bfc6662556d12ad
usb 11-2.4: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 11-2.4: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 11-2.4: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 11-2.4: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 11-2.4:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
systemd-hostnamed[3073]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
Disabling lock debugging due to kernel taint
ndiswrapper version 1.59 loaded (smp=yes, preempt=no)
usb 11-2.2: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:10.1: Setup ERROR: setup context command for slot 3.
usb 11-2.2: hub failed to enable device, error -22
usb 11-2.2: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:10.1: Setup ERROR: setup context command for slot 3.
usb 11-2.2: hub failed to enable device, error -22
usb 11-2.2: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:10.1: xHCI xhci_drop_endpoint called with disabled ep ffff8802324a4000
xhci_hcd 0000:00:10.1: xHCI xhci_drop_endpoint called with disabled ep ffff8802324a4048
xhci_hcd 0000:00:10.1: xHCI xhci_drop_endpoint called with disabled ep ffff8802324a4090
xhci_hcd 0000:00:10.1: xHCI xhci_drop_endpoint called with disabled ep ffff8802324a40d8
ndiswrapper: driver bcmwlhigh5 (Cisco Consumer Products LLC,03/28/2011, 5.100.68.46) loaded
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012419000, 16000, 4
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001241ce80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012420d00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012424b80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012428a00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001242c880, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012430700, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012434580, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012438400, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001243c280, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012440100, 16000, 4
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012443f80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012447e00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001244bc80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001244fb00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012453980, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012457800, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001245b680, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001245f500, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012463380, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012467200, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001246b080, 16000, 4
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001246ef00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012472d80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012476c00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001247aa80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001247e900, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012482780, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012486600, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001248a480, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001248e300, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012492180, 16000, 4
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012496000, 16000, 4
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc90012499e80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc9001249dd00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124a1b80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124a5a00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124a9880, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124ad700, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124b1580, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124b5400, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124b9280, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124bd100, 16000, 4
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124c0f80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124c4e00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124c8c80, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124ccb00, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124d0980, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124d4800, 16000, 5
ndiswrapper (MmBuildMdlForNonPagedPool:1864): ffffc900124d8680, 16000, 5
ndiswrapper (ndis_encode_setting:383): unknown type: 3
wlan0: ethernet device 94:10:3e:7b:3c:ec using NDIS driver: bcmwlhigh5, version: 0x564442e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 13B1:0039.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2-PSK; AES/CCMP with WPA, WPA2, WPA2-PSK
usbcore: registered new interface driver ndiswrapper
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
ipheth 11-2.4:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 11-2.4: USB disconnect, device number 6
ipheth 11-2.4:4.2: Apple iPhone USB Ethernet now disconnected
[UFW BLOCK] IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:9610:3eff:fe7b:3cec DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:9610:3eff:fe7b:3cec DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=UDP SPT=8612 DPT=8612 LEN=24