dmesg - hp6600
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/6600--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cffc283f] usable
BIOS-e820: [mem 0x00000000cffc2840-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Hewlett-Packard HP xw6600 Workstation/0A9Ch, BIOS 786F4 v01.32 10/15/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x830000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0830000000 mask 3FF0000000 uncachable
1 base 00D0000000 mask 3FF0000000 uncachable
2 base 00E0000000 mask 3FE0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xcffc2 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff8800000fe700]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x82fe00000-0x82fffffff]
[mem 0x82fe00000-0x82fffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x82c000000-0x82fdfffff]
[mem 0x82c000000-0x82fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x82bffffff]
[mem 0x800000000-0x82bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcffc1fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcffc1fff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x359ae000-0x36ccefff]
ACPI: RSDP 00000000000e9810 000024 (v02 HPQOEM)
ACPI: XSDT 00000000cffc52ec 00006C (v01 HPQOEM SLIC-WKS 20081015 00000000)
ACPI: FACP 00000000cffc5494 0000F4 (v03 HPQOEM SEABURG 00000001 00000000)
ACPI BIOS Error (bug): 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20131115/tbfadt-462)
ACPI: DSDT 00000000cffc5a6e 0026A4 (v01 HPQOEM DSDT 00000001 MSFT 0100000E)
ACPI: FACS 00000000cffc5200 000040
ACPI: SSDT 00000000cffc8112 006E99 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E)
ACPI: APIC 00000000cffc5588 0000C8 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: ASF! 00000000cffc5650 00006A (v32 HPQOEM SEABURG 00000001 00000000)
ACPI: MCFG 00000000cffc5852 00003C (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: SLIC 00000000cffc588e 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 00000000cffc5a04 000038 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: TCPA 00000000cffc5a3c 000032 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: DMAR 00000000cffc56ba 000108 (v01 HPQOEM SEABURG 00000001 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082fffffff]
Initmem setup node 0 [mem 0x00000000-0x82fffffff]
NODE_DATA [mem 0x82ffdd000-0x82ffe1fff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080f600000-ffff88082f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcffc1fff]
node 0: [mem 0x100000000-0x82fffffff]
On node 0 totalpages: 8388448
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13248 pages used for memmap
DMA32 zone: 847810 pages, LIFO batch:31
Normal zone: 117760 pages used for memmap
Normal zone: 7536640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xcffc2000-0xcffc2fff]
PM: Registered nosave memory: [mem 0xcffc3000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88082fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8257355
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/6600--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32926184K/33553792K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 627608K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1152 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3000.020 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.04 BogoMIPS (lpj=12000080)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fe710000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
dmar: DRHD base: 0x000000fe714000 flags: 0x0
dmar: IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
dmar: DRHD base: 0x000000fe719000 flags: 0x0
dmar: IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
dmar: DRHD base: 0x000000fe718000 flags: 0x1
dmar: IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
dmar: RMRR base: 0x000000cffd3000 end: 0x000000cffd3fff
dmar: RMRR base: 0x000000cffd4000 end: 0x000000cffd4fff
dmar: RMRR base: 0x000000cffd5000 end: 0x000000cffd5fff
dmar: RMRR base: 0x000000cffd6000 end: 0x000000cffd6fff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (48001.23 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:26:51, date: 12/18/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000cffd07f4 0008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880803d82c30), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: [8086:4003] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:4021] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:4025] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:4029] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [8086:4030] type 00 class 0x060000
pci 0000:00:10.1: [8086:4030] type 00 class 0x060000
pci 0000:00:10.2: [8086:4030] type 00 class 0x060000
pci 0000:00:10.3: [8086:4030] type 00 class 0x060000
pci 0000:00:10.4: [8086:4030] type 00 class 0x060000
pci 0000:00:11.0: [8086:4031] type 00 class 0x060000
pci 0000:00:15.0: [8086:4035] type 00 class 0x060000
pci 0000:00:15.1: [8086:4035] type 00 class 0x060000
pci 0000:00:16.0: [8086:4036] type 00 class 0x060000
pci 0000:00:16.1: [8086:4036] type 00 class 0x060000
pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2100000-0xf2103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x2000-0x201f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x2040-0x205f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x2060-0x207f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf2104000-0xf21043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x20c0-0x20c7]
pci 0000:00:1f.1: reg 0x14: [io 0x20e0-0x20e3]
pci 0000:00:1f.1: reg 0x18: [io 0x20c8-0x20cf]
pci 0000:00:1f.1: reg 0x1c: [io 0x20e4-0x20e7]
