dmesg - procesador
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-123.9.3.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Thu Nov 6 15:06:03 UTC 2014
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.9.3.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/swap vconsole.keymap=la-latin1 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=centos/root crashkernel=auto rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007fb4ffff] usable
BIOS-e820: [mem 0x000000007fb50000-0x000000007fb65fff] reserved
BIOS-e820: [mem 0x000000007fb66000-0x000000007fb85bff] ACPI data
BIOS-e820: [mem 0x000000007fb85c00-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. PowerEdge 2900/0J7551, BIOS 2.7.0 10/30/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7fb50 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FC00000 mask FFFC00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2044MB, range: 4MB, type UC
total RAM covered: 2044M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2044MB, range: 4MB, type UC
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e20000, 0x01e20fff] PGTABLE
BRK [0x01e21000, 0x01e21fff] PGTABLE
BRK [0x01e22000, 0x01e22fff] PGTABLE
init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
[mem 0x7f800000-0x7f9fffff] page 2M
BRK [0x01e23000, 0x01e23fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
[mem 0x7c000000-0x7f7fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fa00000-0x7fb4ffff]
[mem 0x7fa00000-0x7fb4ffff] page 4k
BRK [0x01e24000, 0x01e24fff] PGTABLE
RAMDISK: [mem 0x35c52000-0x36e20fff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 2042MB)
ACPI: RSDP 00000000000f2160 00024 (v02 DELL )
ACPI: XSDT 00000000000f21fc 00084 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 000000007fb83524 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 000000007fb66000 04996 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 000000007fb85c00 00040
ACPI: APIC 000000007fb83078 000AA (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 000000007fb83130 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 000000007fb83184 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 000000007fb831c0 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 000000007fb83200 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 000000007fb83338 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 000000007fb6ab18 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 000000007fb6ad28 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 000000007fb6a998 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 000000007fb6a9c8 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 000000007fb834bc 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fb4ffff]
Initmem setup node 0 [mem 0x00000000-0x7fb4ffff]
NODE_DATA [mem 0x7fb29000-0x7fb4ffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x7fb4ffff]
On node 0 totalpages: 522991
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 8110 pages used for memmap
DMA32 zone: 518992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 32-55
ACPI: IOAPIC (id[0x04] address[0xfec83000] gsi_base[128])
IOAPIC[2]: apic_id 4, version 32, address 0xfec83000, GSI 128-151
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 168
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86656 r8192 d23936 u262144
pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514795
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.9.3.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/swap vconsole.keymap=la-latin1 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=centos/root crashkernel=auto rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 1860180k/2092352k available (6108k kernel code, 388k absent, 231784k reserved, 4071k data, 1584k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-7.
NR_IRQS:327936 nr_irqs:2048 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.539 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.07 BogoMIPS (lpj=1596539)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 23393 entries in 92 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (6386.15 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge 2900 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88007c373488), AE_NOT_FOUND (20130517/psparse-536)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25e4] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xcce0-0xccff]
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xccc0-0xccdf]
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xcca0-0xccbf]
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xcc80-0xcc9f]
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfc600000-0xfc6003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0xfc00-0xfc0f]
pci 0000:06:00.0: [8086:3500] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: [8086:350c] type 01 class 0x060400
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 06-0b]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
pci 0000:07:00.0: [8086:3510] type 01 class 0x060400
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: [8086:3514] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0a]
pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:08:00.0: [1166:0103] type 01 class 0x060400
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08-09]
pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:09:00.0: [14e4:164c] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:07:01.0: PCI bridge to [bus 0a]
pci 0000:0b:02.0: [9005:8016] type 00 class 0x010000
pci 0000:0b:02.0: reg 0x10: [io 0xec00-0xecff]
pci 0000:0b:02.0: reg 0x14: [mem 0xf3f7e000-0xf3f7ffff 64bit]
pci 0000:0b:02.0: reg 0x1c: [io 0xe800-0xe8ff]
pci 0000:0b:02.0: reg 0x30: [mem 0xf3e00000-0xf3e7ffff pref]
pci 0000:0b:02.1: [9005:8016] type 00 class 0x010000
pci 0000:0b:02.1: reg 0x10: [io 0xe400-0xe4ff]
pci 0000:0b:02.1: reg 0x14: [mem 0xf3f7c000-0xf3f7dfff 64bit]
pci 0000:0b:02.1: reg 0x1c: [io 0xe000-0xe0ff]
pci 0000:0b:02.1: reg 0x30: [mem 0xf3e00000-0xf3e7ffff pref]
pci 0000:06:00.3: PCI bridge to [bus 0b]
pci 0000:06:00.3: bridge window [io 0xe000-0xefff]
pci 0000:06:00.3: bridge window [mem 0xf3e00000-0xf3ffffff]
pci 0000:00:03.0: PCI bridge to [bus 0c]
pci 0000:00:04.0: PCI bridge to [bus 0d]
pci 0000:01:00.0: [8086:0370] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: [8086:0372] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 01-03]
pci 0000:00:05.0: bridge window [mem 0xfc300000-0xfc5fffff]
pci 0000:00:05.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
pci 0000:02:0e.0: [1028:0015] type 00 class 0x010400
pci 0000:02:0e.0: reg 0x10: [mem 0xd80f0000-0xd80fffff pref]
pci 0000:02:0e.0: reg 0x18: [mem 0xfc5c0000-0xfc5dffff]
pci 0000:02:0e.0: reg 0x30: [mem 0xfc400000-0xfc407fff pref]
pci 0000:02:0e.0: supports D1
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
pci 0000:01:00.2: PCI bridge to [bus 03]
pci 0000:00:06.0: PCI bridge to [bus 0e]
pci 0000:00:07.0: PCI bridge to [bus 0f]
pci 0000:04:00.0: [1166:0103] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:05:00.0: [14e4:164c] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:10:0d.0: [1002:515e] type 00 class 0x030000
pci 0000:10:0d.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:10:0d.0: reg 0x14: [io 0xdc00-0xdcff]
pci 0000:10:0d.0: reg 0x18: [mem 0xfc2d0000-0xfc2dffff]
pci 0000:10:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:10:0d.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:10:0d.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7fb50000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io 0x0800-0x087f] could not be reserved
system 00:07: [io 0x0880-0x08bf] has been reserved
system 00:07: [io 0x08c0-0x08df] has been reserved
system 00:07: [io 0x08e0-0x08e3] has been reserved
system 00:07: [io 0x0900] has been reserved
system 00:07: [io 0x0c00-0x0c7f] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:0b:02.1: address space collision: [mem 0xf3e00000-0xf3e7ffff pref] conflicts with 0000:0b:02.0 [mem 0xf3e00000-0xf3e7ffff pref]
pci 0000:00:02.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:06:00.3: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:07:00.0: PCI bridge to [bus 08-09]
pci 0000:07:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:07:01.0: PCI bridge to [bus 0a]
pci 0000:06:00.0: PCI bridge to [bus 07-0a]
pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:0b:02.1: BAR 6: assigned [mem 0x80000000-0x8007ffff pref]
pci 0000:06:00.3: PCI bridge to [bus 0b]
pci 0000:06:00.3: bridge window [io 0xe000-0xefff]
pci 0000:06:00.3: bridge window [mem 0xf3e00000-0xf3ffffff]
pci 0000:06:00.3: bridge window [mem 0x80000000-0x800fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 06-0b]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
pci 0000:00:02.0: bridge window [mem 0x80000000-0x800fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 0c]
pci 0000:00:04.0: PCI bridge to [bus 0d]
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:01:00.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
pci 0000:01:00.2: PCI bridge to [bus 03]
pci 0000:00:05.0: PCI bridge to [bus 01-03]
pci 0000:00:05.0: bridge window [mem 0xfc300000-0xfc5fffff]
pci 0000:00:05.0: bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 0e]
pci 0000:00:07.0: PCI bridge to [bus 0f]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:10:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 10]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xf2000000-0xf7ffffff]
pci_bus 0000:06: resource 2 [mem 0x80000000-0x800fffff pref]
pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:08: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:09: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0b: resource 1 [mem 0xf3e00000-0xf3ffffff]
pci_bus 0000:0b: resource 2 [mem 0x80000000-0x800fffff pref]
pci_bus 0000:01: resource 1 [mem 0xfc300000-0xfc5fffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfc400000-0xfc5fffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:10: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:10: resource 1 [mem 0xfc100000-0xfc2fffff]
pci_bus 0000:10: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:10: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:10: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:10: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:10: resource 7 [mem 0x80000000-0xfdffffff]
pci_bus 0000:10: resource 8 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:00.0: rerouting interrupts for [8086:0370]
pci 0000:01:00.2: rerouting interrupts for [8086:0372]
pci 0000:10:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18236k freed
microcode: CPU0 sig=0x6f6, pf=0x4, revision=0xd2
microcode: CPU1 sig=0x6f6, pf=0x4, revision=0xd2
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1417565314.699:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3668
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: device [8086:25e2] has invalid IRQ; check vendor BIOS
pcieport 0000:00:02.0: irq 168 for MSI/MSI-X
pcieport 0000:00:03.0: device [8086:25e3] has invalid IRQ; check vendor BIOS
pcieport 0000:00:03.0: irq 169 for MSI/MSI-X
pcieport 0000:00:04.0: device [8086:25e4] has invalid IRQ; check vendor BIOS
pcieport 0000:00:04.0: irq 170 for MSI/MSI-X
pcieport 0000:00:05.0: device [8086:25e5] has invalid IRQ; check vendor BIOS
pcieport 0000:00:05.0: irq 171 for MSI/MSI-X
pcieport 0000:00:06.0: device [8086:25f9] has invalid IRQ; check vendor BIOS
pcieport 0000:00:06.0: irq 172 for MSI/MSI-X
pcieport 0000:00:07.0: irq 173 for MSI/MSI-X
pcieport 0000:00:1c.0: device [8086:2690] has invalid IRQ; check vendor BIOS
pcieport 0000:00:1c.0: irq 174 for MSI/MSI-X
pcieport 0000:06:00.0: device [8086:3500] has invalid IRQ; check vendor BIOS
pcieport 0000:07:00.0: device [8086:3510] has invalid IRQ; check vendor BIOS
pcieport 0000:07:01.0: device [8086:3514] has invalid IRQ; check vendor BIOS
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:00.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
pci 0000:0b:02.0: Signaling PME through PCIe PME interrupt
pci 0000:0b:02.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0e.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xfc600000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-123.9.3.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-123.9.3.el7.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-123.9.3.el7.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-123.9.3.el7.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cc80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-123.9.3.el7.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 50abeab90c22afed730453ea4cf18dc98b375e7f'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2014-12-03 00:08:35 UTC (1417565315)
Freeing unused kernel memory: 1584k freed
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Expecting device dev-mapper-centos\x2droot.device...
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[101]: Vacuuming done, freed 0 bytes
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
usb 1-7: new high-speed USB device number 2 using ehci-pci
systemd-udevd[249]: starting version 208
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5 (December 20, 2013)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
megaraid_sas 0000:02:0e.0: PCI IRQ 142 -> rerouted to legacy IRQ 18
usb 1-7: New USB device found, idVendor=04b4, idProduct=6560
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
[drm] Initialized drm 1.1.0 20060810
megasas: FW now in Ready state
ACPI: bus type ATA registered
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
[drm] radeon kernel modesetting enabled.
scsi2 : ata_piix
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B1).
[drm] register mmio base: 0xFC2D0000
[drm] register mmio size: 65536
radeon 0000:10:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
radeon 0000:10:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 940012 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000035C80000).
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
scsi3 : ata_piix
radeon 0000:10:0d.0: WB disabled
radeon 0000:10:0d.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff880036711000
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
ata2: port disabled--ignoring
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
megaraid_sas 0000:02:0e.0: Controller type: MR,Memory size is: 256MB
scsi0 : LSI SAS based MegaRAID driver
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi 0:0:0:0: Direct-Access SEAGATE ST3300657SS ES64 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access SEAGATE ST3300555SS T211 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access SEAGATE ST3300555SS T211 PQ: 0 ANSI: 5
Console: switching to colour frame buffer device 128x48
radeon 0000:10:0d.0: fb0: radeondrmfb frame buffer device
radeon 0000:10:0d.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:10:0d.0 on minor 0
ata1.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H492C, DE02, max UDMA/33
ata1.00: configured for UDMA/33
scsi: waiting for bus probes to complete ...
bnx2 0000:05:00.0 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:18:8b:33:95:ca
scsi 0:0:8:0: Enclosure DP BACKPLANE 1.00 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H492C DE02 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:2:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
tsc: Refined TSC clocksource calibration: 1596.477 MHz
Switching to clocksource tsc
bnx2 0000:09:00.0 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:18:8b:33:95:cc
systemd-udevd[254]: renamed network interface eth1 to eno2
systemd-udevd[252]: renamed network interface eth0 to eno1
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
scsi target1:0:6: asynchronous
scsi 1:0:6:0: Sequential-Access IBM ULTRIUM-HH3 93G7 PQ: 0 ANSI: 3
scsi target1:0:6: Beginning Domain Validation
scsi target1:0:6: wide asynchronous
scsi target1:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
scsi target1:0:6: Domain Validation skipping write tests
scsi target1:0:6: Ending Domain Validation
scsi4 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
bio: create slab at 1
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
XFS (dm-1): Mounting Filesystem
XFS (dm-1): Ending clean mount
systemd-journald[101]: Received SIGTERM
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1417565350.421:2): selinux=0 auid=4294967295 ses=4294967295
systemd-journald[492]: Vacuuming done, freed 0 bytes
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
systemd-udevd[535]: starting version 208
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi message handler version 39.2
st: Version 20101219, fixed bufsize 32768, s/g segs 256
st 1:0:6:0: Attached scsi tape st0
st 1:0:6:0: st0: try direct i/o: yes (alignment 4 B)
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
intel_rng: FWH not detected
input: PC Speaker as /devices/platform/pcspkr/input/input1
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ses 0:0:8:0: Attached Enclosure device
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ipmi device interface
XFS (sda1): Mounting Filesystem
Adding 2113532k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:2113532k FS
XFS (dm-2): Mounting Filesystem
XFS (dm-2): Ending clean mount
XFS (sda1): Ending clean mount
systemd-journald[492]: Received request to flush runtime journal from PID 1
type=1305 audit(1417565354.801:3): audit_pid=622 old=0 auid=4294967295 ses=4294967295 res=1
ses 0:0:8:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
st 1:0:6:0: Attached scsi generic sg3 type 1
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
bnx2 0000:05:00.0: irq 175 for MSI/MSI-X
bnx2 0000:05:00.0 eno1: using MSI
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
bnx2 0000:09:00.0: irq 176 for MSI/MSI-X
bnx2 0000:09:00.0 eno2: using MSI
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
bnx2 0000:05:00.0 eno1: NIC Copper Link is Up, 100 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
Adjusting tsc more than 11% (11689065 vs 11664877)
XClipboard[3403]: segfault at 10 ip 000000000045140c sp 00007fd41184cc50 error 4 in TVGuiSlave.64[400000+30b000]
fuse init (API version 7.22)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
TCP: lp registered
perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5001 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
XClipboard[9392]: segfault at 10 ip 000000000045140c sp 00007f712e3dfc50 error 4 in TVGuiSlave.64[400000+30b000]
XClipboard[14963]: segfault at 10 ip 000000000045140c sp 00007f2fc7ffec50 error 4 in TVGuiSlave.64[400000+30b000]