dmesg - T2_7zip
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-44-generic (buildd@lamiak) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b4b1cfff] usable
BIOS-e820: [mem 0x00000000b4b1d000-0x00000000b531dfff] reserved
BIOS-e820: [mem 0x00000000b531e000-0x00000000b537bfff] usable
BIOS-e820: [mem 0x00000000b537c000-0x00000000b677bfff] reserved
BIOS-e820: [mem 0x00000000b677c000-0x00000000bf17efff] usable
BIOS-e820: [mem 0x00000000bf17f000-0x00000000bf97efff] reserved
BIOS-e820: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS
BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data
BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
e820: update [mem 0xb4706018-0xb4714a57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000b4706017] usable
reserve setup_data: [mem 0x00000000b4706018-0x00000000b4714a57] usable
reserve setup_data: [mem 0x00000000b4714a58-0x00000000b4b1cfff] usable
reserve setup_data: [mem 0x00000000b4b1d000-0x00000000b531dfff] reserved
reserve setup_data: [mem 0x00000000b531e000-0x00000000b537bfff] usable
reserve setup_data: [mem 0x00000000b537c000-0x00000000b677bfff] reserved
reserve setup_data: [mem 0x00000000b677c000-0x00000000bf17efff] usable
reserve setup_data: [mem 0x00000000bf17f000-0x00000000bf97efff] reserved
reserve setup_data: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS
reserve setup_data: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data
reserve setup_data: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable
reserve setup_data: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0xbfbfe000 ACPI 2.0=0xbfbfe014 SMBIOS=0xbf97df18
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000006e000) (0MB)
efi: mem03: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB)
efi: mem05: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB)
efi: mem06: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002403000) (20MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000002403000-0x000000003edab000) (969MB)
efi: mem10: type=2, attr=0xf, range=[0x000000003edab000-0x0000000040000000) (18MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000040000000-0x0000000084e0a000) (1102MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000084e0a000-0x00000000b3780000) (745MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000b3780000-0x00000000b37a0000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000b37a0000-0x00000000b4706000) (15MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000b4706000-0x00000000b4800000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000b4800000-0x00000000b4801000) (0MB)
efi: mem17: type=2, attr=0xf, range=[0x00000000b4801000-0x00000000b4802000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000b4802000-0x00000000b4805000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x00000000b4805000-0x00000000b4806000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000b4806000-0x00000000b4807000) (0MB)
efi: mem21: type=2, attr=0xf, range=[0x00000000b4807000-0x00000000b480a000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000b480a000-0x00000000b480f000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x00000000b480f000-0x00000000b4811000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000b4811000-0x00000000b4813000) (0MB)
efi: mem25: type=2, attr=0xf, range=[0x00000000b4813000-0x00000000b4814000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000b4814000-0x00000000b4818000) (0MB)
efi: mem27: type=2, attr=0xf, range=[0x00000000b4818000-0x00000000b4903000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000b4903000-0x00000000b4b1d000) (2MB)
efi: mem29: type=0, attr=0xf, range=[0x00000000b4b1d000-0x00000000b531e000) (8MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000b531e000-0x00000000b537c000) (0MB)
efi: mem31: type=0, attr=0xf, range=[0x00000000b537c000-0x00000000b677c000) (20MB)
efi: mem32: type=2, attr=0xf, range=[0x00000000b677c000-0x00000000b677f000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000b677f000-0x00000000b684b000) (0MB)
efi: mem34: type=1, attr=0xf, range=[0x00000000b684b000-0x00000000b697f000) (1MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000b697f000-0x00000000bc3eb000) (90MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000bc3eb000-0x00000000bcd0f000) (9MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000bcd0f000-0x00000000bcd11000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000bcd11000-0x00000000bce27000) (1MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000bce27000-0x00000000bce2c000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000bce2c000-0x00000000bce3e000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000bce3e000-0x00000000bce41000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000bce41000-0x00000000bcf84000) (1MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000bcf84000-0x00000000bcffc000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000bcffc000-0x00000000bd0a2000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000bd0a2000-0x00000000bd0a7000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000bd0a7000-0x00000000bd0a8000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000bd0a8000-0x00000000bd0ab000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000bd0ab000-0x00000000be97f000) (24MB)
efi: mem49: type=7, attr=0xf, range=[0x00000000be97f000-0x00000000bed98000) (4MB)
efi: mem50: type=3, attr=0xf, range=[0x00000000bed98000-0x00000000bf17f000) (3MB)
efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000bf17f000-0x00000000bf57f000) (4MB)
efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000bf57f000-0x00000000bf77f000) (2MB)
efi: mem53: type=0, attr=0xf, range=[0x00000000bf77f000-0x00000000bf97f000) (2MB)
efi: mem54: type=10, attr=0xf, range=[0x00000000bf97f000-0x00000000bfb7f000) (2MB)
efi: mem55: type=9, attr=0xf, range=[0x00000000bfb7f000-0x00000000bfbff000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x00000000bfbff000-0x00000000bfc00000) (0MB)
efi: mem57: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f000000) (496MB)
efi: mem58: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
efi: mem59: type=0, attr=0x0, range=[0x00000000bfc00000-0x00000000e0000000) (516MB)
efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem65: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: Acer Aspire V5-122/Aspire V5-122, BIOS V2.10 10/14/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00BFB67000 mask FFFFFFF000 uncachable
3 base 00FFC00000 mask FFFFC00000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000011f000000 aka 4592M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000080000] 80000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[mem 0x11c000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb4b1cfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xb49fffff] page 2M
[mem 0xb4a00000-0xb4b1cfff] page 4k
init_memory_mapping: [mem 0xb531e000-0xb537bfff]
[mem 0xb531e000-0xb537bfff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0xb677c000-0xbf17efff]
[mem 0xb677c000-0xb67fffff] page 4k
[mem 0xb6800000-0xbeffffff] page 2M
[mem 0xbf000000-0xbf17efff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xbfbff000-0xbfbfffff]
[mem 0xbfbff000-0xbfbfffff] page 4k
RAMDISK: [mem 0x3edab000-0x3fffafff]
ACPI: RSDP 00000000bfbfe014 000024 (v02 ACRSYS)
ACPI: XSDT 00000000bfbfe120 0000B4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 00000000bfbfc000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 00000000bfbee000 009FDE (v01 ACRSYS ACRPRDCT F0000000 1025 00040000)
ACPI: FACS 00000000bfb36000 000040
ACPI: UEFI 00000000bfbfd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 00000000bfbfb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 00000000bfbfa000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 00000000bfbf9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 00000000bfbf8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 00000000bfbed000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: WDRT 00000000bfbec000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: WDAT 00000000bfbeb000 0001AC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 00000000bfbea000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 00000000bfbe8000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000bfbe7000 00043C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000bfbe2000 0046B7 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: VFCT 00000000bfbdd000 004684 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000bfbdb000 0013CA (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000bfbda000 000D4E (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 00000000bfbd8000 0010C2 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BGRT 00000000bfbd7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
Initmem setup node 0 [mem 0x00000000-0x11effffff]
NODE_DATA [mem 0x11eff7000-0x11effbfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006dfff]
node 0: [mem 0x00070000-0x00085fff]
node 0: [mem 0x00100000-0xb4b1cfff]
node 0: [mem 0xb531e000-0xb537bfff]
node 0: [mem 0xb677c000-0xbf17efff]
node 0: [mem 0xbfbff000-0xbfbfffff]
node 0: [mem 0x100000000-0x11effffff]
On node 0 totalpages: 902402
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3971 pages, LIFO batch:0
DMA32 zone: 12054 pages used for memmap
DMA32 zone: 771455 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00086000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb4706000-0xb4706fff]
PM: Registered nosave memory: [mem 0xb4714000-0xb4714fff]
PM: Registered nosave memory: [mem 0xb4b1d000-0xb531dfff]
PM: Registered nosave memory: [mem 0xb537c000-0xb677bfff]
PM: Registered nosave memory: [mem 0xbf17f000-0xbf97efff]
PM: Registered nosave memory: [mem 0xbf97f000-0xbfb7efff]
PM: Registered nosave memory: [mem 0xbfb7f000-0xbfbfefff]
PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82304 r8192 d24192 u524288
pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 888279
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ ac000000
PM: Registered nosave memory: [mem 0xac000000-0xafffffff]
Memory: 3340172K/3609608K available (7383K kernel code, 1144K rwdata, 3408K rodata, 1336K init, 1444K bss, 269436K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 998.088 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.17 BogoMIPS (lpj=3992352)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bfc00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28554 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A4-1250 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (3992.35 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xbf97f000-0xbfb7efff] (2097152 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:12:02, date: 01/17/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
pci 0000:00:01.0: [1002:9834] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0900000-0xf093ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0940000-0xf0943fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0948000-0xf0949fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x2118-0x211f]
pci 0000:00:11.0: reg 0x14: [io 0x2124-0x2127]
