dmesg - x366-conf

Return To x366-conf System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/x366--vg-root ro
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff66eff] usable
BIOS-e820: [mem 0x00000000bff66f00-0x00000000bff762ff] ACPI data
BIOS-e820: [mem 0x00000000bff76300-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: IBM IBM x3850-[88631RU]-/Node1 Processor Card, BIOS -[ZUE166AUS-1.12]- 02/15/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 0100000000 mask FF00000000 write-back
  3 base 0200000000 mask FE00000000 write-back
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff66 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x00099d40-0x00099d4f] mapped at [ffff880000099d40]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
 [mem 0x23fe00000-0x23fffffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
 [mem 0x23c000000-0x23fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
 [mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbff65fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xbfdfffff] page 2M
 [mem 0xbfe00000-0xbff65fff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
RAMDISK: [mem 0x359a2000-0x36cc8fff]
ACPI: RSDP 00000000000fdbd0 000014 (v00 IBM   )
ACPI: RSDT 00000000bff76280 000038 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: FACP 00000000bff76200 000074 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: DSDT 00000000bff66f00 002F27 (v01 IBM    SER01ZEU 00001000 INTL 20041203)
ACPI: FACS 00000000bff75f80 000040
ACPI: APIC 00000000bff76100 0000D2 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: SRAT 00000000bff76000 000100 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: HPET 00000000bff75fc0 000038 (v01 IBM    EXA01ZEU 00001000 IBM  45444F43)
ACPI: SSDT 00000000bff69e40 00C076 (v01 IBM    VIGSSDT0 00001000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
IBM Summit detected, will use apic physical
Setting APIC routing to physical flat.
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff]
NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23fffffff] -> [mem 0x00000000-0x23fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
  NODE_DATA [mem 0x23fff6000-0x23fffafff]
 [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00098fff]
  node   0: [mem 0x00100000-0xbff65fff]
  node   0: [mem 0x100000000-0x23fffffff]
On node 0 totalpages: 2096894
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3992 pages, LIFO batch:0
  DMA32 zone: 12222 pages used for memmap
  DMA32 zone: 782182 pages, LIFO batch:31
  Normal zone: 20480 pages used for memmap
  Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x9c
ACPI: Local APIC address 0xfee00000
IBM Summit detected, will use apic physical
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 15, version 17, address 0xfec00000, GSI 0-35
ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36])
IOAPIC[1]: apic_id 14, version 17, address 0xfec01000, GSI 36-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ8 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10142001 base: 0xfd984000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbff66000-0xbff66fff]
PM: Registered nosave memory: [mem 0xbff67000-0xbff75fff]
PM: Registered nosave memory: [mem 0xbff76000-0xbff76fff]
PM: Registered nosave memory: [mem 0xbff77000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2064107
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/x366--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: finished detection, Calgary found
PCI-DMA: Calgary IOMMU detected.
PCI-DMA: Calgary TCE table spec is 7
Memory: 8136880K/8387576K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 250696K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1560 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 3169.281 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6338.56 BogoMIPS (lpj=12677124)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ACPI Warning: Platform took > 100 usec to enter ACPI mode (20131115/evxfevnt-107)
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... works.
smpboot: CPU0: Intel(R) Xeon(TM) MP CPU 3.16GHz (fam: 0f, model: 04, stepping: 01)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (50713.19 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 16:57:24, date: 01/15/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
PCI: IBM System x3850 detected, can skip ISA alignment
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [VP00] (domain 0000 [bus 00])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [mem 0xeb500000-0xeb5fffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0x18ff]
pci 0000:00:00.0: [1014:02a1] type 00 class 0x060000
pci 0000:00:01.0: [1002:5159] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:00:01.0: reg 0x14: [io  0x1800-0x18ff]
pci 0000:00:01.0: reg 0x18: [mem 0xeb500000-0xeb50ffff]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:03.0: [1033:0035] type 00 class 0x0c0310
pci 0000:00:03.0: reg 0x10: [mem 0xeb510000-0xeb510fff]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.1: [1033:0035] type 00 class 0x0c0310
pci 0000:00:03.1: reg 0x10: [mem 0xeb511000-0xeb511fff]
pci 0000:00:03.1: supports D1 D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:03.2: [1033:00e0] type 00 class 0x0c0320
pci 0000:00:03.2: reg 0x10: [mem 0xeb512000-0xeb5120ff]
pci 0000:00:03.2: supports D1 D2
pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0f.0: [1166:0203] type 00 class 0x060000
pci 0000:00:0f.1: [1166:0213] type 00 class 0x010182
pci 0000:00:0f.1: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:0f.1: reg 0x14: [io  0x03f4-0x03f7]
pci 0000:00:0f.1: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:0f.1: reg 0x1c: [io  0x0374-0x0377]
pci 0000:00:0f.1: reg 0x20: [io  0x0700-0x070f]
pci 0000:00:0f.3: [1166:0227] type 00 class 0x060100
pci_bus 0000:00: on NUMA node 0 (pxm 0)
Section-unaligned hotplug range: start 0x100000, size 0xbff00000
ACPI: PCI Root Bridge [VP01] (domain 0000 [bus 01])
acpi PNP0A03:01: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [bus 01]
pci_bus 0000:01: root bus resource [mem 0xeb000000-0xeb4fffff]
pci_bus 0000:01: root bus resource [mem 0xd0000000-0xdfffffff]
pci 0000:01:00.0: [1014:02a1] type 00 class 0x060000
pci 0000:01:01.0: [14e4:1648] type 00 class 0x020000
pci 0000:01:01.0: reg 0x10: [mem 0xeb400000-0xeb40ffff 64bit]
pci 0000:01:01.0: PME# supported from D3hot D3cold
pci 0000:01:01.1: [14e4:1648] type 00 class 0x020000
pci 0000:01:01.1: reg 0x10: [mem 0xeb410000-0xeb41ffff 64bit]
pci 0000:01:01.1: PME# supported from D3hot D3cold
pci 0000:01:02.0: [9005:0285] type 00 class 0x010400
pci 0000:01:02.0: reg 0x10: [mem 0xeb000000-0xeb1fffff 64bit]
pci 0000:01:02.0: reg 0x18: [mem 0xeb200000-0xeb3fffff]
pci 0000:01:02.0: reg 0x20: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:02.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
pci 0000:01:02.0: supports D1
pci_bus 0000:01: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [VP02] (domain 0000 [bus 02-03])
acpi PNP0A03:02: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:02: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:02: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [1] registered
PCI host bridge to bus 0000:02
pci_bus 0000:02: root bus resource [bus 02-03]
pci_bus 0000:02: root bus resource [mem 0xe9800000-0xe9bfffff]
pci_bus 0000:02: root bus resource [mem 0xe8000000-0xe83fffff]
pci_bus 0000:02: root bus resource [io  0x2000-0x2fff]
pci 0000:02:00.0: [1014:02a1] type 00 class 0x060000
pci_bus 0000:02: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [VP03] (domain 0000 [bus 04-05])
acpi PNP0A03:03: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:03: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [2] registered
PCI host bridge to bus 0000:04
pci_bus 0000:04: root bus resource [bus 04-05]
pci_bus 0000:04: root bus resource [mem 0xe9c00000-0xe9ffffff]
pci_bus 0000:04: root bus resource [mem 0xe8400000-0xe87fffff]
pci_bus 0000:04: root bus resource [io  0x3000-0x3fff]
pci 0000:04:00.0: [1014:02a1] type 00 class 0x060000
pci_bus 0000:04: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [VP04] (domain 0000 [bus 06-07])
acpi PNP0A03:04: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:04: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:04: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [3] registered
PCI host bridge to bus 0000:06
pci_bus 0000:06: root bus resource [bus 06-07]
pci_bus 0000:06: root bus resource [mem 0xea000000-0xea3fffff]
pci_bus 0000:06: root bus resource [mem 0xe8800000-0xe8bfffff]
pci_bus 0000:06: root bus resource [io  0x4000-0x4fff]
pci 0000:06:00.0: [1014:02a1] type 00 class 0x060000
pci_bus 0000:06: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [VP05] (domain 0000 [bus 08-09])
acpi PNP0A03:05: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:05: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:05: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [4] registered
PCI host bridge to bus 0000:08
pci_bus 0000:08: root bus resource [bus 08-09]
pci_bus 0000:08: root bus resource [mem 0xea400000-0xea7fffff]
pci_bus 0000:08: root bus resource [mem 0xe8c00000-0xe8ffffff]
pci_bus 0000:08: root bus resource [io  0x5000-0x5fff]
pci 0000:08:00.0: [1014:02a1] type 00 class 0x060000
pci_bus 0000:08: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [VP06] (domain 0000 [bus 0a-0b])
acpi PNP0A03:06: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:06: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:06: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [5] registered
PCI host bridge to bus 0000:0a
pci_bus 0000:0a: root bus resource [bus 0a-0b]
pci_bus 0000:0a: root bus resource [mem 0xea800000-0xeabfffff]
pci_bus 0000:0a: root bus resource [mem 0xe9000000-0xe93fffff]
pci_bus 0000:0a: root bus resource [io  0x6000-0x6fff]
pci 0000:0a:00.0: [1014:02a1] type 00 class 0x060000
pci_bus 0000:0a: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [VP07] (domain 0000 [bus 0c-0d])
acpi PNP0A03:07: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:07: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:07: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [6] registered
PCI host bridge to bus 0000:0c
pci_bus 0000:0c: root bus resource [bus 0c-0d]
pci_bus 0000:0c: root bus resource [mem 0xeac00000-0xeaffffff]
pci_bus 0000:0c: root bus resource [mem 0xe9400000-0xe97fffff]
pci_bus 0000:0c: root bus resource [io  0x7000-0x7fff]
pci 0000:0c:00.0: [1014:02a1] type 00 class 0x060000
pci_bus 0000:0c: on NUMA node 0 (pxm 0)
ACPI: Enabled 2 GPEs in block 20 to 3F
ACPI: \_SB_.VP00: notify handler is installed
ACPI: \_SB_.VP01: notify handler is installed
ACPI: \_SB_.VP02: notify handler is installed
ACPI: \_SB_.VP03: notify handler is installed
ACPI: \_SB_.VP04: notify handler is installed
ACPI: \_SB_.VP05: notify handler is installed
ACPI: \_SB_.VP06: notify handler is installed
ACPI: \_SB_.VP07: notify handler is installed
Found 8 acpi root devices
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbff66f00-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfd984000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 3.707069 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:05: [dma 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
ACPI: IRQ 8 override to edge, low
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: [io  0x0400-0x047f] has been reserved
system 00:09: [io  0x0480-0x04ff] has been reserved
system 00:09: [io  0x0500-0x055f] has been reserved
system 00:09: [io  0x0600] has been reserved
system 00:09: [io  0x0800-0x0803] has been reserved
system 00:09: [io  0x0c00-0x0c8f] has been reserved
system 00:09: [io  0x0c90-0x0c9f] has been reserved
system 00:09: [io  0x0ca0-0x0ca7] has been reserved
system 00:09: [io  0x0ca9-0x0cab] has been reserved
system 00:09: [io  0x0cad-0x0caf] has been reserved
system 00:09: [io  0x0cb0-0x0cdf] has been reserved
system 00:09: [io  0x0f50-0x0f5f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io  0x0ca8] has been reserved
system 00:0a: [io  0x0cac] has been reserved
system 00:0a: Plug and Play ACPI device, IDs IPI0001 PNP0c02 (active)
pnp 00:0b: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:00:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x00007fff pref]
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0c: [mem 0xfd984000-0xfd9843ff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: BAR 6: assigned [mem 0xeb520000-0xeb53ffff pref]
pci_bus 0000:00: resource 4 [mem 0xeb500000-0xeb5fffff]
pci_bus 0000:00: resource 5 [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 8 [io  0x0d00-0x18ff]
pci 0000:01:02.0: BAR 6: assigned [mem 0xeb420000-0xeb427fff pref]
pci_bus 0000:01: resource 4 [mem 0xeb000000-0xeb4fffff]
pci_bus 0000:01: resource 5 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 4 [mem 0xe9800000-0xe9bfffff]
pci_bus 0000:02: resource 5 [mem 0xe8000000-0xe83fffff]
pci_bus 0000:02: resource 6 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 4 [mem 0xe9c00000-0xe9ffffff]
pci_bus 0000:04: resource 5 [mem 0xe8400000-0xe87fffff]
pci_bus 0000:04: resource 6 [io  0x3000-0x3fff]
pci_bus 0000:06: resource 4 [mem 0xea000000-0xea3fffff]
pci_bus 0000:06: resource 5 [mem 0xe8800000-0xe8bfffff]
pci_bus 0000:06: resource 6 [io  0x4000-0x4fff]
pci_bus 0000:08: resource 4 [mem 0xea400000-0xea7fffff]
pci_bus 0000:08: resource 5 [mem 0xe8c00000-0xe8ffffff]
pci_bus 0000:08: resource 6 [io  0x5000-0x5fff]
pci_bus 0000:0a: resource 4 [mem 0xea800000-0xeabfffff]
pci_bus 0000:0a: resource 5 [mem 0xe9000000-0xe93fffff]
pci_bus 0000:0a: resource 6 [io  0x6000-0x6fff]
pci_bus 0000:0c: resource 4 [mem 0xeac00000-0xeaffffff]
pci_bus 0000:0c: resource 5 [mem 0xe9400000-0xe97fffff]
pci_bus 0000:0c: resource 6 [io  0x7000-0x7fff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19612K (ffff8800359a2000 - ffff880036cc9000)
PCI-DMA: Using Calgary IOMMU
Calgary: enabling translation on Calgary PHB 0x0
Calgary: errant DMAs will now be prevented on this bus.
Calgary: enabling translation on Calgary PHB 0x1
Calgary: errant DMAs will now be prevented on this bus.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbf66000-0xbff66000] (64MB) mapped at [ffff8800bbf66000-ffff8800bff65fff]
microcode: CPU0 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU1 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU2 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU3 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU4 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU5 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU6 sig=0xf41, pf=0x20, revision=0x17
microcode: CPU7 sig=0xf41, pf=0x20, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1421341044.839:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15930
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:03.2: EHCI Host Controller
ehci-pci 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:03.2: irq 20, io mem 0xeb512000
ehci-pci 0000:00:03.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:03.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:03.0: OHCI PCI host controller
ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:03.0: irq 20, io mem 0xeb510000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci-pci 0000:00:03.1: OHCI PCI host controller
ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:03.1: irq 20, io mem 0xeb511000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one year, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 15:235:995
memory memory38: hash matches
rtc_cmos 00:06: setting system clock to 2015-01-15 16:57:25 UTC (1421341045)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[146]: starting version 204
scsi0 : pata_serverworks
scsi1 : pata_serverworks
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x700 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x708 irq 15
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
Adaptec aacraid driver 1.2-0[30200]-ms
AAC0: kernel 5.2-0[11844] Mar 21 2007
AAC0: monitor 5.2-0[11844]
AAC0: bios 5.2-0[11844]
AAC0: serial 14CA28
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi2 : ServeRAID
tg3.c:v3.134 (Sep 16, 2013)
scsi 2:0:0:0: Direct-Access     IBM      array1           V1.0 PQ: 0 ANSI: 2
scsi 2:1:0:0: Direct-Access     IBM-ESXS ST973401SS    F  B515 PQ: 0 ANSI: 4
scsi 2:1:1:0: Direct-Access     IBM-ESXS ST973401SS    F  B515 PQ: 0 ANSI: 4
scsi 2:1:2:0: Direct-Access     IBM-ESXS MAV2073RC        S113 PQ: 0 ANSI: 5
scsi 2:1:4:0: Direct-Access     IBM-ESXS ST973401SS    F  B515 PQ: 0 ANSI: 4
scsi 2:1:5:0: Direct-Access     IBM-ESXS ST973401SS    F  B515 PQ: 0 ANSI: 4
scsi 2:1:6:0: Direct-Access     IBM-ESXS ST973401SS    F  B515 PQ: 0 ANSI: 4
tg3 0000:01:01.0 eth0: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:0d:60:98:6f:6e
tg3 0000:01:01.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:01.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:01:01.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
scsi 2:3:0:0: Enclosure         IBM      SAS SES-2 DEVICE 0.09 PQ: 0 ANSI: 5
tg3 0000:01:01.1 eth1: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:0d:60:98:6f:6f
tg3 0000:01:01.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:01.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:01.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8082N, 0L03, max UDMA/33
ata1.00: configured for UDMA/33
scsi: waiting for bus probes to complete ...
sd 2:0:0:0: [sda] 214732800 512-byte logical blocks: (109 GB/102 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 06 00 10 00
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
scsi 2:1:0:0: Attached scsi generic sg1 type 0
scsi 2:1:1:0: Attached scsi generic sg2 type 0
scsi 2:1:2:0: Attached scsi generic sg3 type 0
scsi 2:1:4:0: Attached scsi generic sg4 type 0
scsi 2:1:5:0: Attached scsi generic sg5 type 0
scsi 2:1:6:0: Attached scsi generic sg6 type 0
scsi 2:3:0:0: Attached scsi generic sg7 type 13
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8082N 0L03 PQ: 0 ANSI: 5
 sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI removable disk
sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg8 type 5
random: lvm urandom read with 52 bits of entropy available
tsc: Refined TSC clocksource calibration: 3169.345 MHz
bio: create slab  at 1
ses 2:3:0:0: Attached Enclosure device
usb 3-1: new full-speed USB device number 2 using ohci-pci
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: New USB device found, idVendor=04b3, idProduct=4001
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: PPC I/F
usb 3-1: Manufacturer: IBM
usb 3-1: SerialNumber: 000d604793b0
usb 2-1: new low-speed USB device number 2 using ohci-pci
usb 2-1: New USB device found, idVendor=040b, idProduct=2000
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keyboard
usb 2-1: Manufacturer: Generic
Switched to clocksource tsc
random: nonblocking pool is initialized
Adding 8388604k swap on /dev/mapper/x366--vg-swap_1.  Priority:-1 extents:1 across:8388604k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[359]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x440, revision 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x000002, prod_id: 0x0007, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
hidraw: raw HID events driver (C) Jiri Kosina
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1014:0x02C8).
[drm] register mmio base: 0xEB500000
[drm] register mmio size: 65536
radeon 0000:00:01.0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (16M used)
radeon 0000:00:01.0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 4079686 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
input: IBM PPC I/F as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input4
hid-generic 0003:04B3:4001.0001: input,hidraw0: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:00:03.1-1/input0
[drm] PCI GART of 512M enabled (table at 0x0000000000100000).
radeon 0000:00:01.0: WB disabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x00000000c0000000 and cpu addr 0xffff880231f44000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
input: IBM PPC I/F as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input5
hid-generic 0003:04B3:4001.0002: input,hidraw1: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:00:03.1-1/input1
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input6
hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:03.0-1/input0
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.1/input/input7
hid-generic 0003:040B:2000.0004: input,hidraw3: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:03.0-1/input1
[drm] radeon: ring at 0x00000000C0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   DVI-I-1
[drm]   HPD2
[drm]   DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_DAC2
[drm]     DFP2: INTERNAL_DVO1
[drm] fb mappable at 0xE0040000
[drm] vram apper at 0xE0000000
[drm] size 2076672
[drm] fb depth is 8
[drm]    pitch is 1920
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
type=1400 audit(1421341050.867:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=466 comm="apparmor_parser"
type=1400 audit(1421341050.867:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=466 comm="apparmor_parser"
type=1400 audit(1421341050.867:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=466 comm="apparmor_parser"
type=1400 audit(1421341050.879:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=512 comm="apparmor_parser"
type=1400 audit(1421341050.879:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
type=1400 audit(1421341050.879:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
type=1400 audit(1421341051.091:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=564 comm="apparmor_parser"
type=1400 audit(1421341051.091:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=564 comm="apparmor_parser"
type=1400 audit(1421341051.091:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=564 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: failsafe main process (586) killed by TERM signal
type=1400 audit(1421341052.183:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=847 comm="apparmor_parser"
tg3 0000:01:01.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:01:01.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: tty1 main process ended, respawning
init: upstart-udev-bridge main process (355) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (517) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (613) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
perf samples too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000

Return To x366-conf System Information