dmesg - 3.2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-70-generic (buildd@tipua) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #105-Ubuntu SMP Wed Sep 24 19:49:16 UTC 2014 (Ubuntu 3.2.0-70.105-generic 3.2.63)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006ffe0000 (usable)
BIOS-e820: 000000006ffe0000 - 000000006ffe3000 (ACPI NVS)
BIOS-e820: 000000006ffe3000 - 000000006fff0000 (ACPI data)
BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Unknow Unknow/LP JR 790GX, BIOS 6.00 PG 08/28/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x6ffe0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFFC0000000 write-back
1 base 000040000000 mask FFFFE0000000 write-back
2 base 000060000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f4c00] f4c00
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000006ffe0000
0000000000 - 0040000000 page 1G
0040000000 - 006fe00000 page 2M
006fe00000 - 006ffe0000 page 4k
kernel direct mapping tables up to 6ffe0000 @ 1fffd000-20000000
RAMDISK: 364c6000 - 3725b000
ACPI: RSDP 00000000000f8c70 00024 (v02 RS780D)
ACPI: RSDT 000000006ffe3000 00034 (v01 RS780D AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000006ffe3080 00074 (v01 RS780D AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000006ffe3100 08729 (v01 RS780D AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 000000006ffe0000 00040
ACPI: HPET 000000006ffeb900 00038 (v01 RS780D AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 000000006ffeb940 0003C (v01 RS780D AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000006ffeb840 00084 (v01 RS780D AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000006ffe0000
Initmem setup node 0 0000000000000000-000000006ffe0000
NODE_DATA [000000006ffdb000 - 000000006ffdffff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0006ffe0
On node 0 totalpages: 458607
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 7104 pages used for memmap
DMA32 zone: 447520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 70000000 (gap: 70000000:70000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88006fc00000 s83136 r8192 d23360 u524288
pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 451434
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 8800000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 1775564k/1834880k available (6597k kernel code, 452k absent, 58864k reserved, 6609k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3200.088 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.17 BogoMIPS (lpj=12800352)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 26609 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
#3 Ok.
smpboot cpu 3: start_ip = 9a000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (25605.01 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 6ffe0000 (12288 bytes)
print_constraints: dummy:
RTC time: 23:22:39, date: 12/05/14
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 0000000080000000 aka 2048M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x80000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0400000-0xfcffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
Extended Config Space enabled on 1 nodes
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:05.0: [1002:9614] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff]
pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff]
pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:03:05.0: [14f1:5b7a] type 0 class 0x000400
pci 0000:03:05.0: reg 10: [mem 0xf8000000-0xfbffffff]
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf8000000-0xfbffffff]
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 000000006ffe0000 - 000000006fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Freeing initrd memory: 13908k freed
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x4100-0x411f]
pnp 00:01: [io 0x0228-0x022f]
pnp 00:01: [io 0x040b]
pnp 00:01: [io 0x04d6]
pnp 00:01: [io 0x0c00-0x0c01]
pnp 00:01: [io 0x0c14]
pnp 00:01: [io 0x0c50-0x0c52]
pnp 00:01: [io 0x0c6c-0x0c6d]
pnp 00:01: [io 0x0c6f]
pnp 00:01: [io 0x0cd0-0x0cd1]
pnp 00:01: [io 0x0cd2-0x0cd3]
pnp 00:01: [io 0x0cd4-0x0cdf]
pnp 00:01: [io 0x4000-0x40fe]
pnp 00:01: [io 0x4210-0x4217]
pnp 00:01: [io 0x0b10-0x0b1f]
pnp 00:01: [mem 0x00000000-0x00000fff window]
pnp 00:01: [mem 0xfee00400-0xfee00fff window]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] has been reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0074-0x007f]
pnp 00:07: [io 0x0091-0x0093]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0290-0x0297]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0290-0x0297] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x02f8-0x02ff]
pnp 00:0a: [irq 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0510 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0c: [mem 0x000f0000-0x000fffff]
pnp 00:0c: [mem 0xfed00000-0xfed000ff]
pnp 00:0c: [mem 0x6ffe0000-0x6fffffff]
pnp 00:0c: [mem 0xffff0000-0xffffffff]
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x00100000-0x6ffdffff]
pnp 00:0c: [mem 0x70000000-0x7fffffff]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
pnp 00:0c: [mem 0xfff80000-0xfffeffff]
pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0x6ffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0c: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:0c: [mem 0x6ffe0000-0x6fffffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0x70000000-0x7fffffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 32 bytes, default 64
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
audit: initializing netlink socket (disabled)
type=2000 audit(1417821758.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 3495
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
ACPI: [Package] has zero elements (ffff880069a81180)
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 10:675:402
rtc_cmos 00:04: setting system clock to 2014-12-05 23:22:39 UTC (1417821759)
powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying PMP SRST workaround and retrying
usb 3-3: new low-speed USB device number 2 using ohci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD10EADS-65L5B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-65L 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1576k freed
Freeing unused kernel memory: 1184k freed
udevd[102]: starting version 175
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input3
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sky2: driver version 1.30
sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
sky2 0000:02:00.0: irq 41 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:01:29:a6:24:b0
Refined TSC clocksource calibration: 3200.112 MHz.