pci 0000:00:11.0: reg 0x18: [io 0x2110-0x2117]
pci 0000:00:11.0: reg 0x1c: [io 0x2120-0x2123]
pci 0000:00:11.0: reg 0x20: [io 0x2100-0x210f]
pci 0000:00:11.0: reg 0x24: [mem 0xf094f000-0xf094f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf094e000-0xf094efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf094d000-0xf094d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf094c000-0xf094cfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf094b000-0xf094b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0944000-0xf0947fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf094a000-0xf094a0ff 64bit]
pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xf0800000-0xf087ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 01]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0xb4706018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb4b1d000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb537c000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xbf17f000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x0400-0x04cf] could not be reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0680-0x06ff] has been reserved
system 00:06: [io 0x077a] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cdb] has been reserved
system 00:06: [io 0x0840-0x0847] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0xffc00000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs SYN1b76 SYN1b00 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xffc00000-0xffffffff]
pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:02.3: BAR 15: assigned [mem 0xf0a00000-0xf0afffff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0960000-0xf097ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0a00000-0xf0a0ffff pref]
pci 0000:00:02.3: PCI bridge to [bus 01]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff]
pci 0000:00:02.3: bridge window [mem 0xf0a00000-0xf0afffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xf0800000-0xf08fffff]
pci_bus 0000:01: resource 2 [mem 0xf0a00000-0xf0afffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18752K (ffff88003edab000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb83eb000-0xbc3eb000] (64MB) mapped at [ffff8800b83eb000-ffff8800bc3eafff]
Simple Boot Flag at 0x44 set to 0x1
perf: AMD NB counters detected
perf: AMD L2I counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x0700010b
microcode: CPU1: patch_level=0x0700010b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1421496722.384:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6647
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (30 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (17 C)
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf094d000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf094b000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xf094e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-44-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xf094c000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-44-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-44-generic xhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-44-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 508c3b4bf108ed36b6062f812782f77c37b98537'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 15:684:228
rtc_cmos 00:04: setting system clock to 2015-01-17 12:12:05 UTC (1421496725)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
systemd-udevd[103]: starting version 204
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
scsi0 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf094f000 port 0xf094f100 irq 19
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
sdhci-pci 0000:00:14.7: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:00:14.7: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 2-1: New USB device found, idVendor=1bcf, idProduct=2c54
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: HD WebCam
usb 2-1: Manufacturer: NC.21411.01X343135E6LM0006
tsc: Refined TSC clocksource calibration: 998.128 MHz
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x126c00, board id: 2292, fw id: 1446543
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 4-2: new full-speed USB device number 2 using ohci-pci
usb 4-2: New USB device found, idVendor=04ca, idProduct=300b
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: new full-speed USB device number 3 using ohci-pci
Switched to clocksource tsc
usb 4-3: New USB device found, idVendor=04f3, idProduct=009d
usb 4-3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 4-3: Product: Touchscreen
usb 4-3: Manufacturer: ELAN
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
random: nonblocking pool is initialized
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (156) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (168) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (170) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (171) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (173) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (174) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (176) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (177) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (179) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (180) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (182) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 15998972k swap on /dev/sda5. Priority:-1 extents:1 across:15998972k FS
systemd-udevd[285]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (KABINI 0x1002:0x9834 0x1025:0x080D).
