dmesg - eagle
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-504.1.3.el6.i686 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Nov 11 16:30:09 UTC 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
BIOS-e820: 000000003ffae000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xFC080
DMI: System manufacturer System Product Name/P5L1394, BIOS 0601 06/08/2007
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3ffa0 max_arch_pfn = 0x400000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-19000
RAMDISK: 36e92000 - 37fefbe7
Allocated new RAMDISK: 00cad000 - 01e0abe7
Move RAMDISK from 0000000036e92000 - 0000000037fefbe6 to 00cad000 - 01e0abe6
ACPI: RSDP 000fb110 00024 (v02 ACPIAM)
ACPI: XSDT 3ffa0100 0005C (v01 A_M_I_ OEMXSDT 06000708 MSFT 00000097)
ACPI: FACP 3ffa0290 000F4 (v03 A_M_I_ OEMFACP 06000708 MSFT 00000097)
ACPI: DSDT 3ffa0590 059A4 (v01 A0603 A0603000 00000000 INTL 20060113)
ACPI: FACS 3ffae000 00040
ACPI: APIC 3ffa0390 00080 (v01 A_M_I_ OEMAPIC 06000708 MSFT 00000097)
ACPI: OEMB 3ffae040 0006B (v01 A_M_I_ AMI_OEM 06000708 MSFT 00000097)
ACPI: HPET 3ffa5f40 00038 (v01 A_M_I_ OEMHPET 06000708 MSFT 00000097)
ACPI: MCFG 3ffa5f80 0003C (v01 A_M_I_ OEMMCFG 06000708 MSFT 00000097)
ACPI: SSDT 3ffae0b0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 3ffae2c0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Local APIC address 0xfee00000
137MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000ca3070] TEXT DATA BSS ==> [0000400000 - 0000ca3070]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000ca4000 - 0000cac296] BRK ==> [0000ca4000 - 0000cac296]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000cad000 - 0001e0abe7] NEW RAMDISK ==> [0000cad000 - 0001e0abe7]
#8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
found SMP MP-table at [c00ff780] ff780
Reserving 128MB of memory at 32MB for crashkernel (System RAM: 1023MB)
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0003ffa0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003ffa0
On node 0 totalpages: 261935
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 276 pages used for memmap
HighMem zone: 34958 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bff80000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @ca800000 s36280 r0 d21064 u524288
pcpu-alloc: s36280 r0 d21064 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259887
Kernel command line: ro root=/dev/mapper/vg_centos-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_centos/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_centos/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000375fe:0003ffa0)
Memory: 880012k/1048192k available (4516k kernel code, 167140k reserved, 2582k data, 532k init, 140936k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc0aef000 - 0xc0b74000 ( 532 kB)
.data : 0xc08691a8 - 0xc0aeeac8 (2582 kB)
.text : 0xc0400000 - 0xc08691a8 (4516 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:440
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2206.729 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4413.45 BogoMIPS (lpj=2206729)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Booting Node 0, Processors #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (8826.91 BogoMIPS).
sizeof(vma)=100 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=1348 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 3ffae000 (270336 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - 0x2B, should be 0x26 (20090903/tbutils-314)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40010000-0xffffffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:1b.0: reg 10: [mem 0xe7ff8000-0xe7ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x6000-0x601f]
pci 0000:00:1d.1: reg 20: [io 0x6400-0x641f]
pci 0000:00:1d.2: reg 20: [io 0x6800-0x681f]
pci 0000:00:1d.3: reg 20: [io 0x7000-0x701f]
pci 0000:00:1d.7: reg 10: [mem 0xe7fffc00-0xe7ffffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 14: [io 0x8400-0x8403]
pci 0000:00:1f.2: reg 18: [io 0x8000-0x8007]
pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
pci 0000:00:1f.2: reg 20: [io 0x7400-0x740f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:04:00.0: reg 10: [mem 0xeefc0000-0xeeffffff 64bit]
pci 0000:04:00.0: reg 30: [mem 0xeefa0000-0xeefbffff pref]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xeef00000-0xeeffffff]
pci 0000:03:00.0: reg 10: [io 0xc800-0xc807]
pci 0000:03:00.0: reg 14: [io 0xc400-0xc403]
pci 0000:03:00.0: reg 18: [io 0xc000-0xc007]
pci 0000:03:00.0: reg 1c: [io 0xb800-0xb803]
pci 0000:03:00.0: reg 20: [io 0xb400-0xb40f]
pci 0000:03:00.0: reg 24: [mem 0xeeefe000-0xeeefffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xb000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xeee00000-0xeeefffff]
pci 0000:01:04.0: reg 10: [mem 0xeedef800-0xeedeffff]
pci 0000:01:04.0: reg 14: [io 0x9800-0x987f]
pci 0000:01:04.0: supports D2
pci 0000:01:04.0: PME# supported from D2 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:09.0: reg 10: [mem 0xe8000000-0xebffffff]