pci 0000:00:1f.1: reg 0x20: [io 0x20a0-0x20af]
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x20d0-0x20d7]
pci 0000:00:1f.2: reg 0x14: [io 0x20e8-0x20eb]
pci 0000:00:1f.2: reg 0x18: [io 0x20d8-0x20df]
pci 0000:00:1f.2: reg 0x1c: [io 0x20ec-0x20ef]
pci 0000:00:1f.2: reg 0x20: [io 0x20b0-0x20bf]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2104400-0xf21047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 80]
pci 0000:60:00.0: [10de:029d] type 00 class 0x030000
pci 0000:60:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
pci 0000:60:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:60:00.0: reg 0x1c: [mem 0xf1000000-0xf1ffffff 64bit]
pci 0000:60:00.0: reg 0x24: [io 0x1000-0x107f]
pci 0000:60:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:60:00.0: System wakeup disabled by ACPI
pci 0000:60:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 60]
pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:10:00.0: [8086:3500] type 01 class 0x060400
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: [8086:350c] type 01 class 0x060400
pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:09.0: PCI bridge to [bus 10-40]
pci 0000:00:09.0: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:1e:00.0: [8086:3510] type 01 class 0x060400
pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:00.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: [8086:3514] type 01 class 0x060400
pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:01.0: System wakeup disabled by ACPI
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:10:00.0: PCI bridge to [bus 1e-40]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1e:01.0: PCI bridge to [bus 40]
pci 0000:10:00.3: PCI bridge to [bus 11-1d]
pci 0000:0e:00.0: [14e4:167b] type 00 class 0x020000
pci 0000:0e:00.0: reg 0x10: [mem 0xf2000000-0xf200ffff 64bit]
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:0e:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 0e]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:60:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffc2840-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0x0480-0x048f] has been reserved
system 00:0c: [io 0x0490-0x049f] has been reserved
system 00:0c: [io 0xf800-0xf81f] could not be reserved
system 00:0c: [io 0xf820-0xf83f] has been reserved
system 00:0c: [io 0xf840-0xf85f] has been reserved
system 00:0c: [io 0xf860-0xf87f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfc00-0xfc7f] has been reserved
system 00:0c: [io 0xfc80-0xfcff] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0d: [mem 0xfe700000-0xfe7003ff] has been reserved
system 00:0d: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:0d: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000e7fff] could not be reserved
system 00:0e: [mem 0x000e8000-0x000effff] could not be reserved
system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 16 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 80]
pci 0000:60:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:05.0: PCI bridge to [bus 60]
pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:1e:00.0: PCI bridge to [bus 20]
pci 0000:1e:01.0: PCI bridge to [bus 40]
pci 0000:10:00.0: PCI bridge to [bus 1e-40]
pci 0000:10:00.3: PCI bridge to [bus 11-1d]
pci 0000:00:09.0: PCI bridge to [bus 10-40]
pci 0000:00:09.0: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:00:1c.0: PCI bridge to [bus 0e]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 10 [io 0x0d00-0xffff]
pci_bus 0000:60: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:60: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:60: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:10: resource 1 [mem 0xf2200000-0xf22fffff]
pci_bus 0000:0e: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 5 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 9 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 10 [io 0x0d00-0xffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:60:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19588K (ffff8800359ae000 - ffff880036ccf000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbfc2000-0xcffc2000] (64MB) mapped at [ffff8800cbfc2000-ffff8800cffc1fff]
microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU4 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU5 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU6 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU7 sig=0x1067a, pf=0x40, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1418927210.708:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:1e:00.0: device [8086:3510] has invalid IRQ; check vendor BIOS
pcieport 0000:1e:01.0: device [8086:3514] has invalid IRQ; check vendor BIOS
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90013600000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20a8 irq 15
ata2: port disabled--ignoring
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x20d0 ctl 0x20e8 bmdma 0x20b0 irq 19
ata4: SATA max UDMA/133 cmd 0x20d8 ctl 0x20ec bmdma 0x20b8 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ata3.01: NODEV after polling detection
ata3.00: ATAPI: hp DVDROM DH20N, DB02, max UDMA/100
ata4.00: ATA-8: ST3250318AS, HP34, max UDMA/100
ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM hp DVDROM DH20N DB02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 12x/40x cd/rw xa/form2 cdda tray
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0xf2104000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:673:443
rtc_cmos 00:03: setting system clock to 2014-12-18 18:26:52 UTC (1418927212)
hpet1: lost 91 rtc interrupts
cdrom: Uniform CD-ROM driver Revision: 3.20
tsc: Refined TSC clocksource calibration: 3000.106 MHz
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access ATA ST3250318AS HP34 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
sd 3:0:0:0: [sda] Attached SCSI disk
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[155]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.134 (Sep 16, 2013)
FDC 0 is a post-1991 82077
tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1f:29:02:f3:7d
tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
random: lvm urandom read with 57 bits of entropy available
Switched to clocksource tsc
bio: create slab at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
random: nonblocking pool is initialized
psmouse serio1: Failed to enable mouse on isa0060/serio1
Adding 33550332k swap on /dev/mapper/6600--vg-swap_1. Priority:-1 extents:1 across:33550332k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[357]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
EDAC MC: Ver: 3.0.0
ACPI Warning: 0x000000000000f828-0x000000000000f82f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC0: Giving out device to module i5400_edac.c controller I5400: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5400_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
input: HP WMI hotkeys as /devices/virtual/input/input5
gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
hda_codec: ALC262: SKU not ready 0x411111f0
autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
Aux=0x14
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] hdmi device not found 96 0 1
nouveau [ DEVICE][0000:60:00.0] BOOT0 : 0x049d00a2
nouveau [ DEVICE][0000:60:00.0] Chipset: G71 (NV49)
nouveau [ DEVICE][0000:60:00.0] Family : NV40
nouveau [ VBIOS][0000:60:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:60:00.0] ... appears to be valid
nouveau [ VBIOS][0000:60:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:60:00.0] BIT signature found
nouveau [ VBIOS][0000:60:00.0] version 05.71.22.60.08
nouveau 0000:60:00.0: irq 66 for MSI/MSI-X
nouveau [ PMC][0000:60:00.0] MSI interrupts enabled
nouveau [ PFB][0000:60:00.0] RAM type: GDDR3
nouveau [ PFB][0000:60:00.0] RAM size: 256 MiB
nouveau [ PFB][0000:60:00.0] ZCOMP: 294912 tags
nouveau [ VOLT][0000:60:00.0] GPU voltage: 1200000uv
nouveau [ PTHERM][0000:60:00.0] FAN control: PWM
nouveau [ PTHERM][0000:60:00.0] fan management: automatic
nouveau [ PTHERM][0000:60:00.0] internal sensor: yes
nouveau [ CLK][0000:60:00.0] 20: core 470 MHz shader 450 MHz memory 660 MHz
nouveau [ CLK][0000:60:00.0] 21: core 470 MHz shader 450 MHz memory 660 MHz
nouveau [ CLK][0000:60:00.0] --: core 450 MHz shader 450 MHz memory 661 MHz
[TTM] Zone kernel: Available graphics memory: 16474344 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 250 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 1.1
nouveau W[ DRM] TMDS table script pointers not stubbed
nouveau [ DRM] DCB version 3.0
nouveau [ DRM] DCB outp 00: 01000300 00000028
nouveau [ DRM] DCB outp 01: 03000302 00000000
nouveau [ DRM] DCB outp 02: 04011310 00000028
nouveau [ DRM] DCB outp 03: 0c011312 00000000
nouveau [ DRM] DCB conn 00: 1030
nouveau [ DRM] DCB conn 01: 2130
nouveau [ DRM] DCB conn 02: 0260
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 0xB8E5: Parsing digital output script table
nouveau [ DRM] 0xB935: Parsing digital output script table
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo ffff880036113000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
nouveau 0000:60:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:60:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:60:00.0 on minor 0
type=1400 audit(1418927224.136:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=501 comm="apparmor_parser"
type=1400 audit(1418927224.136:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
type=1400 audit(1418927224.136:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=501 comm="apparmor_parser"
type=1400 audit(1418927224.136:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
type=1400 audit(1418927224.136:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
type=1400 audit(1418927224.136:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
type=1400 audit(1418927224.136:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
type=1400 audit(1418927224.136:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=501 comm="apparmor_parser"
type=1400 audit(1418927224.136:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
type=1400 audit(1418927224.136:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
tg3 0000:0e:00.0: irq 67 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0e:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:0e:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (548) killed by TERM signal
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1418927233.728:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=920 comm="apparmor_parser"
type=1400 audit(1418927233.728:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=920 comm="apparmor_parser"
type=1400 audit(1418927233.728:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=920 comm="apparmor_parser"
type=1400 audit(1418927233.728:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=920 comm="apparmor_parser"
type=1400 audit(1418927233.728:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=920 comm="apparmor_parser"
type=1400 audit(1418927233.728:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=920 comm="apparmor_parser"
type=1400 audit(1418927233.820:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=922 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000