[drm] register mmio base: 0xF0900000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
[drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9834, size 17920
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 1703180 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading KABINI Microcode
usbcore: registered new interface driver btusb
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90004880000, irq=32
kvm: disabled by bios
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801179c0c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801179c0c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801179c0c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801179c0c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8801179c0c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900049b6c98
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 75 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
Linux video capture interface: v2.00
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:13.0/usb4/4-3/4-3:1.0/input/input8
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 5 usecs
hid-multitouch 0003:04F3:009D.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:13.0-3/input0
uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c54)
input: HD WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] Enabling audio 2 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
type=1400 audit(1421493140.141:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=418 comm="apparmor_parser"
type=1400 audit(1421493140.141:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
type=1400 audit(1421493140.141:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
type=1400 audit(1421493140.141:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=418 comm="apparmor_parser"
type=1400 audit(1421493140.141:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
type=1400 audit(1421493140.141:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=418 comm="apparmor_parser"
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input11
input: Acer BMA150 accelerometer as /devices/virtual/input/input12
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] fb mappable at 0xE1488000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
hda-intel 0000:00:01.1: Using LPIB position fix
snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X
hda-intel 0000:00:01.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input13
hda-intel 0000:00:14.2: Using LPIB position fix
snd_hda_intel 0000:00:14.2: irq 77 for MSI/MSI-X
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x40589b2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000008
SKU: customization=0x0000009b
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x1b
realtek: No valid SSID, checking pincfg 0x40589b2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9b2d CODEC_ID=10ec0282
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
init: failsafe main process (677) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1421493146.237:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=783 comm="apparmor_parser"
type=1400 audit(1421493146.237:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=783 comm="apparmor_parser"
type=1400 audit(1421493146.237:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=783 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (784) killed by HUP signal
init: cups main process ended, respawning
type=1400 audit(1421493148.013:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=867 comm="apparmor_parser"
type=1400 audit(1421493148.013:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
type=1400 audit(1421493148.013:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
type=1400 audit(1421493148.021:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
type=1400 audit(1421493148.021:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
type=1400 audit(1421493148.021:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
type=1400 audit(1421493148.025:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=866 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: samba-ad-dc main process (888) terminated with status 1
wlan0: authenticate with c0:4a:00:fc:2d:a9
wlan0: send auth to c0:4a:00:fc:2d:a9 (try 1/3)
wlan0: authenticated
wlan0: associate with c0:4a:00:fc:2d:a9 (try 1/3)
wlan0: RX AssocResp from c0:4a:00:fc:2d:a9 (capab=0x431 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from c0:4a:00:fc:2d:a9 by local choice (reason=2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with c0:4a:00:fc:2d:a9
wlan0: send auth to c0:4a:00:fc:2d:a9 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with c0:4a:00:fc:2d:a9 (try 1/3)
wlan0: RX AssocResp from c0:4a:00:fc:2d:a9 (capab=0x431 status=0 aid=4)
wlan0: associated
audit_printk_skb: 132 callbacks suppressed
type=1400 audit(1421493176.562:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1920 comm="apparmor_parser"
type=1400 audit(1421493176.562:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1920 comm="apparmor_parser"
type=1400 audit(1421493176.562:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1920 comm="apparmor_parser"
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 000871
usb 1-1: USB disconnect, device number 2
usbcore: registered new interface driver asix
usb 1-1: new high-speed USB device number 3 using ehci-pci
usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 000871
asix 1-1:1.0 (unregistered net_device): Failed to send software reset: ffffffb9
asix: probe of 1-1:1.0 failed with error -71
usb 1-1: USB disconnect, device number 3
usb 1-1: new high-speed USB device number 4 using ehci-pci
usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 000871
asix 1-1:1.0 (unregistered net_device): Failed to send software reset: ffffffb9
asix: probe of 1-1:1.0 failed with error -71
usb 1-1: USB disconnect, device number 4
usb 1-1: new high-speed USB device number 5 using ehci-pci
usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 000871
asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:12.2-1, ASIX AX88772 USB 2.0 Ethernet, 00:10:a3:09:d2:b9
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 1-1: USB disconnect, device number 5
asix 1-1:1.0 eth0: unregister 'asix' usb-0000:00:12.2-1, ASIX AX88772 USB 2.0 Ethernet
usb 1-1: new high-speed USB device number 6 using ehci-pci
usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 000871
asix 1-1:1.0 (unregistered net_device): Failed to send software reset: ffffffb9
asix: probe of 1-1:1.0 failed with error -71
usb 1-1: USB disconnect, device number 6
usb 1-1: new high-speed USB device number 7 using ehci-pci
usb 1-1: New USB device found, idVendor=0b95, idProduct=772a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 000871
asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:12.2-1, ASIX AX88772 USB 2.0 Ethernet, 00:10:a3:09:d2:b9
usb 1-1: USB disconnect, device number 7
asix 1-1:1.0 eth0: unregister 'asix' usb-0000:00:12.2-1, ASIX AX88772 USB 2.0 Ethernet
asix 1-1:1.0 eth0: Failed to send software reset: ffffffed
usb 1-1: new high-speed USB device number 8 using ehci-pci
usb 1-1: device not accepting address 8, error -71
usb 3-1: new full-speed USB device number 2 using ohci-pci
usb 3-1: not running at top speed; connect to a high speed hub
usb 3-1: New USB device found, idVendor=0b95, idProduct=772a
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: AX88x72A
usb 3-1: Manufacturer: ASIX Elec. Corp.
usb 3-1: SerialNumber: 000871
asix 3-1:1.0 eth0: register 'asix' at usb-0000:00:12.0-1, ASIX AX88772 USB 2.0 Ethernet, 00:10:a3:09:d2:b9
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
asix 3-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
wlan0: deauthenticating from c0:4a:00:fc:2d:a9 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
type=1400 audit(1421494002.533:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3231 comm="apparmor_parser"
type=1400 audit(1421494002.533:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3231 comm="apparmor_parser"
type=1400 audit(1421494002.533:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3231 comm="apparmor_parser"
usb 5-1: new full-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=045e, idProduct=0745
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0
usb 5-1: Manufacturer: Microsoft
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/input/input15
hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:10.0-1/input0
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.1/input/input16
hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:10.0-1/input1
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.2/input/input17
hid-generic 0003:045E:0745.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:10.0-1/input2
systemd-hostnamed[3730]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[17857]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
systemd-hostnamed[24809]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 5-1: USB disconnect, device number 2
usb 5-1: new full-speed USB device number 3 using xhci_hcd
usb 5-1: New USB device found, idVendor=1ffb, idProduct=0081
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 5-1: Product: Pololu USB AVR Programmer
usb 5-1: Manufacturer: Pololu Corporation
usb 5-1: SerialNumber: 00079698
cdc_acm 5-1:1.0: This device cannot do calls on its own. It is not a modem.
cdc_acm 5-1:1.0: ttyACM0: USB ACM device
cdc_acm 5-1:1.2: This device cannot do calls on its own. It is not a modem.
cdc_acm 5-1:1.2: ttyACM1: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters