dmesg - gzipbanana
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.104+ (root@nico-desktop) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #3 SMP PREEMPT Wed Nov 19 08:28:34 CET 2014
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
Memory Reserved:
SYS : 0x43000000 - 0x4300ffff ( 64 kB)
VE : 0x44000000 - 0x48ffffff ( 80 MB)
G2D : 0x49000000 - 0x49ffffff ( 16 MB)
LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
Memory policy: ECC disabled, Data cache writealloc
sunxi: Allwinner A20 (AW1651/sun7i) detected.
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c08ea040, node_mem_map d0000000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
Normal zone: 1008 pages used for memmap
Normal zone: 128016 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67056 pages, LIFO batch:15
PERCPU: Embedded 7 pages/cpu @d0808000 s7680 r8192 d12800 u32768
pcpu-alloc: s7680 r8192 d12800 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line: console=ttyS0,115200 console=tty0 disp.screen0_output_mode=EDID:1280x720p50 hdmi.audio=EDID:0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 1024MB = 1024MB total
Memory: 895292k/895292k available, 153284k reserved, 270336K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0843f20 (8432 kB)
.init : 0xc0844000 - 0xc087de00 ( 232 kB)
.data : 0xc087e000 - 0xc08f1cd0 ( 464 kB)
.bss : 0xc08f1cf4 - 0xc0ac18e0 (1855 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Additional per-CPU info printed with stalls.
NR_IRQS:192
Architected local timer running at 24.00MHz.
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
Setting up static identity map for 0x405bb600 - 0x405bb658
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3830.57 BogoMIPS).
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
[ccu-inf] aw clock manager init
[ccu-inf] aw_ccu_init
[ccu-inf] script config pll3 to 297MHz
[ccu-inf] script config pll4 to 300MHz
[ccu-inf] script config pll6 to 600MHz
[ccu-inf] script config pll7 to 297MHz
[ccu-inf] script config pll8 to 336MHz
Init eGon pin module V2.0
bio: create slab at 0
sunxi_gpio driver init ver 1.3
gpiochip_add: registered GPIOs 1 to 88 on device: A1X_GPIO
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
WRN:L287(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: det_vbus pin is invaild
WRN:L426(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: check_usb_board_info failed
WRN:L480(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get_usb_cfg failed
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.520:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.18)
msgmni has been set to 1220
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
sunxi disp driver loaded (/dev/disp api 1.0)
[uart]: used uart info.: 0x8d
[uart]: serial probe 0 irq 33 mapbase 0x01c28000
sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
console [ttyS0] enabled
[uart]: serial probe 2 irq 35 mapbase 0x01c28800
sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[uart]: serial probe 3 irq 36 mapbase 0x01c28c00
sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
[uart]: serial probe 7 irq 52 mapbase 0x01c29c00
sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
G2D: drv_g2d_init
G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
G2D: head:c9000000,tail:ca000000
G2D: Module initialized.major:250
brd: module loaded
loop: module loaded
gpio count < =0 ,gpio_count is: 0
sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
Fixed MDIO Bus: probed
eth%d: device MAC address 02:8a:07:82:06:8e
gmac_para gpio count is 18
[gmac]: sun6i_gmac platform driver registration completed
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
ehci_irq: port change detect
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb1: Manufacturer: Linux 3.4.104+ ehci_hcd
usb usb1: SerialNumber: sw-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[sw-ohci1]: open clock
sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
ata1: SATA link down (SStatus 0 SControl 300)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
usb usb2: Manufacturer: Linux 3.4.104+ ohci_hcd
usb usb2: SerialNumber: sw-ohci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
[sw-ehci2]: open clock
ehci_irq: port change detect
[sw-ehci2]: Set USB Power ON
sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
The port change to OHCI now!
sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
ehci_irq: port change detect
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb3: Manufacturer: Linux 3.4.104+ ehci_hcd
usb usb3: SerialNumber: sw-ehci
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
[sw-ohci2]: open clock
sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
usb 2-1: new low-speed USB device number 2 using sw-ohci
usb usb4: Manufacturer: Linux 3.4.104+ ohci_hcd
usb usb4: SerialNumber: sw-ohci
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
input: sunxi-ir as /devices/virtual/input/input0
IR Initial OK
sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
i2c /dev entries driver
config i2c gpio with gpio_config api
axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
axp_mfd 0-0034: AXP internal temperature monitoring enabled
[AXP]axp driver uning configuration failed(342)
[AXP]power_start = 0
I2C: i2c-0: AW16XX I2C adapter
config i2c gpio with gpio_config api
I2C: i2c-1: AW16XX I2C adapter
config i2c gpio with gpio_config api
I2C: i2c-2: AW16XX I2C adapter
config i2c gpio with gpio_config api
I2C: i2c-3: AW16XX I2C adapter
[ace_drv] start!!!
[ace_drv] init end!!!
[pa_drv] start!!!
[pa_drv] init end!!!
Driver for 1-wire Dallas network protocol.
invalid gpio pin in fex configuration : -1
axp20_ldo1: 1300 mV
axp20_ldo2: 1800 3300 mV at 3000 mV
axp20_ldo3: 700 3500 mV at 2800 mV
usb 2-1: New USB device found, idVendor=0461, idProduct=4d22
axp20_ldo4: 1250 3300 mV at 2800 mV
axp20_buck2: 700 2275 mV at 1450 mV
axp20_buck3: 700 3500 mV at 1300 mV
axp20_ldoio0: 1800 3300 mV at 2800 mV
input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
axp20_ldo2: Failed to create debugfs directory
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
ehci_irq: port change detect
cpuidle: using governor menu
[mmc-msg] sw_mci_init
[mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
The port change to OHCI now!
[mmc-msg] sdc0 Probe: base:0xf0154000 irq:64 sg_cpu:f0156000(4fc00000) ret 0.
[mmc_pm]: failed to fetch sdio card configuration!
sunxi_leds driver init
Registered led device: green:ph24:led1
ledtrig-cpu: registered to indicate activity on CPUs
input: USB Optical Mouse as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-sw-ohci-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
IPv4 over IPv4 tunneling driver
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
[mmc_pm]: No sdio card, please check your config !!
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
Registering SWP/SWPB emulation handler
axp20_buck2: Failed to create debugfs directory
usb 4-1: new low-speed USB device number 2 using sw-ohci
[cpu_freq] INF:-------------------V-F Table-------------------
[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[cpu_freq] INF:-----------------------------------------------
[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
registered taskstats version 1
I2C: i2c-4: HDMI I2C adapter
ParseEDID
usb 4-1: New USB device found, idVendor=413c, idProduct=2105
EDID version: 1.3
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
Using above mode as preferred EDID mode
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Unimplemented SVD code 2
Unimplemented SVD code 6
Unimplemented SVD code 15
Unimplemented SVD code 14
Unimplemented SVD code 31
Unimplemented SVD code 30
Unimplemented SVD code 29
Unimplemented SVD code 17
Unimplemented SVD code 22
Reserved SVD code 127
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 108100000 pclk
disp_clk: Could not find a matching pll-freq for 25150000 pclk
disp_clk: Could not find a matching pll-freq for 74200000 pclk
disp_clk: Could not find a matching pll-freq for 53900000 pclk
disp_clk: Could not find a matching pll-freq for 146850000 pclk
disp_clk: Could not find a matching pll-freq for 172900000 pclk
disp_clk: Could not find a matching pll-freq for 78800000 pclk
disp_clk: Could not find a matching pll-freq for 53450000 pclk
disp_clk: Could not find a matching pll-freq for 27100000 pclk
disp_clk: Could not find a matching pll-freq for 26150000 pclk
Parse_VideoData_Block: VIC 16 (native) support
Parse_VideoData_Block: VIC 5 support
Parse_VideoData_Block: VIC 4 support
Parse_VideoData_Block: VIC 3 support
Parse_VideoData_Block: VIC 2 support
Parse_VideoData_Block: VIC 7 support
Parse_VideoData_Block: VIC 6 support
Parse_VideoData_Block: VIC 15 support
Parse_VideoData_Block: VIC 14 support
Parse_VideoData_Block: VIC 31 support
Parse_VideoData_Block: VIC 20 support
Parse_VideoData_Block: VIC 30 support
Parse_VideoData_Block: VIC 29 support
Parse_VideoData_Block: VIC 19 support
Parse_VideoData_Block: VIC 18 support
Parse_VideoData_Block: VIC 17 support
Parse_VideoData_Block: VIC 22 support
Parse_VideoData_Block: VIC 1 support
Parse_AudioData_Block: max channel=2
Parse_AudioData_Block: SampleRate code=7f
Parse_AudioData_Block: WordLen code=7
Find HDMI Vendor Specific DataBlock
PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
[mmc-msg] mmc 0 detect change, present 1
PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
usb 4-1: Product: Dell USB Keyboard
asoc: sndhdmi sunxi-hdmiaudio.0 mapping ok
waited 0 ms for EDID info
disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
usb 4-1: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input3
generic-usb 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-sw-ohci-1/input0
[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 power on
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set round clock 400000, src 24000000
[mmc-err] smc 0 err, cmd 52, RTO
[mmc-err] smc 0 err, cmd 52, RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-err] smc 0 err, cmd 5, RTO
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[mmc-msg] sdc0 set round clock 42857143, src 600000000
[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU16G 14.8 GiB
mmcblk0: p1 p2
Console: switching to colour frame buffer device 240x67
axp20_buck3: incomplete constraints, leaving on
axp20_buck2: incomplete constraints, leaving on
axp20_ldo4: incomplete constraints, leaving on
axp20_ldo3: incomplete constraints, leaving on
axp20_ldo2: incomplete constraints, leaving on
axp20_ldo1: incomplete constraints, leaving on
console [netcon0] enabled
netconsole: network logging started
otg_wakelock_init: No USB transceiver found
sunxi-rtc sunxi-rtc: setting system clock to 2014-12-24 05:53:39 UTC (1419400419)
ALSA device list:
#0: sunxi-CODEC Audio Codec
#1: sunxi-sndhdmi
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 228K
udevd[167]: starting version 175
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Adding 524284k swap on /swapfile1. Priority:-1 extents:8 across:868348k SS
GMAC gpio_power_hd:gpio_direction_output
eth0: device MAC address 02:8a:07:82:06:8e
sunxi_gmac: probed
eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
eth0: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
PHY: sunxi_gmac-0:00 - Link is Up - 1000/Full
EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered