dmesg - 44test_mandelbbrot-L

Return To 44test_mandelbbrot-L System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007feeffff] usable
BIOS-e820: [mem 0x000000007fef0000-0x000000007fef2fff] ACPI NVS
BIOS-e820: [mem 0x000000007fef3000-0x000000007fefffff] ACPI data
BIOS-e820: [mem 0x00000000f0000000-0x00000000f1ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer System Product Name/P5N-E SLI, BIOS ASUS P5N-E SLI ACPI BIOS Revision 0703 08/09/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CEFFF write-protect
  CF000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07FF00000 mask FFFF00000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
total RAM covered: 2047M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
found SMP MP-table at [mem 0x000f5c80-0x000f5c8f] mapped at [ffff8800000f5c80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
 [mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
 [mem 0x7c000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7feeffff]
 [mem 0x7fe00000-0x7feeffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
RAMDISK: [mem 0x348ac000-0x3644dfff]
ACPI: RSDP 00000000000f77c0 000024 (v02 Nvidia)
ACPI: XSDT 000000007fef30c0 000044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000007fef9740 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000007fef3240 0064AC (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 000000007fef0000 000040
ACPI: HPET 000000007fef9980 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 000000007fef9a00 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000007fef9880 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007feeffff]
Initmem setup node 0 [mem 0x00000000-0x7feeffff]
  NODE_DATA [mem 0x7feeb000-0x7feeffff]
 [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x7feeffff]
On node 0 totalpages: 523918
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 8124 pages used for memmap
  DMA32 zone: 519920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86400 r8192 d24192 u524288
pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515709
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2017504K/2095672K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 78168K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2666.724 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.44 BogoMIPS (lpj=10666896)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10666.89 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7fef0000-0x7fef2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 17:38:08, date: 01/04/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [10de:03a3] type 00 class 0x060000
pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000
pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000
pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000
pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000
pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000
pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000
pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000
pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000
pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000
pci 0000:00:01.2: [10de:03af] type 00 class 0x050000
pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000
pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000
pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000
pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000
pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000
pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000
pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000
pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [10de:03bb] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x20: [io  0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 0x24: [io  0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
pci 0000:00:0d.0: reg 0x20: [io  0xfd00-0xfd0f]
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
pci 0000:00:0e.0: reg 0x10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io  0xf800-0xf80f]
pci 0000:00:0e.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
pci 0000:00:0f.0: reg 0x10: [io  0x09e0-0x09e7]
pci 0000:00:0f.0: reg 0x14: [io  0x0be0-0x0be3]
pci 0000:00:0f.0: reg 0x18: [io  0x0960-0x0967]
pci 0000:00:0f.0: reg 0x1c: [io  0x0b60-0x0b63]
pci 0000:00:0f.0: reg 0x20: [io  0xf300-0xf30f]
pci 0000:00:0f.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 0x10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:14.0: reg 0x14: [io  0xf200-0xf207]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:01:00.0: [1002:954f] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfdfe0000-0xfdfeffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0xee00-0xeeff]
pci 0000:01:00.0: reg 0x30: [mem 0xfdfc0000-0xfdfdffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [197b:2360] type 00 class 0x010601
pci 0000:02:00.0: reg 0x10: [io  0xcf00-0xcf07]
pci 0000:02:00.0: reg 0x14: [io  0xce00-0xce03]
pci 0000:02:00.0: reg 0x18: [io  0xcd00-0xcd07]
pci 0000:02:00.0: reg 0x1c: [io  0xcc00-0xcc03]
pci 0000:02:00.0: reg 0x20: [io  0xcb00-0xcb0f]
pci 0000:02:00.0: reg 0x24: [mem 0xfdcfe000-0xfdcfffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:03:08.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:08.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
pci 0000:03:08.0: reg 0x14: [io  0xdf00-0xdf7f]
pci 0000:03:08.0: supports D2
pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
pci 0000:00:10.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:10.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:10.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fef0000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x1000-0x107f] has been reserved
system 00:00: [io  0x1080-0x10ff] has been reserved
system 00:00: [io  0x1400-0x147f] has been reserved
system 00:00: [io  0x1480-0x14ff] has been reserved
system 00:00: [io  0x1800-0x187f] has been reserved
system 00:00: [io  0x1880-0x18ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0297] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0a: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x000da000-0x000dbfff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:0b: [mem 0x7fef0000-0x7fefffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0x7feeffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfeff0000-0xfeff03ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 02]
pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:10.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:10.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:10.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28296K (ffff8800348ac000 - ffff88003644e000)
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb3
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1420393088.664:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 3995
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002400000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 15:651:642
rtc_cmos 00:04: setting system clock to 2015-01-04 17:38:09 UTC (1420393089)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[104]: starting version 204
pata_amd 0000:00:0d.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 20
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 20
[drm] Initialized drm 1.1.0 20060810
Floppy drive(s): fd0 is 1.44M
ahci 0000:02:00.0: version 3.0
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi6 : ahci
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x174B:0x174B).
[drm] register mmio base: 0xFDFE0000
[drm] register mmio size: 65536
ATOM BIOS: 
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 1024332 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV710 Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800350e9c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800350e9c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9000281c598
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 42 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
firewire_ohci 0000:03:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: _NEC DVD_RW ND-4550A, 1.06, max UDMA/33
ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
ata7: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   DVI-I-1
[drm]   HPD4
[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[drm] fb mappable at 0xE045E000
[drm] vram apper at 0xE0000000
[drm] size 3145728
[drm] fb depth is 24
[drm]    pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
 sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
Console: switching to colour frame buffer device 128x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:d4:95:b9
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
random: lvm urandom read with 35 bits of entropy available
bio: create slab  at 1
firewire_core 0000:03:08.0: created device fw0: GUID 0011d800018d085d, S400
tsc: Refined TSC clocksource calibration: 2666.666 MHz
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-2: new full-speed USB device number 2 using ohci-pci
usb 2-2: New USB device found, idVendor=046d, idProduct=c52f
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input6
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.0-2/input1
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-3: new low-speed USB device number 3 using ohci-pci
usb 2-3: New USB device found, idVendor=1c4f, idProduct=0002
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: USB Keyboard
usb 2-3: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input7
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:0b.0-3/input0
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input8
hid-generic 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:0b.0-3/input1
random: nonblocking pool is initialized
Switched to clocksource tsc
Adding 2093052k swap on /dev/mapper/mint--vg-swap_1.  Priority:-1 extents:1 across:2093052k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[405]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
i2c i2c-7: nForce2 SMBus adapter at 0x1c00
i2c i2c-8: nForce2 SMBus adapter at 0x1c80
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot detected
nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
device-mapper: multipath: version 1.6.0 loaded
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
hda-intel 0000:00:10.1: Disabling 64bit DMA
hda-intel 0000:00:10.1: Enable delay in RIRB handling
SKU: Nid=0x1d sku_cfg=0x4005c603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d
realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0883
init: failsafe main process (655) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (740) killed by HUP signal
init: cups main process ended, respawning
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
init: samba-ad-dc main process (836) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1346) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Netfilter messages via NETLINK v0.30.

Return To 44test_mandelbbrot-L System Information