Switching to clocksource tsc
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
FDC 0 is a post-1991 82077
ata6.00: ATAPI: SONY DVD RW DRU-830A, SS25, max UDMA/66
ata6.01: ATA-5: WDC WD600BB-00CAA1, 17.07W17, max UDMA/100
ata6.01: 117231408 sectors, multi 16: LBA
ata6.00: configured for UDMA/66
ata6.01: configured for UDMA/100
scsi 5:0:0:0: CD-ROM SONY DVD RW DRU-830A SS25 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
scsi 5:0:1:0: Direct-Access ATA WDC WD600BB-00CA 17.0 PQ: 0 ANSI: 5
sd 5:0:1:0: [sdc] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 5:0:1:0: Attached scsi generic sg3 type 0
sd 5:0:1:0: [sdc] Write Protect is off
sd 5:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 >
sd 5:0:1:0: [sdc] Attached SCSI disk
EXT4-fs (sdc5): INFO: recovery required on readonly filesystem
EXT4-fs (sdc5): write access will be enabled during recovery
EXT4-fs (sdc5): orphan cleanup on readonly fs
EXT4-fs (sdc5): ext4_orphan_cleanup: deleting unreferenced inode 1061937
EXT4-fs (sdc5): ext4_orphan_cleanup: deleting unreferenced inode 1046590
EXT4-fs (sdc5): ext4_orphan_cleanup: deleting unreferenced inode 1046587
EXT4-fs (sdc5): ext4_orphan_cleanup: deleting unreferenced inode 1046586
EXT4-fs (sdc5): ext4_orphan_cleanup: deleting unreferenced inode 1046579
EXT4-fs (sdc5): ext4_orphan_cleanup: deleting unreferenced inode 1046566
EXT4-fs (sdc5): 6 orphan inodes deleted
EXT4-fs (sdc5): recovery complete
EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
Adding 2928636k swap on /dev/sdc1. Priority:-1 extents:1 across:2928636k
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[488]: starting version 175
lp: driver loaded but no devices found
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
it87: Found IT8716F chip at 0x228, revision 3
ACPI: resource it87 [io 0x022d-0x022e] conflicts with ACPI region IP__ [io 0x22d-0x22e]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
wmi: Mapper loaded
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
type=1400 audit(1417821783.317:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=578 comm="apparmor_parser"
type=1400 audit(1417821783.317:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=578 comm="apparmor_parser"
type=1400 audit(1417821783.317:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=578 comm="apparmor_parser"
type=1400 audit(1417821783.321:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=613 comm="apparmor_parser"
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1002:0x0000).
[drm] register mmio base: 0xFDFF0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 384M 0x00000000C0000000 - 0x00000000D7FFFFFF (384M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=384M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 896580 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 384M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
Linux video capture interface: v2.00
cx18: Start initialization, version 1.5.1
cx18-0: Initializing card 0
cx18-0: Autodetected Hauppauge card
cx18 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
cx18-0: cx23418 revision 01010000 (B)
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_codec: ALC889A: BIOS auto-probing.
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[drm] ring test succeeded in 1 usecs
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
tveeprom 6-0050: Hauppauge model 74541, rev C6B6, serial# 6570373
tveeprom 6-0050: MAC address is 00:0d:fe:64:41:85
tveeprom 6-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43)
tveeprom 6-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 6-0050: audio processor is CX23418 (idx 38)
tveeprom 6-0050: decoder processor is CX23418 (idx 31)
tveeprom 6-0050: has radio
cx18-0: Autodetected Hauppauge HVR-1600
cx18-0: Simultaneous Digital and Analog TV capture supported
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 7680000
[drm] fb depth is 24
[drm] pitch is 6400
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x75
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
tda9887 7-0043: creating new instance
tda9887 7-0043: tda988[5/6/7] found
tuner 7-0043: Tuner 74 found with type(s) Radio TV.
tuner 7-0061: Tuner -1 found with type(s) Radio TV.
cs5345 6-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
tuner-simple 7-0061: creating new instance
tuner-simple 7-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
DVB: registering new adapter (cx18)
MXL5005S: Attached at address 0x63
DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx18-0: DVB Frontend registered
cx18-0: Registered DVB adapter0 for TS (32 x 32.00 kB)
cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
cx18-0: Registered device radio0 for encoder radio
cx18-0: Initialized card: Hauppauge HVR-1600
cx18: End initialization
cx18-alsa: module loading...
cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
EXT4-fs (sdc5): re-mounted. Opts: errors=remount-ro
cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
init: statd-mounting main process (925) killed by TERM signal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): recovery complete
EXT3-fs (sdb1): mounted filesystem with ordered data mode
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input12
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (979) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
type=1400 audit(1417821784.673:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser"
type=1400 audit(1417821784.673:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser"
type=1400 audit(1417821784.701:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1089 comm="apparmor_parser"
type=1400 audit(1417821784.701:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1088 comm="apparmor_parser"
type=1400 audit(1417821784.701:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1089 comm="apparmor_parser"
type=1400 audit(1417821784.701:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1088 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
sky2 0000:02:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x553 offMax=0x3a46
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1897) terminated with status 1
sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present