pci 0000:01:09.0: reg 30: [mem 0xeedf0000-0xeedfffff pref]
pci 0000:01:0a.0: supports D1 D2
pci 0000:01:0a.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:0a.0: PME# disabled
pci 0000:01:0b.0: reg 10: [mem 0xefefe000-0xefefefff pref]
pci 0000:01:0b.1: reg 10: [mem 0xefeff000-0xefefffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x9000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xeedfffff]
pci 0000:00:1e.0: bridge window [mem 0xefe00000-0xefffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci 0000:02:0c.0: reg 10: [mem 0xefff8000-0xefff8fff pref]
pci 0000:02:0c.1: reg 10: [mem 0xefff9000-0xefff9fff pref]
pci 0000:02:0d.0: reg 10: [mem 0xefffa000-0xefffafff pref]
pci 0000:02:0d.1: reg 10: [mem 0xefffb000-0xefffbfff pref]
pci 0000:02:0e.0: reg 10: [mem 0xefffc000-0xefffcfff pref]
pci 0000:02:0e.1: reg 10: [mem 0xefffd000-0xefffdfff pref]
pci 0000:02:0f.0: reg 10: [mem 0xefffe000-0xefffefff pref]
pci 0000:02:0f.1: reg 10: [mem 0xeffff000-0xefffffff pref]
pci 0000:01:0a.0: PCI bridge to [bus 02-02]
pci 0000:01:0a.0: bridge window [io 0xa000-0xafff]
pci 0000:01:0a.0: bridge window [mem 0xeff00000-0xefffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:09.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:09.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed13000-0xfed19fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [irq 7]
pnp 00:06: [dma 0 disabled]
pnp 00:06: [io 0x0378-0x037f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0290-0x0297]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0480-0x04bf]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed8ffff]
pnp 00:08: [mem 0xffb00000-0xffbfffff]
pnp 00:08: [mem 0xfff00000-0xfffffffe]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000dffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0x3fffffff]
pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:07: [io 0x0290-0x0297] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:08: [mem 0xfff00000-0xfffffffe] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x3fffffff] could not be reserved
pci 0000:01:09.0: address space collision: [mem 0xeedf0000-0xeedfffff pref] conflicts with PCI Bus 0000:01 [mem 0xe8000000-0xeedfffff]
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xeef00000-0xeeffffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-03]
pci 0000:00:1c.3: bridge window [io 0xb000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xeee00000-0xeeefffff]
pci 0000:01:09.0: BAR 6: assigned [mem 0xefe00000-0xefe0ffff pref]
pci 0000:01:0a.0: PCI bridge to [bus 02-02]
pci 0000:01:0a.0: bridge window [io 0xa000-0xafff]
pci 0000:01:0a.0: bridge window [mem 0xeff00000-0xefffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-02]
pci 0000:00:1e.0: bridge window [io 0x9000-0xafff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xeedfffff]
pci 0000:00:1e.0: bridge window [mem 0xefe00000-0xefffffff 64bit pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:05: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xeef00000-0xeeffffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xeee00000-0xeeefffff]
pci_bus 0000:01: resource 0 [io 0x9000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xe8000000-0xeedfffff]
pci_bus 0000:01: resource 2 [mem 0xefe00000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 2 [mem 0xeff00000-0xefffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:09.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17782k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
futex hash table entries: 1024 (order: 3, 32768 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1417081060.474:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1479
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 475D931F1CA9D228
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node f704a950), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node f704a968), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node f704a878), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node f704a890), AE_ALREADY_EXISTS
ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe7fffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-504.1.3.el6.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-504.1.3.el6.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-504.1.3.el6.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-504.1.3.el6.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00007000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-504.1.3.el6.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-11-27 09:37:42 UTC (1417081062)
Initalizing network drop monitor service
Freeing unused kernel memory: 532k freed
Write protecting the kernel text: 4520k
Write protecting the kernel read-only data: 1988k
dracut: dracut-004-356.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xeeefe000 port 0xeeefe100 irq 19
Refined TSC clocksource calibration: 2206.874 MHz.
Switching to clocksource tsc
ata1: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.13
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8400 bmdma 0x7400 irq 23
ata5: SATA max UDMA/133 cmd 0x8000 ctl 0x7800 bmdma 0x7408 irq 23
ata4.00: HPA detected: current 488395055, native 488397168
ata4.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7
ata4.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5
firewire_ohci 0000:01:04.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI version 1.10
STARTING CRC_T10DIF
sd 3:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_centos/lv_swap vg_centos/lv_root
dracut: inactive '/dev/vg_centos/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_centos/lv_home' [179.43 GiB] inherit
dracut: inactive '/dev/vg_centos/lv_swap' [2.97 GiB] inherit
firewire_core: created device fw0: GUID 0011d800003594f3, S400
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 659963
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 659962
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 659960
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 655397
EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 655363
EXT4-fs (dm-0): 5 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_centos-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1417081065.581:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 27 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
atl1 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
atl1 0000:04:00.0: setting latency timer to 64
atl1 0000:04:00.0: version 2.1.3
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sd 3:0:0:0: Attached scsi generic sg0 type 0
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
platform microcode: firmware: requesting intel-ucode/06-0f-0d
udev: renamed network interface eth0 to eth1
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
platform microcode: firmware: requesting intel-ucode/06-0f-0d
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 3112956k swap on /dev/mapper/vg_centos-lv_swap. Priority:-1 extents:1 across:3112956k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (14045 buckets, 56180 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1305 audit(1417081076.010:3): audit_pid=1339 old=0 auid=4294967295 ses=4294967295 res=1
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
atl1 0000:04:00.0: irq 28 for MSI/MSI-X
atl1 0000:04:00.0: eth1 link is up 100 Mbps full duplex
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
Linux video capture interface: v2.00
lirc_dev: IR Remote Control driver registered, major 247
bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:01:0b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 22, latency: 64, mmio: 0xefefe000
bttv0: detected: Provideo PV143A [card=105], PCI subsystem ID is aa00:1430
bttv0: using: ProVideo PV143 [card=105,insmod option]
IRQ 22/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: tuner absent
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 ..
bttv0: PLL: 28636363 => 35468950 .
bttv0: PLL: 28636363 => 35468950 . ok
IR LIRC bridge handler initialized
ok
bttv: Bt8xx card found (1).
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
bttv 0000:02:0c.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bttv1: Bt878 (rev 17) at 0000:02:0c.0, irq: 21, latency: 64, mmio: 0xefff8000
bttv1: using: Geovision GV-600 [card=150,insmod option]
IRQ 21/bttv1: IRQF_DISABLED is not guaranteed on shared IRQs
bttv1: gpio: en=00000000, out=00000000 in=00fffcff [init]
bttv1: tuner absent
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 . ok
bttv1: PLL: 28636363 => 35468950 .
bttv1: PLL: 28636363 => 35468950 .. ok
ok
ok
bttv: Bt8xx card found (2).
bttv 0000:02:0d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
bttv2: Bt878 (rev 17) at 0000:02:0d.0, irq: 22, latency: 64, mmio: 0xefffa000
bttv2: using: Geovision GV-600 [card=150,insmod option]
IRQ 22/bttv2: IRQF_DISABLED is not guaranteed on shared IRQs
bttv2: gpio: en=00000000, out=00000000 in=00fffcff [init]
bttv2: tuner absent
bttv2: registered device video2
bttv2: registered device vbi2
bttv2: PLL: 28636363 => 35468950 .
bttv2: PLL: 28636363 => 35468950 .
bttv2: PLL: 28636363 => 35468950 .. ok
ok
ok
bttv: Bt8xx card found (3).
bttv 0000:02:0e.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
bttv3: Bt878 (rev 17) at 0000:02:0e.0, irq: 23, latency: 64, mmio: 0xefffc000
bttv3: using: Geovision GV-600 [card=150,insmod option]
IRQ 23/bttv3: IRQF_DISABLED is not guaranteed on shared IRQs
bttv3: gpio: en=00000000, out=00000000 in=00fffcff [init]
bttv3: tuner absent
bttv3: registered device video3
bttv3: registered device vbi3
bttv3: PLL: 28636363 => 35468950 .
bttv3: PLL: 28636363 => 35468950 .
bttv3: PLL: 28636363 => 35468950 .. ok
ok
ok
bttv: Bt8xx card found (4).
bttv 0000:02:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
bttv4: Bt878 (rev 17) at 0000:02:0f.0, irq: 20, latency: 64, mmio: 0xefffe000
bttv4: using: Geovision GV-600 [card=150,insmod option]
IRQ 20/bttv4: IRQF_DISABLED is not guaranteed on shared IRQs
bttv4: gpio: en=00000000, out=00000000 in=00fffcff [init]
bttv4: tuner absent
bttv4: registered device video4
bttv4: registered device vbi4
bttv4: PLL: 28636363 => 35468950 .
bttv4: PLL: 28636363 => 35468950
bttv4: PLL: 28636363 => 35468950 ... ok
ok
ok
eth1: no IPv6 routers present